NBS Source
List your products

preparatory treatments

527 results found

Sort by:

Showing 1-36 of 432

BASF - MasterEmaco P 5000 AP

BASF plc, Construction Chemicals

MasterEmaco P 5000 AP active primer, not only reinstates a high pH environment it also contains active corrosion inhibiting additives for the protection of reinforcement steel. It can also be used as an adhesive bonding slurry for subsequent repair mortars.

It is a ready to use material that contains Portland cement, well graded fine fillers, re-dispersible powder and special additives.

When mixed with water, it forms slurry that can be applied by brush to the clean exposed reinforcement, or directly on the dampened, prepared concrete substrate when used as a bonding coat.

Features and benefits:

  • Meets all major national and international standards for steel priming in concrete repair systems.
  • Excellent rust inhibiting properties as it reinstates a high pH environment.
  • Contains active corrosion inhibitors to further protect the steel.
  • Polymer modified for additional adhesive bond to the steel.
  • Does not affect the pull out strength of reinforcement steel.
  • Compatibility with steel reinforcing bars and concrete or repair mortars.
  • Low chromate (Cr[VI] < 2 ppm).
  • CE marked.

Applications:

MasterEmaco P 5000 AP is used for the protection of reinforcement steel:

  • When steel is visible and the available depth of cover is less than 10 mm.
  • When concrete is contaminated with chlorides.
  • In critical environments when extra protection is specified.
  • With MasterEmaco N 5200 repairs when steel is visible.
  • When the timing at the jobsite does not allow for the repair mortars to be applied immediately after cleaning the steel.

It can also be used to aid bonding and application properties of hand applied repair mortars in extreme thicknesses and conditions.

Altro Expand Flexible Joint System

Altro

Two part, chemically resistant, polyurethane/ epoxy flexible jointing compound, specifically designed for industrial flooring. AltroExpand accommodates normal thermal and vibration movement whilst providing sufficient strength to protect joint arises from damage and erosion. Typical applications include movement joints in old and new floors, factories, warehouses, workshops, hangers, etc.

Alsan 104

Soprema UK

Single component, pre-treatment, metal primer for polymethyl methacrylate (PMMA) applications.

Mapeproof 1K Turbo

Mapei (UK) Ltd

Single component, solvent free, moisture curing and rapid drying polyurethane surface primer/ membrane with very low emission of volatile organic compounds (EMICODE EC1 R). Hardens due to the humidity present in the surrounding air and in the screed.

Waterproofing cementitious screeds, which are not subject to rising damp, but have a residual humidity content higher than the British Standard 75% RH (BS 8203) for laying resilient and wood flooring.

Applications:

  • Consolidating cementitious screeds which are mechanically weak.
  • Waterproofing treatment before laying wooden flooring, to prevent a failure due to excessive residual humidity in the cementitious screed.

Elastocolor Paint

Mapei (UK) Ltd

A ready-to-use fixative, based on synthetic resins in solvent. It easily penetrates into porous substrates and ensures excellent insulation and good adherence to the paint that will be applied. Elastocolor Primer satisfies UNI 8657 and UNI 8658 concerning anti-evaporation products.

Applications:

  • As a fixing treatment for chalking and dusty substrates such as cementitious renders and concrete surfaces before painting with Elastocolor Paint.
  • Anti-evaporation protection of fresh Mapegrout repair mortars, from rapid evaporation of water due to sun and wind.

Alsan 172

Soprema UK

Rapid curing, unpigmented polymethyl methacrylate (PMMA) resin primer formulation for asphalt substrates.

Alsan 176

Soprema UK

Rapid curing and scratch filling polymethyl methacrylate (PMMA) primer for porous substrates.

Alsan 170

Soprema UK

Unpigmented and rapid curing polymethyl methacrylate (PMMA) primer for absorbent substrates such as concrete or timber.

Alsan 175

Soprema UK

Polyurethane based, fast-curing, colourless and moisture-curing base coat used on glass substrates for polymethyl methacrylate (PMMA) applications.

Alsan 103

Soprema UK

Single component specialist thermoplastic polyolefin (TPO) primer for polymethyl methacrylate (PMMA) applications.

Showing 1-36 of 432

Manufacturers related to your search

View all 16 Manufacturers

Literature items related to your search

View all 12 Literature items

Case studies related to your search

View all 83 Case studies
Feedback