"single ply roofing"

GAF Energy invests tax equity in commercial and industrial solar installations across the US. We focus on rooftop and carport project investments.

CASE STUDYS LISTED ABOVE IN PICTURE 4

B4112 – Bobrick Soap Dispenser Contura™ | Satin FinishB4262 – Bobrick Paper Towel Dispenser | Contura™B277 – Surface Mounted Waste Bin | Contura ™B4288 – Bobrick Toilet Roll Holder | Contura™RBA4090-450 – 90° Grab Rail, Ambidextrous | AmbulantB6857 – Bobrick Single Toilet Roll Holder | Satin

Challenge750m2 roof with a large quantity of vents, air conditioning units and other equipment on the roof. Add to this problem damaged aging torch membrane, combined with Governments regulations regarding solar absorption and reflectivity of the building posed a real challenge for the applicator when determining a solution for the job.A second challenge for this job is the location of the building was located in the built up CBD of Parramatta with neighbours in close proximity, which meant the solution needed to be neighbourhood friendly.SolutionGiven the complexity of solution required for such a job AlphaGuard BIO is the only product which ticks all the boxes. AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration. Due to AlphaGuard BIO being a liquid, it makes it ideal for jobs where there are machinery on the roof which needs to be worked around.AlphaGuard BIO has the ability to be installed over various existing roofing membranes in order to minimise tenant disruption and extend the life of the roof for an additional 20 years.It cures to form a durable rubber membrane surface that provides a lasting and easy-to clean waterproof coating. AlphaGuard BIO may be used to apply a seamless, monolithic waterproof membrane to concrete, primed metal, or existing roofing membrane surfaces.AlphaGuard BIO’s low VOC will minimise offensive odours to current tenants and applicators. The white top coat provides high solar reflectance, reducing the building’s operation costs and complying with Section J1.3(b) of the 2019 NCC.

COLLABORATIONArchitect: Neeson Murcutt ArchitectsDeveloper: Surf Life Saving NSWBRIEFNeeson Murcutt Architects needed a solution that would protect the glazed ceramic tile roof on the $2.2 million rebuild of the Old Kempsey-Crescent Head Surf Life Saving Club. They wanted to avoid grime and salt accumulation on the roof system with minimal maintenance from the volunteers and to reduce maintenance costs.The architect designed the outside surfaces so they would be durable in the marine environment and easy to maintain. With difficult access to the roof, the builders decided on ECOCLEAN to help with maintenance and cleaning of glazed ceramic roofingMATERIAL & APPLICATIONECOCLEAN Porosity SealerECOCLEAN Self-Cleaning CoatingOUTCOMEUsing the power of daylight, rainwater and dew, ECOCLEAN created a self-cleaning roof that continually breaks down algae, mould and organic matter, which can cause unsightly stains. The Crescent Head Surf Club went on to win three awards including the NSW Sulman Medal for Public Architecture.

Non-slip epoxy flooring in a roof tile factory.

Ausco Modular is one of Australia’s largest construction companies using modular technology. Ausco are part of the world’s largest modular solutions group, Algeco Scotsman, whose global reach and R&D capability is leading the industry on the world’s stage. A full roof replacement and partial renovation was undertaken at the Brisbane manufacturing site. Metroll is proud to be involved with supply of materials to this project and worked closely with the roofing contractor to ensure the project ran smoothly.

THE CHALLENGE: House 30+ new HVAC&R mechanical plant equipment and vents. Retrofitted to the roof of a large, multi-level shopping centre without interrupting regular retail operations.THE SOLUTION: We supplied over 30 EasyMech MR (purlin mount) and Span+ (rafter mount), HVACR platforms in Kit form.Our Span+ (rafter-mount) system, was designed to be 100% penetration-free and installed on the surface of the roof over the rafters.We also supplied walkways, up & overs, and ladders – all in Kit form! Providing savings in cost and time.

The Chadstone Shopping Centre in Melbourne, Australia, is an amazing piece of engineering and architecture. With its stunning gridshell glass roof, the extended building is now the largest enclosed shopping centre in the Southern Hemisphere.

