"street and park furniture"

Snapper Creek Car Park was developed as an environmentally friendly permeable car park. As such the Atlantis® Turf CellTM and Atlantis® Gravel CellTM systems were chosen, to provide gravel driveways and grass parking areas, thus preventing compaction of the soil and to protect the grass and to stabilize the gravel and provide a permeable car park.The parking areas were divided into car only parking and car & trailer parking.The area, consisting of natural sandy material, was excavated to a depth of 300mm, and a tensar grid was placed into the excavation and the excavated material placed back on top of the tensar grid and compacted.A layer of 100mm of gravel was then place on the areas where the Atlantis® Gravel CellTM modules were to be used and the Atlantis® Gravel cellTM modules positioned thereon and filled with gravel.The Atlantis® Turf CellTM modules were installed and filled with soil and then the area was grass seeded; no turf was used. The project was completed in mid 2014 and was at that stage semi grassed and in use.The project required 4,300sq. m of Atlantis® 52mm drainage cell, which are 480mm x 260mm x 52mm panels and have a rigid interlocking clipping system and are made from recycled polypropylene.In August 2017, the operators of the car park, which is still operating, were contacted and they stated that they were extremely happy with the condition of the car park, even though it has heavy traffic as there is a boat ramp there, and some areas have been flooded by Snapper Creek.The Atlantis® Turf CellTM & Atlantis® Gravel CellTM systems are specifically suited for car parks, access roads, aircraft taxiways and helicopter landing pads as it has the following features:a high load bearing of approximately 4000t/sq. M;protects the root system from compaction, while allow for vigorous horizontal and vertical root growth;permits surface water absorption and infiltration; andhave a long use life.

A common theme that has swarmed the United Kingdom is the renovation of office space. With a continuously growing workforce, cities across the country are transforming corporate workspaces into multi-level high-quality spaces. The demand for better-graded office space in the city of Glasgow is high. The magnificent development of 191 West George Street has created a vibrant buzz around the cultural city. Known as being within one of the most prominent positions within the City, 191 West George Street stands on the corner of West George Street and Wellington Street. The position encourages an easy commute for the workforce with transport links being a stone’s throw away from the development. Renovated with space and clarity in mind, the atrium stands out with its high-quality materials. The atrium was designed with a sleek set of Lifeline Speedlane Swings.

APPLICATION: 52mm Drainage Cell.PROJECT LOCATION: Silkstone Qld.PROJECT DETAILS: Parking Bays at the Silkstone Primary School.PROJECT COMPLETION: Sep 2013.Atlantis system saves big old tree.At Silkstone State school Qld. a contentious issue arose. The school required car parking and a sealed one at that. But, in the proposed car park was a huge old tree. The tree could be cut down and the roots dug out or the tree couldbe left, with open soil above the root system to allow for infiltration to keep the tree healthy; but this would lose atleast six car spaces. What was to be done?The answer turned out to be simple – keep the tree, but surround the tree with Atlantis® Gravel Cell™ 52mm cells.Hence while the rest of the car park was sealed, the areaaround the tree was prepared and the 52mm cells werelaid and clipped together there and filled with 10mmgravel. This area was of sufficient size to provide 3 carplaces on each side of the tree and a driveway in frontof the tree, while at the same time allowing rainfall toinfiltrate through the gravel into the root system.Thus we had a win-win situation. Not only was the treesaved, and money saved on not having to remove it, butthe root system of the tree was protected by the GravelCell™ system, and six extra car spaces were created.

Faced with an increasing number of students and staff cycling to campus everyday, Curtin University reached out to Cora Bike Rack for a solution to increase bike parking capacity within the limited parking areas available. Using the E3DT-GT fully dynamic double tier system, Cora was able to increase the number of secure AS2890.3 compliant bike parking spaces by 120%.

