"concrete framed systems"

Challenge750m2 roof with a large quantity of vents, air conditioning units and other equipment on the roof. Add to this problem damaged aging torch membrane, combined with Governments regulations regarding solar absorption and reflectivity of the building posed a real challenge for the applicator when determining a solution for the job.A second challenge for this job is the location of the building was located in the built up CBD of Parramatta with neighbours in close proximity, which meant the solution needed to be neighbourhood friendly.SolutionGiven the complexity of solution required for such a job AlphaGuard BIO is the only product which ticks all the boxes. AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration. Due to AlphaGuard BIO being a liquid, it makes it ideal for jobs where there are machinery on the roof which needs to be worked around.AlphaGuard BIO has the ability to be installed over various existing roofing membranes in order to minimise tenant disruption and extend the life of the roof for an additional 20 years.It cures to form a durable rubber membrane surface that provides a lasting and easy-to clean waterproof coating. AlphaGuard BIO may be used to apply a seamless, monolithic waterproof membrane to concrete, primed metal, or existing roofing membrane surfaces.AlphaGuard BIO’s low VOC will minimise offensive odours to current tenants and applicators. The white top coat provides high solar reflectance, reducing the building’s operation costs and complying with Section J1.3(b) of the 2019 NCC.

Amazon HQ2 is part of the Metropolitan Park site, an existingurban renewal and development project in National Landing.The first phase of our “ground-up” construction will see theredevelopment of a block of vacant warehouses into two newLEED Platinum-certified buildings, new retail space for areabusinesses, and plenty of open space for the community toenjoy. These buildings are the first step to creating an urbancampus where Amazon’s future 25,000 employees and thelocal community can live, work and play.Miller & Long delivered an estimated 106,555 cubic yards(81,467 cubic metres) of concrete made with CarbonCure, whichwill save approximately 2,522,000 pounds (1,144 tonnes) of CO2.

Located in Fortitude Valley in the heart of Brisbane. Builder, Multiplex began Stage 1 of this $200m project in May 2015 and completed it in July this year. Subcontractor, Precision Interior Walls & Ceilings enlisted Rondo’s expertise in designing the internal ceilings and partitions, external walls and soffit framing. Designed by Architect’s Elenberg Fraser, Stage 1 of the development consisted of 32 levels with 910 luxury apartments sprawled across two towers. This will eventually form part of three residential towers incorporating ground floor retail areas, cafés, restaurants and over 1000 apartments in total.

Designed and built by C Plus C Architectural Workshop. Large format curved glass panels up to 2400mm high x 3500mm girth have been manufactured by Bent & Curved Glass in a variety of glass types to meet the design requirements for thermal performance, privacy, night lighting effects while also maximising natural light and a sense of space and openness. Early consultation between architect, glass manufacturer and frame fabricator and a process of glass sampling, review and selection created the best project outcomes. The quality of these glass elements has made a significant contribution to the success of this exceptional project.

CollaborationArchitects: Johnson Pilton Walker (JPW) and the Government Architect’s Office.Builder: Built.Material & ApplicationFunctional Coatings were applied to precast concrete elements to protect the memorial from carbonation in addition to giving the surface self-cleaning and air-purification propertiesOutcomeA stunningly sustainable multi-award winning project that includes the prestigious Sulman Medal. Our team is so proud to have played a part in the preservation of one of Sydney’s most iconic monuments, a symbol of our history and our future.TestimonialThe Anzac Centenary Project not only realises the vision from our past, it will continue to remind future generations of the contributions made by our servicemen and women.The Right Hon. Clover Moore, Lord Mayor of Sydney

Collaboration Architect: Fjmt StudioBuilder: Icon CoPrecaster: Advance PrecastDeveloper: Golden Age Group and HannasMaterial & ApplicationECOTONE Minsil applied in Cold Light as specified by the architect to the external precast concrete elements.OutcomeThe Harrington Collection design was inspired by the history of The Rocks and Sydney’s splendid harbour. ECOTONE was able to work closely and in collaboration with our clients to produce a truly special Colour by Design for this project.TestimonyWe are excited to bring such a rare opportunity to such an iconic location, and have ensured every detail is carefully considered to reflect our commitment. These residences are designed to be the perfect blend of modernity and heritage to celebrate the complexity and beauty of The Rocks and the existing cityscape.Jeff Xu, Golden Age Group

