Styccobond F48 Plus - Flooring Adhesive

Name: Styccobond F48 Plus - Flooring Adhesive
Brand: Ball, F and Co Ltd
SKU: iDP4sE36Z21BCUQvuevBFq

Verifierad av tillverkaren för 22 dagar sedan

Ball, F and Co Ltd

High Temperature Fibre-Reinforced Vinyl Adhesive

Hoppa till:

+44 (0)1538 361633 Webbplats

Applikation

STIR WELL BEFORE USE

Holding the trowel at an angle of 60°, spread the adhesive evenly over an area of subfloor that can be covered whilst the adhesive remains receptive and gives good transfer. The fast drying properties of the adhesive allow floorcoverings to be installed from as little as 5 minutes.

Following the floorcovering manufacturers laying instructions, lay the floorcovering into the adhesive and press from the centre outwards to exclude air and ensure overall contact with the adhesive. Roll with a 68kg flooring roller from end-to-end and side-to-side. Re-roll as necessary to ensure overall contact is maintained.

Where rubber sheet or tile floorcoverings are to be installed, we recommend the use of a STYCCOBOND A2 trowel. Allow the adhesive sufficient time to reach a wet, pasty and tacky consistency before placing the acclimatised

rubber floorcovering into the adhesive whilst full wet transfer of adhesive occurs.

Beskrivning

STYCCOBOND F48PLUS is a solvent free, fibre-reinforced adhesive with high resistance to both heat and PVC plasticisers and should be used for securing vinyl sheet and tile floorcoverings in areas of high solar gain such as conservatories and areas where floor to ceiling windows

are installed. STYCCOBOND F48PLUS can also be used for securing rubber floorcoverings in both sheet and tile form.

See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

STYCCOBOND F48PLUS can be applied to STOPGAP smoothing compounds, structurally sound, smooth, dry subﬂoors of concrete and sand/cement screed, calcium sulphate screeds, plywood, ﬂooring grade chipboard and hardboard.

STOPGAP waterproof surface membranes, sound ﬂooring grade asphalt and some non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate

STOPGAP smoothing compound.

STYCCOBOND F48PLUS is suitable for use over normal underﬂoor heating installations.

For details on other subfloors, contact our Technical Service Department.

Allmän information

Färg	White
ytbehandling	Trowelled
Material	Other
Form	Formless
Längd	Bespoke
Bredd	Bespoke
Höjd	Bespoke
Garantibeskrivning	Lifetime

Uniclass	Pr_20_31_02_03 Akryl- och metakrylatlimPrimär
CAWS	M50/10 Resilient floor tiling M50/110 Resilient floor tiling M50/150 Sheeting M50/20 Sheeting

SKU Code	F0048K2A
GTIN/EAN	5038464114846

Specifikationsdata - Akryl- och metakrylatlim

Klassificeringsdata
Open time (minimum)	30 minutes.
Colour	Off white.
Carrier	Solvent-free.
Coverage	4 m² per litre with either a STYCCOBOND A2 or 1.5 x 5 mm trowel.