NBS Source
Jag är en tillverkare
Jämför varianter

A1400 Telescopic Automatic Sliding Door Operator - Telescopic Sliding Door Operator

Verifierad av tillverkaren för 1 månad sedan

Single

FAAC Entrance Solutions UK Variant:
Produktcertifieringar:
  • ADSA

    ADSA

    Certifikattyp

  • UKAS

    UKAS

    Certifikattyp

Automatic telescopic sliding door operator, single direction opening (two door leaves) or bi-parting (four door leaves).

Hoppa till:
BOS
+44 (0)333 006 3443 Webbplats

Applikation

Automatic sliding door operator for single or double door.

Beskrivning

Automatic telescopic sliding door operator, single direction opening (two door leaves) or bi-parting (four door leaves).

Features and benefits:

  • Available as a single-direction two-door door system or a bi-parting four-door door system.
  • Opening width: 1100–3000 mm (single); 1400–4000 mm (double).
  • Supports door leaves up to 110 kg each (single) and up to 60 kg each (double).
  • Left-hand or right-hand opening (single) and bi-parting (double).
  • System including normal installation to comply with BS 7036-0:2014 and BS EN 16005:2012.
  • Monitored emergency escape opening and threshold presence detection safety system, with 24 V d.c. E1/2SL monitored battery pack.
  • Exclusive intelligent energy saving function eliminates cross traffic opening, optimizing opening widths and hold open times.
  • To permit safe passage between closing doors, the doors go into reverse mode if an obstruction is detected, and then start moving again slowly to check if the obstruction has cleared.
  • Automatic adjustments: Determination of opening and closing positions. Selection of ideal speed, acceleration and deceleration. Protection sensor monitoring. 
  • Standard one year warranty (can be extended subject to quotation).

Manufacturer’s Declaration of Conformity

Applied harmonised standards: EN 60335-2-103:2015, EN ISO 13849-1:2015 PL “c” CAT.3, EN ISO 13849-2:2012, EN ISO 12100:2010 and EN 16005

Allmän information

Färg

Silver

Bronze

Other

ytbehandling

Anodized

Powder-coated

Form

Rectangle

Längd

234 mm

Bredd

101 mm

Garanti­beskrivning

One year

Uniclass

Pr_30_36_36_23 Dörrspår och löpande utrustningPrimär

CAWS

L20/490 Automatic doors

P21/10 Door track and running gear

P21/350 Door track and running gear

Specifikationsdata - Dörrskenor och löpverk

Klassificeringsdata

Standard

Tested to EN 60335-1, EN 60335-2, EN 61000-6-2, EN 61000-6-3, EN ISO 13849-1, EN ISO 13849-2, EN ISO 12100 and EN 16005.

Classification grades (minimum)

-

Durability

Manufacturer's standard.

Door mass

4.

Vägledning för specifikationsalternativ:

Up to 110 kg per door leaf (two in total).

Corrosion resistance

Manufacturer's standard.

Category of door-opening action

1.

Initial friction

Manufacturer's standard.

Form

Silver anodized top track with Energy Saving function.
Bronze anodized top track with Energy Saving function.
FAAC powder coat finish top track with Energy Saving function.

Vägledning för specifikationsalternativ:

Consult manufacturer for options and insert colour requirements (RAL).

Tillverkarens vägledning

Consult manufacturer for full details.

Integral accessories

None.
Morning entry switch.

Tillverkarens vägledning

See also Locking mechanism and Activation for further options.

Locking mechanism

Fail safe.
Fail secure.
Bi-stable.
Not required.

Dimensioner

Opening width: 1100–3000 mm.
101 mm thick; 234 mm deep.

Activation

Combined uni-directional and threshold presence detection entry/exit activator.
Elbow push pads for entry/exit.
Access control for entry and elbow push pad for exit.
Contactless activation for entry/exit.

Configuration

Left-hand opening.
Right-hand opening.

Mode of operation

Digital FAAC SDK EVO multi-mode selector and configurator tool.
Digital FAAC LK EVO with LED diagnostic and six-mode selector.
Illuminated key switch FAAC EVO with five-mode selector.

Safety

Sidelight - monitored presence detection.

Hållbarhetsdata

Produktens tillverkningsland

United Kingdom

BIM-objekt

BOS

NBS BIM-objektstandard

Detta BIM-objekt har skapats för att uppfylla kraven i NBS BIM-objektstandarden.

Läs mer om NBS BIM-objektstandarden.

PlattformKompatibelVersion
Revit
-

1

IFC
-

1

Produktcertifieringar

ADSA

ADSA

ADSA 16005

UKAS

UKAS

ISO9001

Dokumentation

FAAC A1400 Automatic Sliding Door Range

FAAC A1400 Automatic Sliding Door Range

FAAC A1400 TK35 Door Profiles

FAAC A1400 TK35 Door Profiles

CPD-material

ABC of automatic doors- Access & Equality, Benefits and Considerations.

ABC of automatic doors- Access & Equality, Benefits and Considerations.

Nyheter

Currys

Currys

EDF Offices

EDF Offices

Liknande produkter från FAAC Entrance Solutions UK

A1400 Automatic Sliding Door Operator - Automatic Sliding Door Operator

A1400 Automatic Sliding Door Operator - Automatic Sliding Door Operator