"space heating"

Sitting proudly at the junction of the M4 and M7 motorways in Sydney's Greater West is Calibre Eastern Creek Building 3. An architecturally designed warehouse and two-storey office space which incorporates 990 m2 of Vitradual on the attractive facade of the development. Builder: Vaughan Constructions, Architect: SBA Architects.

London is a vibrant, busy and beautiful city, boasting constant innovation and unique architecture. Now, developments have become bigger and more competitive year on year. With expectations on office workspaces becoming increasingly more open and flexible, the requirement for integratable security has become a complex task. This led to the existing building of 10 Queen Street Place, Riverscape to have a much-needed refurbishment following the trend of open atriums, flexible floor space and usable rooftop space. Within this project, the interior and exterior were dramatically changed and enhanced utilising fresh entry and access control security solutions. Located next to Southwark Bridge and a couple minutes’ walk from the bustling area of Cannon Street Station is Riverscape. Originally opened back in 1980, the multi-storey office space was a modern development that sat on the sought-after area of the River Thames. This project was refurbed from top to bottom, with the original Boon Edam entrance solutions being upgraded to newer more innovative products. The lead architect was Aukett Swanke with interior designers Barr Gazetas leading the design of the refurbishment and, main contractors being Overbury. Working for this project years prior in relation to the old security lanes and revolving doors that were installed by Boon Edam, the London Sales team knew the building and requirements needed. It’s common to see dated installations be retrofitted with newer security products that modernise the look and feel of an entrance as well as upgrade the technology associated with them. Download the Case Study for more information about the project.

SAS International's bespoke waveform acoustic baffle ceiling solution was used as a feature in the new Skype Headquarters. An SAS International bespoke waveform acoustic baffle ceiling solution incorporating luminaires by Zumtobel, was specified by Walker and Martin Architects (WAM) for the new Skype Headquarters. Situated in Luxembourg, the new building forms part of the regeneration works to an existing brewery located in Clausen, the old quarter of Luxembourg City. The challenge set by the client was to provide an interior that would inspire innovation in the daily workplace of Skype employees whilst retaining an element of corporate sophistication. The solution helped create a dynamic and flexible office space. In the design, development and installation of the system, WAM worked closely with SAS International, to ensure the baffles integrated seamlessly with the luminaires to suit the ceiling and building shape. WAM designed the acoustic baffle ceiling solution with technical help from SAS International, then developed the layout to achieve the ‘wave’ and ‘fluid’ affect. Stuart Walker adds, “The ceiling design gives an uplifting ambience to the space, people ‘look up’ when they enter and immediately know they are in a space that challenges office convention with innovative thinking.” Another consideration that WAM took when selecting materials for the fit out process was the impact on the environment. SAS International metal ceilings have a lifespan in excess of 25 years with only very basic maintenance. These products withhold a residual value and can be recycled at end of life into new virgin steel or aluminium without any loss of properties; this ensures products do not end up in costly and unsustainable landfill sites.

SAS International designed and manufactured a range of solutions for the new 75,000 square metres Terminal 2 at Dublin Airport, Ireland. According to Dublin Airport the new second terminal will be capable of comfortably handling up to 15 million passengers per year. Specification demanded that durability, ease of maintenance and acoustics were considered. SAS International worked with architects Pascall + Watson to design the ceiling solution answering the architect’s brief to factor in ongoing maintenance conducted by Facilities Management teams in the future. The design of these large sized ceiling panels required careful consideration at design stage to ensure they would be manageable when working at a height. Designed and developed specifically for Dublin Airport was 35,000 square metres of ceiling systems, installed in the main departure area, walkways and baggage handling areas. This solution looks like any other suspended metal ceiling system as it provides an aesthetically pleasing flush finish. But where this product differs is its ingenious way of allowing access to the ceiling void and services for ongoing essential maintenance. This is of particular benefit in high traffic areas such as Dublin airport as it enables a corridor to remain in use rather than having to close off the entire route. SAS International manufactured the 20,000m2 of large aluminium frames for the fabric ceilings which creates a striking central feature. Working closely with SAS International were local installers Platt and Reilly who applied the stretched fabric to the frames on-site and hoisted them into position. Creating a comfortable environment for traveller and worker was helped with the use of acoustic floating rafts and perforated metal ceiling solutions (with integrated acoustic pads) to provide the necessary acoustic control for this project. Lighting was suspended neatly between the rafts to also provide a modern finish to the corridors. In addition Perimeter heating and air handling grilles also enhance the experience.