CollaborationArchitect: Fender Katsalidis ArchitectsBuilder: Crema ConstructionsPrecaster: Bianco PrecastDeveloper: GurnerMaterial & ApplicationWe customised a natural looking off-white concrete stain to meet the design requirements. The ECOTONE Minsil was applied at the factory to transform the contoured grey precast upstand elements to a uniform off white appearance.OutcomeThe ECOTONE coated precast elements, once installed onsite, became part of a striking façade of the Saint Moritz luxury mid-rise development situated on the famous St Kilda Beach.TestimonialThe design of the buildings is driven by a desire to create absolute visual connectivity with the elements of nature and the everchanging state of the bay, whilst providing a serene interior environment for the residents.Nicky Drobis, Fender Katsalidis

CollaborationArchitect: Koichi TakadaBuilder: Hutchinson BuildersDeveloper: Crown GroupBriefThe colour-coated precast concrete of this high-end luxury apartment building required a long-lasting, low maintenance, and cost-effective solution to maintain its stunning appearance.Material & ApplicationECOCLEAN Porosity CoatingECOCLEAN Self-Cleaning CoatingOutcomeECOCLEAN is proud to be part of yet another award-winning and architecturally designed building. The invisible photocatalyst coating self-cleans the exterior surfaces of the building and purifies the air providing a sustainable and economical cleaning solution that also reduces air pollution.TestimonialArc represents an architectural statement that combines craftsmanship and texture to create a contemporary tower that respects the rich historical context of its surrounding urban fabric.Koichi Takada 

Collaboration Architect: PB&A ArchitectsBuilder: Ganellen ConstructionPrecaster: ConcretecDeveloper: Young & PartnersMaterial & ApplicationWe created and applied various tones of ECOTONE Matt and ECOTONE Sharp to grey brick moulded precast concrete to replicate natural brickwork. Application completed within the Concretec precast yard with final finishing onsiteOutcomeAll ECOTONE colours were customised in consultation with the client to deliver a realistic aesthetic in line with the architect’s vision.TestimonialThanks for the really great job your team have done on the project. It looks bloody fantastic.The detail and effort you have put into the brick authenticity really lifts the entire project above where even we had hoped it would be. We are extremely pleased with the result, and I hope we get to work again on a future projectPeter Allison, PB&A Architects

The King George Park features the following RBA products:RBA8847-156 – Stainless Steel Toilet | Ambulant SuiteRBA4150-101 – Accessible Compliant Backrest | StandardRBA4040-300 – 40° LH + 300 Straight | Grab Rail SetKB200-01 – Koala Kare Baby Change Table Horizontal | GreyB2890 – Jumbo Toilet Roll HolderRBA8847-428 – Stainless Steel Toilet | Accessible SuiteRBA4090-450 – 90° Grab Rail, Ambidextrous | AmbulantRBA8889-186 – Curvalinear™ BasinB295x14 – Accessible Compliant Stainless Steel ShelfB715E – Bobrick Elan Hand Dryer | StainlessB165-1824 – Glass Mirror with Stainless Frame | BudgetRBA8864-100 – Basin | Wall MountedRBA1083-607 – Water Saving Tap | Satin Stainless 5.0L/m

One New Change features SAS International bespoke metal ceiling panels with an expanded metal mesh, finished in silver, red and black. The ground-breaking, bold and perceptive £300 million One New Change mixed-use development project won the MIPIM AR Future Project Award 2010. Now complete, the building has become known as the ‘Stealth Bomber’ after the radar-proof combat plane that inspired its faceted form and has also won a RIBA 2011 Award for London and LDSA Building Excellence Award. The design incorporates pedestrian arcades converging at the core of the building, reinstating a historic north-south pedestrian route and allowing new panoramas of London’s landmark St Paul’s Cathedral. SAS International supplied the ceiling solution for the retail corridors of the development with a concealed suspension system, working closely with the architects to create a result where no visible fixings can be seen through the ceiling plane. To complement this, bespoke metal ceiling panels were produced with an expanded metal mesh, finished in silver, red and black. A challenging material to work with, to ensure the mesh held a uniform shape and corners for the panels could be formed accurately, SAS International’s solution was to create a ‘picture frame’ behind each panel. This also helped to provide support for the concealed attachment bolts. Design challenges at One New Change included the building grid size and shape (it was termed the most difficult site in Europe), the complex geometry of the structure (including some tight ceiling to structural beam heights), and a shared fire strategy between retail and office storeys. Requirements to achieve an environmentally-friendly building, complying with Part L and BREEAM ratings, were also critical and the design uses a materials palette of limestone, metal, mirror and a new method of fritted glass on the exterior to help shield the interior from glare.