This project is a great example where the client wanted to realise the instant savings of Con-form Group’s engineer certified, rafter mounted system, over costly traditional mounting systems.With a mixture of our EasyMech MR (purlin-mounted), and Span+ (rafter-mounted), HVAC platforms - the client was able to successfully mount all mechanical units across the roof of this mixed-use development in Tasmania.Spanning over 9 metres, this retrofitted Span+ (rafter-mounted), installation answered the clients brief in more ways than one.Rated to 2.5kPa and attached to Con-form Groups proprietary steel stub columns – this platform and it’s screens were retrofitted to the roof of this shopping centre within 2 days.Paired with our Louvre airflow and Classic Screen Walls.

Designed by Smart Design Studio, the building is an honest layering of old and new as expressed by the raw treatment of the exterior façade through to the smooth, modern interior. The rooftop addition connects the double-height banks of glass Breezway Louvres with an articulated aluminium roof folding down as a screen to the back of the building. The end result successfully incorporates flexible and functional office interiors and a two-bedroom rooftop apartment within a rigorously controlled contemporary architecture of old and new.

Designed by Benson McCormack Architects and built by Hone Constructions. The curved glass elements seen at the ground level entry shopfronts and in the feature penthouse facades are key to the undulating design which becomes the signature for the “Wave” Apartments building. In particular the projecting curved façade at each end of the penthouse roof level is a major element of the architectural design and a feature that can be seen from afar. The sweep of the concrete rood appears to float above the skin of curved glass creating a dramatic visual effect.

The Hadspen Bull Run Reserve playground is an excellent example of a community playground that suits everyone! Located within the Meander Valley Council in Tasmania, the park is a central hangout for the community in Hadspen. The vast range of equipment within the park is what makes this playground so special. There is something for all ages and interests, with a play unit, flying fox, multi-user rocker, wheelchair carousel, swings, single rocker, interactive panels, and a fitness station. While there is plenty for children, the fitness station also provides for the older demographic that may be minding the children on the playground, or doing their morning workout. Having the playground accessible was an important feature in the brief provided to adventure+. To reflect this, our design team included rubber paths for access through the playground, with access to low-level interactive panels and a wheelchair carousel. With our serious approach to play, we always aim to make our playground designs engaging and enjoyable. But, making the playground attractive is also essential. Selecting a modern colour scheme, as well as a play panel with an engraved bull image, makes the playground enticing, and ties the design to the name of the park.

Ireland’s second largest legal firm, Arthur Cox, has moved to its new headquarters, Ten Earlsfort Terrace, Dublin. Located a stone’s throw from St. Stephen’s Green, the LEED Platinum fit-out building is a marker of sustainable design. Architects, Scott Talon Walker, had a specific design requirement in mind so chose SAS International for their longstanding relationship and expertise. To accommodate the number of recurring apertures, Scott Talon Walker collaborated with SAS to create bespoke service panels within the SAS330 hinged mega panel tartan grid. The panel design features five unperforated squares which create a single unit capable of housing fire detectors, movement sensors and other electrical devices. These unique panels satisfy the client’s M&E stipulations, ensuring the building’s sustainable performance well into the future. Additional SAS systems installed include: SAS500 acoustic lighting baffles and SAS150. Both of these systems assure complete design flexibility and service maintenance in equal measure. Nominated for Fit Out Project of the Year – Large Office, SAS International has once again exceeded the mark to deliver premium metal ceiling solutions for its client.

Hospitality and security are often at odds with each other. The challenge is to find the best compromise between Fort Knox and a warm welcome. Telecom company Liberty Global recently carried out a major renovation of their head office in Schiphol-Rijk – the Netherlands. As part of the project, the access security was considerably tightened, without affecting their brand’s desired welcoming appearance. Liberty Global is an international telecommunication and television company. It is also one of the largest internet service providers outside the USA. Liberty Global operates in 14 countries and has 35,000 employees. The head office is based in London and additionally there are central offices in Amsterdam and Denver. Consumer brands that belong to Liberty Global include VodafoneZiggo (50% Joint Venture with Vodafone), Virgin Media, UPC, Unitymedia and Telenet. In the high-quality business park - Schiphol-Rijk, Liberty Global have seven office buildings, which, collectively, employ a total of around 1600 people of 55 nationalities. "We did have manned security at the main entrance, but that solution did not always prevent people from entering our central hall unnoticed," says Simon Kuitert, who holds the position of Corporate Security Manager at Liberty Global. "That is why we introduced a single point of entry for the recent renovation."

