"newton waterproofing systems"
867 results found
Relevance
Showing 1-36 of 183
Newton Basedrain TDS
Newton Waterproofing Systems
Newton Basedrain is the drainage system used most commonly within the Newton CDM, ‘Type C’, cavity drain waterproofing
system
Newton Control Panel-Pro TDS
Newton Waterproofing Systems
The Newton Control Panel-Pro is a class-leading pump control panel with many unique features, which has been designed by Newton Waterproofing Systems to provide the ultimate in pump operation and diagnostics.
Newton PAC-500 System Overview
Newton Waterproofing Systems
The Newton PAC-500 System is combined 'Type C' (BS 8102:2022) cavity drain waterproofing and ground gas mitigation system, developed by Newton Waterproofing Systems and Prestige Air Ltd. The addition of the PAC Positive Air Curtain to the Cavity Drain Waterproofing provides protection against water, gasses and hydrocarbon vapours from the ground within a single internally applied system.
This system provides basement waterproofing across all environmental grades (Grade 1-3) in accordance with BS 8102:2022, as well as a ground has mitigation system that is integrity tested with tracer gas to confirm viability.
Newton CDM 508 TDS
Newton Waterproofing Systems
Newton CDM 508 is a high quality cavity drain waterproofing membrane, supplied in a number
of sizes and in 500g/m2 and 700g/m2 variants for use within the Newton CDM System, our internally applied waterproofing system that also includes drainage and pumping systems.
Newton Titan-Pro Pump System
Newton Waterproofing Systems
The Titan-Pro Pumping System is designed to be used specifically with our Cavity Drain waterproofing system. It includes features and components for connection with Cavity Drain Waterproofing drainage products.
The unique design provides simple connectivity and ease of installation when used with the Newton drainage products; Newton Basedrain and Newton Floordrain, as part of the Newton System 500 waterproo ng system. The sump chamber is designed to have all the inlet and outlet connections to be always at the same height relative to the Newton drainage products.
Newton Complete Guide To Waterproofing 2018
Newton Waterproofing Systems
The Newton complete guide to waterproofing includes solutions for new and existing structures. It is comprehensive, includes case studies, product information, the British Standard requirements, grades and types of waterproofing, combination systems, as well as technical help and advice.
Newton CDM 520 eco Floor TDS
Newton Waterproofing Systems
Newton CDM 520 eco is a high quality and 100% recycled cavity drain floor membrane, for use within the Newton CDM System, our internally applied waterproofing system that also includes drainage and pumping systems.
Diasen WATstop TDS
Newton Waterproofing Systems
Diasen WATstop is a three-component, fibre-reinforced cement/epoxy product that, when mixed, produces a workable mortar suitable for surface repair and surface smoothing. With the addition of up to 40% water, a paint/slurry-like consistency can be achieved that is suitable for numerous applications including the damp proofing of walls and slabs and the waterproofing of concrete structures, as well as being a primer for a number of Newton System 100 Liquid Waterproofing products.
Newton NP750 TDS
Newton Waterproofing Systems
The Newton NP750 is a high performance ground and clean water pump. The NP750 is available as an automatic pump or as a manual pump for use with our pump control systems. The NP750 is available as pump only, or as a key component in our Newton Titan-Pro packaged pump systems.
Newton CDM Basedrain TDS
Newton Waterproofing Systems
The drainage system comprises of a range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Sump System or safe drainage (drainage that is below the level of the basement floor that cannot back up or block):
Basedrain - Drainage conduit for the perimeter of the area to be waterproofed, that is situated at the base of the wall membrane
Floordrain - Drainage conduit for collection of water at the construction joint to the floor and to replace Basedrain
at door thresholds. Floordrain is also used to connect the perimeter Basedrain to the sump
Corner - Formed 90 degree corner
Basedrain T-Piece - Formed T for a 90-degree connection to the Floordrain from the Basedrain
Newton NewSeal 409 Root Barrier
Newton Waterproofing Systems
Newton 409 RootBarrier is designed to eliminate root penetration. It consists of an impermeable High Density Polyethylene
(HDPE) membrane, providing robust root-proof protection to the primary waterproofing membrane to green roofs or
planters where intrusive root systems are present. The membrane has high tensile strength and puncture resistance and provides an efficient, reliable and cost effective
barrier to provide protection against Japanese Knotweed and other aggressive root systems.
