"bird insect and vermin control"

To protect the priceless infrastructure and mission-critical IT information in Australia’s first custom built, high-tech data centre, Polaris, Project Manager Thiess turned to the leading manufacturer of specialist building products, Construction Specialties.Integral to the $121 million construction was the regulation of airflow to safeguard the computer hardware; Construction Specialties’ customised performance louvres were the only product in Australia able to meet this construction challenge.Boasting 14,000m2 of floor space on 5 storeys with 7000m2 of raised floor over three data centre levels, the project, based in Springfield, Queensland, is the largest of its kind in Australia and will be Queensland’s only Tier 3+ data collection point.So important were the Construction Specialties performance louvres to the development, much of the building design was driven by the positioning, material specifications and design of the louvres.Lawrence Issa, Project Manager for Construction Specialties, and project partners Darryl Wright and Steve Emery of Project Sales worked closely with the Polaris construction team from project inception to completion to devise the most effective weatherproofing and airflow option for the building which also matched the intended aesthetic.“In-depth collaboration with the Polaris team led to the selection of our Architectural Line Louvres, of which two types were used – our RS7305a and LSM louvre models,” Lawrence said. “Unlike other louvres on the market, this range prevents up to 99% water penetration and maximises airflow, while also complementing the building facade as the horizontal louvre frames selected are hidden from view.“Our performance louvres cover 345m2 of the exterior building and are specifically customised in terms of size, shape and colour for the data centre,” Lawrence said.Miguel Thievent, Senior Project Engineer at Thiess, remarks that the CS Louvres perform to the highest standard, which was essential in meeting the building specifications.“It was vital we didn’t compromise on weather proofing and airflow,” Miguel said. “For example, we have six generators integral to maintaining the whole IT system in case of power failure which would not run if the airflow was affected or they were damaged by rain.“The Construction Specialties performance louvres were the only ones on the market that could guarantee damage would not occur as a result of bad weather conditions,” Miguel said.Construction Specialties’ performance louvres are at the leading edge of louvre design and are tested under real world conditions to meet the maximum standards demanded.Construction Specialties offers a broad selection of louvres under 3 main categories:Storm Resistant/Performance Louvres – The main objective of Performance Louvres is to allow the passage of air, whilst providing the area beyond the room with protection from rain penetration.Standard Louvres – A standard louvre will provide the maxiumum airflow required, but with minimal rain defence.Screening Louvres – Screening louvres, are low cost solutions that hide plant or other equipment from view.CS Louvre systems are available in a comprehensive range of finishes and colours, ensuring there is a Construction Specialties Louvre system to suit most aesthetic and performance needs.Louvre panels are factory assembled in a controlled and quality assured environment and provided to site in a fully finished modular form; thus, allowing for trouble-free and fast installation.A comprehensive range of accessories including insect/bird mesh and blanking panels in various materials and finishes is available to complete the application.

The Gateway building In Sydney’s Circular Quay is Australia’s first office tower to use fully integrated touchless 3D fingerprint scanning to allow authorised office workers and guests into the building. The building’s new entrance involves a complex integration of security and technology experts, including Boon Edam, Schindler Lifts, Honeywell and IDEMIA (the manufacturers of MorphoWave fingerprint scanning technology). The solution had to work seamlessly to enhance the user experience and building security for tenants and visitors at the 46-storey landmark building in Sydney’s CBD, owned by Dexus Wholesale Property Fund. Boon Edam delivered the entrance security solution, with Lifeline Speedlane Swing speed gates that are the slimmest in the market, which added to the aesthetics, and helped with design considerations within the width of the lift lobbies. Rising Demand by Tenants for Increased Protection The upgrade project required an entrance security system that incorporated sophisticated security yet kept an aesthetically pleasing and unobtrusive lobby. The ideal solution was found by integrating Boon Edam speed gates, MorphoWave fingerprint scanners mounted on a coordinating pedestal (the Lifeline Boost), Schindler Lift destination control and Honeywell access control technology. This was a response to increasing demands by building occupants to improve the entry security measures to better cater for the protection of employees, visitors and valuable data. A Complex, yet Perfect Orchestration Gateway’s access solution includes a bank of sleek and stylish security speed gates (Boon Edam’s Lifeline Speedlane Swing), which are seamlessly integrated with touchless and intelligent elevator destination control (Schindler Port’s PORT 4 mini) and security access via a biometric fingerprint scanning (IDEMIA’s MorphoWave) – all at one point, enabling quick, accurate and seamless entry to secured areas. These technologies are all controlled by Honeywell’s access control system. Mr Stephen Hodge, Senior Project Manager, Dexus added that “with so many stakeholders, and a strong need for reliability and quality, it was important that everyone knew the goals of the project and worked well together. I’m pleased to say that it was like a perfect jigsaw and everything came together smoothly.” “What was important to Dexus is that we were pushing the boundaries to create better experiences, but we’re only doing so with proven products. Boon Edam’s speed gates have been installed globally and locally, and this gave us added confidence that they were the right product for this forward-looking project,” he said.