CollaborationArchitect: Space Cubed DesignBuilder: Zero 9 ConstructionsMaterial & ApplicationOur ECOTONE team created and applied a white colour finish using ECOTONE Matt to the grey brick moulded precast concrete. The surface was then protected and sealed with ECOCLEAN Clean and Protect Shield to provide a gloss finish which would also be easy to clean and provide antimould, anti-bacterial and antiviral benefits.OutcomeThe architect had included a gloss white brick to the interior colour scheme however supply became an issue. ECOTONE was asked to step in and collaborate with the design team to deliver a durable gloss white colour finish while maintaining a grey mortar realistic effect. A truly stunning and sustainable Colour by Design!TestimonialThe ECOTONE team were very professional to deal with from the start of the process. The guys on site were friendly, professional and did a very neat job. The product itself is amazing, we applied the clear sealer on top of the white ECOTONE stain to the bricks, nothing sticks to it and it is very easy to clean.Adam Fisher, Zero 9 Constructions

his project saw a number of our systems installed including six of our EasyMech MR platforms in varying sizes, ScreentoRoof MR system, ClassicScreen Walls and our Acoustic+ screen wall system.We consulted with the team from design to install to ensure a smooth and seamless experience.For more information on our systems, contact our Customer Care Team today.

To protect the priceless infrastructure and mission-critical IT information in Australia’s first custom built, high-tech data centre, Polaris, Project Manager Thiess turned to the leading manufacturer of specialist building products, Construction Specialties.Integral to the $121 million construction was the regulation of airflow to safeguard the computer hardware; Construction Specialties’ customised performance louvres were the only product in Australia able to meet this construction challenge.Boasting 14,000m2 of floor space on 5 storeys with 7000m2 of raised floor over three data centre levels, the project, based in Springfield, Queensland, is the largest of its kind in Australia and will be Queensland’s only Tier 3+ data collection point.So important were the Construction Specialties performance louvres to the development, much of the building design was driven by the positioning, material specifications and design of the louvres.Lawrence Issa, Project Manager for Construction Specialties, and project partners Darryl Wright and Steve Emery of Project Sales worked closely with the Polaris construction team from project inception to completion to devise the most effective weatherproofing and airflow option for the building which also matched the intended aesthetic.“In-depth collaboration with the Polaris team led to the selection of our Architectural Line Louvres, of which two types were used – our RS7305a and LSM louvre models,” Lawrence said. “Unlike other louvres on the market, this range prevents up to 99% water penetration and maximises airflow, while also complementing the building facade as the horizontal louvre frames selected are hidden from view.“Our performance louvres cover 345m2 of the exterior building and are specifically customised in terms of size, shape and colour for the data centre,” Lawrence said.Miguel Thievent, Senior Project Engineer at Thiess, remarks that the CS Louvres perform to the highest standard, which was essential in meeting the building specifications.“It was vital we didn’t compromise on weather proofing and airflow,” Miguel said. “For example, we have six generators integral to maintaining the whole IT system in case of power failure which would not run if the airflow was affected or they were damaged by rain.“The Construction Specialties performance louvres were the only ones on the market that could guarantee damage would not occur as a result of bad weather conditions,” Miguel said.Construction Specialties’ performance louvres are at the leading edge of louvre design and are tested under real world conditions to meet the maximum standards demanded.Construction Specialties offers a broad selection of louvres under 3 main categories:Storm Resistant/Performance Louvres – The main objective of Performance Louvres is to allow the passage of air, whilst providing the area beyond the room with protection from rain penetration.Standard Louvres – A standard louvre will provide the maxiumum airflow required, but with minimal rain defence.Screening Louvres – Screening louvres, are low cost solutions that hide plant or other equipment from view.CS Louvre systems are available in a comprehensive range of finishes and colours, ensuring there is a Construction Specialties Louvre system to suit most aesthetic and performance needs.Louvre panels are factory assembled in a controlled and quality assured environment and provided to site in a fully finished modular form; thus, allowing for trouble-free and fast installation.A comprehensive range of accessories including insect/bird mesh and blanking panels in various materials and finishes is available to complete the application.

As the project was located in Hobart, it required the project team including Rondo to work together to be organised and keep a clear path of communication. This resulted in the full specification being completed early in the process, the specification included Rondo Wall Stud, KEY LOCK Ceiling Systems, DUO Ceiling Systems, External Soffit Systems and our extensive knowledge on seismic design.

The entire building also featured ceilings acoustically isolated from the old structure where heavy duty isolators were required to be incorporated into the Rondo KEY-LOCK Concealed Suspension System. Similarly Rondo had to design a supplementary suspension system beneath these ceilings to accept a secondary system to support some services and particularly architectural feature ceiling beneath.

