"care"

Resort-style living awaits the residents of a recently completed aged care facility on Queensland’s Gold Coast.

There were two sets of challenges involved in the Rosewood Aged Care.Firstly, waterproofing the basement. The basement was excavated around a heritage-listed building, which had to stay undamaged for the duration of the works. Piles and shotcrete were implemented for the construction, but there was no scope to install a membrane due to space and other limitations. The Markham BASE-TECT system was ideal for this situation.Second were the requirements for moisture control and permanent hygiene protection for the interior floor slabs of the residential parts of the building. This is a more routine challenge, faced by aged care facilities with concrete floor slabs. AQURON 2000 MEDI+ was selected for concrete curing enhancement and permanent hygiene sealing.

The first installation in Australasia has been completed of Boon Edam’s Circleslide architectural curved automatic sliding doors that elegantly cater to access for disability needs of modern and traditional buildings. The Circleslide installation for Mark Moran Group at Pacific Highway Warrawee on Sydney’s North Shore provides a prestigious, weather-protected entrance to a development of up-market aged care accommodation built by Next Group for Benson McCormack Architecture.  The door’s practical advantages also apply to a wide range of buildings in Australia and New Zealand, including commercial and public and private facilities, including offices, aged care, health, hospitality, restaurant, retail, tourist and transport facility uses, says Boon Edam Australia Managing Director, Michael Fisher.Circleslide installations consist of two sets of curved sliding doors – one on each of the entrance and exit sides – to provide a larger opening than traditional sliding doors, and retaining the elegant shape of revolving doors. This extra space is a major advantage for people with a disability, or those that require mobility aids. Enhanced accessibility Circleslide curved automatic sliding doors provide spacious and comfortable access for everyone using them including especially people with disability and their carers, and particularly people those with mobility issues who rely on wheelchairs, mobility scooters, wheeled walkers and other mobility devices commonly used in workplaces and public facilities. “Access to public and private facilities is an important and increasing issue for more than five million Australians and New Zealanders living with disabilities. This growing sector of the population includes the higher proportion of older people with limited mobility, including more than 750,000 Australasians who use mobility aids,” says Mr Fisher. “Where building professionals seek to provide for such people but want to retain the prestigious shape and functionality of revolving doors, Circleslide doors are an ideal solution that provides the additional capacity required,” he says. Circleslide doors complement Boon Edam’s global ranges of revolving doors, which is one of the world’s most comprehensive ranges. Their elegant design and access control functionality are preferred by architects, builders and designers for Fortune 500 companies in 27 countries. Customisable features The Circleslide door has an optional “winter mode” whereby only one sliding door opens at a time, which can reduce HVAC losses and contribute to the overall sustainability of the building. Like all Boon Edam revolving doors, Circleslide is available in a wide variety of colours and finishes, so it can be customised to the look and feel of contemporary and period buildings. The self-learning technology incorporated in the curved sliding door mechanism ensures extremely quiet and smooth movement of the doors. Options include: Interlocking modeConnection to external alarm system (e.g. fire alarm, smoke detector)Push-button free outKey impulse switchDirection sensitive motion detectorsGlass protection sheetsFloor matsAuthorised night entry·        Air curtain technology to create a barrier of air flowing from the revolving door’s canopy or sides to further extend revolving doors’ built-in advantage of excluding heat or cold to save HVAC costs through their unique always-open, always-closed configuration.  Night Locking Options include an electromechanical lock that can be unlocked with a key or by means of an optional key impulse switch.

MP Group were charged with managing the installation and finishing of all internal and external walls and this is also where Rondo offered our support. With the external structural steel framing having been installed 150mm out of position, Rondo’s Technical Services Team came to the rescue and designed an external stud wall system using our MAXIframe External Wall Framing System to ‘fill the gap,’ including design of special header bracing details to support the wall.

Construction Specialties are very proud to be associated with the prestigious new Calvary Adelaide Hospital in South Australia. The state-of-the-art hospital facility employs over 600 staff members and provides care to over 27,000 people each year.Rather than a less inviting clinical wall treatment, Acrovyn by Design® makes it easy to create an environment that feels warm and inviting, whilst still protecting your health care facility.

The Sir Edward Weary Dunlop Retirement Village has been completed with the help of architect, builder and contractor Ryman Healthcare. The 134-unit age care facility will house serviced care units and independent living units for the elderly with resort-style facilities. Rondo assisted in the development of this project, supplying a number of products including Stud and Track (64mm and 92mm x 0.55BMT), KEY-LOCK Suspended Ceiling Systems and MAXIjamb Systems for the large window and door openings leading onto balconies.

