"roof finishes"

Collaboration Architect: Rossi ArchitectsBuilder: M+J BuildersMaterial & ApplicationOur ECOTONE Matt and ECOTONE Sharp were applied onsite to the compressed fibre cement (CFC) soffit cladding to bring about a natural timber look aestheticOutcomeWe love our Gol Duhn with black shadow line edge finish on these soffits. It has been a pleasure to collaborate on this community hall to deliver a truly stunning space for local gatherings.

MP Group were charged with managing the installation and finishing of all internal and external walls and this is also where Rondo offered our support. With the external structural steel framing having been installed 150mm out of position, Rondo’s Technical Services Team came to the rescue and designed an external stud wall system using our MAXIframe External Wall Framing System to ‘fill the gap,’ including design of special header bracing details to support the wall.

Ferrero’s new global HQ gathers in one building with nearly 1,300 people, previously spread over five different offices. The building, with a total floor space of almost 30,000 m², opened in December 2019. The building is designed to evoke the atmosphere of an Italian square: a vast atrium is surrounded by two multi-storey office wings. Boon Edam was appointed to craft and install the golden revolving door, on behalf of facade builder Groven + Portal, who in turn worked for general contractor Felix Giorgetti. The colour of the revolving door makes a visual reference to the world-famous golden chocolate - Ferrero Rocher. The Casa Ferrero administrative building consists of two blocks built on a common basement. It was the combination of these plots, and the architectural skills, that resulted in what you see today: a building that is both impressive and elegant as well as being a pleasant and functional workplace for the employees of the food group. Ferrero’s colours are subtly incorporated into the classic facades, with bronze tones and a gilded effect over the windows as well as the entrance glass panels. This effect was achieved by applying a gold-coloured textile fabric to the laminated glass during the project’s construction. Behind the glass facade of the entrance, the most jaw-dropping area of Ferrero’s headquarters unfolds - a central atrium that connects the two blocks and is entirely covered by a glass roof. The spacious atrium is designed to function as a reception and meeting space. Horizontal circulation between the two blocks is facilitated by connecting walkways with a range of 20 meters. The vertical circulation occurs through panoramic glass elevators. The central atrium’s glass-roofed space is open to life within the company and encourages interaction between employees. This 11-storey building, including six upper levels (ground floor + 5 floors) and five lower levels, adapts perfectly to its urban surroundings. The office areas are spread over nine floors, taking advantage of maximum light for the interior space. Levels -3 to -5 include technical areas and parking spaces. Ferrero’s wish was for a functional and pleasant building for everyone who works there. We think they have achieved this in spades!

54 Mary Street is an office building nestled in the heart of Brisbane. Spanning over 22 levels, it was no small feat for bureau^proberts to carry out a retrofit of the public washrooms. As part of the refurbishment of male, female, and ADA Accessible washrooms across numerous floors, bureau^proberts had to source a large selection of soap dispensers that would be readily available in large quantities – and ideally, in a particular matte black finish. ASI JD Macdonald were perfectly positioned to provide the solution.

The Forensic Pathology & Coroner's Court is located in Lidcombe NSW. Fairview's deemed-to-satisfy non-combustible Vitracore G2 panels were chosen to achieve the unique exterior as designed by Silver Thomas Hanley and Cox Architecture, The design features vertical fins with pyramid details in five complementary finishes - Fresh Green, Pure White, Cool Grey from Fairview standard range and custom colours. Bechett and Irish Moore. Builder: Watpac NSW, Architect: Silver Thomas Hanley & Cox Architecture.

CollaborationArchitect: JPW and Marchese PartnersBuilder: EQ ConstructionsDeveloper: Aoyuan InternationalMaterial & ApplicationWe applied our specified ECOTONE Minsil to precast concrete elements onsite using swing stage access.OutcomeThe Lennox stands proudly on the riverside at the junction of the historic Lennox bridge and Church Street Parramatta. Our colour finishes work perfectly with the building and surrounds. The Lennox has gone on to win ‘Best International Project’ at the PCBC Gold Nugget Awards in San Francisco.

