Vulkem H2 Plus
Verified by manufacturer over a year ago
Low odour, low VOC, modified acrylic waterproofing membrane with microfibres.
Application
Vulkem H2 Plus can be used in areas such as:
- Showers
- Bathrooms
- Kitchens
- Laundries
- Balconies
- Other internal covered/tiled areas.
Description
Vulkem H2 Plus is a single component, rapid cure, modified acrylic waterproofing membrane, incorporating micro fibres to increase strength and wet film thickness.
- Low VOC, low odour non-trafficable waterproofing membrane.
- Tested successfully to AS 4654.1 and AS4858 ensures it meets the requirements set forth by the National Construction Code of Australia.
- Due to acrylic chemistry Vulkem H2 Plus can be used directly to stick tile application.
- Water clean-up minimises the need for solvents on-site or solvent exposure to contractors.
General information
Material | Acrylic waterproofing membrane. |
Size | 15 L (Pails). |
Uniclass | |
SpeedSpec | 07140 Wet Area Membranes 07130 Waterproofing and Tanking |
NATSPEC National Classification System | 0621 Waterproofing - Wet Areas 0411 Waterproofing – External and Tanking |
SpecPack | 07130 Waterproofing and Tanking |
Product range |
Specification data - Acrylic-based waterproof coatings
Colour | Light grey. |
Standard | To AS 4654.1 and AS 4858. Manufacturer guidanceIn accordance with the NCC for external waterproofing in Australia. Check with the manufacturer. |
Form | Single component, high solids, moisture cured. |
Cure time | 24 hours per coat. Manufacturer guidanceCure times as stated are based upon standard ambient conditions of 18 to 30°C, 50% RH. Check with the manufacturer for details. |
Sustainability data
Country of material origin | Australia |
Country of product manufacture | Australia |
Literature
Vulkem H2 Plus VOC Certificate
Tremco Waterproofing Brochure
Vulkem H2 PLUS TDS
Case studies
ANZAC Memorial
Rouse Gardens