At Bostik, innovation comes in many forms.Ultraset® 3 in 1 is Bostik Australia's premium timber floor adhesive incorporating Thickness Control™ Spacer Technology, a proprietary feature consisting of recycled, ground-up car tyres mixed throughout the adhesive.When applied, the Thickness Control™ Spacers act like tiny rubber pillars, suspending the timber and maintaining optimal adhesive thickness to ensure superior performance as a moisture and impact sound reduction membrane.For West Side Place, Ultraset® 3 in 1 presented significant time and cost savings vs conventional multi-layer acoustic systems by eliminating the need to install a separate moisture barrier, acoustic underlay and additional layers of adhesive. Efficiencies that flowed directly onto the construction team, supporting trades and ultimately the developer, delivering a high performance solution within budget, ahead of schedule all the while guaranteeing a compliant and comfortable environment.

The Uni of Queensland Emmanual College features the following RBA products:The 2011 Brisbane floods initiated the refurbishment of parts of University of Queensland’s Emmanuel College and created an opportunity to upgrade student amenities. The Facilities Managers decided to control water usage by using RBA’s Time-Trol shower controller. At the same time, they chose to replace out-dated twin element ‘boiler’ water heaters with instantaneous gas. The results were astonishing. “The university estimates it is now saving $60-$70K per year in water and energy savings.”The Time-Trol Shower unit allows maintenance staff to nominate run-time and lock-out parameters. These can be selected from, and changed to, any one of 12 options. No special coding required, just the flick of a dial by staff. It was ultimately decided to offer students a 5 minutes shower with a 30 second lockout. According to university staff ‘…the students have adapted to the usage restrictions seamlessly. There hasn’t been a complaint uttered…’

After nearly 100 years of serving the local community, the Petersham RSL club moved to a new home this year, in a redevelopment centred on style and comfort. Part of the design brief for the architects and developers was that the indoor spaces were comfortable for guests, particularly in reception, which can often feel the effects of wind and debris entering through open doors. The developers chose a fully automatic Tourniket revolving door from Boon Edam Australia to make a grand first impression to the classy new club, which was recently opened by Prime Minister Anthony Albanese. It is the same type of cost-effective entrance used by leading hospitality venues globally to protect patrons and workers against wind, weather, and pollution, while also controlling traffic flow and opening up new sheltered areas for productive amenities. Petersham RSL CEO, Danny Fitzgerald, said “The Boon Edam revolving door creates an impressive entrance to our modern club, and was the perfect fit for our redevelopment. With this door, Boon Edam met two key specification requirements – enhancing climate control inside the club, and enhancing personal comfort in the reception area.” A welcoming entrance The 3-wing Tourniket revolving door pictured has a height of 2,650mm and diameter of 2,800mm to allow ample room for entry and egress. It has four LED warm white downlights for a pleasant and welcoming experience. A powder coated black grey finish on the exterior of the door allows it to effortlessly blend in with the building’s overall aesthetic and design. Boon Edam Australia Managing Director Michael Fisher says that a major benefit of revolving doors is that they allow visitors and staff alike to enter into a new world inside – one that is calm, quiet, and protected against allergens and climactic extremes. “In addition to customising the door to the club’s aesthetic preferences, we worked closely with Petersham RSL to deliver the doors within a complex installation involving temporary doors while other elements of the façade and reception were completed, prior to the arrival and installation of the revolving door,” he said. Boon Edam Australia is a part of the globally leading revolving door manufacturer, Royal Boon Edam, and the door selected by the Petersham RSL is a type already used by architects, builders and specifiers for Fortune 500 companies globally and for major Australian hotels, clubs, banks, offices, legislatures, and buildings. “The teams worked well together, and the result was an outstanding front façade and entrance, which will have a long-term impact on climate control and comfort,” said Fisher. Always Open, Always Closed A key benefit of revolving door systems in addition to access control is energy conservation, with their “always open, always closed” functionality providing lower HVAC losses while increasing the temperature stability and comfort of people inside. These advantages have been proven in many of the world’s leading clubs, hospitals and hotels, where visitor comfort is paramount. “Think about how much air escapes when a sliding door opens, or how much dust, pollution, or pollen can enter the front reception area. With a revolving door, only one quadrant of air is moving around each time, providing a highly effective method of controlling the indoor climate,” said Fisher. Further economy and versatility are provided where required by night locking entrance options including electromechanical locks that can be unlocked with a key or by means of an optional key impulse switch.  “These climate control features are not always considered at the design stage, so Petersham RSL has shown great foresight by specifying these outcomes early,” added Fisher.

Currently, Quest is on an aggressive expansion drive throughout Australia, with seven projects to be completed over the next 12 months. Specifically, the freshly completed Quest on Franklin in Central Adelaide of which, Rondo has provided over 200,000l/m worth of product. Working alongside Kyren Group, Ceiling Express and Cheesman Architects, Rondo delivered frequent technical design support, as well as stock level forecasting which was imperative to control the crane lifts.

Designed by Smart Design Studio, the building is an honest layering of old and new as expressed by the raw treatment of the exterior façade through to the smooth, modern interior. The rooftop addition connects the double-height banks of glass Breezway Louvres with an articulated aluminium roof folding down as a screen to the back of the building. The end result successfully incorporates flexible and functional office interiors and a two-bedroom rooftop apartment within a rigorously controlled contemporary architecture of old and new.