Designed by Woods Bagot Pty Ltd and built by Lend Lease Group, BCG manufactured curved heat strengthened laminated glass panels for the feature stair to the entry lobby of the first completed commercial tower at Barangaroo – International Towers Sydney (ITS) 2. Working closely with Woods Bagot Architects and fabricators F & D Normoyle Engineering, BCG assisted with the fine tuning of the detail design. BCG’s precision bending and laminating processes provided the quality of finish and timely supply required to ensure the successful completion of the project.

A stunning curved ceiling feature brings a refined touch to the All Souls Chapel in Rookwood, NSW. Architects WestonWilliamson+Partners designed a renovation which meets the needs of the many cultures who use the chapel at Rookwood Cemetary. White Oak battens wrap around the beautifully curved ceiling to create a warm and welcoming environment, and aluminium battens on the entrance soffit continue the linear textures externally. The carefully considered design, along with the attention to detail from installer Interfit Projects resulted in an incredible finished product.

Designed by Freadman White and built by Visioneer Builders. The exceptional level of finish and functionality is the result of a successful collaboration between architect, builder, glass manufacturer and window fabricator. Double glazing provides an ideal solution on projects where high performance glazing is required to meet the increasing standards required by the Australian Building Code Section J. Bent & Curved Glass manufactures high quality curved double-glazed units to a range of specifications. Curved glass can create a dramatic point of difference for projects where a streamlined, seamless design aesthetic is desired.

ABN Group chose a site in Leederville, WA, for a new state-of-the-art headquarters building. This included a multi-level office, ground floor commercial tenancies, end-of trip facilities, and parking for approximately 160 cars.The project demanded high standards for quality, had a construction time frame of 87 weeks, and was to be five-star Green Star rated.These considerations had an impact on the selection of finish for the car park floors, which is where MARKHAM became involved in the project.AQURON 1000 was selected for enhanced concrete curing, permanent sealing, and deep anti-dust hardening.

CollaborationArchitect and Developer: Joe Adsett ArchitectsBuilder: Tomkins CommercialPrecaster: Advanced PrecastMaterial & ApplicationOur ECOTONE team provided expert colour application of ECOTONE Minsil to grey insitu concrete and the grey concrete precast elements. This included feature curved precast channel, raked precast concrete balustrade elements, insitu form grey concrete floor slabs and entry vestibule.OutcomeBotanic was designed by award winning architect Joe Adsett and positioned directly across from the iconic New Farm Park. Our ECOTONE finishes provided an excellent blend of surface colours to match in with a natural off-white concrete fairfaced appearance.

Imagine waking up in this 4-star luxury hotel with panoramic view of the IJ and the city of Amsterdam. Hotel Jakarta: a BREEAM Excellent certified energy-neutral hotel in Amsterdam. Designed with sustainability in mind. Unique for the Netherlands is the 30-meter-high timber structure of the hotel. All columns, ceilings and frames are made from natural, FSC or PEFC certified wood. The south and east façades are covered with 700 m2 of building-integrated solar energy panels (BIPV panels). The glass roof that covers the atrium also contains BIPV cells that, in addition to collecting energy, also function as sun blinds for the subtropical inner garden. The atrium is the center of the hotel and works as a temperature controller in both summer and winter. On each side of the building, rooms have their own covered outdoor space that functions as a structural awning. A custom made revolving door provides access to the hotel where there is a dynamic public area with various bars, restaurants, coffee corners and a wellness center. This transparent revolving door is almost 6 meters high and fits perfectly with the appearance of the facade. In addition, this type of entrance solution is in line with the sustainability requirements of the building.

