NBS Source
List your products

concrete lintels

2,600 results found

Sort by:

Showing 1-36 of 2138

Economy Lintels

Naylor Concrete Products Ltd

A cost effective, fully reversible unit for use in standard housing or a small load situation. All Economy lintels are suitable for use with L-Strip. An ex-steel mould finish and made from wet cast concrete. May see small air holes on the surface, aggregate and concrete fines to bottom arrises. For use normally in plastered situations. For exposed situations see Fair Faced range.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.

Special Lintels

Naylor Concrete Products Ltd

Naylors can cast any lintel or concrete product for consistent quality and reduce all the risk associated with on-site casting. This range is not only for bespoke concrete lintels such as curved on plan, curved on elevation, recessed and notched units, cast-in inserts or unusual shaped or design of lintels, but also for padstones, cover slabs, concrete walling solutions, concrete supports, beams and anything else a self-builder, contractor or civil engineer may require.

Scope of manufacture:

  • Weight – maximum 4 tonnes.
  • Width – maximum 2 m.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

P100 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

P140 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R3 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R6 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R7 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R8 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R2 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

P190 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

P215 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

S5 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

S8 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R13 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R14 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R9 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R11 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R12 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

R190 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

S4 - Lintels

Naylor Concrete Products Ltd

The best performing concrete lintels on the UK market. All units are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. With a range of 19 different sections sizes and with lengths available up to 6200 mm on certain section sizes. An ex-steel mould finish and made from wet cast concrete. Due to additives these units are suitable for use below ground. Different reinforcement type and position than that used in the Naylor economy range. May see small air holes on the surface, aggregate and concrete fines to bottom arises. For use normally in plastered, unexposed situations.

Standards:

  • Design complies with BS 8110-1 Section 4.
  • Manufactured in accordance with BS EN 845-2.
  • Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.

Faced R2 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Faced R3 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Faced R6 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Faced R14 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Faced R190 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Faced S5 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Faced S8 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Faced R12 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Faced R13 - Lintels

Naylor Concrete Products Ltd

Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.

Fair Faced Fire-Spec range:

Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.

Standards:

  • Design complies with BS 8110 table 4.3, section 2.
  • Manufactured in accordance with BS EN 845-2: 2003.
  • Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
  • All fire rated lintels produced by Naylor Lintels comply with BS 8110 table 4.3, section 2.

Showing 1-36 of 2138

Manufacturers related to your search

View all 61 Manufacturers

Literature items related to your search

View all 213 Literature items

Case studies related to your search

View all 249 Case studies
Feedback