Ferrero’s new global HQ gathers in one building with nearly 1,300 people, previously spread over five different offices. The building, with a total floor space of almost 30,000 m², opened in December 2019. The building is designed to evoke the atmosphere of an Italian square: a vast atrium is surrounded by two multi-storey office wings. Boon Edam was appointed to craft and install the golden revolving door, on behalf of facade builder Groven + Portal, who in turn worked for general contractor Felix Giorgetti. The colour of the revolving door makes a visual reference to the world-famous golden chocolate - Ferrero Rocher. The Casa Ferrero administrative building consists of two blocks built on a common basement. It was the combination of these plots, and the architectural skills, that resulted in what you see today: a building that is both impressive and elegant as well as being a pleasant and functional workplace for the employees of the food group. Ferrero’s colours are subtly incorporated into the classic facades, with bronze tones and a gilded effect over the windows as well as the entrance glass panels. This effect was achieved by applying a gold-coloured textile fabric to the laminated glass during the project’s construction. Behind the glass facade of the entrance, the most jaw-dropping area of Ferrero’s headquarters unfolds - a central atrium that connects the two blocks and is entirely covered by a glass roof. The spacious atrium is designed to function as a reception and meeting space. Horizontal circulation between the two blocks is facilitated by connecting walkways with a range of 20 meters. The vertical circulation occurs through panoramic glass elevators. The central atrium’s glass-roofed space is open to life within the company and encourages interaction between employees. This 11-storey building, including six upper levels (ground floor + 5 floors) and five lower levels, adapts perfectly to its urban surroundings. The office areas are spread over nine floors, taking advantage of maximum light for the interior space. Levels -3 to -5 include technical areas and parking spaces. Ferrero’s wish was for a functional and pleasant building for everyone who works there. We think they have achieved this in spades!

Imagine waking up in this 4-star luxury hotel with panoramic view of the IJ and the city of Amsterdam. Hotel Jakarta: a BREEAM Excellent certified energy-neutral hotel in Amsterdam. Designed with sustainability in mind. Unique for the Netherlands is the 30-meter-high timber structure of the hotel. All columns, ceilings and frames are made from natural, FSC or PEFC certified wood. The south and east façades are covered with 700 m2 of building-integrated solar energy panels (BIPV panels). The glass roof that covers the atrium also contains BIPV cells that, in addition to collecting energy, also function as sun blinds for the subtropical inner garden. The atrium is the center of the hotel and works as a temperature controller in both summer and winter. On each side of the building, rooms have their own covered outdoor space that functions as a structural awning. A custom made revolving door provides access to the hotel where there is a dynamic public area with various bars, restaurants, coffee corners and a wellness center. This transparent revolving door is almost 6 meters high and fits perfectly with the appearance of the facade. In addition, this type of entrance solution is in line with the sustainability requirements of the building.

Project Location: Amberley, Queensland, AUSTRALIA.In Amberley is one of the largest base facilities in Australia. The redevelopment works are valued at AU$331.5 million. New construction and refurbishment works to be undertaken include newliving-in accommodation, maintenance facilities, storage, working and training accommodation, a combined mess and a new physical fitness centre.The site is owned by an Australian Government Department. The Atlantis® Turf Cell® was supplied by Atlantis and was installed by Kennedy Projects Group in April 2009. The system is located at the playing fields on the south-western corner of Gannet St and Rosewood Road, Amberley, QLD.A vegetated swale surrounds the playing field. The swale is an open, shallow channel designed to slow runoff, filter it, and promote infiltration into the ground. Excess water moving through the soil profile is captured by Atlantis® Matrix® Tank – Single modules. The use of a swale to collected water results in smaller runoff volumes, lower peak discharge rates and cleaner runoff. The vegetation in swales, usually thick grass, helps to trap pollutants such as suspended solids and trace metals. The Atlantis Matrix modules extend 3m (10ft) wide under the swale for 110m (360ft).Water collected by the swale is collected in a stormwater harvesting tank located adjacent to the north-western corner of the playing field. Perforated corrugated plastic pipes used as subsurface drainage pipes extend for 1560m (5110ft) is also collected by the stormwater harvesting tank.The stormwater harvesting tank is located subsurface and is constructed of a heavy duty low density polyethylene liner and non woven geotextile surrounding Atlantis® Matrix® Tank - Double modules. The Atlantis stormwater tank has a 4,100m3 (144,80 ft3) capacity. Water collected by the swale and stormwater tank system is used for irrigation of the sports field.The Atlantis stormwater tank has eight (8) cleanout / inspection ports placed through the systems. A 1200mm (4ft) dia. wet well with bolt down lids has been installed adjacent to the tank serves as a pump out pit. The overflow from the tank has a 15m (50ft) long x 400mm (1.3ft) deep spill way with scour protection into an adjacent creek.