Acrovyn by Design from Construction Specialties, was chosen for the Royal Melbourne Hospital in Victoria. The overall objective of the main entrance redevelopment was to transform a dark, chaotic space with low ceilings and multiple reception points into a light and welcoming entry; facilitating the daily movements of patients, visitors, volunteers and staff efficiently by providing clear way-finding.

Faced with an increasing number of students and staff cycling to campus everyday, Curtin University reached out to Cora Bike Rack for a solution to increase bike parking capacity within the limited parking areas available. Using the E3DT-GT fully dynamic double tier system, Cora was able to increase the number of secure AS2890.3 compliant bike parking spaces by 120%.

The 5-star Hyatt Regency Sydney on the fringe of Darling Habour, formerly Four Points by Sheraton, underwent a vast redevelopment which included refurbishment of the hotel and construction of a new convention space and 25 level tower. Adorning the recognisable covered facade is Equitone Tectiva, a through-coloured fibre cement cladding, which was installed by Stane Industries. Architect: Cox Architecture

The University of Technology Sydney (UTS) is located in the heart of Sydney. In February 2015 the Faculty of Science and Graduate School of Health Building opened its door to its first cohort of students. Built as a 5 Star Green Star building, it provides a range of spaces for collaborative learning and research. SAS150 was specified across the new state of the art research labs and SAS205 for the corridors of the University.

new beach house on Sydney's Northern Beaches her brief was to create a home that embraced the surrounding vernacular of casual, barefoot living and allowed access to a breezy beach focussed lifestyle.Built as a young family’s holiday retreat, the homes coastal design is based around a series of stacked pavilions which invite you to move through the space as you feel the volumes expand and contract. 

Due to tight plenum space and extremely congested plenum areas, Rondo’s new Xpress Drywall Grid System was the ideal ceiling system to use. This maximised the ceiling heights in all guest rooms while offering compliant plenum vertical clearances. Contractors implemented Rondo’s intricate feature ceilings and bulkheads throughout the entire building, such areas included the lobby, restaurants and conference areas.

Designed by SAOTA in association with TKD Architects, Double Bay House overlooks Sydney’s world famous harbour and uses both Click-on Battens and Tongue & Groove Cladding to create amazing timber features. The incredible batten ceiling spanning the internal to external spaces, creates a seamless series of intersecting planes. Tongue & Groove Cladding is used to create linear textures with a natural look throughout.

Faced with an increasing number of students and staff cycling to campus everyday, FDC Construction was tasked with finding a solution to increase bike parking capacity within the limited parking areas available at Macquarie University latest building project. Using Cora Bike Rack’s fully dynamic E3DT-GT double-tier system, FDC was able to increase the number of secure AS2890.3-compliant bike parking spaces by 120%.

When the owners of this bungalow, built around a hundred years ago, approached Ian Moore Architects they were looking for a larger living space as well as better bedrooms for their children. Ian's approach was spread across three main areas: refresh the old, remove the existing extension and park a new rectangular, two storey box. The outcome showcases two distinct external elements which have a seamless internal connection with no separation.

Ocean Keys is a major shopping destination in Clarkson, one of Perth’s new fast growing suburbs. This $100 million expansion completed in October 2014 included the addition of retail and fresh food stores and new residential apartments. The shopping complex is now 65% larger with a total floor space of 35,000m². Rondo supplied Key- Lock Concealed Ceiling System and steel framing for the extensive plasterboard soffits and bulkheads on the project.

This stunning architectural build is the new Australian Headquarters for PROBOND. Three shades of PROCORE A1® create this show-stopping commercial facade: Midnight Metallic and Custom Pearl Grey Metallic accentuate the office space popout. Sabre Silver Metallic is used in the window surrounds and the side wings which disguise the distribution complex and feature a multi-faceted 3D triangle pattern. The lightshow throughout the day is stunning as the sun moves across the complex.

The University of Melbourne’s (UoM) Biosciences building is the perfect example of how to match a consistent timber throughout an entire space. And not just any timber. Australian Oak Engineered Flooring, cleverly partnered with GoodWood Victorian ash and IronAsh. To coincide with one of HASSELL’s philosophies to ‘continuously improve environmental performance and energy efficiencies as well as create healthier working environments’, the UoM building demonstrates an accurate representation of sustainable design and the connection of nature to increase productivity.

