NBS Source
List your products

newton waterproofing systems

13,121 results found

Sort by:

Showing 37-72 of 1981

Newton Victron Inverter Range

Newton Waterproofing Systems

The Victron range of pure sine wave Inverters/Chargers provide advanced solutions to ensure that Newton pumping systems continue pumping during power interruption, by inverting 12V DC power from a battery (or multiple batteries) to clean and efficient 230V power.

Newton Control Panel-Pro

Newton Waterproofing Systems

The Newton Control Panel-Pro is a class-leading pump control panel with many unique features, which has been designed by Newton Waterproofing Systems to provide the ultimate in pump operation and diagnostics.

Newton 315 Polymer Waterbar

Newton Waterproofing Systems

Newton 315 Polymer-Waterbar is a hydrophilic, acrylate polymer waterbar, which swells when activated by moisture. It is characterised by high elasticity and high tensile strength. Newton 315 Polymer-Waterbar can be used to seal the structure against water leaks to both cast-in-place concrete and precast construction joints. ACCREDITATIONS & APPROVALS 10 mm and 5 mm profile variants of Newton 315 Polymer-Waterbar are supported by Kiwa BCAC Certificate BCAC-17-002 and is accepted by the NHBC as a suitable waterbar Type B Waterproofing to Grades 1, 2 & 3 - BS 8102:2009.

Newton 803 Damproofing Membrane

Newton Waterproofing Systems

BBA certified, high quality damp proof membrane for use above ground. Can be used as an alternative to Newton 803 Newtonite and 805 Newlath where a meshed surface is not required as a surface for direct plastering or rendering.

Newton High Water Alarm

Newton Waterproofing Systems

The Newton High Level Water Alarm PA50 has been designed to detect high water levels within pump sump chambers and is included within the Newton Titan-Pro and Newton Titan pumping systems. The alarm is battery operated and uses a standard 9V PP3 battery.

Newton 403 HydroBond BDA Certificate

Newton Waterproofing Systems

A high performance, self-healing membrane with a locking fleece on the inner surface and a hydrophilic polymer coating externally. The membrane is BDA approved, NHBC accepted as Type A waterproofing, and the gas barrier variant provides resistance to radon, carbon dioxide and hydrocarbons.

Newton 403 HydroBond Tanking Membrane

Newton Waterproofing Systems

Newton 403 HydroBond is a very high performance composite sheet membrane that features a locking fleece to one side and a polymer hydrophilic coating to the other. When placed below the new raft or against permanent or temporary timber wall formwork, the fibres of the fleece inner core are encapsulated into the concrete, forming a close and intimate bond. The membrane becomes fully-engaged into the concrete to prevent water tracking and is suitable for all belowground and earth-retained structures, ranging from domestic basements to the largest civil engineering projects. The hydrophilic coating expands when in contact with water and seals small holes that may be accidentally formed during fixing of the reinforcing steel or the pouring and compaction of the concrete.

Newton 902-P Data Sheet

Newton Waterproofing Systems

Newton 902-P is a two-part, solvent-free, damp-tolerable, epoxy-based primer which is applied above Newton 901-P pre-primer as a barrier to residual substrate moisture and vapour within concrete and screeds.

Newton 802-DPM Data Sheet

Newton Waterproofing Systems

BBA certified, 100% recycled, 1200 gauge damp proof membrane for use below concrete floors or screeds where no groundwater pressure is expected. Newton 802-DPM is compatible with all common building materials, and suitable for numerous applications as a DPM, vapour barrier, or as a slip membrane, screeding membrane or curing membrane.

Newton 109-LM BDA Certificate

Newton Waterproofing Systems

Radon-certified, flexible, single-component, cold-applied and seamless rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls.

Newton 901-P Data Sheet

Newton Waterproofing Systems

Newton 901-P is a two-part, solvent free, clear epoxy which is applied to damp and porous surfaces as a pre-primer prior to the application of Newton 902-P, a vapour barrier and primer for newly placed, or damp, concrete and screed.

Newton 503 Cavity Drain Membrane

Newton Waterproofing Systems

Newton 503 is a high quality cavity drain waterproofing membrane, supplied in a plain variant for walls and floors and a meshed variant for receiving plaster or render to walls, and used within Newton System 500, our internally applied waterproofing system that includes Newton drainage and pumping systems. Depending on the variant, Newton 503 is suitable for the waterproofing of earth retained walls, vaulted soffits and floors, is guaranteed against deterioration for 30 years, has a life expectancy of at least 50 years (DIN 9001:2000), and is supported by BBA Certification Number 94/3010.

