"roof tiles"

Non-slip epoxy flooring in a roof tile factory.

COLLABORATIONArchitect: Neeson Murcutt ArchitectsDeveloper: Surf Life Saving NSWBRIEFNeeson Murcutt Architects needed a solution that would protect the glazed ceramic tile roof on the $2.2 million rebuild of the Old Kempsey-Crescent Head Surf Life Saving Club. They wanted to avoid grime and salt accumulation on the roof system with minimal maintenance from the volunteers and to reduce maintenance costs.The architect designed the outside surfaces so they would be durable in the marine environment and easy to maintain. With difficult access to the roof, the builders decided on ECOCLEAN to help with maintenance and cleaning of glazed ceramic roofingMATERIAL & APPLICATIONECOCLEAN Porosity SealerECOCLEAN Self-Cleaning CoatingOUTCOMEUsing the power of daylight, rainwater and dew, ECOCLEAN created a self-cleaning roof that continually breaks down algae, mould and organic matter, which can cause unsightly stains. The Crescent Head Surf Club went on to win three awards including the NSW Sulman Medal for Public Architecture.

GAF Energy invests tax equity in commercial and industrial solar installations across the US. We focus on rooftop and carport project investments.

CASE STUDYS LISTED ABOVE IN PICTURE 4

Installation of floor and wall coverings, Sealants application, Surface preparation, Tile & stone installation systems, Waterproofing

COLLABORATIONSchool cleaning and maintenance teamBRIEFSchool bathrooms are notorious for bad smells, mould and stains. Our ECOCLEAN team were asked to apply our coatings to the ceramic floor and wall tiles and ceiling surfaces in the boy’s bathroom to reduce smell and provide easier clean.MATERIAL & APPLICATIONECOCLEAN Anti-Odour Coating (for wall tiles)ECOCLEAN Clean and Protect Shield (for floor tiles)ECOCLEAN Antimould Coating (for ceiling)OUTCOMEOnce applied, our ECOCLEAN coatings will remove the unpleasant odours, virus and bacteria that come into contact with the coated surface with the added benefit of easy cleaning.Before application the school bathroom scored a reading a 18,494 RLC on the Lumitester (classified as very dirty). Following cleaning and application of our ECOCLEAN coatings the bathroom presented with a reading of 887 RLU on the Lumitester showing a dramatic improvement in health and safety of the bathroom. Further testing also concluded that the bathroom was much less slippery than prior to the application.ECOCLEAN has provided this bathroom with a fresher and cleaner environment which has also improved the health and safety of all visiting students.COMMENTECOCLEAN coatings have been independently laboratory tested on a wide range of common substances responsible for acrid smells and health issues. These substances are the source of unpleasant odours in a range of environments including bathrooms, smoking areas, gyms, and areas near food waste.

Jewel on the Gold Coast (Jewel), a luxury development of three crystalline towers constructed on the internationally renowned Surfers Paradise beachfront, Gold Coast. Jewel consists of 513 apartments and a 169-room luxury hotel – a first of its kind on the Gold Coast. The towers with their distinctive glass curtain walling system, are the result of a collaboration between Oppenheim Architects and DBI Design. The fundamental design concept drew inspiration from three smoky quartz crystals that we discovered in the region. Jewel is inspired by the crystalline volcanic hook that forms the underlying structure at the coastline and, in particular, the Gold Coast’s iconic hinterland. Multiplex was awarded this prestigious project and commenced construction of this billion-dollar development in 2016. The Jewel is Australia’s largest beachfront mixed-use development and the first absolute beachfront development on the Gold Coast in more than thirty years. Tilecorp Pty Ltd. was awarded the tiling contract on the project that included the installation of 600 x 300 mm porcelain tiles in the public areas, travertine in the apartments, penny round mosaics on the walls in the public amenities, and cobblestone in the outdoor areas.

This unique offset ellipse design tower had to allow the ceiling to flow around the building. A bespoke SAS330 metal ceiling system was specified incorporating trapezoidal panels. Trust Tower forms one of three new tower blocks; part of the Central Market development. The first tower to be completed is tower three a 59-storey commercial office development. The tower is a unique offset ellipse design, to allow the ceiling to flow around the building a bespoke. SAS330 metal ceiling system was specified incorporating trapezoidal panels. Enabling a monolithic finish to the ceiling plane, black service troughs house recessed lighting and other MEP services; this enables maximum acoustic performance to be achieved from the ceiling tiles. Over 900 different sized ceiling tiles were manufactured and installed throughout the project. Metal ceilings provide durability, accessibility to the ceiling void and low maintenance. The life-span of SAS International’s metal ceilings is in excess of 25 years with only very basic maintenance. The entrance mezzanine area features a four-storey high ceiling finished in midnight blue, providing a dramatic entrance to this iconic building.

