Three-component asbestos roof coating system.

Features and benefits:

Designed to permanently fix problematic asbestos roofs.
Cost effective.
Can be applied via airless spray, roller or brush.
Forms a smooth, even and patch free finish.
Insoluble in water.
20 year manufacturer's product guarantee when installed by a Liquasil Approved Installer.
Steam cleaning using DOFF 150°C steam (Not HSE Approved). All waste must be treated as being contaminated with asbestos and must be bagged and then disposed of using a licensed disposal facility, with consignment note retained for the health and safety file. Waste water must be filtered to 5 μm to ensure that no waste water enters the mains drainage system.

Approvals:

- SWT Corrosion Primer:

Marine-grade primer
Surface and wet tolerant

- ASBESTOSEAL 20:

BBA certified.
Manufacturer recommends the use of Xylene for cleaning spraying lines after the spray application of the Asbestoseal 20 component.
Brushes and rollers are sacrificial.

- Optional Process

SWT Primer, is typically used for preventing rust break-through on metal fixings. However, it can also be used to prime the asbestos cement sheets and at the same time, arrest early delamination of the roof sheets.

The resultant aesthetic finish will be considerably enhanced, which might be important to specifiers in certain circumstances.

ASBESTOSEAL 20, Liquasil Asbestos Roof Coating System, Product Sheet 1 - Certificate: 15/5266