Leading Australian community bank, IMB Bank, has installed a series of Boon Edam entrances, including all glass revolving doors, slimline speedgates and a swing access gate at its new building in Wollongong, NSW.IMB moved into the new building in early 2021, and immediately sought to make the entrance open and welcoming to visitors, with entrance security inside to protect valuable data, intellectual property and people.The Boon Edam technology selected is among the most stylish and efficient of the Boon Edam range used by major banks locally, Fortune 500 companies globally, and corporate HQs in 27 countries.The exterior of the building has two Boon Edam Crystal Tourniket all-glass revolving doors, which create a striking first impression. Inside, there are three Speedlane Lifeline Swing speedgates, including one wide lane suitable for disabled access. In one section, there is also a Winglock Swing access gate that separates off a designated meeting space.“After reviewing a range of product proposals, we found that Boon Edam’s range had the ideal combination of aesthetics and security that IMB was seeking,” said IMB Head of Facilities, Greg Dowd.“The security speedgates give us greater control over access to the building, and they alert us to any tailgating or access breaches. Limiting access to only authorised personnel not only protects our staff, but it also protects the data of our customers, which we always store securely,” he said.“As a further advantage, the Boon Edam team integrated the access control system with our RFID (Radio-Frequency Identification) system. This was a big help, because it meant the speedgates were sending data directly to our existing system.”Boon Edam Managing Director, Michael Fisher, says this impressive project will serve as a new benchmark for local financial institutions. “IMB has set the bar high with it’s new Wollongong facility. Every design element has been carefully thought out to be welcoming to visitors and intuitive to employees. We are delighted to have been selected to contribute to the success of this project.”“Boon Edam is a family-owned organisation with a history extending back nearly 150 years, so it is particularly satisfying to work with a community-minded company like IMB, with a similarly long and successful history,” said Mr Fisher.Responsive serviceIn addition to elegant aesthetics and intelligent security, IMB sought an entrance security partner with attentive service throughout the entire project, and then into after-sales service too.“The Boon Edam team was highly professional to work with, and responded adaptively to our needs. Early mornings were the best time for installation work, and their service team accommodated this need right from the start, without a hassle,” said Mr Dowd.“It was clear that Boon Edam takes great care in its products, and that its values as a company were aligned with IMB’s, which are strongly focused on community, family and quality.”Elegant aestheticsBoon Edam’s Speedlane Lifeline series is one of the slimmest on the market, with the cabinet housing measuring as little as 106mm. The slim nature of the speedgate makes it ideal for narrow entrances, lobbies and foyers, where sometimes an extra lane can be added due to its compact size.“The slim design and finishes of the speedgates was what attracted us to the Boon Edam product in the first place. Their overall designs are sleek, modern and in keeping with our foyer design. We could also customise the materials and colours to suit our foyer, and that really sealed the deal,” said Mr Dowd.“For the front entrance, we couldn’t look past an all-glass revolving door. It lets in an abundance of natural light, making the entire foyer a welcoming space for visitors and employees,” he said.Boon Edam’s Crystal Tourniket doors – available in single and multiple entrance options up to 3.5m diameter and height – are being introduced to Australasia after being proven internationally.The Crystal Tourniket is fully compliant with Australian Standard AS1288 (Glass in Buildings), which specifies safe glazing and installation practices when using glass in buildings.“The other Boon Edam product, the Winglock Swing, provides the ideal separation for our meeting space, without needing a full length Speedlane. It’s finishes and design also perfectly match the rest of our foyer,” said Mr Dowd.Boon Edam’s Winglock Swing is constructed from stainless steel and a single glass panel, creating an access gate that is elegant and unobtrusive in nature and design. Winglock is designed to manage bi-directional traffic with effortless ease, using smart, intuitive technology to guide each visitor through to their destination without delay or inconvenience.