7000m² of SAS310 helped Qantas Airways overcome acoustic challenges, controling reverberation time and meeting a very high acoustic performance target. Qantas Airways Limited, nicknamed ‘The Flying Kangaroo’, is Australia’s largest airline. The new headquarters is the largest property project undertaken by Qantas Airways in the last 10 years. The project aims to rejuvenate the existing campus, consolidating and upgrading four existing office buildings and joining them together with an interconnecting hub. Selected areas of the existing building floorplate have been extended into the new atrium space creating balconies and office pods. These improved physical and visual connections aim to encourage interaction and engagement between workers. With a brief for high acoustic performance, SAS International were an obvious choice for Hassell architects, due to our vast portfolio of high acoustic rated metal ceiling tiles. SAS provided 7000m² of SAS310. The acoustic challenge was to control the reverberation time in a large volume space accommodating a PA system and a very high acoustic performance target. The reverberation time was significantly reduced with the addition of absorptive material and purposed designed acoustic ceiling panels. Qantas Headquarters was constructed with longevity in mind so the durability of the tiles was key, an advantage of using metal. The finish completely meets the performance demands, is extremely functional and cost effective, an A Grade corporate campus that incorporates the latest developments in sustainability and energy efficiency.

There were two sets of challenges involved in the Rosewood Aged Care.Firstly, waterproofing the basement. The basement was excavated around a heritage-listed building, which had to stay undamaged for the duration of the works. Piles and shotcrete were implemented for the construction, but there was no scope to install a membrane due to space and other limitations. The Markham BASE-TECT system was ideal for this situation.Second were the requirements for moisture control and permanent hygiene protection for the interior floor slabs of the residential parts of the building. This is a more routine challenge, faced by aged care facilities with concrete floor slabs. AQURON 2000 MEDI+ was selected for concrete curing enhancement and permanent hygiene sealing.

Mother Teresa Catholic College, WALocation – Baldivis, Perth, Western Australia      Installation Duration - 3 monthsInstallation Year – 2019                             Project Value - $15-20 millionSpecifying Architects – Parry and Rosenthal Architects TECHNICAL DETAILInstallation Type                                             NumberService penetrations                                     150Cluster penetrations                                      11Control joints                                                   700 LMConcrete slab pours                                       Grid pattern - numerousPerimeter                                                           500 LM  BACKGROUNDMother Teresa Catholic College is a progressive co- educational facility in the fast-growing suburb of Baldivis, 60 kilometres south of Perth in the City of Rockingham.The school opened in 2013 and in 2018/19 a Stage 3 Capital Development Program called for the construction of junior-secondary class-rooms and associated facilities, playing fields, courts, grounds, and extended parking. REQUIREMENTThe College’s ongoing plans for facility enhancements represents a significant investment and is worth protecting with the most effective pre-construction termite management system.The College caters for students from pre-kindergarten to Year 12. Chemical termite controls were not an option because of toxicity issues, making a clean and environmentally safe physical termite barrier the correct solution.APPROACHA typical WA site, the college’s location is predominantly flat, with sandy soils and substrates. In general, this type of environment poses a high risk for termite attack common to this region of Western Australia. SOLUTIONThe main challenge with the installation came from the rammed earth exterior walls. Their natural composition can chip easily, so nailing or sealing the termite barrier onto the wall was not practical.Our solution was to install Termimesh cold joint /paver trays to the perimeter of the concrete slab edge. These protected the concealed entry point between the slab and wall. They also engaged into the external pavement instead of against the rammed earth wall itself.BENEFITSThe Termimesh System which comprises of our 725 grade stainless steel mesh, Termiparge bonding cement and high grade stainless steel clamps not only met their strict requirement of no chemicals it will also continue to provide them with reassurance and peace of mind the comes with our market leading Pledge Guarantee. The Pledge Guarantee provides the client with a 10 year guarantee that requires no annual inspections during that initial period. The client then has the option to extend this on an ongoing basis by having an approved annual inspection.

Imagine waking up in this 4-star luxury hotel with panoramic view of the IJ and the city of Amsterdam. Hotel Jakarta: a BREEAM Excellent certified energy-neutral hotel in Amsterdam. Designed with sustainability in mind. Unique for the Netherlands is the 30-meter-high timber structure of the hotel. All columns, ceilings and frames are made from natural, FSC or PEFC certified wood. The south and east façades are covered with 700 m2 of building-integrated solar energy panels (BIPV panels). The glass roof that covers the atrium also contains BIPV cells that, in addition to collecting energy, also function as sun blinds for the subtropical inner garden. The atrium is the center of the hotel and works as a temperature controller in both summer and winter. On each side of the building, rooms have their own covered outdoor space that functions as a structural awning. A custom made revolving door provides access to the hotel where there is a dynamic public area with various bars, restaurants, coffee corners and a wellness center. This transparent revolving door is almost 6 meters high and fits perfectly with the appearance of the facade. In addition, this type of entrance solution is in line with the sustainability requirements of the building.

London is a vibrant, busy and beautiful city, boasting constant innovation and unique architecture. Now, developments have become bigger and more competitive year on year. With expectations on office workspaces becoming increasingly more open and flexible, the requirement for integratable security has become a complex task. This led to the existing building of 10 Queen Street Place, Riverscape to have a much-needed refurbishment following the trend of open atriums, flexible floor space and usable rooftop space. Within this project, the interior and exterior were dramatically changed and enhanced utilising fresh entry and access control security solutions. Located next to Southwark Bridge and a couple minutes’ walk from the bustling area of Cannon Street Station is Riverscape. Originally opened back in 1980, the multi-storey office space was a modern development that sat on the sought-after area of the River Thames. This project was refurbed from top to bottom, with the original Boon Edam entrance solutions being upgraded to newer more innovative products. The lead architect was Aukett Swanke with interior designers Barr Gazetas leading the design of the refurbishment and, main contractors being Overbury. Working for this project years prior in relation to the old security lanes and revolving doors that were installed by Boon Edam, the London Sales team knew the building and requirements needed. It’s common to see dated installations be retrofitted with newer security products that modernise the look and feel of an entrance as well as upgrade the technology associated with them. Download the Case Study for more information about the project.