Sculpform Design Studio in central Melbourne is designed by Woods Bagot and utilises Curved Timber Battens to create a stunning studio space for us to work collaboratively with the clients. Working with Australia’s leading architects and builders is Sculpform's strength, and the vision behind the studio was an environment to foster and enhance that collaboration process. Far from a typical showroom, the studio centres around the Co-lab workshop, where clients can interact and understand the practicalities of the products.

The City of Boston is known for many things – from Fenway Park to the Boston Marathon to the bar from Cheers, the city is full of iconic landmarks, events, cultural assets, education centers, and more. The City is also recognised for its vast history, especially downtown, where hundred-year-old buildings have been preserved or restored. There is also a mixture of new property development, including 33 Congress Street, in the heart of the financial district, which combines the best of historical design with new construction. 33 Congress incorporates more than 400,000 square feet of office and retail space, transforming the historic neighborhood and positioning the area as a dynamic downtown destination. The project was designed by Arrowstreet, an award-winning architecture and design firm, and was led by Jason King, AIA, LEED, AP, BD+C, Senior Associate for Arrowstreet. Blending Historical Features with a Modern Design According to King, the 33 Congress Street building consisted of three different structures that were built at separate times: in 1904, 1906, and in 1922 and then all combined into one space. While the space functioned as one building, there were three separate elevator cores, sets of restrooms, sets of stairs, and more. Those entities needed to be reconfigured into one. The most striking feature of 33 Congress is a new, modern glass and steel structure, containing 6 additional floors of office space that sits on top of the original three masonry buildings. Another important project goal was to upgrade the main lobby to a modern design that allowed public access, increased security for building employees, and respected several historical aspects. “We needed a way to get people into the new, main elevator lobby quickly due to the high volume of traffic that we were anticipating would take place after the redesign,” King said. “We also wanted to create an entrance that would create a better flow of entry from the sidewalk into the building.” The original building had an existing revolving door, but it was small and surrounded by stone. “It was dark and uninviting,” King said. “We were creating an open and airy Class A lobby space and wanted visitors to clearly see the ornate, coffered ceiling and experience the grand and historic nature of the lobby as they entered.” Revolving Door and Speed Gates Provide Aesthetics and Function King implemented a Boon Edam Crystal Tourniket manual revolving door to lead visitors in the double height lobby space. The Crystal Tournket is constructed virtually completely from glass with only a few stainless steel accents to ensure the solidity of the revolving door. It fits seamlessly with modern glass facades but can also be a beautiful eye catcher in more traditional or classic designs. For employee access, the building’s previous design did not incorporate turnstiles to the elevator banks. “The building did have card reader access, but only at certain doors and locations,” King said. King installed four lanes of Boon Edam Lifeline Speedlane Swing speed gates and two Winglock Swing model access gates to provide secure employee access to the building’s upper floors. The Lifeline Speedlane Swing speed gate manages and channels the flow of people entering and moving around buildings. It employs sensors that detect visitors approaching, with pulsing light strips to guide the user. A sleep function saves on energy use. It can be customised with dimensional and glass choices, including corporate identity colors or other options, so that it either blends-in or stands-out from its surroundings. The Boon Edam Winglock Swing is constructed from stainless steel and a single glass panel, and is unobtrusive in nature and design. The access gate easily manages bi-directional traffic, with LED lights that signal if the gate is in use or on standby. The access gate ties into a manned security desk located near the front doors. Employees gain access to the building through either the Lifeline turnstiles, or a Winglock Swing access gate, while building visitors can receive credentials at the security desk. King said, “We started the process looking at Boon Edam from a security and an aesthetic standpoint. We went through multiple product options but always had a Boon Edam product as the basis of the design. We have been happy with Boon Edam entrance solutions and we are planning to use them again for future projects.”

Construction has concluded on the redevelopment of the ‘old Harris Scarfe’ site at Rundle Mall in Adelaide. The renovations seek to re-energise the area but remain committed to preserve Adelaide’s most cherished department store. Four floors of retail space have had the base built by Interior Projects who have been a valued Rondo customer since 1988. Rondo provided essential technical expertise and design solutions for the fire walls and security mesh between tenancies.

It’s hard to imagine a timber better suited to a palette of concrete and pale pink terrazzo than GoodWood Victorian ash. This winning combination is found throughout the space, drawing on clean lines and simplistic furniture to complete the brief. “The main reason we used Victorian ash is because it is a light coloured Australian timber that met the BAL-19 bushfire attack level requirement for the site. Its softness and warmth works beautifully with the project palette” - Atelier Chen Hung.

