"roof tiles"

9,355 results found

Sort by:

Showing 829-864 of 957

4.1.2 Roof - Flat or Tapered Foamglas Insualtion (Cold Applied) with Membranes

4.1.2 Roof - Flat or Tapered Foamglas Insualtion (Cold Applied) with Membranes

FOAMGLAS®

4.1.2 Roof - Flat or Tapered Foamglas Insualtion (Cold Applied) with Membranes.
13/5005 SILCOR 900MP SPRAY-APPLIED ROOF WATERPROOFING SYSTEM

13/5005 SILCOR 900MP SPRAY-APPLIED ROOF WATERPROOFING SYSTEM

GCP Applied Technologies

18/5589 Dura-Coat Liquid-Applied Roof Waterproofing System

18/5589 Dura-Coat Liquid-Applied Roof Waterproofing System

Garland UK

15/5238_2 Torch-Free (T-F) Roof Waterproofing System

15/5238_2 Torch-Free (T-F) Roof Waterproofing System

IKO PLC

91/2671_2 Superflex T-O Slate Roof Waterproofing Systems

91/2671_2 Superflex T-O Slate Roof Waterproofing Systems

IKO PLC

15/5283_2 IKO Enertherm ALU Insulation Board for Pitched Roofs

15/5283_2 IKO Enertherm ALU Insulation Board for Pitched Roofs

IKO PLC

15/5190_1 For use in Warm Non-Ventilated and Cold Ventilated Roofs

15/5190_1 For use in Warm Non-Ventilated and Cold Ventilated Roofs

IKO PLC

15/5190_4 For use in Warm Non-Ventilated and Cold Ventilated Roofs

15/5190_4 For use in Warm Non-Ventilated and Cold Ventilated Roofs

IKO PLC

12/4959_4 Langley’s 40 Total Warm Roof Waterproofing systems

12/4959_4 Langley’s 40 Total Warm Roof Waterproofing systems

Langley Waterproofing Systems Ltd

LABC Langley TA Warm Roof Waterproofing Systems Fact Sheet

LABC Langley TA Warm Roof Waterproofing Systems Fact Sheet

Langley Waterproofing Systems Ltd

This is a fact sheet of our TA Warm Roof Waterproofing Systems.
PC-20 W Paracoat Liquid Roofing System Data Sheet

PC-20 W Paracoat Liquid Roofing System Data Sheet

Langley Waterproofing Systems Ltd

This system is for new build or refurbishment projects (where conditions allow, existing systems can be overlaid, avoiding costly strip-ups). Suitable for all roof decks (timber board requires a nailed attachment layer in accordance with BS 8747:2007).
10/4807_4 Paradiene S/Parafor 40 Roof covering systems

10/4807_4 Paradiene S/Parafor 40 Roof covering systems

Langley Waterproofing Systems Ltd

PQ-20 C Paraquartz Liquid Roofing System Data Sheet

PQ-20 C Paraquartz Liquid Roofing System Data Sheet

Langley Waterproofing Systems Ltd

This system is for projects where a slip-inhibiting finish is required and existing systems are to be overlaid (avoiding costly stripups). Suitable for application to most common deck types and waterproofing, including bituminous felt, mastic asphalt and single ply.
97/3336 Permaquik 6100 Monolithic Hot Melt Roofing System

97/3336 Permaquik 6100 Monolithic Hot Melt Roofing System

Radmat Building Products Ltd

07/4496 Cold fusion built-up bonded roofing systems

07/4496 Cold fusion built-up bonded roofing systems

Sika Liquid Plastics

Wallbarn Catalogue for Pedestals, Decking, Green Roofs, Waterproofing, Geotextile & Drainage

Wallbarn Catalogue for Pedestals, Decking, Green Roofs, Waterproofing, Geotextile & Drainage