One New Change features SAS International bespoke metal ceiling panels with an expanded metal mesh, finished in silver, red and black. The ground-breaking, bold and perceptive £300 million One New Change mixed-use development project won the MIPIM AR Future Project Award 2010. Now complete, the building has become known as the ‘Stealth Bomber’ after the radar-proof combat plane that inspired its faceted form and has also won a RIBA 2011 Award for London and LDSA Building Excellence Award. The design incorporates pedestrian arcades converging at the core of the building, reinstating a historic north-south pedestrian route and allowing new panoramas of London’s landmark St Paul’s Cathedral. SAS International supplied the ceiling solution for the retail corridors of the development with a concealed suspension system, working closely with the architects to create a result where no visible fixings can be seen through the ceiling plane. To complement this, bespoke metal ceiling panels were produced with an expanded metal mesh, finished in silver, red and black. A challenging material to work with, to ensure the mesh held a uniform shape and corners for the panels could be formed accurately, SAS International’s solution was to create a ‘picture frame’ behind each panel. This also helped to provide support for the concealed attachment bolts. Design challenges at One New Change included the building grid size and shape (it was termed the most difficult site in Europe), the complex geometry of the structure (including some tight ceiling to structural beam heights), and a shared fire strategy between retail and office storeys. Requirements to achieve an environmentally-friendly building, complying with Part L and BREEAM ratings, were also critical and the design uses a materials palette of limestone, metal, mirror and a new method of fritted glass on the exterior to help shield the interior from glare.

SAS International designed and manufactured a range of solutions for the new 75,000 square metres Terminal 2 at Dublin Airport, Ireland. According to Dublin Airport the new second terminal will be capable of comfortably handling up to 15 million passengers per year. Specification demanded that durability, ease of maintenance and acoustics were considered. SAS International worked with architects Pascall + Watson to design the ceiling solution answering the architect’s brief to factor in ongoing maintenance conducted by Facilities Management teams in the future. The design of these large sized ceiling panels required careful consideration at design stage to ensure they would be manageable when working at a height. Designed and developed specifically for Dublin Airport was 35,000 square metres of ceiling systems, installed in the main departure area, walkways and baggage handling areas. This solution looks like any other suspended metal ceiling system as it provides an aesthetically pleasing flush finish. But where this product differs is its ingenious way of allowing access to the ceiling void and services for ongoing essential maintenance. This is of particular benefit in high traffic areas such as Dublin airport as it enables a corridor to remain in use rather than having to close off the entire route. SAS International manufactured the 20,000m2 of large aluminium frames for the fabric ceilings which creates a striking central feature. Working closely with SAS International were local installers Platt and Reilly who applied the stretched fabric to the frames on-site and hoisted them into position. Creating a comfortable environment for traveller and worker was helped with the use of acoustic floating rafts and perforated metal ceiling solutions (with integrated acoustic pads) to provide the necessary acoustic control for this project. Lighting was suspended neatly between the rafts to also provide a modern finish to the corridors. In addition Perimeter heating and air handling grilles also enhance the experience.

Collaboration Architect: PB&A ArchitectsBuilder: Ganellen ConstructionPrecaster: ConcretecDeveloper: Young & PartnersMaterial & ApplicationWe created and applied various tones of ECOTONE Matt and ECOTONE Sharp to grey brick moulded precast concrete to replicate natural brickwork. Application completed within the Concretec precast yard with final finishing onsiteOutcomeAll ECOTONE colours were customised in consultation with the client to deliver a realistic aesthetic in line with the architect’s vision.TestimonialThanks for the really great job your team have done on the project. It looks bloody fantastic.The detail and effort you have put into the brick authenticity really lifts the entire project above where even we had hoped it would be. We are extremely pleased with the result, and I hope we get to work again on a future projectPeter Allison, PB&A Architects