APPLICATION: 52mm Turf CellPROJECT LOCATION: North Ryde NSWPROJECT DETAILS: Macquarie University Permeable Overflow Car ParkPROJECT COMPLETION: March 2017Established in 1964, Macquarie University began as a bold experiment in higher education. Built to break from traditions: to be distinctive, progressive, and to be transformational. Today its pioneering history continues to be a source of inspiration as they celebrate their place among the best and brightest minds.When Macquarie University’s existing cark park became too small for the amount of cars now using it, it was decided to construct an overflow car park. However, not just any car park, but in keeping with their innovative thinking, an environmentally friendly permeable car park. Of course the Atlantis® Turf CellTM system was chosen, so that turf covered parking spaces could be provided.The project required 9,843sq. m of Atlantis® Turf CellTM system, which is constructed from 480mm x 260mm x 52mm panels and has a rigid interlocking clipping system and is made from high quality recycled polypropylene. The project was undertaken by J & G Excavations and Asphalting (NSW) Pty Ltd.The Turf CellTM cells were laid on a bed of permeable soil, and filled with sandy soil and turf was then placed on top of the linked Atlantis® Turf CellTM cells and rolled with a heavy roller to press the roots into the soil in the cells, where they were protected from compaction and could grow freely both horizontally and vertically.The Turf CellTM system is another Atlantis invention, and is specifically suited for car parks, access roads, aircraft taxiways and helicopter landing pads as it has the following features:a high load bearing of approximately 4000t/sq. M;protects the root system of grass from compaction, while allow for vigorous horizontal and vertical root growth;permits surface water absorption and infiltration;has a long use life; andaesthetically, the system allows the grass to fill in completely, creating a lush lawn with an invisible reinforcement structure.

To tackle the car park issues, the CS Zip Block (ZB Series) expansion joint cover was selected as part of the solution.

Faced with an increasing number of students and staff cycling to campus everyday, FDC Construction was tasked with finding a solution to increase bike parking capacity within the limited parking areas available at Macquarie University latest building project. Using Cora Bike Rack’s fully dynamic E3DT-GT double-tier system, FDC was able to increase the number of secure AS2890.3-compliant bike parking spaces by 120%.

Fairview’s Vitracore G2 was used in the development of Sydney's King Street Warf Ibis Hotel in order to provide optimum resistance to weather and industrial pollutants, whilst aiding in the presentation of an innovative dining and entertainment precinct.

45 Clarence St, is a striking office tower located in the busy western corridor of Sydney’s commercial district, with extensive views of Darling Harbour and Barangaroo, it is a prestigious building with various companies operating inside this office building, such as Business Sydney and CBRE.As part of the refurbishment, which included the lobby upgrade, CS worked extensively with the property management team, architect, builder, and installer to deliver the architectural grilles for this project. There was a unique vision to use the Econoline indoors in a commercial building instead of using it as an outdoor vision barrier grille. The focus of this refurbishment was to provide a bespoke architectural grille to line the ceiling and vertical walls of the lobby and modernise the building.The Econoline is typically used in locations such as parking garages, concealing mechanical equipment and for many refacing applications. Having the Econoline installed in a commercial building is a unique opportunity that will result in more products being used for aesthetic purposes. The challenge that was faced with the Econoline being used indoors was that the tapered vertical walls on two sides as grilles needed to be a certain distance above ground level and to be structurally sound.On completion, the lobby at 45 Clarence St Sydney is unique from your typical office building. This is also exciting for CS, to be part of a project that has been transformative and elegant in design.

The King George Park features the following RBA products:RBA8847-156 – Stainless Steel Toilet | Ambulant SuiteRBA4150-101 – Accessible Compliant Backrest | StandardRBA4040-300 – 40° LH + 300 Straight | Grab Rail SetKB200-01 – Koala Kare Baby Change Table Horizontal | GreyB2890 – Jumbo Toilet Roll HolderRBA8847-428 – Stainless Steel Toilet | Accessible SuiteRBA4090-450 – 90° Grab Rail, Ambidextrous | AmbulantRBA8889-186 – Curvalinear™ BasinB295x14 – Accessible Compliant Stainless Steel ShelfB715E – Bobrick Elan Hand Dryer | StainlessB165-1824 – Glass Mirror with Stainless Frame | BudgetRBA8864-100 – Basin | Wall MountedRBA1083-607 – Water Saving Tap | Satin Stainless 5.0L/m

54 Mary Street is an office building nestled in the heart of Brisbane. Spanning over 22 levels, it was no small feat for bureau^proberts to carry out a retrofit of the public washrooms. As part of the refurbishment of male, female, and ADA Accessible washrooms across numerous floors, bureau^proberts had to source a large selection of soap dispensers that would be readily available in large quantities – and ideally, in a particular matte black finish. ASI JD Macdonald were perfectly positioned to provide the solution.