SAS International designed and manufactured a range of solutions for the new 75,000 square metres Terminal 2 at Dublin Airport, Ireland. According to Dublin Airport the new second terminal will be capable of comfortably handling up to 15 million passengers per year. Specification demanded that durability, ease of maintenance and acoustics were considered. SAS International worked with architects Pascall + Watson to design the ceiling solution answering the architect’s brief to factor in ongoing maintenance conducted by Facilities Management teams in the future. The design of these large sized ceiling panels required careful consideration at design stage to ensure they would be manageable when working at a height. Designed and developed specifically for Dublin Airport was 35,000 square metres of ceiling systems, installed in the main departure area, walkways and baggage handling areas. This solution looks like any other suspended metal ceiling system as it provides an aesthetically pleasing flush finish. But where this product differs is its ingenious way of allowing access to the ceiling void and services for ongoing essential maintenance. This is of particular benefit in high traffic areas such as Dublin airport as it enables a corridor to remain in use rather than having to close off the entire route. SAS International manufactured the 20,000m2 of large aluminium frames for the fabric ceilings which creates a striking central feature. Working closely with SAS International were local installers Platt and Reilly who applied the stretched fabric to the frames on-site and hoisted them into position. Creating a comfortable environment for traveller and worker was helped with the use of acoustic floating rafts and perforated metal ceiling solutions (with integrated acoustic pads) to provide the necessary acoustic control for this project. Lighting was suspended neatly between the rafts to also provide a modern finish to the corridors. In addition Perimeter heating and air handling grilles also enhance the experience.

Leading Australian community bank, IMB Bank, has installed a series of Boon Edam entrances, including all glass revolving doors, slimline speedgates and a swing access gate at its new building in Wollongong, NSW.IMB moved into the new building in early 2021, and immediately sought to make the entrance open and welcoming to visitors, with entrance security inside to protect valuable data, intellectual property and people.The Boon Edam technology selected is among the most stylish and efficient of the Boon Edam range used by major banks locally, Fortune 500 companies globally, and corporate HQs in 27 countries.The exterior of the building has two Boon Edam Crystal Tourniket all-glass revolving doors, which create a striking first impression. Inside, there are three Speedlane Lifeline Swing speedgates, including one wide lane suitable for disabled access. In one section, there is also a Winglock Swing access gate that separates off a designated meeting space.“After reviewing a range of product proposals, we found that Boon Edam’s range had the ideal combination of aesthetics and security that IMB was seeking,” said IMB Head of Facilities, Greg Dowd.“The security speedgates give us greater control over access to the building, and they alert us to any tailgating or access breaches. Limiting access to only authorised personnel not only protects our staff, but it also protects the data of our customers, which we always store securely,” he said.“As a further advantage, the Boon Edam team integrated the access control system with our RFID (Radio-Frequency Identification) system. This was a big help, because it meant the speedgates were sending data directly to our existing system.”Boon Edam Managing Director, Michael Fisher, says this impressive project will serve as a new benchmark for local financial institutions. “IMB has set the bar high with it’s new Wollongong facility. Every design element has been carefully thought out to be welcoming to visitors and intuitive to employees. We are delighted to have been selected to contribute to the success of this project.”“Boon Edam is a family-owned organisation with a history extending back nearly 150 years, so it is particularly satisfying to work with a community-minded company like IMB, with a similarly long and successful history,” said Mr Fisher.Responsive serviceIn addition to elegant aesthetics and intelligent security, IMB sought an entrance security partner with attentive service throughout the entire project, and then into after-sales service too.“The Boon Edam team was highly professional to work with, and responded adaptively to our needs. Early mornings were the best time for installation work, and their service team accommodated this need right from the start, without a hassle,” said Mr Dowd.“It was clear that Boon Edam takes great care in its products, and that its values as a company were aligned with IMB’s, which are strongly focused on community, family and quality.”Elegant aestheticsBoon Edam’s Speedlane Lifeline series is one of the slimmest on the market, with the cabinet housing measuring as little as 106mm. The slim nature of the speedgate makes it ideal for narrow entrances, lobbies and foyers, where sometimes an extra lane can be added due to its compact size.“The slim design and finishes of the speedgates was what attracted us to the Boon Edam product in the first place. Their overall designs are sleek, modern and in keeping with our foyer design. We could also customise the materials and colours to suit our foyer, and that really sealed the deal,” said Mr Dowd.“For the front entrance, we couldn’t look past an all-glass revolving door. It lets in an abundance of natural light, making the entire foyer a welcoming space for visitors and employees,” he said.Boon Edam’s Crystal Tourniket doors – available in single and multiple entrance options up to 3.5m diameter and height – are being introduced to Australasia after being proven internationally.The Crystal Tourniket is fully compliant with Australian Standard AS1288 (Glass in Buildings), which specifies safe glazing and installation practices when using glass in buildings.“The other Boon Edam product, the Winglock Swing, provides the ideal separation for our meeting space, without needing a full length Speedlane. It’s finishes and design also perfectly match the rest of our foyer,” said Mr Dowd.Boon Edam’s Winglock Swing is constructed from stainless steel and a single glass panel, creating an access gate that is elegant and unobtrusive in nature and design. Winglock is designed to manage bi-directional traffic with effortless ease, using smart, intuitive technology to guide each visitor through to their destination without delay or inconvenience.