With a glass façade symbolising the transparency of justice and a glossy metal exoskeleton, the new Maison de l’Ordre des Avocats (House of the Paris Bar Association) is a stunning addition to the French capital’s new Batignolles judicial city. For the building owner, safety is a top priority. Therefore, the exoskeleton needed a proven passive fire protection coating that would enable the steel to maintain its load-bearing capacity for up to 60 minutes during a fire, giving those inside valuable extra time to evacuate.The challenge Specialist paint application and surface treatment company ROTH & Cie was contracted to apply the passive fire protection coating system. ROTH & Cie has worked with Hempel for many years and was keen to work with us on this project. However, due to the project schedule, the tubular exoskeleton framework was delivered to the construction site with a competitor’s epoxy primer already applied. ROTH & Cie therefore wanted a Hempel passive fire protection system that would work with the existing primer. Also, as building aesthetics are important in the overall design, the exoskeleton needed a high-quality matt satin finish. The solution Our solution was to specify a system of Hempafire Pro 315 and Hempathane 55750. A single component intumescent coating, Hempafire Pro 315 complies with the EN 13501-2 standard for the fire classification of construction products. It is optimised to provide 60 minutes of passive fire protection, as well as partial protection up to 90 minutes. In addition, thanks to its exceptionally low loadings, Hempafire Pro 315 requires significantly lower dry film thicknesses than competitor products. As a result, ROTH & Cie could apply the coating in a thinner coat, significantly reducing paint consumption, application time and project costs. The full system was completed with Hempathane 55750, a polyurethane topcoat with quick crosslinking properties that provides the matt satin appearance required by the specifications. Our dedicated passive fire protection R&D Centre in Barcelona, Spain verified that Hempafire Pro 315 could be applied on top of the existing primer. The entire system was spray applied using an electric airless pump, which is ideal for construction sites as it does not require an air compressor. The project is just another in a long line of successful collaborations with ROTH & Cie, which also include previous passive fire protection coating projects, most notably La Halle Secrétan covered market and La Samaritaine department store, both in Paris.At a glance Project Name: Maison de l’Ordre des Avocats (House of the Paris Bar Association) Customer: ROTH & Cie System: Hempafire Pro 315 + Hempathane 55750 Volume: 4,080 litres

Acrovyn by Design® from Construction Specialties, was specifically chosen for the new Veterinary Specialist Services (VSS) Hospital in Jindalee, Brisbane, Queensland. The overall objective of the project was to create a bright and welcoming space, as well as an extremely hygienic care environment for the veterinary doctors and staff, the patients (pets) and their owners.The combination of both functionality and design flexibility available with Acrovyn by Design® has allowed the creative “cute pet theme” to be installed behind the wash basins as splash-backs. The images used include a collection of cute animals such as kittens and puppies, which could very easily be executed with the design flexibility and functionality of Acrovyn by Design® wall panel sheets.Veterinary hospitals and lobbies are high traffic environments with a significant amount of equipment, including trolleys and stretchers that can scrape or bump against walls. In addition, they have strict cleaning requirements for high hygiene standards that often requires the use of harsh chemicals, such as bleach, to disinfect hard surfaces.The client’s mission statement is to “provide the best possible care”. To this end, they have 4 different locations around Queensland all operating a 24-hour referral and emergency animal hospital. All facilities have state-of-the-art equipment with experienced and helpful staff. The first of the four hospitals opened to the public in 2000.Acrovyn by Design® has a proven reputation as the preferred choice with many major hospital projects across Australia, including The Royal Hobart Hospital, The Memorial Hospital Adelaide, The Royal Melbourne Hospital and Adelaide’s Calvary Hospital to name a few. It is wonderful to see that the unique qualities of Acrovyn by Design® are now being recognized as suitable for use in the care of our much-loved pets undergoing veterinary care as well.Did you know that the number of Australians who are adopting or fostering pets since the COVID-19 restrictions were introduced has exploded? According to the RSPCA, many people are now adopting pets because they feel that they finally have the time to settle a new animal into their home. It is also believed that home isolation has increased the desire among many single people for a companion. The RSPCA has reported a 45% increase in dog adoptions and a 20% increase in cat adoptions since COVID19 began.Consider Acrovyn by Design® for your next project; for design flexibility, impact resistance and easy to clean maintenance in veterinary hospital environments. In addition, Acrovyn by Design® allows for fast installation when faced with tight project schedules in 24/7, critical care operating workplaces.

