NBS Source
List your products

uninterruptible power supplies

2,490 results found

Sort by:

Showing 1-36 of 1338

4HR UPS - CCTV power supply

Elmdene International Ltd

The 4HR UPS™ Range provides extended standby power to critical security applications such as PoE and PoC CCTV systems.

When used with the recommended standby batteries the devices will provide approximately 4 hours standby time for the camera system in the event of a mains failure.

All models are housed within a standard 4U 19" rack enclosure and providing a true sine wave 220Vac output for the powered devices.

LED status indication allows quick system diagnosis on the front panel. Volt-free fault outputs are available on the rear panel for remote signalling if required.
This range offers the installer a simple ‘plug and play’ UPS installation, utilising industry standard batteries and enclosures.

Features and benefits:

  • 8, 16, 32 camera versions available.
  • LED indication (mains present, output health, standby mode operation).
  • Mains Loss - Volt-free fault output.
  • Temperature compensated battery charging.
  • Mains input 264V ac.
  • Single IEC 220Vac outlet socket.
  • Single IEC mains input (2m power cord provided).
  • Can accommodate 2 x 12V 18Ah batteries (8CAM version).
  • Floor standing battery enclosure with 3m battery lead for either 2 x 12V 38Ah (16CAM) or 2 x 12V 65Ah (32CAM).
  • Option to increase standby time by fitting 2 extra 12V 18Ah batteries (16CAM and 32CAM).

12V Access Control Power Supply

Elmdene International Ltd

This range has been specifically designed to house most common access control door controllers. With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.

All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure. Multi-fused outputs are provided to allow the installer to protect individual circuits as required. All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.

The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a ‘Fire’ door release relay.

Features and benefits:

  • PCB standoffs supplied for common A/C boards
  • Unique enclosure design (MULTI-ACCESS-x)
  • Cost effective switch mode technology
  • Front & rear enclosure tampers
  • Mains Fail relay output
  • Battery Monitoring (2A & 4A versions)
  • Volt-free fault outputs (2A & 4A versions)
  • Independent ancillary relay (8A versions)
  • Switchable 13.8V / 27.6V dc output (8A version)
  • Full rated current to load + 0.5A battery charging
  • 90 to 264V ac range
  • Electronic overload protection
  • Mains transient protection
  • LED Fault indication
  • Screen printing and bespoke models available on request
  • 3 year warranty

G Range N Series - 12V Power Supplies

Elmdene International Ltd

The 12V dc G Range, N Series power supplies has been designed for CCTV, access control and general purpose applications that require the use of a standby battery.

The products use energy efficient switch mode technology and have a universal mains supply input (90—264V ac).

Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A, 2A, 3A, 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed (module only) versions are also available if required.

Features and Benefits:

  • 13.8V dc output
  • Cost effective switch mode technology
  • High energy efficient - reducing energy bills
  • Front Tamper Protection
  • Modular construction means easy
    maintenance and upgrading
  • Full rated current to load +0.5A battery
    charging
  • 90 to 264V ac range
  • Electronic overload protection
  • Mains transient protection
  • LED indication:
  • Mains status
  • Fault
  • Screen printing available
  • 3 year warranty

POE ULTRAPOD - UPS unit

Elmdene International Ltd

A PoE powered device that provides power for critical IP systems such as Access Control, over a single Ethernet cable. The PoE UltraPod™ can charge up to a 12V 17Ah battery whilst continuing to provide a 13.8V dc output of up to 3A. If the PoE power being provided to the input fails, the battery seamlessly takes over continuing to provide the 13.8V dc voltage to the device.


The PoE Ultrapod™ provides up to 3A to the device with an additional 0.5A available for battery charging (PoE++ required). It is capable of powering most common Access Controllers along with the high power locks connected to them.

The PoE Ultrapod™ also has plug and play PoE and data connections, simplifying setup and also removes the requirement for a fused mains spur at the device location.

