NBS Source
List your products

intruder detection and alarm systems

10,168 results found

Sort by:

Showing 1-36 of 6797

Door Top Alarm

Intastop Ltd

Tamper proof system detects when weight is applied to the top of the door and has a variable alarmed delay setting between 5 and 30 seconds. The Door Top Alarm connects via mains power and is compatible with most staff attack systems. It can alert staff via audible alarm, visible light, staff indicator panel and via the pager or main computer.

If the top of the alarm is pressed nothing will happen until the programmed delay setting in the electronic box is activated. It has a three-tiered LED system on the door top alarm which is mirrored on the electronic body and optionally on nurse stations. LED lighting shows it working without setting the alarm off, helping with risk assessment period checks. LED is not visible to patients. An inspection magnet is used to aid installation and carry out risk assessments. The electronic box is housed in ceilings/ lofts and connects to the mains power and staff attack system. Power transfer to the door goes via Intastop’s Electrical Transfer Hinge which ensures all cabling and electronics are concealed.

Performance tested to 1.25 million cycles; it has a removable option, where the hinge is designed to be installed in two sections. This allows the current carrying cable to be serviced or replaced without removing the door from the frame.

Features:

  • Fire tested to BS 476-20 and -22 for 30 minutes.
  • Programmed electronics box with delay setting options.
  • Connects to existing staff attack system.
  • Suitable for both single and double acting hinges.
  • Suitable for refurbishment and new build.
  • Suitable for 44 and 54 mm door thicknesses.

Benefits:

  • Helps prevent suicide at the top of doors.
  • Can be used across a multiple of applications including bedroom and bathroom doors.
  • Enables staff to respond immediately to attempted suicides and emergency situations.
  • Tamper proof preventing false alarms.

Disclaimer: Please note that Intastop offers a range of measures designed to reduce the risk of self-harm or suicide, and does not offer any guarantee that it will not take place. The solutions have been designed as a deterrent only.

All products must be installed and maintained as per Intastop’s fitting instructions and/ or the operation and maintenance manual. Operation and Maintenance Manual is available upon request.

Intruder alarm panel

NBS

Generic intruder alarm panel with parametric values for length, width, and height.
Suitable for surface or recessed wall mounting.

Remote keypad

NBS

Generic remote keypad with parametric values for length, width, and height.

Overflow Detection System

Dart Valley Systems Ltd

The control system can monitor up to 20 cubicles and is usually remotely sited; in the cleaner’s cupboard at the end of a toilet block for example. The digital display on the front of the control box makes it easy to identify which cistern is overflowing. There is also the facility to have an additional warning light panel outside the cleaner’s cupboard which will flash until the problem is rectified. You can also monitor the OFD control system from a BMS system if necessary.

This download contains BIM objects that represent the following products:

  • AC07-001

STX RANGE - Fire system power supply

Elmdene International Ltd

Switch Mode power supplies specifically designed for EN54 compliant Fire System Installations.

The units include intelligent battery charging using Elmdene’s efficient EcoCharge technology, possess mains and battery monitoring with independent voltfree outputs and also feature battery deep discharge protection in the event of a prolonged mains failure. The inclusion of LED indicators provides quick diagnostics of the status of the power supply, while a variety of enclosures offer the installer a choice of standby battery backup options.

Available in either 1A, 2A, 5A or 10A versions they are certified to EN54-4:1997, A1:2002 & A2:2006.

Features and benefits:

  • 27.6V dc output.
  • Cost effective switch mode technology.
  • Energy efficient.
  • Intelligent battery charging and monitoring using Elmdene’s EcoCharge technology.
  • Deep Discharge Protection.
  • Remote fault signalling.
  • Full rated current to load plus additional current for battery charging.
  • LED indication:
    – Mains status.
    – Output fault.
    – Battery fault.
    – Charger fault
  • Volt-free fault output - EPS:
    – Mains fail.
  • Volt-free fault output - PSU fault:
    – Battery fault.
    – Charger fault.
    – Loss of output.
  • Mains transient protection.
  • 10A version can charge up to 2 x 65Ah batteries housed in a separate enclosure (BATT-BOX-65).