Being one of the largest public healthcare precincts in Australia at 160,000 m² and spread across 20 hectares of land at Birtinya north of Brisbane, we present the 750 bed Sunshine Coast University Hospital (SCUH). The SCUH has been designed for Queensland Health to be a world class health facility providing exceptional healthcare to its patients as part of Queensland Health’s vision for the future.Incorporated within this Hospital’s health precinct, this state-of-the-art facility offers numerous services for staff and patients. With all that the SCUH has to offer, it was vital that all the equipment and fittings that were required needed to be compliant, safe, practical and had an exceptional appearance. This is where the CS Group was able to provide a portfolio of products to the project that were both practical and aesthetically pleasing.All hospitals have high volumes of wheeled corridor traffic, these day-to-day movements are commonly encountered in a busy hospital. Due to this traffic, it is difficult to keep walls in their original pristine condition. To try to limit the damage that can be caused by wayward trolleys and gurneys, wall protection is put in place.Construction Specialties have supplied a portfolio of products to the SCUH to meet these needs. Starting with their corner protection for the gyprock walls, the CS Group’s VA 250N corner guard can be found throughout the Hospital in both 90 and 135 degree configurations protecting salient corners from damage. Protecting the walls from damage is CS Model SCR-48N crash rail, a 152 mm wide x 32 mm deep Acrovyn crash rail that is installed in the Hospital in both single and double runs for maximum protection. CS Model HRB-4CN Acrovyn handrail, which also acts as a high-level bump rail, completes the wall protection package.Posing a separate challenge to designers were the two Isolation Wards. Both are located within the Hospital in such a way that neither has access to an external window. Rather than have patients stare at blank walls during their stay, CS were asked if we had a solution to the problem. Our graphic imaging product, Acrovyn by Design was suggested as a possible solution and was accepted. Both wards now have a full height wall mural of a relaxing beach scene to look at rather than a typical blank white hospital wall alongside their beds.With such large footprints, each floor of the Hospital required extensive use of expansion joint covers. Construction Specialties were called on to help with the design and specification of expansion joint covers for the project. The CS Group’s SGR Model expansion joint cover was selected for the project as it is available in various widths, the Hospital being 5 floors, as well as allowing a flush mounted finish. The SGR was also chosen for its ability to accommodate wheeled traffic and meet the stringent requirements of infection control associated with a hospital project.Beautiful and practical are two words that can be used to describe the Sunshine Coast University Hospital. An amazing project featuring various CS products throughout the Hospital.

About the ProjectIn response to unprecedented demand, Rouse Garden is filling the void of modern-day homes close to trains, shops & jobs at the most competitive price on the market. Featuring the diversity of 1, 2 & 3 bedroom homes, there’s something for everyone in the most wondrous apartments to grace Rouse Hill. From floor to ceiling glass walls, timber hardwood flooring in your living room and a private rooftop garden terrace complete with BBQ and lounge areas. The quality of design is worthy of being marvelled at. Living rooms have been purposed to allow seamless indoor and outdoor transitions, blurring the boundaries between inside and out and elevating your home to new heights.ChallengeWhen you are building in one of the premier locations in Norwest Sydney, it’s all about the ding to match the lifestyle your new residents demand from your new community.  Presented with tight detail, the look, the feel and the performance of your build time-lines, and expectations of high quality, Hydraseal were tasked with working on Rouse Gardens. Waterproofing both the internals and roof of the building, the builder demanded warranties to match the project requirements and to deliver a quality finish demanded of this high profile project.To streamline this project, availability of stock and ease of application were key product requirements needed from the project, which Tremco were tasked with delivering.Tremco SolutionVulkem H2 Plus, Vulkem NEM, Tremflex50, Vulkem 951Hydraseal partnered with Tremco for a few reasons, primarily trust built up through a longstanding relationship provided the support necessary for the key for the success in this project.The versatility of Vulkem NEM being able to be used for internal wet areas, in conjunction with Vulkem H2, as well as for outdoor areas under Vulkem 951 NF allowed for fast and consistent application of waterproofing on the project, given the tight time frames, all backed with long warranties to match product performance.The combination of Vulkem NEM, Vulkem 951 NF and Vulkem H2 provided the warranties demanded by the builder which resulted in both Builder, and Applicator very satisfied with the job. 

