AquaeSEAL
Verifierad av tillverkaren för 1 månad sedan
Synthetic polymer tanking membrane.
Applikation
- Wet room installation, acting as a waterproof ‘tanking’ membrane, for floor and walls.
- All shower installations, with a tile finish to the walls.
- Bathrooms where the floor or wall are at a higher risk of water ingress due to splashing.
- Refurbishments and new build projects.
Beskrivning
AquaeSEAL RP Waterproof Sealant is a semi-solid, ‘ready to use’, and synthetic polymer tanking membrane which is applied by brush, roller or trowel. Tiles and tile adhesive are fixed directly to the surface of this fast drying, resilient and highly elastic waterproofing material. Use AquaeSEAL JST tapes when bridging joints, to create stable and secure waterproof structures.
Features and benefits:
An elastic, ready to use membrane, used to protect dry building substrates under ceramic tiles, with the following characteristics:
- Single component, solvent-free and waterproof.
- Highly elastic and flexible.
- Crack-bridging and age-resistant.
- Permeable to diffusion.
- Dries a different colour.
- Suitable for humidity load classes 0, A01 and A02 and officially approved for load class A1.
- AquaeSEAL RP prevents damage in normal loaded wet areas and wet loaded walls and floor areas, functioning as a membrane for laying ceramic tiles on moisture sensitive substrates.
Allmän information
Material | Polymer Vägledning för specifikationsalternativ: Polymer with ' semi-solid, ‘ready to use’, and synthetic polymer tanking membrane. |
Form | Formless |
Size | Vägledning för specifikationsalternativ: Supplied in standard PolyTubs, 7 kg. |
Uniclass | |
CAWS | J30/110 Cold-applied tanking M40/10 Natural stone covering M40/110 Kakelsättning M40/115 Natural stone covering M40/12 Mosaic M40/120 Mosaic M40/27 Intermediate substrate M40/470 Intermediate substrate M40/5 Kakelsättning N13/375 Shower units N13/377 Wet room showers N13/40 Shower units |
Specifikationsdata - Hartser för vätskeisolering
Klassificeringsdata | |
Composition | Synthetic polymer, single component, solvent-free. |
Coverage | 0.74 m²/kg. Vägledning för specifikationsalternativ: Single coat maximum of 9.4 m² approximately. Two coats are recommended. |
Low temperature stability | 6°C. |
Upper temperature stability | 70°C. |
Container capacity | 7 kg. Vägledning för specifikationsalternativ: Supplied in standard PolyTubs, 7 kg. |