About the ProjectThe ANZAC Memorial was designed as a sculptural monument, a unique collaboration between Architect Charles Bruce Dellit and sculptor George Rayner Hoff; it is arguably one of the finest examples of the union of architecture and art in Australia.The building is a striking architectural form, symmetrical on both axes. It uses elements reminiscent of traditional Gothic architecture (buttresses, cathedral windows, high ceilings) in the Art Deco style. The Memorial is adorned externally with twenty sculptures representing the units of the Australian Imperial Force (AIF). These are the sentinels of the building, keeping watch while representing the fallen to whom the building is dedicated.Bruce Dellit’s vision for the Memorial included a still pool bounded by poplars to the north of the building (included for their significant symbolic association with the battles in France and Belgium), and a cascading fountain to the south.The Hall of Service, at the centre of the Centenary Extension, is a civic space that architecturally and artistically mirrors the Hall of Silence. The Hall was named in acknowledgment of the original Memorial halls and to recognise more than a century of service by Australian servicemen and servicewomen. At the threshold to the space are the words: “NSW Service with and for All Australians”.The ChallengeWhen restoring a National War Monument visited by hundreds of thousands of people, you need to provide the highest quality results and finishes expected of such a significant structure in our history. The challenge here, comes from creating a restoration solution on a building which was designed in the early 1930’s, which will be flexible enough to maintain the architects core design features but also created and executed within a tight time frame in time for ANZAC day. The solution needed to encompass modern technology with traditional design features to ensure the restoration lasts for the next 100 years as a memorial to our fallen heroes.Tremco SolutionTremco worked closely with Sure Seal and Built to provide a solution which was both timely and high quality. the installers long standing relationship with Tremco, a number of unique solutions, together with a 20 year warranty period proved a success.Over 15,000m2 of Tremco products were installed on this historic site. Tremco provided regular iAudit reports on the job site (iAudits is a quality control measure used to ensure the products are being applied consistently to maintain warranty conditions) During regular site visits, Tremco were able to provide a high level of customised Technical information and design advice to ensure the project ran smoothly and to Built’s expectations.

Termi Home & Commercial (SA) were proud to be a part of the historic Norwood Oval Redevelopment project in Adelaide, South Australia. As one of the most iconic football grounds in Adelaide only a non chemical termite management solution would do. We designed and installed the Termimesh System keeping in mind both the historical significance and the new facilities.The suitability of the Termimesh system for this project is based on its flexibility, which was necessary due to complex external geometry of the new construction and integration with the existing buildings. This presented challenges in performing remedial work. For example the Sir Edwin Smith Grandstand is heritage listed meaning minimal work was allowed to the external façade. This is where the strength of our termite management system lies. It can be customised for each individual project. Our estimating and design team will work alongside the architect, marking up plans and explaining how the system is applied to the design. Which in the case of the Norwood Oval was extremely important. We are on hand during the construction phase to iron out any challenges that may arise ensuring the installation process is simple, smooth and straightforward.Termimesh has maintained our position as market leader in termite protection in the South Australian construction industry for over 25 years, with a strong domestic and commercial portfolio. We are one of few companies that are triple certified to AS48001, ISO9001 and ISO14001 which delivers additional peace of mind for our clients.CONSTRUCTION TEAMSchiavello ConstructionOur team has a good relationship with the lead contractor, Schiavello, having worked on past projects together. They knew our capability and after a detailed review of the construction programme, we were sure we could meet their requirements. As a supporter and sponsor of the Norwood Football Club, Schiavello recognised the significance of the project for the community.  PROJECT DETAILSClient                          City of Norwood, Payneham & St Peters. Specifying Architects                                    Tridente ArchitectsInstallation Year                                              2019Installation Duration                                      7 monthsProject Value                                                    $9 mil TECHNICAL DETAILSInstallation Type                                             NumberService penetrations                                     200Column blockouts                                          7.5 LM                 Cluster penetrations                                     4Control joints                                                   315 LMConstruction joints                                        73 LMSaw cut service penetrations                    147 LMConcrete slab pours                                      NumerousPerimeter                                                          147 LMKey Termimesh Personnel                          Drew Wilson- Account Development ManagerShane Waye, Senior EstimatorAnthony Bennett- Operations Field Manager