The Mark Moran Group recently opened their latest luxury retirement, aged care and wellness precinct in the exclusive Sydney suburb of Vaucluse. The complex is more reminiscent of a high-end boutique hotel than a traditional aged care facility, with its state-of- the-art gymnasium, restaurant-quality room service, luxury spa, cinema and a unique Digital Concierge service. Yet the facilities still retain a welcoming, homely feel – a combination of serenity and class, perfectly reflecting the iconic seaside suburb in which it’s located.

For more Mental Health Care products or for a customised solution, like Dhulwa Mental Health Unit, Contact Us.

Acrovyn by Design® from Construction Specialties, was specifically chosen for the new Veterinary Specialist Services (VSS) Hospital in Jindalee, Brisbane, Queensland. The overall objective of the project was to create a bright and welcoming space, as well as an extremely hygienic care environment for the veterinary doctors and staff, the patients (pets) and their owners.The combination of both functionality and design flexibility available with Acrovyn by Design® has allowed the creative “cute pet theme” to be installed behind the wash basins as splash-backs. The images used include a collection of cute animals such as kittens and puppies, which could very easily be executed with the design flexibility and functionality of Acrovyn by Design® wall panel sheets.Veterinary hospitals and lobbies are high traffic environments with a significant amount of equipment, including trolleys and stretchers that can scrape or bump against walls. In addition, they have strict cleaning requirements for high hygiene standards that often requires the use of harsh chemicals, such as bleach, to disinfect hard surfaces.The client’s mission statement is to “provide the best possible care”. To this end, they have 4 different locations around Queensland all operating a 24-hour referral and emergency animal hospital. All facilities have state-of-the-art equipment with experienced and helpful staff. The first of the four hospitals opened to the public in 2000.Acrovyn by Design® has a proven reputation as the preferred choice with many major hospital projects across Australia, including The Royal Hobart Hospital, The Memorial Hospital Adelaide, The Royal Melbourne Hospital and Adelaide’s Calvary Hospital to name a few. It is wonderful to see that the unique qualities of Acrovyn by Design® are now being recognized as suitable for use in the care of our much-loved pets undergoing veterinary care as well.Did you know that the number of Australians who are adopting or fostering pets since the COVID-19 restrictions were introduced has exploded? According to the RSPCA, many people are now adopting pets because they feel that they finally have the time to settle a new animal into their home. It is also believed that home isolation has increased the desire among many single people for a companion. The RSPCA has reported a 45% increase in dog adoptions and a 20% increase in cat adoptions since COVID19 began.Consider Acrovyn by Design® for your next project; for design flexibility, impact resistance and easy to clean maintenance in veterinary hospital environments. In addition, Acrovyn by Design® allows for fast installation when faced with tight project schedules in 24/7, critical care operating workplaces.

St George Hospital in Kogarah, Sydney, is currently undergoing a $307 million redevelopment. The centrepiece of this redevelopment is a new eight-level Acute Services Building, which will include an intensive care department, eight operating theatres, 128 additional inpatient beds and a rooftop helipad.

John Holland recently built the largest private Hospital in South Australia, adding to its already suburb health care facilities. Rondo worked alongside Contractor Brighton Australia and Architect STH Architects, to deliver this state-of-the-art facility. Rondo supported the $400m build with a range of products and systems.

his project saw a number of our systems installed including six of our EasyMech MR platforms in varying sizes, ScreentoRoof MR system, ClassicScreen Walls and our Acoustic+ screen wall system.We consulted with the team from design to install to ensure a smooth and seamless experience.For more information on our systems, contact our Customer Care Team today.