Collaboration Architect: Rossi ArchitectsBuilder: M+J BuildersMaterial & ApplicationOur ECOTONE Matt and ECOTONE Sharp were applied onsite to the compressed fibre cement (CFC) soffit cladding to bring about a natural timber look aestheticOutcomeWe love our Gol Duhn with black shadow line edge finish on these soffits. It has been a pleasure to collaborate on this community hall to deliver a truly stunning space for local gatherings.

Memocorp is one of the largest private property groups in Australia. They manage the M Collective – a premium investment grade portfolio spanning commercial, retail and residential properties. Committed to delivering the best spaces and experience for their clients they use workplace design ideologies that harmonise and fascinate. Installing Dyson Supersonic hair dryers and Dyson Airblade V hand dryers, Memocorp found products that not only suited the sleek aesthetic of the luxurious design but also delivered high performance and usability.

Designed by Silver Thomas Hanley (STH) Architects, the structural additions provide four extra levels of useable space above the existing emergency department. As a construction-managed project, the design and construction teams were able to work in concert to ensure all specifications were correct and appropriate at every stage of the work. Having considered the project challenges, including site constraints, access and speed in which the project needed to be completed, CW175 was chosen for its flexibility, engineering and structural integrity.

Renowned Melbourne architecture firm Denton Corker Marshall was responsible for designing the bridge’s striking appearance. ‘The design respects the site’s cultural heritage and environmental values, providing the physical and mental space to pause and reflect,’ says Neil Bourne, Director at Denton Corker Marshall. The elegantly twisting bridge connects both sides of Hobart’s broad entrance highway in a distinctive entry portal. This much-anticipated civic project’s major design feature is 180 metres of Capral aluminium sheeting, skirting the bridge.

Rondo supported Maxcon Pty Ltd through contractor L&Y Commercial for this project incorporating two 26 and 36 story residential towers of 551 apartments, an Art Series Hotel with 90 rooms, retail spaces and serviced offices. Due to the large-scale nature of the build, our customer was very satisfied with Rondo’s ability to provide quick turnaround times for crane lifts as well as our efficient and effective operation of installation and delivery of goods on site, on time.

When the John Holland group needed assistance with designing an End of Trip Facility (EOT) for the new Perth Children’s Hospital project, they turned to Cora Bike Rack for advice. With several challenging spatial elements and the requirement to provide AS2890.3 compliant bike racks and layout, Cora assisted in the bike rack selection which included both horizontal and vertical racks. The most efficient use of space in this project was achieved by including E3VR vertical racks mounted to E3VR-P double sided mounting posts.

Forget predictable ‘Hamptons’ beach design, and instead think laid-back beach location with a slight mid-century feel. To compliment the Goodwood Victorian ash, IronAsh cladding and Australian Oak Engineered Flooring were specified to create a continuous flow of design from inside to out. Matching the timber throughout a space creates a harmonious atmosphere that connects each room cohesively. Specifying timber all from the one manufacturer like ASH means you are getting consistent grain and quality products throughout the entire build.

APPLICATION: 52mm Drainage Cell.PROJECT LOCATION: Silkstone Qld.PROJECT DETAILS: Parking Bays at the Silkstone Primary School.PROJECT COMPLETION: Sep 2013.Atlantis system saves big old tree.At Silkstone State school Qld. a contentious issue arose. The school required car parking and a sealed one at that. But, in the proposed car park was a huge old tree. The tree could be cut down and the roots dug out or the tree couldbe left, with open soil above the root system to allow for infiltration to keep the tree healthy; but this would lose atleast six car spaces. What was to be done?The answer turned out to be simple – keep the tree, but surround the tree with Atlantis® Gravel Cell™ 52mm cells.Hence while the rest of the car park was sealed, the areaaround the tree was prepared and the 52mm cells werelaid and clipped together there and filled with 10mmgravel. This area was of sufficient size to provide 3 carplaces on each side of the tree and a driveway in frontof the tree, while at the same time allowing rainfall toinfiltrate through the gravel into the root system.Thus we had a win-win situation. Not only was the treesaved, and money saved on not having to remove it, butthe root system of the tree was protected by the GravelCell™ system, and six extra car spaces were created.

