• Suitable for walls, ceilings, infill panels and screens. 
• Suitable for exterior and interior application.
• Can be used for eaves lining.
• Can be installed with clips for fixing.

AUSTRALIAN STANDARDS

Published load capacity data is derived from testing in accordance with:

•       AS 4040.0 – 1992
•       AS 4040.1 – 1992
•       AS 4040.2 – 1992
•       AS 4040.3:2018

Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:

•      AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles –
•        AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions –
•        AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions –
•       AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.

Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding

Lysaght steel products comply with:

•       AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium –
•      AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements –
•       AS 1397-2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.

Easyclad® is an attractive, strong solution for both interior and exterior walling applications. Simple clips are used for fixing the start of the first sheet and subsequent sheets are nailed or screwed. Some of its significant features include:

• Easy to install.
• High-impact resistance sheets.
• Sheets can run vertically or horizontally.
• Nominal cover width at 300 mm.

Only available in NT, QLD, NSW, ACT, VIC, TAS & SA.