Features and benefits:

  • Available as a DIN mountable module or a boxed unit.
  • Boxed unit has space for 17Ah battery and fixing points for commonly used access control boards.
  • Provides remote fault monitoring outputs:
    – PoE Input failure.
    – Battery Low.
  • Data pass through for IP connections (10/100Mbps).
  • Powered remotely by:
    – PoE++ (PoE 802.3bt).
    – PoE+ (PoE 802.3at).
    – PoE (PoE 802.3af).
  • Battery Deep Discharge Protection.

POE MINIPOD - UPS unit

Elmdene International Ltd

A unique PoE+ powered device that can charge a 12V 7Ah battery whilst continuing to provide a PoE compliant output (up to 14W) to the PoE Powered Device. If the PoE power being provided to the input fails, the battery seamlessly takes over continuing to provide PoE to the device for up to 4 hours.


Housed within a steel IP66 rated enclosure it can be used in a variety of indoor and outdoor applications. Installer friendly RJ45 cable gland connections are provided with the enclosure to offer a simple plug and play solution without the requirement of terminating cat5 connections.

Features and benefits:

  • Powered remotely by PoE+ (PoE 802.3at).
  • Provides up to 14W to the PoE powered device.
  • Supplies battery back-up on loss of PoE power.
  • Enclosure accommodates an industry standard 12V 7Ah battery.
  • Deep Discharge Protection.
  • Offered in an IP66 Steel enclosure (for external use if required).
  • Can be used with Elmdene 4HR-UPS™ devices to offer complete system back up.

Power supply Units

Advanced Electronics Ltd

Suited for almost any application, the power supply unit/battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.

The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.

PSE and charger or PSE only options on the 3.0A and 5.0A versions.

A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages / current measurements to compatible control panel / modules.

Applications:

  • For any fire alarm system which specifies EN54-4 power supplies (e.g. BS 5839 code of practice).
  • These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.

Features and benefits:

  • A range of power supply equipment with power output options to suit most applications.
  • Universal AC input on the 3.0A and 5.0A versions.
  • High efficiency switched mode power supplies.
  • Compact 1.5A, 3.0A and 5.0A versions.

STX RANGE - Fire system power supply

Elmdene International Ltd

Switch Mode power supplies specifically designed for EN54 compliant Fire System Installations.

The units include intelligent battery charging using Elmdene’s efficient EcoCharge technology, possess mains and battery monitoring with independent voltfree outputs and also feature battery deep discharge protection in the event of a prolonged mains failure. The inclusion of LED indicators provides quick diagnostics of the status of the power supply, while a variety of enclosures offer the installer a choice of standby battery backup options.

Available in either 1A, 2A, 5A or 10A versions they are certified to EN54-4:1997, A1:2002 & A2:2006.

Features and benefits:

  • 27.6V dc output.
  • Cost effective switch mode technology.
  • Energy efficient.
  • Intelligent battery charging and monitoring using Elmdene’s EcoCharge technology.
  • Deep Discharge Protection.
  • Remote fault signalling.
  • Full rated current to load plus additional current for battery charging.
  • LED indication:
    – Mains status.
    – Output fault.
    – Battery fault.
    – Charger fault
  • Volt-free fault output - EPS:
    – Mains fail.
  • Volt-free fault output - PSU fault:
    – Battery fault.
    – Charger fault.
    – Loss of output.
  • Mains transient protection.
  • 10A version can charge up to 2 x 65Ah batteries housed in a separate enclosure (BATT-BOX-65).

Powder Coating - Interpon D3020

Akzo Nobel Powder Coatings Ltd

Interpon D3020 is an architectural grade powder coating which complies with BS EN 12206–1 for applications onto aluminium, BS EN 13438 for applications onto galvanized steel, the European Qualicoat - Class 3 and GSB specifications. Interpon D3000 is backed by an extended product performance guarantee.

Powder Coating - Interpon D2525 - Brilliance

Akzo Nobel Powder Coatings Ltd

A range of bright sparkling metallic finishes intended for use on exterior and interior architectural aluminium and galvanised steel.

Formulated in Interpon’s D2525 super-durable technology, Brilliance meets the demanding weathering requirements of the leading industry specifications including Qualicoat class 2, GSB Master, AAMA 2604-05 in addition to BS EN 12206.

