Mannok Therm Roof - MFR-DPFR PIR Insulation
Verifierad av tillverkaren för 3 månader sedan
25 mm thickness
25 mm thickness
Polyisocyanurate insulation flat roof boards.
Applikation
Flat roofs: Above metal, concrete and timber decks.
Beskrivning
Polyisocyanurate (PIR) foam insulation board for flat roofs, suitable for use in new build and refurbishment projects where the warm flat roof is covered with a hot or cold bonded, built-up bituminous waterproofing system.
Features and benefits:
- Low thermal conductivity.
- LPCB approved to LPS 1181-1.
- 'A' BRE Green Guide rating.
- Zero Ozone Depletion Potential (ODP).
- Global warming potential of <5.
- CE marked to BS EN 13165.
Allmän information
Färg | White Vägledning för specifikationsalternativ: Creamy white tissue. Yellow Vägledning för specifikationsalternativ: Core. Grey |
ytbehandling | Sandblasted |
Material | Polyisocyanurate (PIR) Foil |
Form | Rectangle |
Längd | 1200 mm |
Bredd | 600 mm |
Höjd | 30 mm 50 mm 70 mm 80 mm 100 mm |
Garantibeskrivning | Lifetime |
Uniclass | |
CAWS | J41/10 Reinforced bitumen membrane warm deck roof covering J41/430 Warm deck roof insulation |
Specifikationsdata - Polyisocyanurat (PIR)-skumplattor
Klassificeringsdata | |
Standard | To BS EN 13165, BS EN 1604, BS 476-7: Class 1 and BS EN 13501-1. |
Fire performance | F. Vägledning för specifikationsalternativ: To BS EN 13501-1: Euroclass F. |
Cross section | Uniform thickness. |
Thickness (nominal) | 25 mm. |
Face size (length x width) | 1200 x 600 mm. |
Compressive strength at 10% deformation | >140 kPa. |
Facing | Bitumen membrane. Vägledning för specifikationsalternativ: Fleece-finished, bitumen facing on one side. Glass tissue. Vägledning för specifikationsalternativ: Mineral coated perforated glass tissue facing on one side. |
Edges | Butt. |
Vapour resistivity | 300 MNs/g. Vägledning för specifikationsalternativ: Approximate core water vapour resistivity. |
Dimensional stability | DS (TH) 4. Vägledning för specifikationsalternativ: To BS EN 1604. |
ThermalConductivity | 0.026 W/mK. |
Hållbarhetsdata
Materialets ursprungsland | Ireland |
Material | Polyisocyanurate (PIR) Foil |
BIM-objekt
Detta BIM-objekt har skapats för att uppfylla kraven i
Läs mer om
| Plattform | Kompatibel | Version |
|---|---|---|
 Revit | - | 5 |
 IFC | - | 5 |
Dokumentation
Mannok Therm Roof - MFR-DPFR
Liknande produkter från Mannok Build
Mannok IsoCavity - Cavity Wall Insulation
Mannok Isoshield - Full Fill Cavity PIR Insulation
Mannok Therm Cavity - MC
Mannok Therm Floor - MF PIR Insulation
Mannok Therm Laminate-Foil - MLF PIR Insulation
Mannok Therm Laminate-Kraft - MLK PIR Insulation
Mannok Therm Roof - MFR-FFR PIR Insulation
Mannok Therm Roof - MFR-GFR PIR Insulation
Mannok Therm Roof - MFR-PLY PIR Insulation
Mannok Therm Roof - MR PIR Insulation