Imagine waking up in this 4-star luxury hotel with panoramic view of the IJ and the city of Amsterdam. Hotel Jakarta: a BREEAM Excellent certified energy-neutral hotel in Amsterdam. Designed with sustainability in mind. Unique for the Netherlands is the 30-meter-high timber structure of the hotel. All columns, ceilings and frames are made from natural, FSC or PEFC certified wood. The south and east façades are covered with 700 m2 of building-integrated solar energy panels (BIPV panels). The glass roof that covers the atrium also contains BIPV cells that, in addition to collecting energy, also function as sun blinds for the subtropical inner garden. The atrium is the center of the hotel and works as a temperature controller in both summer and winter. On each side of the building, rooms have their own covered outdoor space that functions as a structural awning. A custom made revolving door provides access to the hotel where there is a dynamic public area with various bars, restaurants, coffee corners and a wellness center. This transparent revolving door is almost 6 meters high and fits perfectly with the appearance of the facade. In addition, this type of entrance solution is in line with the sustainability requirements of the building.

With a demand for leading scientific research facilities growing year upon year, the South Australian Government commissioned the development of the South Australian Health & Medical Research Institute (SAHMRI). Since the project commenced in 2010, Rondo has supplied our KEY-LOCK Suspended Ceiling System, Steel Stud and Track, DUO Exposed Grid Ceiling System, PANTHER Access Panels, Shaftwall and Walk-About Trafficable Ceiling System.

he developments $247.3m price tag makes it marginally more expensive than the $246m Adelaide University building next door. HIB will house the Centre for Cancer Biology and UniSA’s pharmacy school, with 450 researchers between them. Rondo’s involvement included providing ceiling and wall systems using our Shaftwall One-Way Erected System, KEY-LOCK Concealed Ceiling System and PANTHER Access Panels to create the desired effect.

The refurbishment of the Victoria Gardens shopping centre designed by Colab Design Studio uses Sculpform's Aluminium Click-on Batten system to create a stunning curved Oculus, along with feature walls and ceilings throughout the centre. Sculptform’s Click-on batten system provided a unique solution that could be customised to address the incredibly complex geometry of the existing architecture. Being able to use the same system for the mall cladding, mall ceiling installations and the oculus cladding ensured absolute consistency across the entire centre.

The project has called on our Technical Services Team for wall and ceiling designs, with significant quantities of Rondo systems used in the project including Rondo Stud and Track, KEY-LOCK Concealed Suspended Ceiling Systems and PANTHER Access Panels.

Rondo Technical Representative Tino Cucinotta, worked closely with the 2DG team – and assisted with the supply of QUIET STUD Acoustic Wall System, Stud & Track and Finishing Sections, whilst Rondo’s newly released XPRESS Drywall Grid Ceiling System was due to arrive, ensuring the project could continue efficiently.

The Rondo Technical Services Department worked closely with CSR Gyprock to come up with a suitable External Wall system. The project consists of over 30,000 lineal metres of 92 1.15bmt lipped studs used for the external wall system and over 45,000 lineal metres of 64mm 0.50bmt lipped studs for the internal walls.

Rondo worked with Forman Commercial Interiors and Alpha Holdings on the three storey, $40 million project by providing all of the Steel Stud and Track requirements along with the KEY-LOCK Concealed Suspended Ceiling System. Due to the various wall systems designed, Rondo supplied diagrammatic specifications for the junction details to assist in completing the project, which finished in August this year.

Rondo worked closely with contractor Future Carpentry and Ceilings providing 92mm Stud & Track Systems, Key-Lock Ceiling Systems and heavy gauge Rondo products externally, throughout the project. A special feature in the design involved an intricate ‘wave’ ceiling feature requiring both convex and concave curved Rondo TCR sections to achieve the desired effect.

Rondo worked closely with contractor Future Carpentry and Ceilings providing Rondo 92mm Stud & Track Systems, KEY-LOCK Ceiling Systems and heavy gauge Rondo products externally, throughout the project. A special feature in the design involved an intricate ‘wave’ ceiling feature requiring both convex and concave curved Rondo TCR sections to achieve the desired effect.

APPLICATION: 52mm Drainage Cell.PROJECT LOCATION: Silkstone Qld.PROJECT DETAILS: Parking Bays at the Silkstone Primary School.PROJECT COMPLETION: Sep 2013.Atlantis system saves big old tree.At Silkstone State school Qld. a contentious issue arose. The school required car parking and a sealed one at that. But, in the proposed car park was a huge old tree. The tree could be cut down and the roots dug out or the tree couldbe left, with open soil above the root system to allow for infiltration to keep the tree healthy; but this would lose atleast six car spaces. What was to be done?The answer turned out to be simple – keep the tree, but surround the tree with Atlantis® Gravel Cell™ 52mm cells.Hence while the rest of the car park was sealed, the areaaround the tree was prepared and the 52mm cells werelaid and clipped together there and filled with 10mmgravel. This area was of sufficient size to provide 3 carplaces on each side of the tree and a driveway in frontof the tree, while at the same time allowing rainfall toinfiltrate through the gravel into the root system.Thus we had a win-win situation. Not only was the treesaved, and money saved on not having to remove it, butthe root system of the tree was protected by the GravelCell™ system, and six extra car spaces were created.