Powder Coating - Interpon D2525 - Anodic

Akzo Nobel Powder Coatings Ltd

Metallic finishes that provide a strong match to the full spectrum of anodised effects. Anodic is suitable for aluminium and galvanized steel offering an extended guarantee and lower maintenance requirements. Furthermore, Anodic provides easy on-site repair of coating damage, tighter control of colour consistency and minimal environmental impact.

Powder Coating - Interpon D2525 RAL - Gloss

Akzo Nobel Powder Coatings Ltd

A range of super-durable gloss finishes from the Classic RAL collection intended for use on exterior and interior architectural aluminium and galvanised steel.

Formulated in Interpon’s D2525 system, this collection meets the demanding weathering requirements of the leading industry specifications including Qualicoat class 2, GSB Master, AAMA 2604-05 as well as BS EN 12206.

Powder Coating - Interpon D2525 RAL - Metallic

Akzo Nobel Powder Coatings Ltd

A range of subtle metallic finishes suitable for use on exterior and interior architectural aluminium and galvanised steel.

This range if formulated in super-durable polyester which meets the demanding weathering requirements of the leading industry specifications such as Qualicoat class 2, GSB Master, AAMA 2604-05 as well as BS EN 12206.

Powder Coating - Interpon D2015 Précis™

Akzo Nobel Powder Coatings Ltd

Interpon D2015 Précis complies with the requirements of Qualicoat Class 2, GSB Master and AAMA 2604 specifications. It is designed to offer significantly higher gloss retention and resistance to colour change combined with maximum film integrity to ensure long term cosmetic and functional protection.

Powder Coating - Interpon D2525 RAL - Matt

Akzo Nobel Powder Coatings Ltd

A range of super-durable matt finishes from the Classic RAL collection intended for use on exterior and interior architectural aluminium and galvanised steel.

Formulated in Interpon’s D2525 system, this collection meets the demanding weathering requirements of the leading industry specifications including Qualicoat class 2, GSB Master, AAMA 2604-05 as well as BS EN 12206.

Powder Coating - Interpon D2525 Collection Futura - Satin

Akzo Nobel Powder Coatings Ltd

A range of special effect finishes developed to meet contemporary architectural designs. Collection Futura offers a broad pallet consisting of textures, metallics and two tone effects suitable for use on exterior and interior architectural aluminium and galvanised steel.

Formulated in Interpon’s D2525 super-durable polyester, Collection Futura has been a favourite for architects for over 15 years, being specified on numerous prestigious projects. It meets the demanding weathering requirements of the leading industry specifications including Qualicoat Class 2, GSB Master, AAMA 2604-05, as well as BS EN 12206.

Powder Coating - Interpon D2525 Collection Futura - Sablé

Akzo Nobel Powder Coatings Ltd

A range of special effect finishes developed to meet contemporary architectural designs. Collection Futura offers a broad pallet consisting of textures, metallics and two tone effects suitable for use on exterior and interior architectural aluminium and galvanised steel.

Formulated in Interpon’s D2525 super-durable polyester, Collection Futura has been a favourite for architects for over 15 years, being specified on numerous prestigious projects. It meets the demanding weathering requirements of the leading industry specifications including Qualicoat Class 2, GSB Master, AAMA 2604-05, as well as BS EN 12206.

Powder Coating - Interpon D2525 Collection Futura - Matt

Akzo Nobel Powder Coatings Ltd

A range of special effect finishes developed to meet contemporary architectural designs. Collection Futura offers a broad pallet consisting of textures, metallics and two tone effects suitable for use on exterior and interior architectural aluminium and galvanised steel.

Formulated in Interpon’s D2525 super-durable polyester, Collection Futura has been a favourite for architects for over 15 years, being specified on numerous prestigious projects. It meets the demanding weathering requirements of the leading industry specifications including Qualicoat Class 2, GSB Master, AAMA 2604-05, as well as BS EN 12206.

Powder Coating - Interpon D2525 Collection Futura - Gloss

Akzo Nobel Powder Coatings Ltd

A range of special effect finishes developed to meet contemporary architectural designs. Collection Futura offers a broad pallet consisting of textures, metallics and two tone effects suitable for use on exterior and interior architectural aluminium and galvanised steel.

