Pendock Profiles - Casing for Services - MX Plywood Pipe Boxing. - Pipe Boxing

MX casings are primarily designed for covering and protecting larger diameter pipework, including heating services, soil and vent pipework, rainwater pipes and heat recovery ducting. All profiles are 90° angles, with radiused corners. Internal radius: 21.5 mm.

Features and benefits:

• Internal and external corners on 5 and 8 mm profiles (not bespoke).
• Butt joints.
• Stopends.
• Shadow gap joints.
• Factory-fitted edge shadow gaps (black finish for use with black screws), to provide discreet fixing location and material for scribing.
• Inner collars are available for vertical sections, for use at the head and at skirting level, or as a shadow gap joints between sections, which can be supplied in complementary finishes to enhance the column design. Inner collars are produced to suit the internal dimensions of the main casing and have a standard height of 200 mm, to show up to 150 mm.
• Profiles can be supplied with integral ventilation grilles, or grille patterns can be cut into the material on both legs of the casings, to allow the heat from pipework to flow freely into the occupancy. Grille patterns are uniformly spaced to provide a tolerance gap for cross-cutting on site. The minimum leg length for casings with grille patterns is 125 mm.
• Profiles are available in a wide range of finishes to meet virtually all service conditions for building interiors. The profiles are fixed to softwood battens, available as part of the system. When determining the size of the profile, it is important to take into account the size and positioning of the battens.
• Long runs of sections are joined together using butt joints incorporating 'push-fit' butt joint covers, or utilising a shadow gap joint.