The first stage of a two hectare urban regeneration development in Docklands opened in 2018 and introduced the city of Melbourne’s first elevated public park. Floating 10 metres above open public space, a spectacular Tongue & Groove Cladding Soffit overhangs 90 metres, providing natural warmth and texture and remaining consistent with the design of the project. Installed by our partner installer Casello, the project is an example of how our expert installers can complete a project on time and on budget. Green space in the CBD Biophilic design principles were a key to the design of One Melbourne Quarter, bringing the warmth and beauty of natural materials to the workplace. The most prominent inclusion is the spectacular Skypark, located directly above the entrance of the building, on the second floor. The Skypark is a perfect ‘suspended oasis’, bringing the uniquely relaxing aspects of a local park to the inner city. A statement through a soffit With the Skypark suspended above street level, the underside presented a perfect opportunity for the architects Denton Corker Marshall to create a unique feature which was consistent with the design ambitions of the project. Behind the look Sculptform Tongue & Groove Cladding provided a beautiful natural aesthetic in spotted gum. The combination of visual features and colour variation contrasts the greys of the Melbourne CBD and contributes to the overall identity of the project. PEFC certified timber was required to meet Green Star Rating, which was then sourced by Sculptform.

7000m² of SAS310 helped Qantas Airways overcome acoustic challenges, controling reverberation time and meeting a very high acoustic performance target. Qantas Airways Limited, nicknamed ‘The Flying Kangaroo’, is Australia’s largest airline. The new headquarters is the largest property project undertaken by Qantas Airways in the last 10 years. The project aims to rejuvenate the existing campus, consolidating and upgrading four existing office buildings and joining them together with an interconnecting hub. Selected areas of the existing building floorplate have been extended into the new atrium space creating balconies and office pods. These improved physical and visual connections aim to encourage interaction and engagement between workers. With a brief for high acoustic performance, SAS International were an obvious choice for Hassell architects, due to our vast portfolio of high acoustic rated metal ceiling tiles. SAS provided 7000m² of SAS310. The acoustic challenge was to control the reverberation time in a large volume space accommodating a PA system and a very high acoustic performance target. The reverberation time was significantly reduced with the addition of absorptive material and purposed designed acoustic ceiling panels. Qantas Headquarters was constructed with longevity in mind so the durability of the tiles was key, an advantage of using metal. The finish completely meets the performance demands, is extremely functional and cost effective, an A Grade corporate campus that incorporates the latest developments in sustainability and energy efficiency.

Designed and built by C Plus C Architectural Workshop. Large format curved glass panels up to 2400mm high x 3500mm girth have been manufactured by Bent & Curved Glass in a variety of glass types to meet the design requirements for thermal performance, privacy, night lighting effects while also maximising natural light and a sense of space and openness. Early consultation between architect, glass manufacturer and frame fabricator and a process of glass sampling, review and selection created the best project outcomes. The quality of these glass elements has made a significant contribution to the success of this exceptional project.

There were two sets of challenges involved in the Rosewood Aged Care.Firstly, waterproofing the basement. The basement was excavated around a heritage-listed building, which had to stay undamaged for the duration of the works. Piles and shotcrete were implemented for the construction, but there was no scope to install a membrane due to space and other limitations. The Markham BASE-TECT system was ideal for this situation.Second were the requirements for moisture control and permanent hygiene protection for the interior floor slabs of the residential parts of the building. This is a more routine challenge, faced by aged care facilities with concrete floor slabs. AQURON 2000 MEDI+ was selected for concrete curing enhancement and permanent hygiene sealing.

The £70 million project saw SAS International design and manufacture bespoke spun alum­inium profiled discs, acoustic metal wall panelling and System 600 rafts in the new terminal. The architects 3D Reid had to make the building light, airy and modern yet the façade and various materials used within the terminal had to withstand potential of a security breach. All products installed ‘land-side’ were required to meet the requirements of Aviation Security in Airport Development (ASIAD). The result answers aesthetic demands, yet provides the highest level of performance for the requirements of the building. For the design to be realised, square aluminium sheets were cut by the manufacturer into a circle and spun into a dome. Installation in such an environment means safety cables had to be attached to each disc, wall panel, tile and raft to ensure they do not fall and cause injury. Allowance for safety cables to be attached had to be taken into consideration during the design phase. Large vertical wall panels with an ultra-micro perforation were also specified to provide the necessary acoustic properties required for this vast open space. The very fine 0.7mm perforation, with 1% open area, helps to manage acoustics within the large open spaced terminal. The off-site modular manufacture of the architectural metalwork products meant installation was quicker, which causes less disruption to such a busy environment, and in addition there is no waste on site. Aesthetic versatility can be achieved using SAS International Architectural Metalwork throughout projects. It also allows for inte­gration of M&E services into the building design while meeting design demands and durability requirements. The range includes acoustic baffles, acoustic wall panels, air handling units, bespoke ceilings, and column casings.