Formulated in Interpon’s D2525 super-durable polyester, Collection Futura has been a favourite for architects for over 15 years, being specified on numerous prestigious projects. It meets the demanding weathering requirements of the leading industry specifications including Qualicoat Class 2, GSB Master, AAMA 2604-05, as well as BS EN 12206.

Powertrack Underfloor Power Distribution

Marshall-Tufflex Ltd

A range of 63Amp powertrack complete with integral mounting brackets and pre-assembled end caps and couplers for ease of installation.

  • Each length of track comes complete with pre-assembled coupler, end cap and floor mounting brackets.
  • Maximum 63Amp rating
  • Tap-offs are key and colour coded for Standard and CE (Clean Earth)
  • Tap-offs are 32Amp rated or fused at 13Amp
  • Adhesive dust covers protect outlets
  • Compatible with MT32 pre-wired floor boxes

PWF - Powder coating

Powdertech (Corby) Ltd

Powdertech Wood Finish (PWF™) was formulated by Powdertech to match the natural variations in colour, grain density and grain pattern of wood. Wood has an instinctive appeal to us as a building material. We associate it with our natural world and enjoy its warmth and texture.

Benefits of PWF:

  • Combines the strength and longevity of metal with the look of natural wood.
  • No pattern repeat - no two coated pieces ever look exactly the same.
  • Can be applied to most metallic substrates including aluminium, galvanized.
  • steel, cast metals and stainless steel.
  • Excellent abrasion resistance.
  • Good weather resistance and colour stability.
  • Low maintenance - unlike wood.
  • Adapts to curved surfaces such as columns and posts.
  • Can be cut and drilled for fabrication.
  • There are 35 standard colours in smooth or texture finishes.
  • PWF Roughwood introduces the textured feel of wood.
  • Applied worldwide since 2000.

Evolution - Powder coating

Powdertech (Corby) Ltd

Evolution is an exciting development in powder coating design, creating beautiful and striking effects on the metal surface. Evolution finishes reflect the patinas caused naturally by metallic oxidation, ageing and changes in composition.

Evolution powders combine excellent visual detail with high protective performance.

  • Striking designs achieved through using polyester resin systems, and a bit of magic!
  • Excellent corrosion protection and weather resistance.
  • High level of colour and gloss retention.
  • Tactile finish.
  • All powders in the range are Qualicoat class 1 approved or better.
  • Conform to ISO 12206.

Anomatch - Powder coating

Powdertech (Corby) Ltd

Anomatch architectural powders have been specially designed to represent architectural anodising on both aluminium and galvanized steel. They are unique to Powdertech. Anomatch creates a finish that enhances the metal with a lustrous sheen.

Anodised aluminium has a reputation for its 'living' quality, with a natural metallic radiance. Anomatch creates the same effect with additional benefits.

  • A faster turn around and lower cost that anodising.
  • No need to use expensive high grade aluminium.
  • A homogenous finish across different metal batches and joined sections.
  • Steel can be chosen for its strength - and coated to appear anodised.
  • Qualicoat class 1 or class 2 approved.
  • Conform to ISO 12206.

Landscape - Powder coating

Powdertech (Corby) Ltd

The Landscape range is part of our commitment to offering you colours that are a little bit different, thought provoking or interesting. Eight carefully selected colour palettes have been created using tones and textures to reflect different landscapes, both natural and man-made.

You may want your project to complement the surrounding landscape or present a striking contrast. The Landscape range provides you with a colour palette to help you make the best choice.

  • Defining eight different environments; coastal, terrain, urban, industrial, lowland, upland, sky and space.
  • Tones and textures in each palette share an affinity, creating a particular style.
  • High performance corrosion protection and weather resistance.
  • Excellent durability and colour stability.
  • All powders are Qualicoat class 1 or class 2 approved.
    Conform to ISO 12206.

Showing 1-36 of 1338

Manufacturers related to your search

View all 278 Manufacturers

Literature items related to your search

View all 60 Literature items

Case studies related to your search

View all 1092 Case studies
Feedback