Don & Low 116 VCL Conseal - Vapour Control Layer

Daltex® 116VCL Conseal is a high resistance vapour barrier for internal walls, ceilings and floors, designed to reduce the transfer of water vapour through the structure when placed on the warm side of the insulation. Daltex® 116VCL conseal is a Type A vapour control layer tested to EN 13984 Flexible sheets for waterproofing - Plastics and rubber vapour control layers with a conseal tape added.

Features and benefits:

• Daltex® 116VCL conseal contains 20% recycled content and conforms to the Construction Products Regulation (EU Regulation No. 305/2011 as it has effect in the United Kingdom), vapour control layers (Annex ZA of EN 13984) and is manufactured under control of an ISO 9001 quality management system.

Rolls should be stored flat on a clean, level surface and kept under cover.

Method of installation:

The vapour control layer should be installed as detailed in National Building Regulations. Any guidelines concerning installation that are supplied with the product should be consulted prior to laying. For general information – the vapour control layer should be positioned on the warm side of the thermal insulation.

In ceilings the product is placed between the underside of the rafters and the ceiling lining. In floors the product is placed on top of the structural decking or insulation (where present) and below any screed or sensitive floor coverings. Adjacent sheets should be lapped by 150 mm and sealed using the conseal tape. Minimise penetrations caused by services and seal all joints.