There is a saying that “Everything is Bigger in Texas,” and the Dallas, Texas police department is no exception. The city of Dallas is ranked in the top 10 cities in the U.S. in terms of population, at 1.2 million people. The Dallas Police Department is the ninth largest municipal police force in the U.S., based on 3,012 sworn officers. It is led by Chief of Police, U. Reneé Hall. Security a Concern When Designing HQ Building The department is located in the Jack Evans Police Headquarters building, which was built in 2003. It is 358,000 square feet, has six floors, is spread over a three-acre site, has a separate 1,200 car parking garage and a two-acre, open parking lot for additional visitor parking. Prior to 2003, the department was housed in the circa 1914 former City Hall Building. The Jack Evans Police Headquarters building was under construction when 9/11 terrorists flew airplanes into the World Trade Buildings in New York. That event was preceded by the Oklahoma City Murrah Federal Building bombing in April 1995. Therefore, security was a concern in its design. Police officials worked with a Police Design Consultant – McClaren, Wilson, and Lawrie Architects of Phoenix – to help design the building to resist a terrorist attack and isolate potential hazards. The building also needed to control visitor traffic and access. On an average month, there are 5,000 public visitors to the Jack Evans building. In addition, shots fired at police buildings nationally are not uncommon, says Paul M. Schuster, Senior Corporal/Facilities Management for the Dallas Police Department. “For the most part they are random, single shot drive-by shootings. Often, the officers are unaware that the building has been shot at, until they find a bullet hole in the brick or glass. Increasingly, police tend to be a symbol of government and some citizens see that as a visible target to lash out at. Police officers are trained to expect the routine types of calls, such as domestic violence, traffic accidents, and other crimes. Yet they must be flexible to anticipate the non-routine that can be dangerous and change in a heartbeat.” An Active Shooter Incident Led to an Increase in Security On June 13, 2015, after midnight, a 35-year-old male placed a duffle bag with a remote-controlled bomb to detonate later between cars in the parking lot of the headquarters building. The suspect then began shooting continuously at the lobby windows. Officers responded to the scene, a vehicle chase began, and the incident ended outside the city. Luckily officers in the lobby took cover and were not injured. Following that incident, the Dallas Police Department conducted a security assessment of the building and also at seven patrol stations throughout the city. The assessment included testing various construction materials for bullet resistance to various types of weapons. Gensler Architects and Guidepost Solutions, LLC developed the solutions and plans. “Yesterday we were concerned about handguns, today we are worried about rifles, and the idea of terrorism is always present with outright attack or bombs,” Schuster notes. “The police officers and police staff only want a place that is safe and where they can do their good work.” Funding of $1.3 million was approved to upgrade the lobbies of the seven patrol stations to withstand rifle rounds, and $1.9 million to improve headquarters lobby security, and to upgrade an aging security system. Turner Construction Company and Convergint Technologies, LLC conducted the renovations and security technology integration. Challenges to the Security Design The headquarter’s lobby was initially designed as a two-story glass-walled structure, with an information desk and public records service windows. Visitors were allowed free entry into the lobby and were only screened in an open area to the side if going to other floors. “The challenge in upgrading lobby security was the two-story lobby entrance glass. “In addition, there were concerns about keeping an ‘open’ and friendly service concept in mind and ensuring that the lobby would not resemble a ‘fortress’,” Schuster notes. Screening Room with Security Revolving Doors to Contain Incidents The solution was to keep the existing exterior unchanged and focus on adding a layer of security once a person enters the lobby. Visitors now enter the headquarters and immediately proceed to a side room where security screening is conducted. A new secondary wall with bullet-rated glass and solid bullet resistant wall materials was constructed inside the lobby to channel visitors to the room. Once inside the screening room, which also has bullet resistant walls, the visitor has belongings x-rayed, and they walk through a metal detector. In the event that anyone was to produce a gun and begin shooting, the incident could be contained inside that room. Once a visitor has been cleared, they proceed into the main lobby via a Boon Edam Tourlock 180 security revolving door. This automatic, four-wing door is the most advanced, security revolving door in the Boon Edam product range that offers maximum throughput, allowing users to enter and leave the building simultaneously. In the event that a large number of persons try to force their way into the facility, the Tourlock 180+90 will determine that more than one person is trying to enter and will reject the person and lock out any others from entering. Once a visitor is ready to leave the lobby and exit the building, they pass through another Boon Edam Tourlock 180+90 that leads to a vestibule with exterior swinging doors. In the event that someone tries to go back into the lobby from the front vestibule area, without going through the security screening room, the Tourlock security revolving door will reject their entry.

Being one of the largest public healthcare precincts in Australia at 160,000 m² and spread across 20 hectares of land at Birtinya north of Brisbane, we present the 750 bed Sunshine Coast University Hospital (SCUH). The SCUH has been designed for Queensland Health to be a world class health facility providing exceptional healthcare to its patients as part of Queensland Health’s vision for the future.Incorporated within this Hospital’s health precinct, this state-of-the-art facility offers numerous services for staff and patients. With all that the SCUH has to offer, it was vital that all the equipment and fittings that were required needed to be compliant, safe, practical and had an exceptional appearance. This is where the CS Group was able to provide a portfolio of products to the project that were both practical and aesthetically pleasing.All hospitals have high volumes of wheeled corridor traffic, these day-to-day movements are commonly encountered in a busy hospital. Due to this traffic, it is difficult to keep walls in their original pristine condition. To try to limit the damage that can be caused by wayward trolleys and gurneys, wall protection is put in place.Construction Specialties have supplied a portfolio of products to the SCUH to meet these needs. Starting with their corner protection for the gyprock walls, the CS Group’s VA 250N corner guard can be found throughout the Hospital in both 90 and 135 degree configurations protecting salient corners from damage. Protecting the walls from damage is CS Model SCR-48N crash rail, a 152 mm wide x 32 mm deep Acrovyn crash rail that is installed in the Hospital in both single and double runs for maximum protection. CS Model HRB-4CN Acrovyn handrail, which also acts as a high-level bump rail, completes the wall protection package.Posing a separate challenge to designers were the two Isolation Wards. Both are located within the Hospital in such a way that neither has access to an external window. Rather than have patients stare at blank walls during their stay, CS were asked if we had a solution to the problem. Our graphic imaging product, Acrovyn by Design was suggested as a possible solution and was accepted. Both wards now have a full height wall mural of a relaxing beach scene to look at rather than a typical blank white hospital wall alongside their beds.With such large footprints, each floor of the Hospital required extensive use of expansion joint covers. Construction Specialties were called on to help with the design and specification of expansion joint covers for the project. The CS Group’s SGR Model expansion joint cover was selected for the project as it is available in various widths, the Hospital being 5 floors, as well as allowing a flush mounted finish. The SGR was also chosen for its ability to accommodate wheeled traffic and meet the stringent requirements of infection control associated with a hospital project.Beautiful and practical are two words that can be used to describe the Sunshine Coast University Hospital. An amazing project featuring various CS products throughout the Hospital.