Kidde Mains-Powered Heat Alarm

Kidde Safety Europe Ltd

Kidde mains-powered heat alarm models:
- KF30 with 9V Alkaline battery back-up
- KF30LL with 10-year lithium battery back-up
- KF30R with rechargeable battery back-up
These alarms will interlink with up to 23 other Kidde mains-powered alarms.

Kidde Mains-Powered Optical Smoke Alarm

Kidde Safety Europe Ltd

Kidde mains-powered optical smoke alarm models:
- KF20 with 9V Alkaline battery back-up
- KF20LL with 10-year lithium battery back-up
- KF20R with rechargeable battery back-up
These alarms will interlink with up to 23 other Kidde mains-powered alarms.

Kidde Mains-Powered Ionisation Smoke Alarm

Kidde Safety Europe Ltd

Kidde mains-powered ionisation smoke alarm models:
- KF10 with 9V Alkaline battery back-up
- KF10LL with 10-year lithium battery back-up
- KF10R with rechargeable battery back-up
These alarms will interlink with up to 23 other Kidde mains-powered alarms.

Voice Alarm Racks

Baldwin Boxall Communications Ltd

IP30 rated rack enclosures for voice alarm amplifiers (and controlling equipment -
VACIE) are a requirement of BS EN54. Baldwin Boxall use robust, high quality rack
enclosures and equipment for their VIGIL voice alarm systems.

Power supply Units

Advanced Electronics Ltd

Suited for almost any application, the power supply unit/battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.

The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.

PSE and charger or PSE only options on the 3.0A and 5.0A versions.

A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages / current measurements to compatible control panel / modules.

Applications:

  • For any fire alarm system which specifies EN54-4 power supplies (e.g. BS 5839 code of practice).
  • These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.

Features and benefits:

  • A range of power supply equipment with power output options to suit most applications.
  • Universal AC input on the 3.0A and 5.0A versions.
  • High efficiency switched mode power supplies.
  • Compact 1.5A, 3.0A and 5.0A versions.

QuickZone Repeater - Repeater panel

Advanced Electronics Ltd

QuickZone XL Repeater Panel.

Repeater Panel Features:

  • Same easy-to-use controls and indications as panel.
  • Can be fully functional or passive.
  • 12 zonal fault and fire indication.
  • 1.25 Amp integral PSU.
  • Class change and alert input.
  • Test mode and disablement functions.
  • Up to 8 per main panel.
  • Approved to EN54-2&4.
  • 3 year warranty.

QuickZoneXL - Conventional fire panel

Advanced Electronics Ltd

QuickZone XL is up to 12 zone Conventional / Twin Wire (sav-wire) control panel with integral power supply & space for standby batteries.

Panel Features:

  • 4-12 zones.
  • DIL selectable conventional or twin wire (sav-wire) set up per zone.
  • Integral 2.5 Amp switch mode PSU.
  • Up to 7 Ah batteries.
  • Class change and alert programmable inputs.
  • Programmable relays and outputs.
  • Up to 6 monitored sounder circuits.
  • Integral detector removal monitoring.
  • Test mode (with and without sounders).
  • Alarm load of 2.4A shared across all sounder outputs.
  • Modular expansion zone cards available.
  • 2 additional sounder circuits with expansion card.
  • False Alarm Management.
  • Zonal programming.
  • Programmable outputs.
  • Programmable output delays.
  • Supports up to 8 QuickZone XL Repeater panels.
  • Approved to EN54-2&4.
  • 3 year warranty.

QuickZoneXL32 - Conventional fire panel

Advanced Electronics Ltd

The QuickZone XL 32 is a 16 to 32 Zone Conventional Control Panel with integral power supply and space for appropriate standby batteries.

Panel Features:

  • 16-32 zones.
  • Integral 5 Amp switch mode PSU.
  • Up to 18 Ah batteries.
  • Class change and alert programmable inputs.
  • Programmable relays and outputs.
  • Up to 4 monitored sounder circuits.
  • Integral detector removal monitoring.
  • Test mode (with and without sounders).
  • Alarm load of 2.4A shared across all sounder outputs.
  • False Alarm Management.
  • Zonal programming.
  • Programmable outputs.
  • Programmable output delays.
  • Supports up to 8 QuickZone XL Repeater panels.
  • Approved to EN54-2&4.
  • 3 year warranty.