Wallbarn Ltd

Full Product Brochure for 2019 - with updated technical data The most extensive pedestals range - for paving and timber decking - on the market. Adjustable pedestals available in heights from 10 mm up to 1020 mm and able to withstand over 2,000kg in weight. Fixed height rubber and plastic discs for paving. See details of M-Tray® green roof system; iDecking superior composite & hardwood decking system; Protecto-board protection membranes; Protecto-drain cavity drainage membranes roof Outlets and geotextile fabrics.
M-Tray B ROOF t4 Classification Report long form

M-Tray B ROOF t4 Classification Report long form

Wallbarn Ltd

VMZINC Roofing + Rainwater Design Specification & Installation Guidelines Dec 20

VMZINC Roofing + Rainwater Design Specification & Installation Guidelines Dec 20

VMZINC UK

The standing seam system consists of a comprehensive range of robust components that ensures appropriate and correct installation is achieved. It is also important that standing seam roofs are installed by properly trained and equipped professionals.
IKO Armourplan P PVC Single Ply Roofing Membrane datasheet

IKO Armourplan P PVC Single Ply Roofing Membrane datasheet

SIG Design & Technology

Available exclusively through SIG Design & Technology, Armourplan P is a robust polyester reinforced mechanically fixed PVC membrane which offers enhanced mechanical properties over standard PVC membranes and is completely UV stable throughout. Armourplan P is a versatile membrane which can be mechanically fixed, adhered or ballasted. It is suitable for a variety of roofing applications on both flat and sloping roofs. All overlaps are heat welded using suitable hot-air welding equipment.
IKO Armourplan G PVC Single Ply Roof Waterproofing datasheet

IKO Armourplan G PVC Single Ply Roof Waterproofing datasheet

SIG Design & Technology

Available exclusively through SIG Design & Technology, Armourplan G membrane is a glass tissue reinforced detailing PVC membrane on Armourplan roof systems. The glass tissue reinforcement offers excellent dimensional stability and flexibility allowing the material to form easily into intricate details ensuring the roof installation is fully waterproofed. All overlaps and joints with are heat welded using suitable hot-air welding equipment. Armourplan G membrane can be used to waterproof the joints between Armourplan membrane coated metal flashing sections and gutter joints or used to form complex details such as pipe penetrations or external corners. Armourplan detailing PVC membrane can also be used to form adhered upstands.
FDT Rhepanol fk PIB Single Ply Roof Membrane Datasheet

FDT Rhepanol fk PIB Single Ply Roof Membrane Datasheet

SIG Design & Technology

Rhepanol PIB single ply is made from polyisobutylene (PIB), a synthetic rubber, and is the only roof membrane currently available with a full Life Cycle Assessment that meets DIN EN ISO 14040 part ff, showing that it has no significant environmental impact at any time between its manufacturer and eventual disposal. Available in two types; Rhepanol fk requires no hot works and is perfect for both new build and refurbishment and can be installed directly over bitumen. Rhepanol fk has a self-sealing edge and gripfix system. In white it maximises energy capture in PV applications.
FDT Rhepanol fk PIB Single Ply Roofing Membrane Brochure

FDT Rhepanol fk PIB Single Ply Roofing Membrane Brochure

SIG Design & Technology

Rhepanol PIB is made from polyisobutylene (PIB), a synthetic rubber, and is the only single ply membrane currently available with a full Life Cycle Assessment that meets DIN EN ISO 14040 part ff, showing that it has no significant environmental impact at any time between its manufacturer and eventual disposal. Available in two types; Rhepanol fk requires no hot works and is perfect for both new build and refurbishment and can be installed directly over bitumen. Rhepanol fk has a self-sealing edge and gripfix system. In white it maximises energy capture in PV applications.
FDT Rhenofol CV PVC Single Ply Roof Waterproofing Datasheet

FDT Rhenofol CV PVC Single Ply Roof Waterproofing Datasheet

SIG Design & Technology

Rhenofol CV single ply is a roofing membrane that features special polyester grid reinforcement. This solution is designed for mechanically fastened roof build-ups without ballast, especially for lightweight roofs. Used in conjunction with FDT standing seam profiles a simulated metal welted seam roof can aesthetically be designed.
FDT Rhepanol hg PIB Single Ply Roofing Membrane Datasheet