The hotel and casino will include a luxury hotel, gaming areas, dining, and retail and convention facilities along with numerous special attractions. Rondo provided this project with all the Drywall Steel Stud Partition Systems for the podium, gaming areas and the hotel tower. Included in the plan were also specially designed and supplied maintenance WALK–ABOUT Trafficable Ceiling Systems as per the project requirements.

Rondo’s Seismic products within each system included DUO Perimeter Trim Sliding Clip (Rondo 850), KEY-LOCK TCR Seismic Joiner (Rondo 865) and Seismic plenum braces. With the KEY-LOCK Seismic Concealed Ceiling System, two-side fixed, free wall perimeter connections and Rondo 141 Wall Track (1.15BMT to suit 129 Furring Channel) was used.

Due to tight plenum space and extremely congested plenum areas, Rondo’s new Xpress Drywall Grid System was the ideal ceiling system to use. This maximised the ceiling heights in all guest rooms while offering compliant plenum vertical clearances. Contractors implemented Rondo’s intricate feature ceilings and bulkheads throughout the entire building, such areas included the lobby, restaurants and conference areas.

Contractors Precision Interior Walls and Ceilings (PIWC) primary responsibility was the installation of the specialist linings on curved feature ceilings. PIWC Construction Manager, Ashley O’Connor mentions working closely with Rondo, and using CAD drawings to create a ceiling system before the panels were even made. “We designed and ensured the ceiling systems project’s specific design criteria were met”, said Ashley.

When deciding on bicycle parking solutions for the Ovo project, Cora Bike Rack presented its range of innovative product designs that could tailored for this special project. In order to provide maximum capacity and accessibility, Cora’s E3DT-GT double tier system, E3VR vertical wall mount system and CBR bike parking rails were combined to offer the ultimate AS2890.3 compliant EOT facility.

A Tricell system was designed by SAS International to fit the "Y" shaped departure lounge at Santiago Airport. SAS International has designed, manufactured and installed metal ceiling solutions for both interior and exterior areas of the new 74,000m² terminal of the Aeropuerto de Santiago, Spain. SAS810 tricell has been installed to create a triangular aesthetic in the departure lounges. This open cell system provides a geometric form that can easily be repeated for a striking finish. The flexible approach in SAS International’s design process enabled this unique solution to fit within the ‘Y’ shaped designed departure lounge. Installed in the main terminal and baggage hall, as well as exterior ceiling areas, is the linear profile system SAS710. The linear slat ceiling, designed so that each slat lines up neatly with the next, forms a perfect row resulting in clean and simple architectural lines. SAS710 was also chosen for the exterior of the building to provide continuity of design. Using specially designed slat retaining angles, the system has been adapted for strength and durability to prevent slats from being dislodged in high wind.

No 1. Collins Wharf is the latest part of the $1.2 billion development of the Victoria Harbour precinct. The 29-level apartment complex, built by Lend Lease and designed by Architectural firm, Bates Smart was completed in September this year and boasts 321 water-lined apartments and townhouses. Expoconti were awarded the wall and ceiling contract for the $106M development and soon after contacted Rondo to supply systems for the external walls, external cladding and internal suspended ceiling system.

The Sir Edward Weary Dunlop Retirement Village has been completed with the help of architect, builder and contractor Ryman Healthcare. The 134-unit age care facility will house serviced care units and independent living units for the elderly with resort-style facilities. Rondo assisted in the development of this project, supplying a number of products including Stud and Track (64mm and 92mm x 0.55BMT), KEY-LOCK Suspended Ceiling Systems and MAXIjamb Systems for the large window and door openings leading onto balconies.

Designed by Tony Owen Partners, Breezway Altair Louvre Windows were recommended to the Developer by the Architects at Tony Owen Partners due to their visually appealing aesthetics, the products full certification and compliance with Australian Standards, and Breezway’s strong reputation in the window industry. Altair Louvres with the Stronghold System have been strategically placed on the corner of the building as a key visual feature. Being a high quality window system, Altair Louvres will provide protection from the elements and are restricted to comply with Fall Prevention requirements.