The first installation in Australasia has been completed of Boon Edam’s Circleslide architectural curved automatic sliding doors that elegantly cater to access for disability needs of modern and traditional buildings. The Circleslide installation for Mark Moran Group at Pacific Highway Warrawee on Sydney’s North Shore provides a prestigious, weather-protected entrance to a development of up-market aged care accommodation built by Next Group for Benson McCormack Architecture.  The door’s practical advantages also apply to a wide range of buildings in Australia and New Zealand, including commercial and public and private facilities, including offices, aged care, health, hospitality, restaurant, retail, tourist and transport facility uses, says Boon Edam Australia Managing Director, Michael Fisher.Circleslide installations consist of two sets of curved sliding doors – one on each of the entrance and exit sides – to provide a larger opening than traditional sliding doors, and retaining the elegant shape of revolving doors. This extra space is a major advantage for people with a disability, or those that require mobility aids. Enhanced accessibility Circleslide curved automatic sliding doors provide spacious and comfortable access for everyone using them including especially people with disability and their carers, and particularly people those with mobility issues who rely on wheelchairs, mobility scooters, wheeled walkers and other mobility devices commonly used in workplaces and public facilities. “Access to public and private facilities is an important and increasing issue for more than five million Australians and New Zealanders living with disabilities. This growing sector of the population includes the higher proportion of older people with limited mobility, including more than 750,000 Australasians who use mobility aids,” says Mr Fisher. “Where building professionals seek to provide for such people but want to retain the prestigious shape and functionality of revolving doors, Circleslide doors are an ideal solution that provides the additional capacity required,” he says. Circleslide doors complement Boon Edam’s global ranges of revolving doors, which is one of the world’s most comprehensive ranges. Their elegant design and access control functionality are preferred by architects, builders and designers for Fortune 500 companies in 27 countries. Customisable features The Circleslide door has an optional “winter mode” whereby only one sliding door opens at a time, which can reduce HVAC losses and contribute to the overall sustainability of the building. Like all Boon Edam revolving doors, Circleslide is available in a wide variety of colours and finishes, so it can be customised to the look and feel of contemporary and period buildings. The self-learning technology incorporated in the curved sliding door mechanism ensures extremely quiet and smooth movement of the doors. Options include: Interlocking modeConnection to external alarm system (e.g. fire alarm, smoke detector)Push-button free outKey impulse switchDirection sensitive motion detectorsGlass protection sheetsFloor matsAuthorised night entry·        Air curtain technology to create a barrier of air flowing from the revolving door’s canopy or sides to further extend revolving doors’ built-in advantage of excluding heat or cold to save HVAC costs through their unique always-open, always-closed configuration.  Night Locking Options include an electromechanical lock that can be unlocked with a key or by means of an optional key impulse switch.

A bold and significant new development has emerged in St Kilda as a ‘liveable Lego tower’, rising in tiered rainbow cubes that appear to balance like building blocks. Aptly named The Icon, the distinctive new building is wrapped in expanded aluminium mesh that changes colour as sunlight moves.The inspiration of artist Matthew Johnson, who worked with Jackson Clements Burrows Architects to conceptualise the distinctive complex, was achieved with Interpon Powder Coating on board as a collaborative partner.“My vision for the project was for people look up and see something interesting, to see something that is in a sense iconographic – as a marker or reference point,” explains Matthew.Interpon were involved with the project “right from the start”, explains Gareth Connell, Regional Specification, Interpon. Their association began after they were introduced to Pace Developments to discuss colour and product selection for the external façade.“We work closely with Interpon, and Pace asked us to quote with the product already powder coated,” says Ian Dunstan, southern regional sales manager at Locker Group, who manufacture perforated and expanded metal. Interpon were able to step in and develop the colour range separately, to meet the design brief and provide an ultra-durable coating system that meet the expectations of all parties.“The team at Interpon were very accommodating, engaged and professional in taking the concept on board,” says Matthew. “We were able to manifest unique colours based on the ratios I created with their chemist, inventing a whole new series of colours. This was crucial, as each level is depicted in different colour hue variations from earth to sky, which cross reference the nature of the geographical and environmental stratums. This flux of seasonal change is portrayed through subtle tonal gradation. Working with Interpon was a very fluid operation.”Interpon has collaborated on several high profile property developments and high rises over the years – although perhaps none quite as unique or with as many distinct characteristics as The Icon. “The nature of expanded aluminium mesh is such that it is formed by shearing and expanding aluminium sheet to create the ‘3D form’ effect. A visually appealing system for a façade, the shearing of the metal can present issues with very sharp edges, particularly in aggressive coastal environments,” Gareth explains.“Part of understanding this project was to comprehend as many elements as possible. Given the location was in St Kilda, with the bay just over 1.5km away, environmental considerations such as UV degradation, exposure to corrosive sea salts and prevailing winds needed to be considered.”After reviewing available data, such as Bureau of Meteorology weather patterns and local geography and topography maps, a specific duplex or two-layer powder finishing system was specified.“This consisted of a controlled preparation process for the expanded aluminium sheets. An epoxy barrier primer (was specified) to provide enhanced protection and to build the sharp edges in order to minimise issues associated with filiform corrosion. And the ultra-durability polyester powder top coat was developed in 34 distinct colours,” Gareth says.After the colour range was developed, it was applied by powder coating specialists Mansutti Bros. Lead by managing director Claude Mansutti, the team refinished hundreds of mesh panels over a period of nine months.“It was a major benefit to be using powder coating because, unlike liquid paints, powder is cured once it comes out of the oven and it’s ready to go once it’s cooled down. If they were painted, the drying phase could delay the process from refinish to installation by up to two weeks. It meant we were able to keep to a very strict schedule,” Claude says.“The project involved a lot of large spreadsheet work. There were 17 floors and over 30 colours, with panels in 15 sizes; it was quite a matrix to work with. But the end result is so different and so unique. It’s an interesting design and I’m sure it’s going to be a talking point for the area for many years.”

