Scubapoxy 5335
Verified by manufacturer over a year ago
Flexible, underwater-applied sealant.
Application
Common uses for Scubapoxy 5335 include:
- Tanks.
- Reservoirs.
- Pools.
- Piers.
- Pontoons.
- Splash zones.
- Wet Areas.
- Waste water.
- Oil/gas pipelines.
- Boats and vessels.
- Marine structures.
- Hydroelectricity.
Description
Scubapoxy 5335 is a two-pack epoxy designed as a specialist sealant for areas of movement or expansion in underwater, marine and wet-area environments. Some of its significant features include:
- Proven performance in underwater applications.
- Use for sealing or patching joints and cracks.
- Remains flexible even in cold conditions.
- Paste-like, diver-friendly formulation.
- Easy 1:1 by volume mix.
- High-build, gap-filling properties (including vertically).
- Reinforced for greater film strength and cohesion.
- Good chemical resistance, including chlorinate water.
- Good adhesion to concrete, steel, fibreglass etc.
- Not a Dangerous Good for quicker, easier shipping.
General information
Color | Other Manufacturer guidanceLight grey. |
Finish | Gloss. Guidance for specification option: Subtle orange peel texture. |
Material | Epoxy resin. |
Size | Manufacturer guidance4 litres. |
Uniclass | |
NATSPEC National Classification System | 0196 Swimming Pool Systems 0181a Adhesives and Sealants |
SpecPack | 05100 Structural Steel 03310 Concrete 13150 Swimming Pools |
SpeedSpec | 07140 Wet Area Membranes 13150 Concrete Insitu Swimming Pools |
Specification data - Epoxy resin coatings
Standard | To ASTM D-2280. |
Form | Two-pack fibre-reinforced thixotropic paste-like epoxy.Guidance for specification option: Solvent-free/ 100% solids. |
Colour | Light grey. |
Execution | Caulking gun.Gloved hand.Spatula.Trowel. |
Applied finish | Gloss. Guidance for specification option: Subtle orange peel texture. |
Solids content | 100%. |
Fully cured | 5 days. Guidance for specification option: 5 hours (dry to touch). Approximate time frames for full kit @ 25°C. |
Substrates | Concrete. Metal. Guidance for specification option: High-pressure water-blasting or abrasive blasting to class 2.4 (AS 1627.4) with a typical profile of 50-70 microns in a jagged pattern. Coated surfaces. |