QuickZone - Conventional fire panel

Advanced Electronics Ltd

QuickZone is a 2 or 4 zone Conventional / Twin Wire (sav-wire) control panel with integral power supply & space for standby batteries.

Panel Features:

  • 2 or 4 zones.
  • DIL selectable conventional or twin-wire (savwire) set up.
  • Class change and alert inputs.
  • Fire and fault relays.
  • 2 monitored sounder circuits.
  • 1 Amp switch mode PSU.
  • Space for up to 3.2Ah batteries.
  • False Alarm Management.
  • Approved to EN54 2 & 4.
  • 3 year warranty.

MxPro 4 Remote Terminal Fire Alarm Control Terminal

Advanced Electronics Ltd

Based around two core products, the MxPro 4 Remote Display Terminal (RDT) and the fully functional MxPro 4 Remote Control Terminal (RCT), both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced, flash based, microprocessor technology.

All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable.

Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.

The 'Ad-NeT' network operates as a true peer-to-peer system with full cross panel reporting, control and cause and effect functionality of up to 1000 zones.

Features:

  • The display information is fully programmable by individual zone or sector and can display any combination of fires, faults, pre-alarms or plant alarms. E.g. can display all information in its own sector, but can only show fire signals from other sectors of a building.
  • Both remote terminals incorporate buzzer mute, view, enable/disable and test facilities with a dedicated system and navigation keys for simple user control.
  • Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • The RCT has additional sector based control keys for Evacuate, Silence, Resound and Reset, which allows other networked panels to selectively respond to controls as programmed. E.g. on a site with multiple buildings, a user may be allowed to silence and reset fires originating in their own building. Fires originating from other buildings are displayed but cannot be reset.
  • By using flash memory and an advanced graphical display the remote terminals can be easily configured to operate in virtually any language, with any character set and allows for the installer’s logo and company details to be displayed on the LCD display during normal operation.

MxPro 5 Fire Alarm Control Panel 1 Loop

Advanced Electronics Ltd

Features and benefits:

  • EN54 Part 2, 4 and 13 Approved.
  • Certified by FM Approvals to EN 54 Parts 2 and 4.
  • Single loop.
  • Small enclosure.
  • Maximum 7Ah internal batteries.
  • 20 programmable LED’s.
  • Optional programmable key switch.
  • Programmable Input.
  • Medium, Large and Deep enclosure options.
  • Compatible with Alarm Calm false alarm management.

MxPro 4 Remote Terminal Fire Alarm Display Terminal

Advanced Electronics Ltd

Based around two core products, the MxPro 4 Remote Display Terminal (RDT) and the fully functional MxPro 4 Remote Control Terminal (RCT), both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced, flash based, microprocessor technology.

All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable.

Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.

The 'Ad-NeT' network operates as a true peer-to-peer system with full cross panel reporting, control and cause and effect functionality of up to 1000 zones.

Features:

  • The display information is fully programmable by individual zone or sector and can display any combination of fires, faults, pre-alarms or plant alarms. E.g. can display all information in its own sector, but can only show fire signals from other sectors of a building.
  • Both remote terminals incorporate buzzer mute, view, enable/disable and test facilities with a dedicated system and navigation keys for simple user control.
  • Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • The RCT has additional sector based control keys for Evacuate, Silence, Resound and Reset, which allows other networked panels to selectively respond to controls as programmed. E.g. on a site with multiple buildings, a user may be allowed to silence and reset fires originating in their own building. Fires originating from other buildings are displayed but cannot be reset.
  • By using flash memory and an advanced graphical display the remote terminals can be easily configured to operate in virtually any language, with any character set and allows for the installer’s logo and company details to be displayed on the LCD display during normal operation.

MxPro 4 Fire Alarm Control Panel 1 Loop

Advanced Electronics Ltd

The MxPro 4 comes fitted complete with an internal loop driver card (Apollo/Hochiki only) and 2 onboard sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash-based microprocessor technology driven by an onboard 24V DC, 2 Amp high efficiency switched mode power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys make this control panel user-friendly as well as installer friendly due to the uncomplicated, trouble-free, commissioning and fault finding.