The Australian Parliament House features the following RBA products:B4112 – Bobrick Contura™ Surface Mounted Soap DispenserB38034 – Bobrick Paper Towel & Waste, Trimline™ series Also referred to as Capital Hill, the Australian Parliament House is the central meeting place for the Parliament of Australia. Designed to hold 5000 people when Parliament meets, the 32 hectare site is where Australia’s biggest decisions are made by agents of our citizens. RBA has consistently provided for Capital Hill during the 21st Century in a bid to provide world-class products for Australia’s representatives.Located in the heart of Canberra in the Australian Capital Territory, the Australian Parliament House was designed to better accommodate a larger number of people, meaning a greater amount of facilities for its growing occupancy. The building is designed to be spacious and not intimidating to the public, encouraging citizens to visit. Catering for Capital Hill’s requirements of security, high traffic and minimal maintenance, RBA has supplied a number of Bobrick Accessories specific to this project, suitable for both the highest of political representatives and the average citizen.RBA’s Bobrick Contura™ Surface Mounted Soap Dispenser, or the B4112, is made of strong Stainless Steel and holds a capacity of 1.2L. The unit is Antibacterial Soap resistant, allowing for its users to maintain optimal hygiene without wear and tear. Needing nominal maintenance, the B4112 is ideal for high traffic locations. Exhibiting a Satin Finish, the unit is a subtle addition to the facilities whilst simultaneously complimenting the silver notes in the Washroom design.Also pictured below is RBA’s Bobrick Trimline™ Recessed 2-in-1 Combination Unit, containing both a Paper Towel Dispenser and Waste Receptacle B38034. Recessed in nature, the unit invades minimal space while holding a large capacity of 600 C-fold of 800 multifold paper towels and a waste capacity of 14.4L, sporting two Tumbler Locks for security. It too has a Satin Finish to its Stainless Steel exterior, matching the B4112, maintaining a consistent aesthetic as well as blending in with the amenities. 

To protect the priceless infrastructure and mission-critical IT information in Australia’s first custom built, high-tech data centre, Polaris, Project Manager Thiess turned to the leading manufacturer of specialist building products, Construction Specialties.Integral to the $121 million construction was the regulation of airflow to safeguard the computer hardware; Construction Specialties’ customised performance louvres were the only product in Australia able to meet this construction challenge.Boasting 14,000m2 of floor space on 5 storeys with 7000m2 of raised floor over three data centre levels, the project, based in Springfield, Queensland, is the largest of its kind in Australia and will be Queensland’s only Tier 3+ data collection point.So important were the Construction Specialties performance louvres to the development, much of the building design was driven by the positioning, material specifications and design of the louvres.Lawrence Issa, Project Manager for Construction Specialties, and project partners Darryl Wright and Steve Emery of Project Sales worked closely with the Polaris construction team from project inception to completion to devise the most effective weatherproofing and airflow option for the building which also matched the intended aesthetic.“In-depth collaboration with the Polaris team led to the selection of our Architectural Line Louvres, of which two types were used – our RS7305a and LSM louvre models,” Lawrence said. “Unlike other louvres on the market, this range prevents up to 99% water penetration and maximises airflow, while also complementing the building facade as the horizontal louvre frames selected are hidden from view.“Our performance louvres cover 345m2 of the exterior building and are specifically customised in terms of size, shape and colour for the data centre,” Lawrence said.Miguel Thievent, Senior Project Engineer at Thiess, remarks that the CS Louvres perform to the highest standard, which was essential in meeting the building specifications.“It was vital we didn’t compromise on weather proofing and airflow,” Miguel said. “For example, we have six generators integral to maintaining the whole IT system in case of power failure which would not run if the airflow was affected or they were damaged by rain.“The Construction Specialties performance louvres were the only ones on the market that could guarantee damage would not occur as a result of bad weather conditions,” Miguel said.Construction Specialties’ performance louvres are at the leading edge of louvre design and are tested under real world conditions to meet the maximum standards demanded.Construction Specialties offers a broad selection of louvres under 3 main categories:Storm Resistant/Performance Louvres – The main objective of Performance Louvres is to allow the passage of air, whilst providing the area beyond the room with protection from rain penetration.Standard Louvres – A standard louvre will provide the maxiumum airflow required, but with minimal rain defence.Screening Louvres – Screening louvres, are low cost solutions that hide plant or other equipment from view.CS Louvre systems are available in a comprehensive range of finishes and colours, ensuring there is a Construction Specialties Louvre system to suit most aesthetic and performance needs.Louvre panels are factory assembled in a controlled and quality assured environment and provided to site in a fully finished modular form; thus, allowing for trouble-free and fast installation.A comprehensive range of accessories including insect/bird mesh and blanking panels in various materials and finishes is available to complete the application.