When deciding on bicycle parking solutions for the Ovo project, Cora Bike Rack presented its range of innovative product designs that could tailored for this special project. In order to provide maximum capacity and accessibility, Cora’s E3DT-GT double tier system, E3VR vertical wall mount system and CBR bike parking rails were combined to offer the ultimate AS2890.3 compliant EOT facility.

The City of Boston is known for many things – from Fenway Park to the Boston Marathon to the bar from Cheers, the city is full of iconic landmarks, events, cultural assets, education centers, and more. The City is also recognised for its vast history, especially downtown, where hundred-year-old buildings have been preserved or restored. There is also a mixture of new property development, including 33 Congress Street, in the heart of the financial district, which combines the best of historical design with new construction. 33 Congress incorporates more than 400,000 square feet of office and retail space, transforming the historic neighborhood and positioning the area as a dynamic downtown destination. The project was designed by Arrowstreet, an award-winning architecture and design firm, and was led by Jason King, AIA, LEED, AP, BD+C, Senior Associate for Arrowstreet. Blending Historical Features with a Modern Design According to King, the 33 Congress Street building consisted of three different structures that were built at separate times: in 1904, 1906, and in 1922 and then all combined into one space. While the space functioned as one building, there were three separate elevator cores, sets of restrooms, sets of stairs, and more. Those entities needed to be reconfigured into one. The most striking feature of 33 Congress is a new, modern glass and steel structure, containing 6 additional floors of office space that sits on top of the original three masonry buildings. Another important project goal was to upgrade the main lobby to a modern design that allowed public access, increased security for building employees, and respected several historical aspects. “We needed a way to get people into the new, main elevator lobby quickly due to the high volume of traffic that we were anticipating would take place after the redesign,” King said. “We also wanted to create an entrance that would create a better flow of entry from the sidewalk into the building.” The original building had an existing revolving door, but it was small and surrounded by stone. “It was dark and uninviting,” King said. “We were creating an open and airy Class A lobby space and wanted visitors to clearly see the ornate, coffered ceiling and experience the grand and historic nature of the lobby as they entered.” Revolving Door and Speed Gates Provide Aesthetics and Function King implemented a Boon Edam Crystal Tourniket manual revolving door to lead visitors in the double height lobby space. The Crystal Tournket is constructed virtually completely from glass with only a few stainless steel accents to ensure the solidity of the revolving door. It fits seamlessly with modern glass facades but can also be a beautiful eye catcher in more traditional or classic designs. For employee access, the building’s previous design did not incorporate turnstiles to the elevator banks. “The building did have card reader access, but only at certain doors and locations,” King said. King installed four lanes of Boon Edam Lifeline Speedlane Swing speed gates and two Winglock Swing model access gates to provide secure employee access to the building’s upper floors. The Lifeline Speedlane Swing speed gate manages and channels the flow of people entering and moving around buildings. It employs sensors that detect visitors approaching, with pulsing light strips to guide the user. A sleep function saves on energy use. It can be customised with dimensional and glass choices, including corporate identity colors or other options, so that it either blends-in or stands-out from its surroundings. The Boon Edam Winglock Swing is constructed from stainless steel and a single glass panel, and is unobtrusive in nature and design. The access gate easily manages bi-directional traffic, with LED lights that signal if the gate is in use or on standby. The access gate ties into a manned security desk located near the front doors. Employees gain access to the building through either the Lifeline turnstiles, or a Winglock Swing access gate, while building visitors can receive credentials at the security desk. King said, “We started the process looking at Boon Edam from a security and an aesthetic standpoint. We went through multiple product options but always had a Boon Edam product as the basis of the design. We have been happy with Boon Edam entrance solutions and we are planning to use them again for future projects.”

For a busy place like The Star casino complex in Sydney, it’s important for visitors and employees alike to be able to come and go from the car park without any hassles. But after a significant amount of wear and tear, The Star’s existing metal expansion joint covers were leaking between floors. Not only that, they were a trip hazard too as the fixings began to dislodge.

