Paxton10 Video Controller in 12V 4Amp PSU In Cabinet - Single Door Access Control Unit

About – The Paxton10 Video Controller provides processing for up to four third-party IP cameras, whilst maintaining all the functionality of the Paxton10 Door Controller. The Paxton10 Video controller includes the option for storage and is a network device that communicates over TCP/IP and can be integrated into an existing network infrastructure.

PoE powered option also available.

Installation – The wiring label on the Paxton10 Video Controller clearly shows colour coded connections for the readers, power supply, lock etc. The 12v output for the lock can be used to control any door, barrier or gate. Diagnostic LED’s indicate the status of the controller and its inputs and outputs.

Controllers are connected directly to the network via TCP/IP. They are automatically visible in the Paxton10 software under the devices menu.

Operation – Any changes made in the Paxton10 software are immediately communicated to the door or video controller. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.

The Paxton10 Video Controller combines both the Single Door Controller and a video recorder into one unit. Removing the need for any additional integration, the video controller makes installing an access control system with video recording a seamless and simple task. Two SATA hard drives can be installed simultaneously in a RAID1 configuration.

Features and benefits:

• Supplies with a 12 V, 4 amp PSU and boxed in a steel cabinet.
• Provides storage and processing for up to four third-party IP cameras, whilst maintaining all the functionality of the Paxton10 Door Controller.
• A single Paxton10 system can include up to 250 video controllers.

Power consumption:

• While battery charging - Idle - 114 mA/ 5.9 W.
• While battery charging - maximum 160 mA/ 8.3 W.
• While battery full - Idle - 74 mA/ 3.87 W.
• While battery full - maximum 122 mA/ 6.39 W.
• Backup battery - 12 V d.c., 7 Ah (optional).
• Relay rating - 30 V d.c./ 2A.
• RS485 connector output - 24 V d.c., 750 mA maximum (Paxton connectors only).
• RS485 reader output - 12 V d.c., 1 A maximum (Paxton readers only).
• Controller input voltage - 12–24 V d.c. (suppression at 28 V).
• PoE Power Supply - INPUT: 42.5–57 V d.c., 25.5 W (IEEE 802.3at Type 2) OUTPUT: 12.8 V d.c., 3.6 A.
• 4 A Power Supply - INPUT: 100-240 V a.c., 50/ 60 Hz, 1.5 A; OUTPUT: 12.8 V d.c., 4 A.