LOCATIONBroadbeach Waters, QueenslandCOLLABORATIONDesigned by: Smek DesignBuilder: Live BuildBRIEFPreserve and protect the concrete elements of the high-end residential homeMATERIAL & APPLICATIONECOCLEAN Concrete Sealer(Specified concrete on the project including the bar area, front fence, and garden bed)OUTCOMEThe Beverly is a stunning $7.7mil high-end residential building sitting right on the water at Broadbeach Waters QLD. It was a pleasure for our QLD team to work in such a fantastic location. Our Concrete Sealer will keep the concrete looking clean, allow water to bead off the concrete and reduce carbonation which will extend the asset life of the concrete.TESTIMONIALWorking with ECOCLEAN has been a stress-free experience. The whole process was professional and positive from start to finish. The work is perfection. The concrete-look colour stain is seamless and the sealer used for all our pre-cast concrete panels have not had any issues with water damage or staining. I would highly recommend them and would be using them for all future projects.Ryan and Guech Venville, Homeowner

Known as being positioned within one of the most popular positions within London, The River Building sits comfortably between London Bridge, St Paul’s, and Bank. The position offers enviable commutes for the city workforce, boasting a five minutes’ walk from six key tube stations. Renovated to utilise a once void entrance, The River Building is now a self-contained office space with a contemporary industrial design. The large atrium features a set of sleek black Lifeline Speedlane Swings. Stiff + Trevillion working with Blackstone Group, had specified early into the design process for the Lifeline Speedlane Swing, due to its existing specification in existing projects. The new two-story building boasts a spacious atrium that combines naked brick walling with warm feature lighting and dark tones. Mimicking the interior styling a bank of Lifeline Speedlane Swings were to be finished in black RAL. The River Building with an occupancy density of 1:8 requested comfortable yet stylish entry resulting in a wider lane width configuration. The 615mm passage width utilises two glass wings that offer fast access but give the illusion of openness.

Ivanhoe’s newest building is a landmark you can’t miss. The facade components of light bricks, dark cladding and luminous aluminium Click-on Battens perfectly complement each other, creating a contemporary finish. The interior also features our battens, which seamlessly connects to the exterior. The building comprises a three-level basement, ground floor retail outlets, two levels of offices and multiple fully appointed apartments among the two upper levels. The building is bordered on three sides by busy public roads which posed logistical challenges with its construction. However, the speed and ease of installing Click-on Battens alleviated this issue on the upper levels. The curved facade is wrapped in Sculptform aluminium Click-on Battens. They were installed upon standard and curved tracks which were delivered to site in a flexible state so that they’re able to be wrapped around the substrate and hug the exterior. Batten clips are factory fixed to the tracks at the spacing sequence that is specified. Helping to save time installing on-site. Battens are simply push-clicked onto mounting tracks that are positioned behind the battens in a concealed manner.