FDT Rhepanol hg PIB Single Ply Roofing Membrane Datasheet

SIG Design & Technology

Rhepanol PIB single ply is made from polyisobutylene (PIB), a synthetic rubber, and is the only roofing membrane currently available with a full Life Cycle Assessment that meets DIN EN ISO 14040 part ff, showing that it has no significant environmental impact at any time between its manufacturer and eventual disposal. Rhepanol hg is the perfect solution for every kind of green roof intensive or extensive, or landscaped. Resistant to root penetration without any further sealing where the roofing membrane ends, i.e. at the upper edge, as far as the vegetation is concerned the protection against root penetration starts. The hot air welded seam area is 100% watertight.
IKO Armourplan Walkway PVC Single Ply Roofing Membrane datasheet

IKO Armourplan Walkway PVC Single Ply Roofing Membrane datasheet

SIG Design & Technology

Armourplan Walkway membrane is a 2mm thick anthracite or mid grey coloured PVC walkway membrane available in 1.0m wide x 20m long rolls and is hot air welded to the roof surface in a layout as specified by the client. The chevron patterned walkway membrane provides a slip resistant surface and provides additional protection to the waterproof membrane in areas where mechanical damage is more likely to occur. Armourplan Walkway membrane can be installed over either mechanically fastened or adhered Armourplan roofing systems.
IKO Armourplan PSG PVC Single Ply Roofing Membrane datasheet

IKO Armourplan PSG PVC Single Ply Roofing Membrane datasheet

SIG Design & Technology

Available exclusively through SIG Design & Technology, Armourplan PSG is a glass tissue reinforced polyester fleece backed PVC single-ply roof membrane suitable for use in a wide range of single ply roofing applications on both flat and sloping roofs. Armourplan PSG offers enhanced mechanical properties over standard PVC membranes and is completely UV stable throughout. Armourplan PSG fleece-backed PVC membrane forms a sleek skin on many types of roof application and can be adhered onto most common substrates and is suitable for both new build and refurbishment installations and for specialist applications such as simulated metal roofs.
IKO Armourplan SG PVC single ply roofing membrane datasheet

IKO Armourplan SG PVC single ply roofing membrane datasheet

SIG Design & Technology

Available exclusively through SIG Design & Technology and manufactured in the UK, Armourplan SG is a glass tissue reinforced fleece backed PVC membrane. Armourplan SG sheets are partially or fully bonded to the substrate using Armourplan Contact Adhesive. Lap joints in the sheets are welded with a hot air gun. Armourplan SG fleece backed PVC membrane can be installed onto plywood, OSB / timber boarding, smooth concrete, profiled galvanised steel (with suitable overlay), woodwool slab or PIR Insulation. Armourplan is versatile in either new build or refurbishment, quick and simple to install, covers workmanship in the warranty and is competitively priced. Guaranteed for up to 20 years with BBA life expectancy in excess of 30 years, it offers exceptional mechanical properties.
IKO Armourplan SM PVC Single Ply Roofing Membrane datasheet

IKO Armourplan SM PVC Single Ply Roofing Membrane datasheet

SIG Design & Technology

Available exclusively through SIG Design & Technology and manufactured in the UK, Armourplan SM is a polyester-reinforced PVC single ply roof membrane suitable for use in a wide range of roofing applications on both flat and sloping roofs. The membrane can be installed onto most common substrates and is suitable for both new build and refurbishment installations and for specialist applications such as simulated metal roofs. Armourplan SM can be either mechanically fixed using suitable IKOfix fastenings or fully adhered and forms a sleek skin on many types of roof application. All overlaps are heat welded using suitable hot-air welding equipment. Guaranteed for up to 20 years with BBA life expectancy in excess of 30 years, it offers exceptional mechanical properties.
SIGnature Bitumen Roof Membrane Fire Rated Cap Sheet Datasheet