The new Student Center at Columbia College Chicago, located at 754 South Wabash Avenue in Chicago, opened its doors in the fall of 2019. This brand-new building offers five spectacular stories of spaces for students including music and film-screening rooms, dining options, a fitness centre, a reflection room for meditation and prayer, and event spaces for meetings, performances, and receptions. Columbia College Chicago has a closed campus. In order to enter any building on campus students and staff must have a Columbia ID or visitors must have a valid appointment. The main entrance at the Student Centre is the Tourniket manual revolving door that leads to a public foyer that includes a coffee shop and lounge. Since the speed gates are just past the security desk at the boundary of this area, they serve as a visual and physical indicator of where the public area terminates. Next to the Speedlane Open speed gates, which are notable because they do not have any closing barriers, guards watch as people pass through them to ensure that everyone is scanning their IDs and that the IDs are valid, in which case the speed gate shows a green light. In a situation where a red light shows and the gate alarms, the guard will check the person’s credentials and can try to troubleshoot the ID card. “The decision was really about what creates the least barrier to those entering and exiting the building,” said Dutil. “We don't really want our students to feel like they are overly policed or that our buildings are not accessible to them. So the design of the Open speed gates provided the best solution in terms of controlling access without being obtrusive." Swift Passage While Maintaining Accountability Before the Student Center was built, students entering any campus building would just show their ID to the security officer as they walked past. The administration realised that while this does provide some level of security, it is not foolproof – particularly when many people are entering at the same time for a class. The College’s head of security made the suggestion to install a system that would allow for swift passage of authorised people while maintaining accountability around who enters and exits the building. As anticipated, there was a brief learning curve for the students using the new system. “This was the first system like this on our campus,” said Dutil. “And the first few days that the new Centre was open were also the first few days of school. There were a lot of people new to the campus who required a bit of coaching from guards and our student staff in terms of where to place your card, and to not walk through before you place your card.” Coming Out Ahead of Swinging Doors Dutil confirms that the access systems placed at Boon Edam speed gates are actually outperforming those placed at swing doors across the campus for convenience and adoption. Across the campus, there is a card reader at every swing door entrance of a building where you present your card and a light turns red or green. But oftentimes the card reader is missed, or depending on the placement of the lights and placement of the guard, it can be kind of hit or miss with students walking right by it. “But with the Open speed gates, they're very visible and although they're not a total barrier to entry, they are something that's right in front of you. Because it's very noticable and not easily overlooked, the students have learned pretty quickly to get their ID out. In fact, this was meant to be a test run for the campus to ensure it would be viable and worthwhile for other buildings as well.” Advanced Features Add Value and Flexibility The speed gates have delivered additional benefits beyond basic campus security, according to Dutil. “One of the nice things about a system like this is that we can count visitors to the Student Centre because we get the data of everybody that scans in. So on a busy day for us it's about 2500 people throughout the day. That can range depending on what's going on and what time of year it is. On weekends we're very slow, since there are no classes – maybe 900 to 1200.” “We are a rental venue as well, so we have times where the building is open to non-Columbia College Chicago people for events or other functions. There's a really convenient touch panel right at the security desk called the BoonTouch, where the officer can turn off the turnstiles during those times and then attendees can move through freely without any alarms going off at all.” A New Revolving Door Adds Comfort and Peace of Mind Finally, the Tourniket manual revolving door delivers one additional benefit to the Student Centre, located in a city known for harsh weather. “Revolving doors are always preferred at a building like this that gets a lot of traffic going in and out. We have cold, drafty weather that blows right into our main space at that first floor entry. The revolving door helps to keep the building warm and saves energy and utility costs as well,” said Dutil. “Students feel safe and comfortable entering the building at night,” he concludes. “Our building has a lot of nooks and crannies, and someone can end up alone in a space. And so I think knowing that the only people that are in that building are the ones that are supposed to be there is helpful. Overall, our students appreciate the effort to try to keep them safer.”