Newton 508 Cavity Drain Membrane

Newton Waterproofing Systems

Newton 508 is a high quality dimpled cavity drain waterproofing membrane, which is supplied in a number of variants for use within Newton System 500, our, internally applied waterproofing system that includes Newton drainage and pumping systems. Depending on the variant, Newton 508 studded membrane is suitable for the waterproofing of earth retained walls, vaulted soffits and floors and is guaranteed against deterioration for 30 years, with a life expectancy of at least 50 years (DIN 9001:2000) and is supported by BBA Certification Number 94/3010.

Newton 301 EasyProof Metal Construction Waterbar

Newton Waterproofing Systems

Newton 301 EasyProof is a coated metal waterbar system used for the sealing of construction joints within retained concrete structures. Newton 301 EasyProof features a flexible, adherent coating on one side, which is covered with a granular material.The rough coating creates a permanent watertight seal with the surrounding concrete to create a waterbar that works immediately, without requiring activation by water as required with hydrophilic waterbars.

Newton 306 SwellMastic Swelling Adhesive Mastic

Newton Waterproofing Systems

Newton 306 SwellMastic is a high-quality, firm, fast-curing, swellable, single-component, polymeric adhesive sealant. The special composition of Newton 306 SwellMastic makes the sealant start to swell when in contact with water (to about 150% of original size). The sealant has high elasticity and high adherence and it develops a strong adhesive tensile strength immediately after application. The first swelling is time delayed which allows Newton 306 SwellMastic to be applied to slightly damp surfaces.

Newton 320-FP Injection Resin Data Sheet

Newton Waterproofing Systems

A foaming polyurethane injection resin that reacts with water to form a rigid, hydrophobic seal against water ingress. The resin reacts quickly with water and expands to produce an open-cell, rigid foam that is ideal for stemming water ingress at defects in concrete structures and steel piled walls.

Newton 420 Reservoir Green Roof Drainage Membrane

Newton Waterproofing Systems

Newton 420 Reservoir is a unique drainage and water-retention membrane for use where a water reservoir is required for extensive green roofs of sedum, herbaceous plants, mosses or grass above decks and roofs. Unlike other products of this type, Newton 420 Reservoir has a bonded geotextile that prevents intrusion of the soil into the water holding cups during back-fill and compression. This results in a permanently larger volume reservoir than any other 20mm-deep green roof membrane. When the water holding cups are full, the large drainage holes within the HDPE core allow water to easily pass through to the drainage layer below to prevent saturation and water logging of the green roof above.

Newton 323-SA Injection Resin Data Sheet

Newton Waterproofing Systems

A four-part acrylic injection resin with a controllable reaction time and low viscosity, making it ideal for sealing fine cracks, wet or dry, deep into the substrate. The resin can also be injected into the Newton 302 InjectionHose system to provide a maintainable Type B waterproofing solution.

Newton 324-SR Injection Resin Data Sheet

Newton Waterproofing Systems

A high performance, five-part injection resin that reacts to create an acrylic-rubber compound with exceptional durability, flexibility and adhesion. These qualities make Newton 324-SR perfect for sealing leaks in structures that are subject to settlement or movement, such as movement joints.

Newton 322-SP Injection Resin Data Sheet

Newton Waterproofing Systems

A two-part, low viscosity injection resin with excellent adhesion, that can be used either to seal fine cracks and joints in reinforced concrete structures, or injected into an injection hose system to seal construction joints and provide a maintainable Type B waterproofing system.

Newton 203-RM High Strength Repair Mortar

Newton Waterproofing Systems

Single-component, fast-setting, Portland cement-based structural mortar, used primarily for the durable repair of concrete. Ideal for roads, runways, bridges, decks, floors and footpaths. Polymer-modified, and fibre-reinforced, Newton 203-RM is physically and chemically compatible with the host concrete, quickly exhibiting high adhesive and compressive strength. As a single component, requiring only the addition of water, the resulting mortar is rapid curing with enhanced polymeric properties and reliable strength development which is not significantly affected by low temperature use. The mortar can be used as supplied up to 100mm deep, or bulked out with clean, washed, sharp sand to form a high performance screed or for floor or deck repairs up to maximum depth of 300mm.

Newton 321-FSP Injection Resin Data Sheet

Newton Waterproofing Systems

A single component polyurethane injection resin that provides a flexible seal in voids and non-structural cracks, or reacts with water to form a flexible, closed-cell foam. The resin is able to seal both pressurised and non-pressurised leaks, whilst its flexibility makes it ideal for applications where movement is expected.

Newton 409 RootBarrier Puncture Resistant Root Barrier Membrane

Newton Waterproofing Systems

Newton 409 RootBarrier is designed to eliminate root penetration. It consists of an impermeable High Density Polyethylene (HDPE) membrane, providing robust root-proof protection to the primary waterproofing membrane to green roofs or planters where intrusive root systems are present. The membrane has high tensile strength and puncture resistance and provides an efficient, reliable and cost effective barrier to provide protection against Japanese Knotweed and other aggressive root systems.

Showing 37-72 of 1981

Feedback