FRED – Class A2-S1, D0 Flame Retardant paint - Flame retardant paint
Verifierad av tillverkaren för 1 månad sedan
Fire Safety Certification
Certifikattyp
Class A2-s1, d0 flame retardant intumescent paint for spray foam, PIR, timber, steel and concrete. 25 minute fire resistance to BS EN 1365-1, VOC free, brush, roller or spray applied.
Applikation
Product application:
- Purpose: Provide a Class A2-S1, D0 flame-retardant intumescent barrier to protect building materials from fire spread and heat damage.
- Substrates: Suitable for spray foam insulation, PIR insulation, timber, steel, concrete, brickwork, and other porous building surfaces.
- Typical areas of use:
- Fire protection over internal spray foam and PIR insulation.
- Timber frame constructions and structural timber components.
- Fire-protective coating for steel, concrete, and brick elements.
- Retrofit projects requiring enhanced fire performance.
Preparation:
- Ensure surfaces are clean, dry, and free from dust, grease, and loose material.
- Fill any gaps or cracks with compatible filler.
- Prime only where required, as per Fred Fire Paint application guidance.
Application method:
- Mix thoroughly before use.
- Apply by airless spray (preferred), roller, or brush.
- Minimum two coats for full fire performance, following specified coverage rates.
- Allow each coat to dry before applying the next.
Conditions:
- Ambient and substrate temperature: Minimum +5°C during application and curing.
- Protect from moisture and frost until fully cured.
Clean-up:
- Wash tools and equipment with water immediately after use.
Beskrivning
FRED is the flame retardant intumescent paint that lets you build with combustible materials safely. Achieving Class A2-s1, d0 reaction to fire, FRED expands by up to 1000 percent under heat, forming a raised char barrier that slows flame spread, limits heat release and protects the structure beneath.
Independently tested to BS EN 1365-1:2012 + corr 2013, FRED delivered 25 minutes of fire resistance on a load bearing timber frame wall carrying 8 kN per linear metre. It is the proven protection layer for spray foam insulation, PIR boards, timber and timber sheeting, steel, concrete and brickwork, with no primer needed on most surfaces.
Water based, VOC and solvent free and quick drying, FRED is applied by brush, roller or intumescent spray machine (TriTech T5 or similar) for fast coverage on residential, commercial and retrofit projects, including Passivhaus and Net Zero builds. Supplied in 10 kg tubs in orange, with white and grey available on request. FRED is designed for internal use; for external fire protection pair it with Passive Purple External, or combine with Passive Purple internally for a fire rated airtight envelope.
Product page: https://intelligentmembranes.com/products/fred-flame-retardant-paint
Fire protection solutions: https://intelligentmembranes.com/pages/fire-protection
Coverage rates: https://intelligentmembranes.com/pages/intelligent-membranes-application-coverage-rates
Watch FRED in action: https://www.youtube.com/watch?v=AepUNkBkNhI
Allmän information
Färg | Orange |
ytbehandling | Matt |
Material | Polymer |
Form | Other Formless |
Längd | Bespoke |
Bredd | Bespoke |
Höjd | Bespoke |
Garantibeskrivning | Ten year |
Uniclass | |
CAWS | M22/120 Sprayed G10/643 Protective painting B15/140 Precast concrete frame M60/195 Special coating M60/175 Protective coating M60/172 Flame-retardant coating system M60/19 Flame-retardant coatings M60/18 Special coating G10/650 Site painting B15/110 Concealed timber-framed B15/120 Exposed timber-framed |
SKU Code | IM/00FRED10 |
Specifikationsdata - Brandskyddande beläggningar
Klassificeringsdata | |
Reaction to fire rating (indicative) | To EN 1365-1, A2-s1, d0. |
Solvent | Water. |
VOC content (maximum) | VOC-free. |
Opacity | Opaque. |
Colour | Orange. |
Finish | Matt. |
Drying time | 4–24 hours. Vägledning för specifikationsalternativ: Depending on conditions; consult manufacturer for more information. |
Adhesion | >0.5 N/mm². |
Density | 1.35 kg/L (+/-0.1). |
pH | 9.0. |
Solids content | 70% (+/-2). |
Consumption (per layer applied) | 0.6–2 kg/m². |
Hållbarhetsdata
Innehåller Red List-material | No |
Materialets ursprungsland | Europe |
Produktens tillverkningsland | Europe |
Material | Polymer |
Förväntat liv | Lifetime |
BIM-objekt
Detta BIM-objekt har skapats för att uppfylla kraven i
Läs mer om
| Plattform | Kompatibel | Version |
|---|---|---|
 Revit | - | 1 |
 IFC | - | 1 |
Produktcertifieringar
Dokumentation
Typ av dokumentation
Fred - Product Sheet
Fred Install Guide
Warrington Fire Report
Liknande produkter från Intelligent Membranes
Passive Purple (VCL) and FRED (Intumescent Paint) - VCL and Fire-Rated B Liquid Applied Membrane - Air Vapour and Fire-Retardant Coating