NBS Source
I'm a manufacturer

Application

Common uses for Scubapoxy 3725 include:

  • Tanks.
  • Reservoirs.
  • Pools.
  • Piers.
  • Pontoons.
  • Splash zones.
  • Wet areas.
  • Waste water.
  • Oil/gas pipelines.
  • Boats and vessels.
  • Marine structures.
  • Hydroelectricity.

Description

Scubapoxy 3725 is a Kevlar®-reinforced, two-pack epoxy designed as a specialist fast-cure adhesive for underwater, marine and wet-area environments. Some of its significant features include:

  • Proven performance in underwater applications.
  • Cures hard in 5 minutes.
  • Paste-like, diver-friendly formulation.
  • Easy 1:1 by volume mix.
  • High-build, gap-filling properties (including vertically).
  • Use for patching, sealing and attaching.
  • Reinforced for greater film strength and cohesion.
  • Good overall chemical resistance.
  • Excellent adhesion to concrete, steel, fibreglass etc.
  • Not a Dangerous Good for quicker, easier shipping.


General information

Color

Other

Manufacturer guidance

Mid-grey.

Finish

Gloss.

Guidance for specification option:

Subtle orange peel texture.

Material

Epoxy resin.

Size

-

Manufacturer guidance

4 litres.

Uniclass

Pr_20_31_02_26 Epoxy resin-based adhesivesPrimary

NATSPEC National Classification System

0196 Swimming Pool Systems

0181a Adhesives and Sealants

SpecPack

05100 Structural Steel

03310 Concrete

13150 Swimming Pools

SpeedSpec

07140 Wet Area Membranes

13150 Concrete Insitu Swimming Pools

Specification data - Epoxy resin-based adhesives

Standard

To ASTM D - 2280.

Form

Two-component, fibre-reinforced, thixotropic paste-like epoxy.

Guidance for specification option:

Solvent-free/ 100% solids.

Colour

Mid-grey.

Execution

Trowel.

Spatula.

Applied finish

Gloss.

Guidance for specification option:

Subtle orange peel texture.

Solids content

100%.

Fully cured

12 hours.

Guidance for specification option:

5 minutes (dry to touch).

Approximate time frames for full kit @ 25°C.  

Substrates

Concrete.

Metal.

Guidance for specification option:

High-pressure water-blasting or abrasive blasting to class 2.4 (AS 1627.4) with a typical profile of 50-70 microns in a jagged pattern.

Coated surfaces.