fire protection

Generic ‘Location of fire alarm call point' signage object in a selection of typical standard dimensions with parameters to control visibility and orientation of 2D detail in plan.

Size options:

• 200 x 200 mm
• 150 x 150 mm
• 100 x 100 mm

QuickZone is a 2 or 4 zone Conventional / Twin Wire (sav-wire) control panel with integral power supply & space for standby batteries.

Panel Features:

• 2 or 4 zones.
• DIL selectable conventional or twin-wire (savwire) set up.
• Class change and alert inputs.
• Fire and fault relays.
• 2 monitored sounder circuits.
• 1 Amp switch mode PSU.
• Space for up to 3.2Ah batteries.
• False Alarm Management.
• Approved to EN54 2 & 4.
• 3 year warranty.

The QuickZone XL 32 is a 16 to 32 Zone Conventional Control Panel with integral power supply and space for appropriate standby batteries.

Panel Features:

• 16-32 zones.
• Integral 5 Amp switch mode PSU.
• Up to 18 Ah batteries.
• Class change and alert programmable inputs.
• Programmable relays and outputs.
• Up to 4 monitored sounder circuits.
• Integral detector removal monitoring.
• Test mode (with and without sounders).
• Alarm load of 2.4A shared across all sounder outputs.
• False Alarm Management.
• Zonal programming.
• Programmable outputs.
• Programmable output delays.
• Supports up to 8 QuickZone XL Repeater panels.
• Approved to EN54-2&4.
• 3 year warranty.

Crashrail equally suited to internal front or back of house settings. Inherently tough and designed with a sloping top edge to minimise dirt and dust retention.

• 200mm deep, flat-fronted crashrail offering 32mm projection
• Alternative projections possible with optional mounting brackets
• durablend™ cover, endcaps and brackets over continuous timber core
• Available in 25 durablend™ colours
• Recyclable PVC-free product

Curved deep profile crashrail used for providing discrete and effective impact protection to interior walls.

• 110 mm deep, bullnosed crashrail offering 60 mm projection.
• Alternative projections possible with optional mounting brackets.
• durablend™ cover, endcaps and brackets over aluminium retainer.
• Available in 25 durablend™ colours.
• Entirely recyclable PVC-free product.

Curved profile crashrail used for providing stylish and effective impact protection to interior walls.

• 200 mm deep, curved face crashrail offering 32 mm projection.
• Two alternative projections possible with optional mounting brackets.
• durablend™ cover, endcaps and brackets over aluminium retainer.
• Continuous concealed shock absorbing bumper.
• Available in 25 durablend™ colours.
• Entirely recyclable PVC-free product.

Resilient thermoplastic designed for cladding vulnerable surfaces to prevent impact damage. durablend™ sheet has a lightly textured cashmere surface that can withstand both frequent knocks and thorough cleaning. durablend™ is suited for cladding walls, columns, doors and frames.

• Can be cut, shaped and thermoformed for many applications.
• Cashmere surface disguises scuffs and bumps.
• durablend™ PVC free sheet combines well with durablend™ bumprails.
• Entirely recyclable PVC free product.
• Available in 25 durablend™ colours.

Tough and durable high-grade thermoplastic sheet designed for cladding vulnerable surfaces to prevent impact damage. dFend sheets have a lightly stippled surface that can withstand both frequent knocks and rigorous cleaning. dFend is suited for cladding walls, columns, doors and frames.

• Can be cut, shaped and thermoformed for many applications.
• Stippled surface disguises scuffs and bumps.
• Wall sheeting can be hot or cold welded.
• Can withstand rigorous cleaning routines.
• Available in 25 dFend colours.

The Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist-click motion) or mounted within an enclosure, for example a manual call point.

It is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue addressable control equipment.

The DIN-Rail Switch Monitor is designed to monitor the state of one or more single pole, volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.

• Four input states - 'normal', 'fault', 'pre-alarm' and 'alarm'
• Two visible LEDs
• Loop-powered

The Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.