Powerful cause and effect programming coupled with dynamic zoning makes the panel suitable for a wide range of site applications, from small to large complex multi-area systems. Fully on-site programmable via on board alphanumeric
keypad or PC-NeT configuration tools.

An extensive suite of PC based, software programs have been developed to supplement the MxPro 4 series fire panels.

Features:

  • Full support of Apollo (Discovery, Xplorer S90 & XP95), Hochiki ESP protocols.
  • Advanced graphical LCD user interface with up to 250 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
  • Dedicated RS232 serial port for direct PC or modem connection.
  • Installer friendly auto-learn and loop detection facility for uncomplicated, trouble-free, commissioning and fault finding.
  • Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • Flash memory and the advanced graphical display enables the panels to be configured to operate in virtually any language with any character set and allows the installer's logo and company details to be applied to the LCD display.
  • Robust, removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • When connected to the fault tolerant Ad-NeT network, the panel operates as a true peer-to-peer interface with full cross-panel reporting, control and cause-and-effect functionality.

MxPro 4 Fire Alarm Control Panel 1-2 Loop

Advanced Electronics Ltd

The MxPro 4 series is fully expandable from 1 to 2 loops complete with 2 onboard sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash based micro processor technology driven by a 4 Amp power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys make this control panel user and installer friendly due to the uncomplicated, trouble free, commissioning and fault-finding.

Powerful cause and effect programming coupled with dynamic zoning makes the panel suitable for a wide range of site applications, from small to large complex multi-area systems. Fully on site programmable via onboard alphanumeric keypad or PC-NeT Configuration tools.

An extensive suite of PC based, software programs have been developed to supplement the MxPro 4 series fire panels.

Features:

  • Fully expandable from 1 to 2 loops via common plug in loop driver boards.
  • Full support of Apollo (Discovery, Xplorer S90 & XP95), Hochiki ESP, Nittan Evolution and AV protocol.
  • Advanced graphical LCD user interfaces with up to 1000 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
  • 4 Amp power supply and charger to EN54 part 4.
  • Dedicated RS232 serial port for direct PC or modem connection.
  • Dual, flash based, microprocessor technology with onboard Real Time Clock. Optional onboard or remote printer.
  • Installer friendly Auto-learn and Loop Detection facility for troublefree, commissioning. Fully on-site programmable via on-board alphanumeric keypad or PC configuration tools.
  • Flash memory and the advanced graphical display enables the panels to be configured to operate in virtually any language with any character set and allows the installer's logo and company details to be applied to the LCD display.
  • Robust, removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • When connected to the fault tolerant Ad-NeT network, the panel operates as a true peer-to-peer interface (with up to 1000 shared zones) with full cross panel reporting, control functionality.

MxPro 5 Fire Alarm Control Panel 1-2 Loop

Advanced Electronics Ltd

Features and benefits:

  • EN54 Part 2, 4 and 13 Approved.
  • Certified by FM Approvals to EN 54 Parts 2 and 4.
  • One or two loops.
  • Medium enclosure.
  • Maximum 12Ah internal batteries.
  • Up to 50 additional programmable LED’s.
  • Up to 8 programmable key switches or 4 plus printer.
  • Plexi-glass door option.
  • Large and Deep enclosure options.

MxPro 5 Fire Alarm Control Panel 1-4 Loop

Advanced Electronics Ltd

Features and benefits:

  • EN54 Part 2, 4 and 13 Approved.
  • Certified by FM Approvals to EN 54 Parts 2 and 4.
  • One to four loops.
  • Large enclosure.
  • Maximum 17Ah internal batteries.
  • Up to 200 additional programmable LED’s.
  • Up to 8 programmable key switches or 4 plus printer.
  • Plexi-glass door option.
  • Deep and Extended enclosure options.

MxPro 4 Fire Alarm Control Panel 1-4 Loop

Advanced Electronics Ltd

The MxPro 4 series is fully expandable from 1 to 4 loops complete with 4 onboard sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash-based microprocessor technology driven by a 5 Amp power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys make learning this control panel user-friendly as well as installer friendly due to the uncomplicated, trouble free, commissioning and fault finding.

