Jämför

Siniat EI60 Shaftwall System – CH14B-19FC#212F-25G

Name: Siniat EI60 Shaftwall System – CH14B-19FC#212F-25G
Brand: Siniat
SKU: pL2xcssydqe6Co1XCsqcaC

Verifierad av tillverkaren för 3 månader sedan

Siniat

Produktcertifieringar:

EN 13501-2
Certifikattyp
CCPI System
Certifikattyp
EPD
Certifikattyp

Insulated fire protection system for protection of shafts and voids in multi-storey buildings with a rapid installation system preventing continuous routes for the spread of fire.

Hoppa till:

+44 (0)1275 377773 Webbplats

Applikation

Protection of shafts and voids in multi-storey buildings with a rapid installation system preventing continuous routes for the spread of fire.

Beskrivning

EI60 Shaftwall System with 25 mm glass mineral wool insulation, classified to EN 13501-2:2016.

Allmän information

Färg	Pink
ytbehandling	Smooth
Material	Plasterboard Steel Gypsum Glass mineral wool
Bredd	Bespoke
Höjd	Bespoke
Garantibeskrivning	Lifetime Vägledning för specifikationsalternativ: Etex Building Performance Limited offers both a comprehensive Lifetime System Warranty (excl. Aquaboard™ and Weather Defence) and External Board Warranty (Incl. Aquaboard™ - 10 Years and Weather Defence - 12 Years). For full details see the full Warranty and Proprietary Systems Policy at www.siniat.co.uk/knowledge-centre/. Etex Building Performance Limited warrants to the purchaser that the Siniat drywall systems as originally designed, built and unaltered will perform to the original laboratory performance parameters as set out in the Siniat Drywall Manual and other relevant literature as published by Siniat. The System must be constructed solely with the proprietary products and components as supplied by Siniat. The System must be installed by a professional installer in accordance with the Siniat Drywall Manual, the specification documents issued by Siniat, CAD drawings, advice and all relevant and applicable construction standards and regulations.

Uniclass	Ss_25_10_30_35 GipsskivavdelningssystemPrimär
CAWS	K10/125 Metal stud partition system K10/30 Metal stud

Product range	Shaftwall / Siniat Shaftwall

Specifikationsdata - Gipsskivavdelningssystem

Systemprestanda
Sound insulation, Rw (minimum) to BS EN ISO 10140-2 or BS EN ISO 140-3	49 Rw (dB).
Fire resistance to BS EN 1364-1 and classification to BS EN 13501-2	EI 60.
Duty rating to BS 5234-2	Severe duty (SD).
Maximum height - cold state	6700 mm.
Maximum height - fire state	4000 mm.
Thickness	171 mm.

Klassificeringsdata
System performance	All Siniat systems should be constructed to BS 8000-8:2023 'The Standard for Workmanship on construction sites - Design and installation of dry lining systems. Code of practice.'
System manufacturer	Siniat.
Framing	146 mm Siniat CH Studs CHS19146/B at 600 mm centres. 146 mm Siniat E Studs ES19146/B. Head track: 148 mm Siniat U Track Deep Flange UDT148/P. Base track: 148mm Siniat J Track JT148/B. Tillverkarens vägledning All Siniat CH-Studs and E-Studs to be a minimum 25 mm shorter than floor to ceiling height or by deflection amount, whichever is greater.
Insulation	Glass mineral wool. Vägledning för specifikationsalternativ: 25 mm thick.
Linings	Face A Plasterboard Linings - Inner Layer: 19 mm Siniat Fire Core Board. Face B Plasterboard Linings - Inner Layer: 12.5 mm Siniat Fire Board. Face B Plasterboard Linings - Outer Layer: 12.5 mm Siniat Fire Board. Tillverkarens vägledning Shaft side lining: 19 mm Siniat Fire Core Board. Corridor/room side lining: 12.5 mm Siniat Fire Board.
Fasteners	Face B Inner Layer Fixing: 25 mm Siniat Self Tapping Screws at 600 mm centres. Outer Layer Fixing: 38 mm Siniat Self Tapping Screws at 300 mm centres.
Joint treatment	Decorative. Vägledning för specifikationsalternativ: Outer layer room side boards to be taped and jointed using appropriate Siniat compounds and tape. Non-decorative. Vägledning för specifikationsalternativ: Outer layer room side boards to be taped and jointed using appropriate Siniat compounds and tape to at least first stage (bedding).
Finish	Decorative. Non-decorative.
System accessories	Siniat Flat Strap FS50/Rx. Vägledning för specifikationsalternativ: For use where partition height exceeds board height; to be fixed behind all horizontal joints to provide substrate for board fixing.
Sealing (joints and penetrations)	Siniat Intumescent Acoustic Sealant. Vägledning för specifikationsalternativ: Apply continuous beads of Siniat Intumescent Acoustic Sealant around the perimeter of the framing or to the edge of outer layers of board, ensuring that all air-paths are sealed. All penetrations should use supporting constructions detailed in the Siniat Drywall Manual unless superseded by specific test information. For combined, warrantied performance specify FSi fire-stopping products. For cPVC pipe sealing, use FSi PYROPRO® HPE Sealant in place of Siniat Intumescent Acoustic Sealant.
Standards	All products are CE marked and UKCA marked in accordance with Construction Products Regulation where relevant standards or European Technical Approvals exist. All boards to conform to BS EN 520 or alternative standard where appropriate. Metal framing components are hot-dipped galvanized steel to BS EN 10346. Metal sections rolled to BS EN 10162. Metal studs, tracks and accessories conform to BS EN 14195 where required. Drywall screws conform to BS EN 14566.
Sealer coat	Siniat Drywall Sealer.
Cavity size	126 mm.
System code	CH14B-19FC#212F-25G

Hållbarhetsdata

Materialets ursprungsland	Spain Vägledning för specifikationsalternativ: Applies to the bulk material (gypsum) only. Other components are from other countries. Consult manufacturer for details.
Produktens tillverkningsland	United Kingdom Tillverkarens vägledning UK applies to the majority of manufacture but a small percentage of finished items are imported. Contact manufacturer for details.
Material	Plasterboard Steel Gypsum Glass mineral wool
Carbon dioxide equivalent
Koldioxidekvivalent, enligt definition i BS EN 15804 Certifierad
Steg Normaliserad enhet (kg CO₂ eq/kg) Deklarerad enhet (kg CO₂ eq/unit) Steg:A1–A3 (”Produktionsskede”) Normaliserad enhet : Deklarerad enhet :- Tillverkarens vägledning Latest EPD information available from: https://www.siniat.co.uk/en-gb/documentation/
Återvinningsbarhet	Gypsum and metal components can be recycled depending on the segregation of all materials.
Återvunnet innehåll	- Tillverkarens vägledning Gypsum average 33.5% and metal average 17%.