ABN Group chose a site in Leederville, WA, for a new state-of-the-art headquarters building. This included a multi-level office, ground floor commercial tenancies, end-of trip facilities, and parking for approximately 160 cars.The project demanded high standards for quality, had a construction time frame of 87 weeks, and was to be five-star Green Star rated.These considerations had an impact on the selection of finish for the car park floors, which is where MARKHAM became involved in the project.AQURON 1000 was selected for enhanced concrete curing, permanent sealing, and deep anti-dust hardening.

Birmingham New Street Station was originally re-built in 1967 to accommodate 650 trains carrying 60,000 passengers per day. By 2010 it had become the busiest station outside of London, operating at more than twice its intended capacity. The first half of the refurbishment was completed in 2013. The station’s recently updated configuration should now accommodate a yearly 8.3% rise in passenger numbers. SAS International commenced work on the three-phase project in June 2012. NG Bailey and main contractor Mace installed SAS systems across the platforms, the shopping centre and the concourse. Full scale, physical mock-ups of the bespoke ceiling solutions were built on-site to ensure design intent prior to installation. The integration of fans for smoke extraction and complex wind loads had to be considered to guarantee passenger safety. The wind loads were a concern as trains passing platforms at speed can cause considerable negative loads. Bespoke ceilings comprising fixed angle bulkheads were installed in line with the curving platforms. The typically trapezoidal bulkheads were bolted end to end in order to form a faceted layout to follow these curves. Using shared data from the project’s BIM model, SAS International used a point cloud to measure the platforms and 3D model the panels. The model’s geometry revealed that the platforms were all non-uniform. This posed a significant design challenge. The data required careful analysis in order to achieve a smooth curved line within the platform edge. This was essential to provide train drivers with an unobstructed view coming into and out of the station. The SAS International design team was able to rationalise the number of unique panel types down to four. This overcame the driver visibility issue, ensured uncompromised aesthetics and brought costs within budget. Electronic Total Station setting-out techniques were then used to set out the panels along the curve.

GWA Bathroom & Kitchens worked collaboratively with Architectus and Grocon to supply a full schedule of fittings, including reduced flow tapware and water saving toilet suites. This installation, together with the building’s innovative recycling technology, is saving approximately 100,000 litres of water per day, helping 1 Bligh meet its 6 Green Star rating - the highest Green Star rating for a commercial development across NSW.

In the bathrooms, water-saving technologies were installed, including the 4-Star WELS rated Caroma Cube Wall-Faced Invisi Series II Toilet Suite, with its innovative Smartflush® technology and concealed cistern. The Caroma Cube Extension Wall Basin is matched with the WELS 5-star rated Caroma Liano Basin Mixer and completed with the Caroma Liano range of accessories.

COLLABORATIONArchitects: Johnson Pilton Walker (JPW) and the Government Architect’s Office.Builder: Built.BRIEFThe project required a coating that would preserve and protect the feature precast concrete ceiling, beams, walls, and eyelet as part of the Anzac Memorial Centenary Project.MATERIAL & APPLICATIONECOCLEAN Porosity SealerECOCLEAN Self-Cleaning CoatingOUTCOMEA stunningly sustainable multi-award-winning project that includes the prestigious Sulman Medal. Our team is so proud to have played a part in the preservation of one of Sydney’s most iconic monuments, a symbol of our history and our future.

This functional home embraces the sub-tropical seaside environment to offer a diverse range of open plan living and relaxation spaces for this NSW family.

Located marina-side in one of Auckland’s most exciting new precincts. It also straddles Aucklands CBD making it Aucklands premier destination. Rondo provided the full interior package, including walls and ceilings for the residential gym, business centre and boutique theatre.

The Rondo team were engaged in the project to design the ceiling framework for the lobby of the twenty-five-storey building. The Rondo KEY-LOCK suspended ceiling system with radius top cross rail was specified to create the proposed arch ceiling, along with Steel Stud and Track for the walls in other areas of the project.

Due to tight plenum space and extremely congested plenum areas, Rondo’s new Xpress Drywall Grid System was the ideal ceiling system to use. This maximised the ceiling heights in all guest rooms while offering compliant plenum vertical clearances. Contractors implemented Rondo’s intricate feature ceilings and bulkheads throughout the entire building, such areas included the lobby, restaurants and conference areas.