Challenge750m2 roof with a large quantity of vents, air conditioning units and other equipment on the roof. Add to this problem damaged aging torch membrane, combined with Governments regulations regarding solar absorption and reflectivity of the building posed a real challenge for the applicator when determining a solution for the job.A second challenge for this job is the location of the building was located in the built up CBD of Parramatta with neighbours in close proximity, which meant the solution needed to be neighbourhood friendly.SolutionGiven the complexity of solution required for such a job AlphaGuard BIO is the only product which ticks all the boxes. AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration. Due to AlphaGuard BIO being a liquid, it makes it ideal for jobs where there are machinery on the roof which needs to be worked around.AlphaGuard BIO has the ability to be installed over various existing roofing membranes in order to minimise tenant disruption and extend the life of the roof for an additional 20 years.It cures to form a durable rubber membrane surface that provides a lasting and easy-to clean waterproof coating. AlphaGuard BIO may be used to apply a seamless, monolithic waterproof membrane to concrete, primed metal, or existing roofing membrane surfaces.AlphaGuard BIO’s low VOC will minimise offensive odours to current tenants and applicators. The white top coat provides high solar reflectance, reducing the building’s operation costs and complying with Section J1.3(b) of the 2019 NCC.

7000m² of SAS310 helped Qantas Airways overcome acoustic challenges, controling reverberation time and meeting a very high acoustic performance target. Qantas Airways Limited, nicknamed ‘The Flying Kangaroo’, is Australia’s largest airline. The new headquarters is the largest property project undertaken by Qantas Airways in the last 10 years. The project aims to rejuvenate the existing campus, consolidating and upgrading four existing office buildings and joining them together with an interconnecting hub. Selected areas of the existing building floorplate have been extended into the new atrium space creating balconies and office pods. These improved physical and visual connections aim to encourage interaction and engagement between workers. With a brief for high acoustic performance, SAS International were an obvious choice for Hassell architects, due to our vast portfolio of high acoustic rated metal ceiling tiles. SAS provided 7000m² of SAS310. The acoustic challenge was to control the reverberation time in a large volume space accommodating a PA system and a very high acoustic performance target. The reverberation time was significantly reduced with the addition of absorptive material and purposed designed acoustic ceiling panels. Qantas Headquarters was constructed with longevity in mind so the durability of the tiles was key, an advantage of using metal. The finish completely meets the performance demands, is extremely functional and cost effective, an A Grade corporate campus that incorporates the latest developments in sustainability and energy efficiency.

Ausco Modular is one of Australia’s largest construction companies using modular technology. Ausco are part of the world’s largest modular solutions group, Algeco Scotsman, whose global reach and R&D capability is leading the industry on the world’s stage. A full roof replacement and partial renovation was undertaken at the Brisbane manufacturing site. Metroll is proud to be involved with supply of materials to this project and worked closely with the roofing contractor to ensure the project ran smoothly.

THE CHALLENGE: House 30+ new HVAC&R mechanical plant equipment and vents. Retrofitted to the roof of a large, multi-level shopping centre without interrupting regular retail operations.THE SOLUTION: We supplied over 30 EasyMech MR (purlin mount) and Span+ (rafter mount), HVACR platforms in Kit form.Our Span+ (rafter-mount) system, was designed to be 100% penetration-free and installed on the surface of the roof over the rafters.We also supplied walkways, up & overs, and ladders – all in Kit form! Providing savings in cost and time.

