NBS Source
I'm a manufacturer

Polibrid® 705E Elastomeric Waterproofing System

Verified by manufacturer over a year ago

International Coatings

High build elastomeric urethane waterproofing system.

Jump to:
+61 3 9313 4501 Website

Application

Suitable for concrete surfaces without blow holes or voids. Any such defect should be treated using the appropriate Intercrete products prior to the application of Polibrid 705E.


Coating application:

  • 1st coat: Intercure 200HS. DFT: 125 microns.
  • 2nd coat: Polibrid 105E. DFT: 2000 microns.

Description

Polibrid® 705E is a high build elastomeric urethane waterproofing system designed with flexibility and fast setting properties. Some of its features include:

  • Corrosion protection for concrete in chemical, abrasion and high impact applications.
  • Capable of withstanding shrinkage cracks.
  • Can be applied at any thickness for ultimate protection in corrosive environments.
  • Can be embedded with geotextile fabrics to achieve reinforced geomembrane linings.
  • Fast setting, odourless and VOC-free mixture.

General information

Color

Beige

Finish

Smooth

Material

Polyurethane (PUR)

Warranty description

-

Manufacturer guidance

Refer to International Protective Coatings for further details relating to performance warranty.

Uniclass

Ss_40_90_60_85 Special coating systemsPrimary

NATSPEC National Classification System

0671 Painting

SpecPack

09910 Painting

SpeedSpec

09910 Painting

Specification data - Special coating systems

Preparation

All surfaces to be prepared in accordance with the coating manufacturer's written instructions.

Primer coats

Intercure 200HS. DFT: 125 microns.

Manufacturer guidance

Apply as full coat.

Finishing coats

Polibrid 705E. DFT: 2000 microns.

Manufacturer guidance

Apply as full coat.

Execution

Applied in accordance with the coating manufacturer's written instructions.

Surface material

Concrete should be free from defects such as blow holes and voids. Any such defect should be treated using the appropriate Intercrete products prior to the application of Polibrid 705E. Surface preparation should be done in accordance with ICRI Technical Guidelines, CSP-4 to CSP-6. Refer to International Protective Coatings for full surface preparation requirements prior to commencement of work.

Application temperature

5°C–60°C.

Colour

Buff.

Volatile organic compound (VOC)

None.

Manufacturer guidance

Refers to values for Polibrid 705E only, EPA Method 24.

Sustainability data

Contains Red List materials

No

Country of material origin

United States

Country of product manufacture

United States

Literature

Polibrid® 705E

Polibrid® 705E

Polibrid® 705 Brochure

Polibrid® 705 Brochure

Proof of Performance (Bundamba Water Treatment Track Record)

Proof of Performance (Bundamba Water Treatment Track Record)

Proof of Performance - IP0367 Polibrid CH Report

Proof of Performance - IP0367 Polibrid CH Report