Bauder Bakor 790-11 Hot Melt Rubberised Bitumen
Verifierad av tillverkaren för 26 dagar sedan
EPD
Certifikattyp
CCPI System
Certifikattyp
BBA Agrément Certificate
Certifikattyp
Hot melt rubberised bitumen formulated to provide a monolithic fully bonded roofing and waterproofing membrane.
Applikation
Used as a fully bonded, monolithic waterproofing and roofing membrane on horizontal and vertical surfaces. Suitable for protected roof membrane assemblies, podium and terrace decks, planters, blue roofs, highway bridge decks, underground parking, ramps, railway bridge decks, parking decks, tunnels, reflective pools.
It is the primary waterproofing layer in the following conditions:
- Inverted Warm Roofs protected by pavers, ballast, decking.
- Decks to falls or zero falls.
- Intensive, Extensive, Brown and Biodiverse Green Roofs.
- Blue Roofs.
Must be protected by the appropriate access protection layer. Not intended for use as a permanently exposed surface without the appropriate protection layer, although will tolerate incidental foot traffic, light rubber wheeled traffic until surfacing / landscaping is installed.
Beskrivning
Hot melt, rubberized bitumen cold roof coating system, suitable for a variety of applications on both new build and refurbishment projects and can be used in cold and inverted roof scenarios. Bakor 790-11 is composed of a blend of refined bitumens, synthetic rubber and mineral stabilizers whilst also containing post-consumer recycled content. It is modified with additives to promote adhesion and improve low temperature flexibility.
Bauder Hot Melt Waterproofing application areas include protected, inverted, or buried roofs such as green roofs, paved, terraces, podiums, plazas, and car parks. Bauder Hot Melt Waterproofing System can also be specified within Bauder Blue Roof and BioSOLAR situations.
The solution is primarily used for new build projects, but it can also be used in refurbishment situations that require an inverted warm roof solution.
Only for use in a full Bauder Hot Melt Waterproofing System.
Allmän information
Färg | Black |
Material | Bitumen |
Form | Formless |
Höjd | 6 mm Vägledning för specifikationsalternativ: Nominal thickness 3mm per single layer / total 6mm with fabric reinforcement (exc. protection layer) |
Garantibeskrivning | Tillverkarens vägledningA comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information. |
Uniclass | |
CAWS | J31/47 Waterproof coating J31/353 Waterproof coating |
Specifikationsdata - Bitumenemulsion vattentäta beläggningar
Klassificeringsdata | |
Third-party certification | BBA Certificate: Roofing System - BBA 06/4350 Product Sheet 6 Damp Proofing System - BBA 06/4350 Product Sheet 5. BRE Green Guide: A-D (depending on substrate). |
Colour | Black. |
Solids content | 100%. |
Weathertightness | The system will resist the passage of moisture into a building (BBA 06/4350 Section 6-PS6). |
Vindmotstånd | The system will resist the effects of any likely wind suction acting on the roof. |
Durability | Under normal service conditions the system will remain waterproof for the design life of the roof in which it is incorporated. (BBA 06/4350 Section 12-PS6). |
Reaktion på brand | Unrestricted with stone, screed or paving cover as European Commission Directive 2000/553/EC. (BBA 06/4350 Section 10-PS6). |
Impact resistance | The system will accept, without damage, the limited foot traffic and loads associated with the installation and maintenance, and the effects of thermal or other minor movements likely to occur in practice. (BBA 06/4350 Section 9-PS6). |
Root protection | The system will resist root penetration from green roof and roof garden systems. (BBA 06/4350 Section 10-PS6). |
Coverage | Nominal Weight 6.5 kg/m² in two layers (exc. protection layer). |
Water absorption | Gain 0.10g. |
Chemical resistance | Resistant to: water, calcium chloride, salt, mild acid and alkaline solutions. Non-resistant to oil, grease or solvents. |
Crack bridging | No cracking, no splitting, no loss of adhesion. |
Flash point | 291°C. |
Rate of application | Nominal thickness 3 mm per single layer/ total 6mm with fabric reinforcement (exc. protection layer). |
HeatingTemperatureDelta | 180-200°C. |
Setting time | Immediate on cooling. |
Hållbarhetsdata
Tydlighet för koldioxidsnål design
NBS LCA hjälper byggproffs att mäta miljöpåverkan och identifiera produkter med låga koldioxidutsläpp för mer hållbara projekt.
Produktens tillverkningsland | Canada |
Material | Bitumen |
| Carbon dioxide equivalent | |
Koldioxidekvivalent, enligt definition i BS EN 15804 Certifierad | |
Steg Normaliserad enhet (kg CO₂ eq/kg) Deklarerad enhet (kg CO₂ eq/m²) Steg:A1–A3 (”Produktionsskede”) Normaliserad enhet : Deklarerad enhet :720 Tillverkarens vägledningPlease refer to EPD. | |
Produktcertifieringar
Produktcertifieringar
Dokumentation
Typ av dokumentation
New Build Flat Roof Solutions - Bauder brochure
Bauder waterproofing systems are now CCPI verified.
Hot Melt Structural Waterproofing - Bauder brochure
Bauder Bakor 790-11 Hot Melt Rubberised Bitumen - Technical Data Sheet
Nyheter
150 Cheapside
Marischal Square
National Innovation Centre for Ageing and Data Science (NICAD)
Belvedere Court
Wadham College