TREMproof RT Plus
Verified by manufacturer over a year ago
Two component, acrylic modified cementitious waterproofing coating.
Application
- Used for internal tanking and waterproofing of concrete.
- Typical applications for water retaining structures, retaining walls, planter boxes, green-scapes and under-tile waterproofing.
- Suitable for water retention like OSD tanks, firewater retention tanks, etc.
Description
It is a two-component, low VOC acrylic modified cementitious coating that can be fully immersed (i.e. water tanks).
- Designed for applications where positive hydrostatic pressure resistance is required.
- Tested to AS 4654.1 – Material requirements for waterproofing membranes for external above-ground use to comply with the relevant waterproofing standard in the National Construction Code of Australia.
- Can be applied to damp/green concrete surfaces, 24 hours after the formwork has been removed, expediting the construction schedule.
- Tested to and complies with AS 4020, Testing of products for use in contact with drinking water.
General information
Material | Acrylic modified cementitious waterproofing coating. |
Uniclass | |
NATSPEC National Classification System | 0411 Waterproofing – External and Tanking 0621 Waterproofing - Wet Areas |
SpeedSpec | 07140 Wet Area Membranes 07130 Waterproofing and Tanking |
SpecPack | 07130 Waterproofing and Tanking |
Product range |
Specification data - Acrylic-based waterproof coatings
Fibre reinforcement | PermAFab.Manufacturer guidanceOptional polyester reinforcement embedded into the first wet coat of TREMproof RT Plus. Check with the manufacturer for details. |
Colour | Black. |
Standard | To AS 4654.1 and AS 4020. |
Form | Two component, cementitious coating. |
VOC content | Less than 60 g/L. |
Sustainability data
Country of material origin | Australia |
Country of product manufacture | Australia |
Literature
TREMproof RT Plus VOC Certificate
TREMproof RT Plus TDS
Tremco Waterproofing Brochure
Similar products from Tremco
Vulkem H2 Plus