Rondo worked with Forman Commercial Interiors and Alpha Holdings on the three storey, $40 million project by providing all of the Steel Stud and Track requirements along with the KEY-LOCK Concealed Suspended Ceiling System. Due to the various wall systems designed, Rondo supplied diagrammatic specifications for the junction details to assist in completing the project, which finished in August this year.

Expoconti and Rondo, along with the project architects, Lysons Architects and builder, Brookfield Multiplex, combined their expertise to ensure the design and construction of the RMIT Swanston Academic Building (SAB) offers a higher quality and innovative learning experience for students. To achieve this, the newly launched Rondo MAXIframe External Wall Framing System was specified, with Rondo MAXIjamb designed for installation around door jambs and internal window openings. This meant Expoconti could save time on site as MAXIjamb replaces the necessity for multiple stud configurations, as well as offering greater performance capacities than traditional wall stud framing.

When the John Holland group needed assistance with designing an End of Trip Facility (EOT) for the new Perth Children’s Hospital project, they turned to Cora Bike Rack for advice. With several challenging spatial elements and the requirement to provide AS2890.3 compliant bike racks and layout, Cora assisted in the bike rack selection which included both horizontal and vertical racks. The most efficient use of space in this project was achieved by including E3VR vertical racks mounted to E3VR-P double sided mounting posts.

Designed by Smart Design Studio, the building is an honest layering of old and new as expressed by the raw treatment of the exterior façade through to the smooth, modern interior. The rooftop addition connects the double-height banks of glass Breezway Louvres with an articulated aluminium roof folding down as a screen to the back of the building. The end result successfully incorporates flexible and functional office interiors and a two-bedroom rooftop apartment within a rigorously controlled contemporary architecture of old and new.

Rondo provided Red Oak Contracts Pty Ltd with the external wall, soffit and bulkhead designs which were submitted to BADGE and Hames Sharley Architects for approval. Rondo’s technical team highlight the quality of workmanship on this project, especially when comparing the designs to the finished installation. The stock was supplied on time and accurate with Rondo working with all parties throughout this project which is a credit to all involved.

Reading is a vibrant city that boasts home to some of the largest company UK headquarters such as Microsoft and Pepsico calling this Berkshire county home to their UK head offices. Now, looking to transform the way they work, the retail HQ based in Reading upgraded its large office space to start a new era of work life for its current and future employees. This large refurbishment will see all floors of their existing building being completely reconfigured and re-designed that sees a new cafe/bar and staff gym/studio along with a studio mock shop space and office expansion. Within this project, the interior and exterior were dramatically changed and enhanced utilising fresh entry and security solutions. Contact us to see what we can do for your building. Originally and still currently known in Ireland as Penny’s, these UK headquarters resides in the centre of vibrant Reading. Launching its first clothing store back in 1969, the affordable yet innovative fashion retailer offers shoppers a unique shopping experience with its staple large stores, airy layouts and competitive item pricing. Calling it a ‘workplace of the future’ the new UK HQ spans over 130,000sq ft of redesigned space that homes 580+ employees. The challenge in this project was to unobtrusively implement secured entry solutions that could be stylish in appearance but also provide high-quality functionality. Social Open Space with State-of-the-Art Security With the overall theme being togetherness, collaboration and open workspace, there was a requirement for the building to be secured yet keep the spacious feeling. The challenge in this project was to unobtrusively implement secured entry solutions that could be stylish in appearance but also provide high-quality functionality. The entry solution was to implement a bespoke revolving door, combining a Crystal Tourniket and a framed Tourniket. This customised door benefits from a hidden fully automatic drive in the ceiling that also provides LED down lighting for better user visibility. For security, a bank of tall glass Lifeline Speedlane Swings with a wide-lane setup was specified. Contact us to see what we can do for your building.

The Steamrail Adventure Playground at Millars Landing is part of a large residential development in North Baldivis, WA. Created with growing families in mind, the development includes numerous playgrounds, parks and family areas all based around the theme of steam trains, water towers and timber milling. The outdoor play equipment boasts two flying foxes, a 12-metre slide, swing sets, a climb-on steam train structure, picnic facilities, kickabout turf areas, robust timber furniture and railway sleepers. adventure+ took the idea of the landscape architect, which was a simple sketch, and turned it into a practical result. Her idea provided the foundation of the playground design, and the adventure+ team were able to reflect this idea in a way that was economical, standards compliant and required minimal design and installation time. The client’s greatest challenge was finding a company that could accurately make the structure, something adventure+ was able to do.