The Farr Institute in Edinburgh is a collaboration between six Scottish Universities and the NHS National Services Scotland. They aim to place the country as a global leader in health informatics research whilst improving the health of the Scottish population. 30,000 sq. ft. has been fitted out to accommodate Bio Incubator laboratories and offices together with meeting, conference and dining facilities. The remainder of the building will accommodate laboratories and offices for life science research. SAS International’s acoustic baffles were specified to meet acoustic demand and make the most of the high ceilings and breathable space. The colours, baffle layout and service integration were carefully co-ordinated to the brief. SAS130 and SAS330 were specified and installed in the central core. Both systems offer quick and easy access to otherwise hidden mechanical and electrical systems. With SAS130, tiles can be lifted out to gain access to the ceiling void. SAS330’s hinge notch allows tiles to be hung vertically from C-Profiles, providing unobstructed access to the ceiling void. Ray Kwiecinski at Michael Laird Architects gave the below quote on working with SAS International; “MLA has specified a variety of SAS International’s lay-in grid ceiling systems over the years and we have always been extremely satisfied with the finished product. At the Farr Institute however, we decided to create a feature of the structural soffits and the M&E services and, by careful coordination of these services, the steel beams… [With] the SAS Baffle System and SAS Raft System 600, we were able to create an open, collaborative and exciting office environment whilst maintaining a high degree of sound absorbency. Our Client is delighted with the results as are we.” The Institute’s independent research will support innovation in the public sector, leading to advances in preventative medicine, improvements in NHS care and better development of commercial drugs and diagnostics.

Springvale Rise Primary School engaged adventure+ to redevelop two of the school’s playgrounds. Utilising funds provided from a government election promise enabled the school to provide the best for their students. The scope included designing and installing two spectrum+ combination units and one large pinnacle+ rope climbing structure in the areas. As part of the package, adventure+ supplied and installed shade sails and undersurfacing in both play areas. Careful selection of colours ensured the playgrounds both matched with the surrounding environment and newly constructed buildings and gave an inviting and engaging atmosphere for the students. The pinnacle+ rope structure has been so successful for the school that they have to roster turns for the children! Providing the entire playground package ensured the playground redevelopment experience was as smooth as possible for the school.

The Canberra Hospital features the following RBA products:RBA8851-137 in their recently completed Bariatric Ward rooms.Canberra Hospital is the major public medical establishment based in Australia’s Capital Territory, with 672 beds to cater for the territory’s population of 550,000. The Hospital provides services including acute inpatient and day services, outpatient services, women’s and children’s services, paediatrics and pathology. Canberra Hospital is also a hub for education and research, remaining as the main teaching hospital for the Australian National University Medical School and the University of Canberra’s Nursing School. Canberra Hospital additionally accommodates for Clinical Pastoral Care institutions based in Sydney. RBA was thrilled to participate on a project that could better the experiences of both a myriad of patients and students.Canberra Hospital reached out to RBA to provide for a number of brand new Bariatric Rooms and one “Super Bariatric Room” during a refurbishment of the hospital’s orthopaedics services. These amenities are essential to providing comfortable care for individuals struggling with the growing obesity crisis, the Super Bariatric Room catering to people weighing up to half a tonne. As a result, RBA had to supply high quality, heavy duty bariatric facilities, whilst keeping a homely character to make patients comfortable in the clinical environment. Read the news article from the Canberra Times RBA’s supplication of our Bariatric Toilet, or the RBA8851-137, pictured below was vital for the project. Made of Stainless Steel, the toilet can withstand loads of up to 910 kg with no measurable deflection and 2200 kg with no permanent damage, maintaining strong and secure for its intended usage. Furthermore, the 304-type, or “Food Grade” Stainless Steel is constructed with corrosion resistance and allows for optimal hygiene. The unit supplied to Canberra Hospital has an optional P or S Trap, coming in an Enviro-Glaze® White Finish, best suited for the setting. However, this unit is also offered Enviro-Glaze® White external finish and a Stainless Steel internal finish, or a Stainless Steel total finish. Moreover, the unit is water-saving, holding a 3 Star (6.0L FF/3.0L HF/3.6L AF) WELS rating. The unit can additionally be accompanied by RBA’s Big John Bariatric Toilet Seat, or the RBA8186-853.

SAS International designed and manufactured a range of solutions for the new 75,000 square metres Terminal 2 at Dublin Airport, Ireland. According to Dublin Airport the new second terminal will be capable of comfortably handling up to 15 million passengers per year. Specification demanded that durability, ease of maintenance and acoustics were considered. SAS International worked with architects Pascall + Watson to design the ceiling solution answering the architect’s brief to factor in ongoing maintenance conducted by Facilities Management teams in the future. The design of these large sized ceiling panels required careful consideration at design stage to ensure they would be manageable when working at a height. Designed and developed specifically for Dublin Airport was 35,000 square metres of ceiling systems, installed in the main departure area, walkways and baggage handling areas. This solution looks like any other suspended metal ceiling system as it provides an aesthetically pleasing flush finish. But where this product differs is its ingenious way of allowing access to the ceiling void and services for ongoing essential maintenance. This is of particular benefit in high traffic areas such as Dublin airport as it enables a corridor to remain in use rather than having to close off the entire route. SAS International manufactured the 20,000m2 of large aluminium frames for the fabric ceilings which creates a striking central feature. Working closely with SAS International were local installers Platt and Reilly who applied the stretched fabric to the frames on-site and hoisted them into position. Creating a comfortable environment for traveller and worker was helped with the use of acoustic floating rafts and perforated metal ceiling solutions (with integrated acoustic pads) to provide the necessary acoustic control for this project. Lighting was suspended neatly between the rafts to also provide a modern finish to the corridors. In addition Perimeter heating and air handling grilles also enhance the experience.

