NBS Source
List your products

proofing services

1,306 results found

Sort by:

Showing 1-36 of 717

Wet Seal Tanking Kit

Norcros Adhesives, trading division of Norcros Group (Holdings)

The Wet Seal Tanking Kit is a white brush applied tanking membrane specifically designed for use beneath ceramic, porcelain and natural stone tiles and mosaics, on both internal walls and floors in installations subject to intermittent and frequent wetting such as domestic and commercial showers, wet rooms and saunas. The kit comprises 5 kg of liquid membrane, 500 mL of Norcros Prime Bond and 10 m of 100 mm wide waterproof polyester tape. Additional tape and waterproof polyester matting are available on request.

Application:

- Floors:

Apply Prime Bond diluted 1:2 with water and apply one coat and allow to dry. Apply Norcros Wet Seal liquid over the floor area. On timber floors, suspended floors and in areas of heavy use, Norcros Waterproof Matting should be laid into the wet membrane, overlapping the matting by approximately 29 mm, apply a second coat of Norcros Wet Seal liquid.

- Walls:

Apply Prime Bond diluted 1:2 with water and apply one coat and allow to dry. Brush apply Norcros Wet Seal liquid to internal and external corners, junctions between walls and floor, joints between differing substrates and service penetrations. Fix Norcros Waterproof Tape into the wet membrane ensuring that there are no gaps in the tape; apply a second coat of Norcros Wet Seal over the tape. Brush apply Norcross Wet Seal liquid over the remaining area.

RIW Sheetseal 9000 DPC - High-performance damp proof course

RIW

RIW Sheetseal 9000 DPC is a high performance polymeric DPC, composed of ethylene propylene rubbers and polyester fibres which increase the tensile strength and elongation at break, making the system more resistant to tearing and puncturing.

RIW Sheetseal 9000 DPC is strong and flexible with good workability, for building into masonry to provide an efficient method of controlling water penetration within a building.

DELTA® Plaster Lath - Damp proof lathing

Delta Membrane Systems Ltd

A dimpled membrane with a mesh face, providing a key for plaster, render or dab fixed plasterboard, available in brown or clear.

Features:

  • The dimples form an air gap which insulates and allows for ventilation and natural drying of the wall.
  • The air gap can be vented externally with the use of air vents, or internally using Delta-PT profiles fixed to the top and bottom of the wall.

Fixing:

  • Delta-Lath is fixed to the wall with Lath plugs and sealed with Delta sealant.
  • Sheets must be fixed along all edges and generally at not more than 250 mm vertical and horizontal staggered centres using Delta-PT Fixing Plugs and Delta Sealant or grommet. Alternatively, use the Delta-Qwik-Seal Plug.
  • When used externally, fixing centres must be closed up to 150 mm.

Hydraseal DPM (Surface Damp Proof Membrane)

Flowcrete UK Ltd

A liquid applied, solvent and water free, epoxy resin damp proof membrane designed to withstand moisture vapour from substrates.

Hydraseal DPM allows immediate installation of moisture sensitive floor finishes onto concrete and cementitious screeds which have a moisture content with a Relative Humidity up to 100%.

  • Low Odour
  • Solvent Free
  • Early Installation
  • Gap Filling Properties
  • Impermeable to Water
  • Tolerates up to 100% Relative Humidity

 

Aqualock OneCoat (Surface Damp Proof Membrane)

Flowcrete UK Ltd

A solvent and water free, epoxy resin, liquid applied surface damp proof membrane designed to withstand moisture vapour from substrates.

Aqualock OneCoat allows immediate installation of moisture sensitive floor finishes onto concrete and cementitious screeds which have a moisture content of up to 97% Relative Humidity. It is suitable with underfloor heating.

  • Tolerates up to 97% relative humidity
  • Excellent gap filling properties
  • Impervious to water and excellent adhesion to concretes and screeds
  • Solvent free
  • Low odour

Puraflex DPC

Cordek Ltd

A high performance, hydrocarbon and chemical resistant barrier with exceptional resistance to a wide range of pollutants including hydrocarbons, industrial chemicals, toxic waste, natural and radioactive gases. The DPC is generally used within wall constructions, predominantly to prevent the transmission of VOCs and ground gases into the wall cavities.

Features:

  • Excellent all round physical properties, including resistance to VOCs, hydrocarbons, methane, carbon dioxide and radon.
  • Flexible, even at low temperatures.
  • Good mortar adhesion properties.
  • Can be used in conjunction with the Cordek Puraflex VOC and Puraflex Tank membranes.

Visqueen Gas Resistant DPC

Visqueen

Visqueen Gas Resistant (GR) Damp Proof Course is a flexible polyethylene DPC with an aluminium foil designed to prevent the transmission of carbon dioxide, radon, methane and low level hydrocarbon vapours. This is in addition to the product’s usage as a damp proof course. Resistance to harmful gases is achieved by an integral aluminium film.

For installation and test results information please refer to the manufacturer's datasheet.

Quality and Environmental Assurance:

Visqueen's products are manufactured under a Quality Management System approved to ISO 9001: 2008; Environmental System 14001:2004 and BS OHSAS 18001:2007.

Radon Barrier

Cavity Trays Ltd

Preformed radon cavity barrier lengths and angles for use within cavity walls to arrest gases rising within cavity which are redirected and exhausted via high performance cavibricks.

Showing 1-36 of 717

Manufacturers related to your search

View all 283 Manufacturers

Literature items related to your search

View all 88 Literature items

Case studies related to your search

View all 501 Case studies
Feedback