The Farr Institute in Edinburgh is a collaboration between six Scottish Universities and the NHS National Services Scotland. They aim to place the country as a global leader in health informatics research whilst improving the health of the Scottish population. 30,000 sq. ft. has been fitted out to accommodate Bio Incubator laboratories and offices together with meeting, conference and dining facilities. The remainder of the building will accommodate laboratories and offices for life science research. SAS International’s acoustic baffles were specified to meet acoustic demand and make the most of the high ceilings and breathable space. The colours, baffle layout and service integration were carefully co-ordinated to the brief. SAS130 and SAS330 were specified and installed in the central core. Both systems offer quick and easy access to otherwise hidden mechanical and electrical systems. With SAS130, tiles can be lifted out to gain access to the ceiling void. SAS330’s hinge notch allows tiles to be hung vertically from C-Profiles, providing unobstructed access to the ceiling void. Ray Kwiecinski at Michael Laird Architects gave the below quote on working with SAS International; “MLA has specified a variety of SAS International’s lay-in grid ceiling systems over the years and we have always been extremely satisfied with the finished product. At the Farr Institute however, we decided to create a feature of the structural soffits and the M&E services and, by careful coordination of these services, the steel beams… [With] the SAS Baffle System and SAS Raft System 600, we were able to create an open, collaborative and exciting office environment whilst maintaining a high degree of sound absorbency. Our Client is delighted with the results as are we.” The Institute’s independent research will support innovation in the public sector, leading to advances in preventative medicine, improvements in NHS care and better development of commercial drugs and diagnostics.

The Chadstone Shopping Centre in Melbourne, Australia, is an amazing piece of engineering and architecture. With its stunning gridshell glass roof, the extended building is now the largest enclosed shopping centre in the Southern Hemisphere.

This project is a great example where the client wanted to realise the instant savings of Con-form Group’s engineer certified, rafter mounted system, over costly traditional mounting systems.With a mixture of our EasyMech MR (purlin-mounted), and Span+ (rafter-mounted), HVAC platforms - the client was able to successfully mount all mechanical units across the roof of this mixed-use development in Tasmania.Spanning over 9 metres, this retrofitted Span+ (rafter-mounted), installation answered the clients brief in more ways than one.Rated to 2.5kPa and attached to Con-form Groups proprietary steel stub columns – this platform and it’s screens were retrofitted to the roof of this shopping centre within 2 days.Paired with our Louvre airflow and Classic Screen Walls.

Acoustic SAS International metal ceiling systems were installed in the eight-storey Eqwater office building in Paris. SAS International’s SAS330 was installed throughout the office areas in the building. SAS330 is a lay-in metal ceiling tile system that provides functionality and outstanding acoustic performance for a range of cost-effective design options. The practical nature of its structure allows ease of construction and maintenance. The corridors of the building were fitted with SAS International’s SAS205. In some areas it is not possible to use a standard hanging bracket due to the number of services in the ceiling void, SAS205 is supported at the perimeters, up to a maximum width of 3000mm, making it a perfect solution for corridors. Metal offers an inert and inherently hard-wearing surface, making metal ceiling systems both hygienic and a low-maintenance option over the course of their lifespan. Only a simple cleaning routine is required. The lifespan of SAS International’s metal ceilings is in excess of 25 years with only very basic maintenance.

Designed by Smart Design Studio, the building is an honest layering of old and new as expressed by the raw treatment of the exterior façade through to the smooth, modern interior. The rooftop addition connects the double-height banks of glass Breezway Louvres with an articulated aluminium roof folding down as a screen to the back of the building. The end result successfully incorporates flexible and functional office interiors and a two-bedroom rooftop apartment within a rigorously controlled contemporary architecture of old and new.

Designed by Benson McCormack Architects and built by Hone Constructions. The curved glass elements seen at the ground level entry shopfronts and in the feature penthouse facades are key to the undulating design which becomes the signature for the “Wave” Apartments building. In particular the projecting curved façade at each end of the penthouse roof level is a major element of the architectural design and a feature that can be seen from afar. The sweep of the concrete rood appears to float above the skin of curved glass creating a dramatic visual effect.

The Roads & Maritime Services (RMS) now benefit from a highly progressive workspace in their newly refurbished head office on Parramatta Street. The main aim of the refurbishment project was to improve facilities and collaborative spaces for staff and visitors. However, a significant challenge for the contractors was to keep all existing communications rooms fully operational throughout the project. Achieving the Aim: SAS800 Trucell ceilings were installed in the open plan lounges and stairwells of the renovation. Creating a grid of squares, strong lines stretch the length and breadth of the collaborative space. The system gives a decorative feature to the fit-out with the illusion of a much larger space for activity-based working. Comfortable lounge furniture and bright colours have also been chosen to encourage communication and create a flexible working space. Meeting the Challenge: Specified with a lay-in exposed grid, each tile slots in place without the need for gaskets or cutting. With the building in constant use, installation was quick and easy keeping the project on schedule with minimal disruption. Popular in Australian CBD property markets, the refit considers occupant well-being with Grade A ‘end of trip’ facilities. An upgraded lobby area also contributes to the value-added space with an improved experience for employees and visitors alike.