You are viewing content for Australia.
Choose a country to see content for your location. Changing region will navigate you to the homepage.
Compare variants
Summary
Solvent-borne intumescent coating system.
Solvent-borne intumescent coating system.
Solvent-borne intumescent coating system.
Application
Suitable as an intumescent fire protection for structural steel in interior and exterior conditions, up to Type X (EAD350402-00-1106) and C4 conditions (ISO 12944-2). Applicable for use on I-section beams, H columns, hollow sections and cellular beams. Can also be used as a repair and touch-up coating for damaged areas of freshly applied Hempacore One.
Coats by environmental classification:
Internal Structural Steel (C1–C3)
- 1st coat: Hempadur Fast Dry 17410. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
External Structural Steel (C2–C3)
- 1st coat: Hempadur Fast Dry 17410. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
External Structural Steel (C4)
- 1st coat: Hempadur Avantguard 750. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
Suitable as an intumescent fire protection for structural steel in interior and exterior conditions, up to Type X (EAD350402-00-1106) and C4 conditions (ISO 12944-2). Applicable for use on I-section beams, H columns, hollow sections and cellular beams. Can also be used as a repair and touch-up coating for damaged areas of freshly applied Hempacore One.
Coats by environmental classification:
Internal Structural Steel (C1–C3)
- 1st coat: Hempadur Fast Dry 17410. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
External Structural Steel (C2–C3)
- 1st coat: Hempadur Fast Dry 17410. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
External Structural Steel (C4)
- 1st coat: Hempadur Avantguard 750. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
Suitable as an intumescent fire protection for structural steel in interior and exterior conditions, up to Type X (EAD350402-00-1106) and C4 conditions (ISO 12944-2). Applicable for use on I-section beams, H columns, hollow sections and cellular beams. Can also be used as a repair and touch-up coating for damaged areas of freshly applied Hempacore One.
Coats by environmental classification:
Internal Structural Steel (C1–C3)
- 1st coat: Hempadur Fast Dry 17410. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
External Structural Steel (C2–C3)
- 1st coat: Hempadur Fast Dry 17410. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
External Structural Steel (C4)
- 1st coat: Hempadur Avantguard 750. DFT: 75 microns.
- 2nd coat: Hempacore One 43600. DFT: Dependant on steel loadings.
- 3rd coat: Hempathane HS 55613 Gloss or Hempathane HS 55610 Semi-Gloss. DFT: 100 microns.
Description
Hempacore One 43600 is a single component, solvent-borne intumescent coating system designed to reduce complexity in application and specification. It is applicable for a wide range of fire durations from 30 to 180 mins (optimized for 90 mins). Approved and third party certified according to EN 13381-8, BS-476 20/21, GOST 5329-5 and GB 14907:2018.
Hempacore One 43600 is a single component, solvent-borne intumescent coating system designed to reduce complexity in application and specification. It is applicable for a wide range of fire durations from 30 to 180 mins (optimized for 90 mins). Approved and third party certified according to EN 13381-8, BS-476 20/21, GOST 5329-5 and GB 14907:2018.
Hempacore One 43600 is a single component, solvent-borne intumescent coating system designed to reduce complexity in application and specification. It is applicable for a wide range of fire durations from 30 to 180 mins (optimized for 90 mins). Approved and third party certified according to EN 13381-8, BS-476 20/21, GOST 5329-5 and GB 14907:2018.
Finish
Gloss or Semi-gloss.
Gloss or Semi-gloss.
Gloss or Semi-gloss.
SKU Code
43600.
43600.
43600.
Specification
Classification data
Preparation
All surfaces to be prepared in accordance with the coating manufacturer's written instructions.
All surfaces to be prepared in accordance with the coating manufacturer's written instructions.
All surfaces to be prepared in accordance with the coating manufacturer's written instructions.
Primer coats
Hempadur Avantguard 750. DFT: 75 microns.
-
-
Undercoats
Hempacore One 43600. DFT: Dependant on steel loadings.
-
-
Finishing coats
Hempathane HS 55613 Semi-Gloss. DFT: 100 microns., Hempathane HS 55610 Gloss. DFT: 100 microns.
-
-
Execution
Applied in accordance with the coating manufacturer's written instructions.
Applied in accordance with the coating manufacturer's written instructions.
Applied in accordance with the coating manufacturer's written instructions.
Primer coats
-
Hempadur Fast Dry 17410. DFT: 75 microns.
-
Undercoats
-
Hempacore One 43600. DFT: Dependant on steel loadings.
-
Finishing coats
-
Hempathane HS 55613 Semi-Gloss. DFT: 100 microns., Hempathane HS 55610 Gloss. DFT: 100 microns.
-
Primer coats
-
-
Hempadur Fast Dry 17410. DFT: 75 microns.
Undercoats
-
-
Hempacore One 43600. DFT: Dependant on steel loadings.
Finishing coats
-
-
Hempathane HS 55613 Semi-Gloss. DFT: 100 microns., Hempathane HS 55610 Gloss. DFT: 100 microns.
Additional properties
Surface material
Steel surfaces should be free of contaminants. New build steel should be abrasive blast finished to comply with AS 1627.4 Class 2.5. Refer to Hempel's Surface Preparation Guidelines for full surface preparation requirements prior to commencement of work.
Steel surfaces should be free of contaminants. New build steel should be abrasive blast finished to comply with AS 1627.4 Class 2.5. Refer to Hempel's Surface Preparation Guidelines for full surface preparation requirements prior to commencement of work.
Steel surfaces should be free of contaminants. New build steel should be abrasive blast finished to comply with AS 1627.4 Class 2.5. Refer to Hempel's Surface Preparation Guidelines for full surface preparation requirements prior to commencement of work.
Finish
Gloss., Semi-gloss.
Gloss., Semi-gloss.
Gloss., Semi-gloss.
Volatile organic compound (VOC)
320 g/L.
320 g/L.
320 g/L.
Fire performance
To Certifire CF 5146, EN 13381-9, EN 13501-1 and UL-EU-00832-CPR.
To Certifire CF 5146, EN 13381-9, EN 13501-1 and UL-EU-00832-CPR.
To Certifire CF 5146, EN 13381-9, EN 13501-1 and UL-EU-00832-CPR.
Sustainability data
Contains Red List materials
Yes
Yes
Yes