The Roads & Maritime Services (RMS) now benefit from a highly progressive workspace in their newly refurbished head office on Parramatta Street. The main aim of the refurbishment project was to improve facilities and collaborative spaces for staff and visitors. However, a significant challenge for the contractors was to keep all existing communications rooms fully operational throughout the project. Achieving the Aim: SAS800 Trucell ceilings were installed in the open plan lounges and stairwells of the renovation. Creating a grid of squares, strong lines stretch the length and breadth of the collaborative space. The system gives a decorative feature to the fit-out with the illusion of a much larger space for activity-based working. Comfortable lounge furniture and bright colours have also been chosen to encourage communication and create a flexible working space. Meeting the Challenge: Specified with a lay-in exposed grid, each tile slots in place without the need for gaskets or cutting. With the building in constant use, installation was quick and easy keeping the project on schedule with minimal disruption. Popular in Australian CBD property markets, the refit considers occupant well-being with Grade A ‘end of trip’ facilities. An upgraded lobby area also contributes to the value-added space with an improved experience for employees and visitors alike.

The first stage of a two hectare urban regeneration development in Docklands opened in 2018 and introduced the city of Melbourne’s first elevated public park. Floating 10 metres above open public space, a spectacular Tongue & Groove Cladding Soffit overhangs 90 metres, providing natural warmth and texture and remaining consistent with the design of the project. Installed by our partner installer Casello, the project is an example of how our expert installers can complete a project on time and on budget. Green space in the CBD Biophilic design principles were a key to the design of One Melbourne Quarter, bringing the warmth and beauty of natural materials to the workplace. The most prominent inclusion is the spectacular Skypark, located directly above the entrance of the building, on the second floor. The Skypark is a perfect ‘suspended oasis’, bringing the uniquely relaxing aspects of a local park to the inner city. A statement through a soffit With the Skypark suspended above street level, the underside presented a perfect opportunity for the architects Denton Corker Marshall to create a unique feature which was consistent with the design ambitions of the project. Behind the look Sculptform Tongue & Groove Cladding provided a beautiful natural aesthetic in spotted gum. The combination of visual features and colour variation contrasts the greys of the Melbourne CBD and contributes to the overall identity of the project. PEFC certified timber was required to meet Green Star Rating, which was then sourced by Sculptform.

Coined as the newest urban development in North Perth, this boutique 5-storey apartment, Rose on Angove designed by Architects Bollig Design is a little gem.Situated on the corner of Angove and Fitzgerald Streets in the prominent and renowned coffee and café strip of Angove Street, the $15 million development consists of 39 one and two-bedroom apartments.

It’s hard to imagine a timber better suited to a palette of concrete and pale pink terrazzo than GoodWood Victorian ash. This winning combination is found throughout the space, drawing on clean lines and simplistic furniture to complete the brief. “The main reason we used Victorian ash is because it is a light coloured Australian timber that met the BAL-19 bushfire attack level requirement for the site. Its softness and warmth works beautifully with the project palette” - Atelier Chen Hung.

The City of Adelaide owned and operated UPark Gawler Place provides locals and visitors with easily accessible parking in the center of Adelaide. Open 7 days a week, the undercover parking facility required an urgent trafficable waterproof deck coatingsolution.Flowcrete Australia was consulted on how the operators could prevent water leakage into the tenancies located below, whilst ensuring the structural integrity of the parking facility was maintained. An added challenge was that the facility needed to remain operational throughout the installation.Deckshield ED Rapide was the ideal solution for the unique challenges at UPark Gawler Place. The hybrid PUMMA system features the Deckshield PDS Membrane which is certified by CSIRO to AS 4654.1.2012 - the system was designed to prevent the water leakage faced by the car park operators.Over 5,500m² of Deckshield ED Rapide was applied throughout the facility. The installation took approximately 2 months to complete, as the applicators were required to approach the project section by section, whilst liaising with traffic management to ensure parking operations were minimally disrupted and the facility remained open to patrons.

Located in Brisbane’s multifaceted suburb of Newstead, the new 14 Stratton Street development sets new standards for office design in the area, while embodying the pioneering spirit, focus on wellness, and importance of culture the district is renowned for.