Birmingham New Street Station was originally re-built in 1967 to accommodate 650 trains carrying 60,000 passengers per day. By 2010 it had become the busiest station outside of London, operating at more than twice its intended capacity. The first half of the refurbishment was completed in 2013. The station’s recently updated configuration should now accommodate a yearly 8.3% rise in passenger numbers. SAS International commenced work on the three-phase project in June 2012. NG Bailey and main contractor Mace installed SAS systems across the platforms, the shopping centre and the concourse. Full scale, physical mock-ups of the bespoke ceiling solutions were built on-site to ensure design intent prior to installation. The integration of fans for smoke extraction and complex wind loads had to be considered to guarantee passenger safety. The wind loads were a concern as trains passing platforms at speed can cause considerable negative loads. Bespoke ceilings comprising fixed angle bulkheads were installed in line with the curving platforms. The typically trapezoidal bulkheads were bolted end to end in order to form a faceted layout to follow these curves. Using shared data from the project’s BIM model, SAS International used a point cloud to measure the platforms and 3D model the panels. The model’s geometry revealed that the platforms were all non-uniform. This posed a significant design challenge. The data required careful analysis in order to achieve a smooth curved line within the platform edge. This was essential to provide train drivers with an unobstructed view coming into and out of the station. The SAS International design team was able to rationalise the number of unique panel types down to four. This overcame the driver visibility issue, ensured uncompromised aesthetics and brought costs within budget. Electronic Total Station setting-out techniques were then used to set out the panels along the curve.

The core function of a hospital is to attend to the physical, emotional, and mental needs of its patients. Also, the environment must be comfortable, clean, and serene to assist with a patient’s recovery. New Royal Adelaide Hospital (NRAH) is a perfect example of a state-of-the-art facility that provides a great service for city of Adelaide and surrounding regions.This 800-bed hospital is the largest hospital in South Australia. Sprawling across 25 acres, containing open green spaces throughout the precinct to assist with healing and relaxation, a commercial zone with underground car park and featuring a comprehensive range of clinical care to an estimated 85,000 inpatients and 400,000 outpatients each year.Many CS products were specified and installed in the development of the New Royal Adelaide Hospital. Our expansion joint covers were installed throughout the interior and exterior of the hospital, these expansion joint covers are critical for the development of the hospital to safely accommodate extreme building movement. An example would be the expansion joint SJHD, this seismic metal floor cover can be used in both interior and exterior settings and can provide 760mm of plus movement during a seismic event, and the expansion joint SGR is perfect for interior applications, it is hygienic and accommodates lightweight wheeled equipment, making it ideal for the NRAH. Our expansion joint covers offer a range of sizes, aesthetics, and performance variations. Each model perfectly suited for different environments.Our Acrovyn products were also installed throughout the NRAH. Acrovyn provides wall and door protection throughout the interior space of the building. In an environment like a hospital where there’s a lot of foot traffic and wheeled movement, it is imperative to have your walls protected from any potential impact. Our SCR-64N crash rail was installed throughout the hospital, mainly in the corridors to protect the walls from the bed carts. The HRB-10C, our handrail/crash rail combination is another product installed, which our ligature resistant featured component (a common feature used in behavioural health facilities) and the HRB-10C was supplied in both our Acrovyn Solid Colours and our Acrovyn Woodgrain as the handrail component. Throughout the hospital, the corners were also protected from damage by installing Acrovyn and Stainless-Steel corner guards. Both corner guards are a simple yet effective solution in protecting the vulnerable areas of the hospital. For hospital settings, Acrovyn is an environmentally friendly product, that is pleasing to the eye but also very functionable.The NRAH has been operating since 1841 and it was a privilege to have CS products featured throughout the hospital.