SIGnature Bitumen Roof Membrane Fire Rated Cap Sheet Datasheet

SIG Design & Technology

Exclusive to SIG Design & Technology, the SIGnature range is a torch-applied built up roofing system for flat and pitched roofs which is robust, tried and tested. Intended for both new work and overlay projects and offering different warranty packages dependent on the underlay option selected. The SIGnature range will ensure that you can tailor the system to your client's requirements, and come in on budget. Designed for new work or overlays, this bituminous roofing system comprises fire rated torch-on cap sheet, underlay and vapour control layer and is suitable for warm or cold roofs. There are three underlay options with the potential for either 20 or 25 year warrantees.
FDT Rhenofol CG PVC Single Ply Roofing Membrane Datasheet

FDT Rhenofol CG PVC Single Ply Roofing Membrane Datasheet

SIG Design & Technology

Rhenofol CG PVC single ply roofing membrane is an attractive and economical flat roof solution that is quick and easy to install. Rhenofol CG is suitable for green roofing as it resists weathering, chemical oxidation, has full FLL certification as a root and rhizome barrier and retains its physical properties over a wide range of temperatures. The membrane is loose-laid and ballasted. With its glass fleece reinforcement, it is non-shrinking and of course root resistant, which will ensure a long life.
The Passive Fire Protection Handbook: Chapter 4 - Ceilings, Floors and Roofs

The Passive Fire Protection Handbook: Chapter 4 - Ceilings, Floors and Roofs

Promat UK

Fire Testing Methods Floors should normally be tested or assessed in accordance with BS 476: Part 21: 1987 and are required to satisfy the three failure criteria of loadbearing capacity, integrity and insulation when exposed to fire from below. Loadbearing concrete floors supported by steel beams and protected with a suspended ceiling should be tested or assessed to BS 476: Part 23: 1987.
The effect of gauge on pre-finished steel roof and wall cladding performance

The effect of gauge on pre-finished steel roof and wall cladding performance

Tata Steel

This Colorcoat® technical paper advises on the relevant standards and tolerances which should be used and how they should be applied. The properties of the profiled pre-finished steel cladding can be affected by the choice of the nominal gauge and the impact of this extends beyond basic structural implications. This technical paper seeks to explain this along with any limiting criteria which must be satisfied. This paper combines knowledge from Tata Steel and the Steel Construction Institute (SCI) with practical considerations from leading pre-finished steel profilers.
Passivent Specification Document - Hybrid Plus Airstract Roof Ventilation Terminal

Passivent Specification Document - Hybrid Plus Airstract Roof Ventilation Terminal

BPD Building Product Design Ltd

Passivent Specification Document - Hybrid Plus Airstract Roof Ventilation Terminal
Topseal Domestic Brochure (GRP) fibreglass flat roofing and waterproofing systems

Topseal Domestic Brochure (GRP) fibreglass flat roofing and waterproofing systems

Topseal Systems Ltd

Topseal brochure of products including available finishes, colours and general information on the different Topseal GRP - Fibreglass systems. Topseal offer a BBA certified range of liquid applied fibreglass (GRP) flat roofing and waterproofing systems under the Topseal brand which can be used for roofing, balconies, pool and pond lining, and green roofs.
Metal roof coating. Metal cladding coating. BBA Approved Metalseal

Metal roof coating. Metal cladding coating. BBA Approved Metalseal

Liquasil Ltd

Metalseal is the BBA Approved metal roof & cladding coating from Liquasil Ltd. Metalseal is a single-coat application in most cases, so reduces labour costs. Made from uniquely hardened silicone, Metalseal resists all fungal growth and environmental dirt pick-up is reduced, resulting in easier cleaning. Available in any RAL colour subject to a minimum project size of just 300 sq metres. Cut edge corrosion is treated as part of this advanced coating system.
Wet Rooms - Modular Wet-Floor

Wet Rooms - Modular Wet-Floor

CCL Building Products Ltd

The Modular Wet-Floor system from CCL Wetrooms allows any size or shape of wet room to be configured on a timber floor. Contemporary linear drainage can be positioned flush against either of the shower walls or centrally within the shower area thanks to the highly flexible nature of the system.

Showing 829-864 of 957

Feedback