Jämför

Housing Wall Ties - Type 4 Light Duty - Cavity Tie

Name: Housing Wall Ties - Type 4 Light Duty - Cavity Tie
Brand: Vista Engineering Ltd
SKU: 2urEjEsKkJSJopaqMrCdc8

Verifierad av tillverkaren för 7 månader sedan

VE4-200-STST (200 mm)

Vista Engineering Ltd

Produktcertifieringar:

BBA Agrément Certificate
Certifikattyp

BBA approved, stainless steel light duty wall tie used in domestic dwellings. Suitable for buildings with a maximum height of 10 m and cavity widths from 50–150 mm. (Type 4 Wall Tie)

Hoppa till:

BOS

+44 (0)1663 736700 Webbplats

Applikation

Suitable for use in domestic dwellings. Suitable for buildings with a maximum height of 10 m and cavity widths of 50–150 mm.

Beskrivning

The UK's only BBA approved stainless steel wire Type 4 housing wall tie.

For securing two leaves of a cavity wall to each other, allowing them to act as one structurally.

The VE4 comes in two styles. The first has a multi-drip in the middle of the tie, while the second has two offset double drips

placed apart. This second style is intended for walls with larger cavities ensuring the drip sits in the clear cavity. The double-drip

style is only available for the 275mm tie. Both designs allow

them to be installed in either orientation.

Features and benefits:

Incorporates a change of shape to discourage moisture moving across the tie.
Available with a dedicated clip to secure insulation (usually in sheet form) within the cavity.
Designed to be installed either way up.
Tested as Type A (sound).
Tested as Type 4 (strength) to BS EN 845-1.
BBA certified 17/5462.
UKCA certified.

Allmän information

Färg	Silver
Material	Stainless steel Vägledning för specifikationsalternativ: Grade 304.
Längd	200 mm 225 mm 250 mm 275 mm

Uniclass	Pr_20_85_84_19 HåldäcksbalkarPrimär
CAWS	F30/25 Cavity wall ties used with partial fill insulation F30/215 Cavity wall ties used with partial fill insulation F30/220 Wall ties F30/26 Wall ties F30/24 Cavity wall ties F30/214 Cavity wall ties

SKU Code	VE4

Specifikationsdata - Hålväggsankare

Klassificeringsdata
Standard	To BS EN 845-1.
Tie type	PD 6697 Type 4 (Masonry – light duty). Vägledning för specifikationsalternativ: A light-duty wall tie used in domestic dwellings. Suitable for buildings with a maximum height of 10 m and numerous cavity widths from 50 to 150 mm. Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up.
Material	Grade 304 stainless steel.
Length	200 mm. Vägledning för specifikationsalternativ: Supplied in boxes of 250 or bags of 50.
End types	Manufacturer's standard. Vägledning för specifikationsalternativ: Consult manufacturer for details.
Design embedment length (minimum)	62.5 mm.
Movement	Manufacturer's standard.
Additional requirements	-
Mortar joint thickness (minimum)	10 mm.
Resistance to water crossing cavity	Resistant (multidrip feature).
Slope tolerance	Manufacturer's standard.
Compressive load capacity	557 N.
Tensile load capacity	1256 N.
Dynamic stiffness	Type A.
Tie-mounted insulation retaining clips	ECO-clips. Vägledning för specifikationsalternativ: Universal 80 mm-diameter insulation clip made using less plastic for reduced environmental impact. Supplied in bags of 250 or 50. Not required.
Third party accreditation	BBA 17/5462; UKCA marked.
Cavity width	50–75 mm.

Hållbarhetsdata

Innehåller Red List-material	No
Produktens tillverkningsland	United Kingdom
Material	Stainless steel Vägledning för specifikationsalternativ: Grade 304.
Återvinningsbarhet	Recyclable
Återvunnet innehåll	0 %