Powerful Cause and Effect programming coupled with dynamic zoning make the panel suitable for a wide range of site applications, from small to large complex multi area systems. Fully on site programmable via on board alphanumeric keypad or PC -NeT configuration tools.

An extensive suite of PC based, software programs have been developed to supplement the MxPro 4 series Fire panels.

Features:

  • Fully expandable from 1 to 4 loops via common plug in loop driver boards.
  • Advanced graphical LCD user interfaces with up to 1000 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
  • 5 Amp power supply and charger to EN54 part 4.
  • Dedicated RS232 serial port for direct PC or modem connection.
  • Graphical display configurable for virtually any language
  • When connected to the fault tolerant Ad-NeT network, the panel operates as a true peer-to-peer interface (with up to 1000 shared zones) with full cross panel reporting, control functionality.
  • Installer friendly Auto-learn and Loop Detection facility for troublefree, commissioning. Fully on-site programmable via on-board alphanumeric keypad or PC configuration tools.

MxPro 4 Fire Alarm Control Panel 2-8 Loop

Advanced Electronics Ltd

The MxPro 4 series is fully expandable from 2 to 8 loops complete with 8 onboard sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash-based microprocessor technology driven by a 5 Amp power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys make learning this control panel user-friendly as well as installer friendly due to the uncomplicated, trouble free, commissioning and fault finding.

Powerful Cause and Effect programming coupled with dynamic zoning make the panel suitable for a wide range of site applications, from small to large complex multi area systems. Fully on site programmable via on board alphanumeric keypad or PC-NeT Configuration tools.

An extensive suite of PC based software programs has been developed to supplement the MxPro 4 series Fire panels.

Features:

  • Robust, removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • Advanced graphical LCD user interfaces with up to 1000 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
  • 2 x 5 Amp power supply and charger to EN54 part 4.
  • Dedicated RS232 serial port for direct PC or modem connection.
  • Installer friendly Auto-learn and Loop Detection facility for trouble-free, commissioning. Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • The graphical display enables the panels to be configured to operate in virtually any language with any character set and allows the installer's logo and company details to be applied to the LCD display.
  • Ad-NeT network with up to 1000 zones.

MxPro 5 Fire Alarm Control Panel 2-8 Loop

Advanced Electronics Ltd

Features and benefits:

  • EN54 Part 2, 4 and 13 Approved.
  • Certified by FM Approvals to EN 54 Parts 2 and 4.
  • Two to eight loops.
  • Extended enclosure.
  • Maximum 45Ah internal batteries.
  • Up to 200 additional programmable LED’s, 2 x switch cards or mimic.
  • Up to 8 programmable key switches or 4 plus printer.
  • Plexi-glass door and external battery box option.

Speedmaster – With infill options for systems above - Carbon steel gate

CLD Fencing Systems

SpeedMaster bi-folding trackless speed gates are the ideal solution where speed of opening and closing is essential or where space is at a premium. The gates typically open at more than twice the speed of a traditional swinging gate of the same size which ensure a fast throughput of traffic while maintaining security of the site.

Uses a PLC controlled, inverter drive three phase motor, worm and wheel gearbox with a direct drive shaft connected to the gate leaf, which ensures a smooth and positive movement. The speed gates are rated for 100% duty cycle (continuous operation).

Manufactured using rectangular hollow steel (RHS) frame and circular hollow section (CHS) steel infills. A wide range of alterative infills are available to suit customer requirements and to match adjoining fencing design. Also available are spiked tops, warning lights and sirens if required.

Suitable for industrial and retail parks, data centres, airports and seaports and MOD establishments.

Features:

  • Secure design which significantly reduces tailgating.
  • Range of infill options available.
  • Smooth operation.
  • RAL colours available.
  • Catch plate for security.
  • Safety edges as standard.
  • Heavy duty hinges.

Applications:

  • Industrial and retail parks.
  • Data centres.
  • Airports and seaports.
  • Ministry of Defence (MOD).
  • CE approved.

Showing 1-36 of 6797

Manufacturers related to your search

View all 433 Manufacturers

Literature items related to your search

View all 1786 Literature items

Case studies related to your search

View all 1585 Case studies
Feedback