The City of Boston is known for many things – from Fenway Park to the Boston Marathon to the bar from Cheers, the city is full of iconic landmarks, events, cultural assets, education centers, and more. The City is also recognised for its vast history, especially downtown, where hundred-year-old buildings have been preserved or restored. There is also a mixture of new property development, including 33 Congress Street, in the heart of the financial district, which combines the best of historical design with new construction. 33 Congress incorporates more than 400,000 square feet of office and retail space, transforming the historic neighborhood and positioning the area as a dynamic downtown destination. The project was designed by Arrowstreet, an award-winning architecture and design firm, and was led by Jason King, AIA, LEED, AP, BD+C, Senior Associate for Arrowstreet. Blending Historical Features with a Modern Design According to King, the 33 Congress Street building consisted of three different structures that were built at separate times: in 1904, 1906, and in 1922 and then all combined into one space. While the space functioned as one building, there were three separate elevator cores, sets of restrooms, sets of stairs, and more. Those entities needed to be reconfigured into one. The most striking feature of 33 Congress is a new, modern glass and steel structure, containing 6 additional floors of office space that sits on top of the original three masonry buildings. Another important project goal was to upgrade the main lobby to a modern design that allowed public access, increased security for building employees, and respected several historical aspects. “We needed a way to get people into the new, main elevator lobby quickly due to the high volume of traffic that we were anticipating would take place after the redesign,” King said. “We also wanted to create an entrance that would create a better flow of entry from the sidewalk into the building.” The original building had an existing revolving door, but it was small and surrounded by stone. “It was dark and uninviting,” King said. “We were creating an open and airy Class A lobby space and wanted visitors to clearly see the ornate, coffered ceiling and experience the grand and historic nature of the lobby as they entered.” Revolving Door and Speed Gates Provide Aesthetics and Function King implemented a Boon Edam Crystal Tourniket manual revolving door to lead visitors in the double height lobby space. The Crystal Tournket is constructed virtually completely from glass with only a few stainless steel accents to ensure the solidity of the revolving door. It fits seamlessly with modern glass facades but can also be a beautiful eye catcher in more traditional or classic designs. For employee access, the building’s previous design did not incorporate turnstiles to the elevator banks. “The building did have card reader access, but only at certain doors and locations,” King said. King installed four lanes of Boon Edam Lifeline Speedlane Swing speed gates and two Winglock Swing model access gates to provide secure employee access to the building’s upper floors. The Lifeline Speedlane Swing speed gate manages and channels the flow of people entering and moving around buildings. It employs sensors that detect visitors approaching, with pulsing light strips to guide the user. A sleep function saves on energy use. It can be customised with dimensional and glass choices, including corporate identity colors or other options, so that it either blends-in or stands-out from its surroundings. The Boon Edam Winglock Swing is constructed from stainless steel and a single glass panel, and is unobtrusive in nature and design. The access gate easily manages bi-directional traffic, with LED lights that signal if the gate is in use or on standby. The access gate ties into a manned security desk located near the front doors. Employees gain access to the building through either the Lifeline turnstiles, or a Winglock Swing access gate, while building visitors can receive credentials at the security desk. King said, “We started the process looking at Boon Edam from a security and an aesthetic standpoint. We went through multiple product options but always had a Boon Edam product as the basis of the design. We have been happy with Boon Edam entrance solutions and we are planning to use them again for future projects.”