A Tricell system was designed by SAS International to fit the "Y" shaped departure lounge at Santiago Airport. SAS International has designed, manufactured and installed metal ceiling solutions for both interior and exterior areas of the new 74,000m² terminal of the Aeropuerto de Santiago, Spain. SAS810 tricell has been installed to create a triangular aesthetic in the departure lounges. This open cell system provides a geometric form that can easily be repeated for a striking finish. The flexible approach in SAS International’s design process enabled this unique solution to fit within the ‘Y’ shaped designed departure lounge. Installed in the main terminal and baggage hall, as well as exterior ceiling areas, is the linear profile system SAS710. The linear slat ceiling, designed so that each slat lines up neatly with the next, forms a perfect row resulting in clean and simple architectural lines. SAS710 was also chosen for the exterior of the building to provide continuity of design. Using specially designed slat retaining angles, the system has been adapted for strength and durability to prevent slats from being dislodged in high wind.

Hayward Field has always held a special place in the history and traditions of the University of Oregon, as well as for generations of athletes and fans in the state of Oregon and around the world. As the host site for the 2021 US Olympic Trials and the 2021 Track and Field World Championships, Hayward Field was primed for a 21st century “reimagining” on an epic scale.Understanding that the project’s aesthetic should extend to all areas of the venue, including the restrooms, the design team challenged ASI Group for a solution that aligned with the arena’s sophisticated design. They wanted the restrooms to offer athletes and fans the facilities necessary to maximize their experience, with an added focus on total privacy.ASI rose to the challenge, delivering 144 Alpaco™ Classic Overhead Braced Partitions, along with 36 urinal screens. A perfect blend of simplicity and function, ASI’s exclusive Ultimate Privacy™ offers zero sightline doors and pilasters that meet in a flush finish, with routed, overlapping closures to guarantee total privacy. ASI partitions are offered in a range of standard and custom colors, with crisp design lines, bold hardware options, and superior functionality that’s perfect for high-profile settings like Hayward Field. The self-closing feature of the Alpaco™ doors delivered a sleek, uniform appearance whether the facilities are in use or not.

Material & ApplicationECOTONE masonry stains applied to brickworkOutcomeThe owner completed some renovations which an extension on their home. Our ECOTONE team were contracted to colour the new brickwork to match with the existing bricks and provided an excellent finish.TestimonialI have just completed a huge extension to my home and struggled finding the exact brick to match.Fortunately, I was given Wayne Duncan's (ECOTONE) number and he set my mind at ease by saying "it will not be a problem as he will come and colour match to our house brick". I couldn't believe this was possible. I couldn’t find the actual brick colour of our home anywhere in this country. Collecting bricks with the shape, size and texture was my goal but they were every colour you could think of, people thought I was mad. I was just amazed at how Wayne and his team worked and created a masterpiece, they have done the most outstanding job but were professional, fast and worked together as a team and made this experience the most pleasurable of the build. People and tradespersons that have seen the before and after are just blown away as you cannot tell the difference. I would highly recommend ECOTONE (Wayne and his team) to anyone. THANK YOU!!!!!! J. Knight - home owner

7000m² of SAS310 helped Qantas Airways overcome acoustic challenges, controling reverberation time and meeting a very high acoustic performance target. Qantas Airways Limited, nicknamed ‘The Flying Kangaroo’, is Australia’s largest airline. The new headquarters is the largest property project undertaken by Qantas Airways in the last 10 years. The project aims to rejuvenate the existing campus, consolidating and upgrading four existing office buildings and joining them together with an interconnecting hub. Selected areas of the existing building floorplate have been extended into the new atrium space creating balconies and office pods. These improved physical and visual connections aim to encourage interaction and engagement between workers. With a brief for high acoustic performance, SAS International were an obvious choice for Hassell architects, due to our vast portfolio of high acoustic rated metal ceiling tiles. SAS provided 7000m² of SAS310. The acoustic challenge was to control the reverberation time in a large volume space accommodating a PA system and a very high acoustic performance target. The reverberation time was significantly reduced with the addition of absorptive material and purposed designed acoustic ceiling panels. Qantas Headquarters was constructed with longevity in mind so the durability of the tiles was key, an advantage of using metal. The finish completely meets the performance demands, is extremely functional and cost effective, an A Grade corporate campus that incorporates the latest developments in sustainability and energy efficiency.