ROOFTRAK® IFP-AS | Solar & Plant Fixing Point for Asphalt Roofs - Integrated Fixing Point System

Vägledning för specifikationsalternativ:

Direct fixing from plate to structural substrate.

• Material: Corrosion resistant steel or stainless steel.
• Size: 30–300 mm.
• Suitable for timber, steel deck and concrete substrates.
• Very high uplift resistance values: Maximum 5 kN.
• Low profile head.
• TX25 drive.

Vägledning för specifikationsalternativ:

Packing shim designed to fit over the anchor point where multiple anchor points need to be level. Can be used in multiples to achieve greater packing dimensions. Note that a longer bolt will be required to secure them to the anchor points: care should be taken in selecting the bolt length as the anchor points are blind threaded holes.

• Material: High-density polyethylene (HDPE).
• Size: Diameter: 76 mm; thickness: 10 mm.
• Typical uses: Solar panel installations; roof walkway supports; signage supports; roof plant supports.

Vägledning för specifikationsalternativ:

Low profile fixing designed specifically for use with the IFP. Allows the use of M10 studding for where the IFP requires bolting to the structure. The rounded low profile cap nut will not damage the roofing membrane that sits over it.

• Material: A2 grade stainless steel.
• Size: Head diameter: 25 mm; shank (diameter x length): 14 x 20 mm; internal thread: M10.
• Typical uses: For using M10 studding to secure the IFP to the building structure by means of bolts or toggles.

Vägledning för specifikationsalternativ:

Standard bolt set for IFP products, comprising a pair of M10 hex bolts and washers. Suitable for bolting materials 0.5–10 mm thick (for >10 mm thickness, a longer bolt will be required).

• Material: A2 grade stainless steel.
• Bolt length: 20 mm.
• Typical uses: Unistrut and other rail systems; general bracketry.

Vägledning för specifikationsalternativ:

Connecting brackets designed for use with the IFP products. Fixing holes that allow it move to accommodate thermal expansion of the frame or support members fixed to it. For further details, including loading values, consult manufacturer.

• Material: 304 stainless steel.
• Size (l x w x t; overall): IFP-MB1: 160 x 75 x 3 mm.
• Typical uses: For securing metal framing systems or other components where thermal movement should be provided for.

Vägledning för specifikationsalternativ:

Connecting brackets designed for use with the IFP products. Fixing holes that allow it move to accommodate thermal expansion of the frame or support members fixed to it. For further details, including loading values, consult manufacturer.

• Material: 304 stainless steel.
• Size (l x w x t; overall): IFP-MB2: 63 x 75 x 3 mm).
• Typical uses: For securing metal framing systems or other components where thermal movement should be provided for.

Vägledning för specifikationsalternativ:

For use in conjunction with the IFP-CN cap nut and M10 studding to secure the IFP products to the building structure. Suitable where the underside of the roof deck is not accessible or where the roof deck does not provide adequate pullout values using screw type fixings.

• Material: Bright zinc plated (BZP) steel.
• Size: 68 x 17.5 x 15 mm.
• Typical uses: to obtain improved pullout values for situation such as fixing to composite panels and balustrade applications.

Vägledning för specifikationsalternativ:

Connecting brackets designed for use with IFP products. Fixing holes allowing it to be fixed in either axis and further adjusted to 15° either side of the chosen axis. Use in conjunction with IFP-BS bolt set.

Vägledning för specifikationsalternativ:

Connecting brackets designed for use with IFP products. Fixing holes allowing it to be fixed in either axis and further adjusted to 15° either side of the chosen axis. Use in conjunction with IFP-BS bolt set.