Part of a vast regeneration programme to improve student amenities, the UoB invested £60m in a state-of-the-art academic library. The project aimed to celebrate the wider campus architectural styles and improve access to new resources like e-journals and wireless charging stations. Associated Architects chose SAS International to provide the high acoustic and finishing touches to the academic interior fit-out. In order to create an effective library environment, acoustic performance must also be carefully considered. With the aim to create a space suited for thousands of scholars, bespoke acoustic metal wall panels were supplied to the library. Depending on the location of each tile, the panels were finished in white and black-grey PPC or anodised in regency gold. Specified with a 23% or 50% open area, the panels act as acoustic absorbers with an oblong perforation. Each panel is fitted with a black, fleece-wrapped acoustic pad for high performance. The architects specified three additional acoustic treatments for open soffit areas over computer clusters and lounge spaces. SAS500 baffles and bespoke ring shaped and circular rafts were created by SAS International to fulfil this requirement. The discs and raft-halos are an SAS150 hybrid designed to fulfil acoustic and service requirements while contributing to the contemporary look. Consisting of multiple panels, the concealed grid system creates a smooth finish enclosed using a steel perimeter trim. Long 3m baffles were also installed in a continuous sequence along walkways and group study areas. These options provide durable acoustic solution, minimising maintenance and improving access to the soffit and services.

SAS International provided an unusual feature perforation to a metal ceiling solution for Cork County Council’s redevelopment of their MOT office. The refurbishment of Cork County Council has created an outstanding open plan office for their upgraded MOT Office. Included in the redevelopment is the installation of 240 meters squared of acoustic SAS500, with a unique OB50 perforation, installed within the open plan office, meeting rooms and cellular offices. Conserving the original architectural features was significant when embarking on the reconstruction of the building. SAS500 was chosen to accommodate the spacing of existing structural beams, the system hung on secondary grids to adhere to specific architectural requirements. To adhere to the recent popularity in open soffit trends, SAS500 offers a solution in addition to providing acoustic absorption. A unique OB50 perforation was specified in the design of the baffles for this project. SAS International worked in collaboration with Cork County Council Architects and CField Construction to provide bespoke design solutions for this project.

About the ProjectThe ANZAC Memorial was designed as a sculptural monument, a unique collaboration between Architect Charles Bruce Dellit and sculptor George Rayner Hoff; it is arguably one of the finest examples of the union of architecture and art in Australia.The building is a striking architectural form, symmetrical on both axes. It uses elements reminiscent of traditional Gothic architecture (buttresses, cathedral windows, high ceilings) in the Art Deco style. The Memorial is adorned externally with twenty sculptures representing the units of the Australian Imperial Force (AIF). These are the sentinels of the building, keeping watch while representing the fallen to whom the building is dedicated.Bruce Dellit’s vision for the Memorial included a still pool bounded by poplars to the north of the building (included for their significant symbolic association with the battles in France and Belgium), and a cascading fountain to the south.The Hall of Service, at the centre of the Centenary Extension, is a civic space that architecturally and artistically mirrors the Hall of Silence. The Hall was named in acknowledgment of the original Memorial halls and to recognise more than a century of service by Australian servicemen and servicewomen. At the threshold to the space are the words: “NSW Service with and for All Australians”.The ChallengeWhen restoring a National War Monument visited by hundreds of thousands of people, you need to provide the highest quality results and finishes expected of such a significant structure in our history. The challenge here, comes from creating a restoration solution on a building which was designed in the early 1930’s, which will be flexible enough to maintain the architects core design features but also created and executed within a tight time frame in time for ANZAC day. The solution needed to encompass modern technology with traditional design features to ensure the restoration lasts for the next 100 years as a memorial to our fallen heroes.Tremco SolutionTremco worked closely with Sure Seal and Built to provide a solution which was both timely and high quality. the installers long standing relationship with Tremco, a number of unique solutions, together with a 20 year warranty period proved a success.Over 15,000m2 of Tremco products were installed on this historic site. Tremco provided regular iAudit reports on the job site (iAudits is a quality control measure used to ensure the products are being applied consistently to maintain warranty conditions) During regular site visits, Tremco were able to provide a high level of customised Technical information and design advice to ensure the project ran smoothly and to Built’s expectations.