• It can report fault, switch open and switch closed levels
• Three visible LED's
• Loop-Powered
• Capable of switching up to 30V at 1A

The DIN-Rail Dual Isolator provides two independent isolators which sense and isolate short circuits on Discovery and XP95 loops and spurs.

• Loop-powered
• Polarity sensitive
• Up to 20 detectors can be installed between isolators
• Allows fully isolated spurs

The DIN-Rail Sounder Controller (5 Amperes) is used to control the operation of a zone of externally powered sounders and report their status to the control panel.

• Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
• May be synchronised with loop sounders
• An opto-coupled input is provided to monitor the state of the external power supply
• Features group addressing
• Will accept a load of up to 5A

The DIN-Rail Mains Switching Input/Output Unit provides a mains-rated voltage-free, single pole change-over relay output and a monitored switch input. The unit supervises one or more normally-open switches connected to a single pair of cables.

• It can report fault, switch open and switch closed levels
• Three visible LEDs
• Capable of switching up to 8A at 250V AC
• Fits a standard 35mm DIN-Rail

The Switch Monitor is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.

• Four input states - 'normal', 'fault', 'pre-alarm' and 'alarm'
• Two visible LEDs
• Loop-Powered

The Switch Monitor Plus is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.

• Output for resetting a remote detector
• Four input states - 'normal', 'fault', 'pre-alarm', and 'alarm'
• Two visible LEDs
• Selectable alarm delay for monitoring flow switches

The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.

• Allows sounders to be operated continuously or be pulsed; 1 second on, 1 second off
• May be synchronised with loop sounders

The DIN-Rail Output Unit provides a voltage-free single-pole, change-over relay output. It is a simplified version of the Input/Output unit without circuitry for monitoring inputs.

• Capable of switching up to 30V to 1A
• Loop-powered

The Locally Powered Zone Monitor powers and controls the operation of a zone of up to 40 Orbis or Series 65 detectors. It is supplied with a polycarbonate back box for surface mounting.

The Mains Switching Input/Output Unit provides a voltage-free, single pole change-over relay output and a monitored switch input.

• Supervises one or more normally-open switches connected to a single pair of cables
• Three visible LEDs
• Capable of switching 250V AC at up to 5A

The Three Channel Input/Output Unit provides three voltage-free, single pole, changeover relay outputs and three monitored switch inputs.

• Supervises one or more normally open switches on each of the three inputs
• Loop-powered
• Capable of switching up to 30V at 1A on each of the three outputs

The Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Discovery or XP95 loop.

The DIN-Rail Input Output Unit provides a voltage free, single pole, change-over relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.

• It can report fault, switch open and switch closed levels
• Three visible LEDs
• Loop-powered
• Capable of switching up to 30V at 1A

The DIN-Rail Switch Monitor Plus is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue addressable control equipment.

• Output for resetting a remote detector
• Four input states - 'normal', 'fault', 'pre-alarm' and 'alarm'
• Two visible LEDs
• Loop-powered
• Selectable alarm delay for monitoring flow switches

DIN-Rail Interface Enclosures are available in two sizes and can be used for housing intrinsically safe (IS) barriers or DIN-Rail mounted interfaces.

A multi-purpose label that features a section for use with IS systems is supplied. For non-IS systems, the part referring to IS can simply be removed.

• Allows multiple interfaces to be housed together
• IP67 rated

The Output Unit provides a voltage free single pole, changeover relay output. It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs.

• Capable of switching up to 30V at 1A

Attractive heavy duty bed locators supplied in pairs for protecting walls and service points from accidental bed collisions. BL140 are mounted vertically and provide a focal point of reference for bed positioning within a room or hospital ward.

• 140 mm wide, 90 mm projection, 750 mm length (other length options).
• Continuous concealed shock absorbing bumper.
• Alternative projections with optional mounting brackets.
• Complete with aluminium retainer, durablend™ cover and endcaps.
• Available in 25 durablend™ colours.
• Entirely recyclable PVC-free product.