Jämför

ITP FlameOUT® Block Standard Flame-retardant Class B VCL Vapour Barrier (B-s1,d0) - Air and Vapour Control Layer

Name: ITP FlameOUT® Block Standard Flame-retardant Class B VCL Vapour Barrier (B-s1,d0) - Air and Vapour Control Layer
Brand: iTP
SKU: osnjTXaUpV5mqhZsgSiP1X

Verifierad av tillverkaren för 1 dag sedan

iTP

Produktcertifieringar:

CE Marking
Certifikattyp

Flame-retardant Class B (B-s1,d0) air and vapour control layer (AVCL) for use in walls and roofs. Tested to EN 13501-1, suited to high-rise 18 m+ in England & 11 m+ in Scotland.

Hoppa till:

+44 (0)1347 825200 Webbplats

Applikation

ITP FlameOUT® Block Standard Class B is suitable for use in both walls and roofs.

Storage and handling:

Handle the membrane with care.
Ensure that the membrane is not punctured or damaged.
Store the membrane horizontally away from sunlight in a cool, dry sheltered store.

Installation:

ITP FlameOUT® Block Standard Class B should be continuous over the whole plan area of the structure. All laps should be sealed with ITP FlameOUT® D/S Jointing Tape. The number of joints should be kept to a minimum by using the full width of the membrane.
The VCL should be laid loose, flat and without wrinkles, ensuring that the membrane is not creased or folded.
Cold makes the VCL become less supple. Install in temperatures over 5℃. Do not install in windy conditions.
Joins should only be made where the membrane is supported.
A continuous single row of ITP FlameOUT® D/S Jointing Tape is recommended to seal the overlaps. All joins should be firmly pressed together using a hand-held pressure roller. Tapes should not be installed in temperatures below 5℃.
Prior to covering the VCL should be thoroughly inspected to verify the integrity of the joining and sealing and to ensure that no damage has occurred during installation.
Damaged areas must be repaired using patches of ITP FlameOUT® Block Standard Class B. The patch must not extend beyond 150 mm of the damaged area. Fix with ITP FlameOUT® D/S Jointing Tape.
Where services and pipework penetrate the AVCL, use ITP FlameOUT® D/S Jointing Tape to create airtight seals around each point of entry. To avoid cutting the membrane, it is important that the membrane is folded into the corner and then reinforced by an additional protective layer of membrane.
Protect ITP FlameOUT® Block Standard from UV exposure. Cover and finish the construction of the VCL installation within a maximum of 3 months.

Overlaps:

Horizontal overlaps should be 150 mm minimum.
Vertical overlaps should be 150 mm minimum.

See installation instructions for full details.

Beskrivning

ITP FlameOUT® Block Standard Class B is a polyethylene-based vapour control layer (AVCL) with a mono-filament reinforcement scrim to provide excellent tensile strength in wall and roof insulations. ITP FlameOUT® Block Standard Class B is independently tested to British and international flame retardant standards including EN 13501-1.

When used within wall and roof installations ITP FlameOUT® Block Standard Class B prevents moisture within the building's warm air from reaching the insulation layer and forming interstitial condensation.

ITP FlameOUT® Block Standard Class B contributes to both BS 9250 for the airtightness in ‘a well-sealed ceiling’ and BS 5250 aiding the control of condensation within a roof space.

Can be used in conjunction with ITP FlameOUT® Breathe Class B Euroclass B-s1,d0 breather membrane which is installed on the cold side of the building envelope.

Features and benefits:

Euroclass B-s1,d0 Class B flame-retardant AVCL.
Independently tested to EN 13501-1.
Compliant for use in high-rise and high risk buildings.
Compliant to Approved Document B.
Suitable for roof and wall applications.
Excellent tensile strength and nail tear resistance.
Reinforcement scrim.
Available in two grades: ITP FlameOUT® Block Premium and ITP FlameOUT® Block Standard.
Suitable for use as a damp proof membrane.
CE approval.

Accessories:

ITP FlameOUT D/S jointing tape:

Double-sided tape to seal flame-retardant breather membranes and VCLs.

Size: 60 mm x 25 m.
Colour: clear.
Flame retardancy: FMVSS 302 pass.
Temp range: -20°C to +70°C.
Installation range: +10°C to +35°C.

Allmän information

Färg	White
ytbehandling	Textured
Material	Polyethylene
Form	Rectangle
Längd	50000 mm
Bredd	2000 mm

Uniclass	Pr_25_57_65_60 PlastarkPrimär
CAWS	H31/45 Air and vapour control membrane H31/261 Air and vapour control membrane H30/30 Air and vapour control membrane H30/261 Air and vapour control membrane J31/330 Air and vapour control layer J21/395 Air and vapour control layer J41/395 Air and vapour control layer J42/395 Air and vapour control layer P10/60 Air and vapour control layer P10/310 Air and vapour control layer H92/780 Air and vapour control layer

Specifikationsdata - Plastskivor

Klassificeringsdata
Material	Polyethylene.
Purpose	Vapour control layer.
Standard	To EN 13984.
Performance characteristics	-
Tensile strength (minimum)	To EN 12311-1, >500 N/50 mm.
Tear resistance	To EN 12310-1, 220 N (MD); 179 N (CD). Tillverkarens vägledning Nominal.
Elongation to break	To EN 12311-1, 16%. Tillverkarens vägledning Nominal.
Fire performance	To EN ISO 13501-1, B-s1,d0.
Form	Reinforced. Vägledning för specifikationsalternativ: Mono-filament reinforcement scrim.
Physical properties	-
Colour	White. Tillverkarens vägledning Milky white.
Weight (minimum)	140 g/m².
Dimensions	-
Width (minimum)	2 m.
Roll length (minimum)	50 m.
Roll weight	14.5 kg.
Water vapour transmission	To EN ISO 12572 (C), 28 m. Tillverkarens vägledning Nominal.
Accessories	Not required. ITP FlameOUT D/S jointing tape. Vägledning för specifikationsalternativ: Double-sided tape to seal flame-retardant breather membranes and VCLs. Size: 60 mm x 25 m. Colour: clear. Flame retardancy: FMVSS 302 pass. Temp range: -20°C to +70°C. Installation range: +10°C to +35°C.