Newton 503 & 503 Mesh Membranes TDS
Newton Waterproofing Systems
CDM 503 Membrane is a high quality cavity drain waterproofing membrane, supplied in a plain
variant for walls and floors and a meshed variant for receiving plaster or render to walls, and
used within Cavity Drain Waterproofing, our internally applied waterproofing system that includes
Newton drainage and pumping systems. Depending on the variant, CDM 503 Membrane is suitable
for the waterproofing of earth retained walls, vaulted soffits and floors, is guaranteed against
deterioration for 30 years, has a life expectancy of at least 50 years (DIN 9001:2000), and is
supported by BBA Certification Number 94/3010.
Newton Pump Controller TDS
Newton Waterproofing Systems
The Newton Pump Controller is designed to be used with matched pairs of Newton NP400, NP400W, NP750 or SP750C Cutter manual pumps and provides a sophisticated, yet simple to install, twin pump control system which offers some of the features of the Newton Control Panel-Pro, but at a much lower cost.
Newton NP750W Pump TDS
Newton Waterproofing Systems
The Newton NP750W is a high head and high performance effluent pump for the removal of waste water from the Newton Titan-Pro sump chambers or formed concrete chambers.
Newton HydroBond 108-LM Membrane TDS
Newton Waterproofing Systems
Newton HydroBond 108-LM is a cold spray-applied, seamless, rubber waterproofing membrane for the external waterproofing of basements and foundation walls. Normally specified as part of our HydroBondTM System in conjunction with HydroBond 403 Plus, the membrane can also be used on its own, terminating to raft or strip foundations.
108 HydroBond-LM is very quick to apply, at up to 1000m2 per day, and is not subject to the delays normally associated with liquid membranes as it can be applied in cooler and damper conditions and in most cases without a primer.
Newton Titan TDS
Newton Waterproofing Systems
Compact Pumping Systems
Newton NP400 TDS
Newton Waterproofing Systems
A high head and high to medium performance pump. The NP400 is available as an automatic pump, or as a manual pump for use with our pump control systems.
Newton DAB E.Box TDS
Newton Waterproofing Systems
The DAB E.Box is an electronic control panel for the protection and automatic operation of one or two submersible pumps installed in domestic, civil and industrial environments. The panel is best paired with dual Newton SP sewage pumps within sewage and foul pumping systems – it is simple to install and provides a robust solution for sewage pumping systems, enclosed in an IP55 rated casing.
Newton-High Water Level Alarm
Newton Waterproofing Systems
The Newton High Level Water Alarm PA50 has been designed to detect high water levels within pump sump chambers and is included within the Newton Titan-Pro and Newton Titan pumping systems. The alarm is battery operated and uses a standard 9V PP3 battery.
Newton CDM 508 Mesh Membrane
Newton Waterproofing Systems
BBA certified, 8mm meshed cavity drain membrane for basements – Suitable for use internally below the ground to retaining walls and vaulted soffits.
Newton CDM 508 Mesh Membrane is the most commonly used meshed membrane within our Newton CDM System that includes Newton drainage and pumping systems.
Newton CDM 508 Mesh Membrane is guaranteed against deterioration for 30 years, with a life expectancy of at least 50 years (DIN 9001:2000) and is supported by BBA Certification Number 94/3010.
Newton SP750 Cutter TDS
Newton Waterproofing Systems
The Newton SP750 Cutter is a high quality sewage pump, incorporating a tungsten carbide tipped cutting impeller that rotates against a serrated suction cover in order to cut solid waste before pumping, resulting in a much lower risk of blockage than similar sized vortex impeller pumps.
Newton NP400W TDS
Newton Waterproofing Systems
Effluent Pump Medium head and medium performance pump for dishwasher, washing machine, bath/shower waste (not sewage)
Newton Newtonite TDS
Newton Waterproofing Systems
Non-Meshed Damp Proofing Membrane
Newton HydroBond 403 Plus
Newton Waterproofing Systems
A high-performance, self-healing membrane with a locking fleece on the inner surface and a hydrophilic polymer coating externally. The membrane is BDA approved, NHBC accepted as Type A waterproofing, and the gas barrier variant provides resistance to radon, carbon dioxide and hydrocarbons.
HydroBond 403 Plus provides a complete waterproof envelope to the structure to achieve Type A (barrier) waterproofing suitable for Grades 1, 2 and 3 as defined by BS 8102:2022, are suitable for all below ground and earth-retained structures from domestic basements to the largest civil engineering projects, and can be used as part of the HydroBond® System with HydroBond 108-LM which is sprayed to the exposed walls of the basement after the temporary formwork is removed.
Newton HydroCoat Tanking Slurry SDS
Newton Waterproofing Systems
Newton HydroCoat Tanking Slurry Safety Data Sheet
Newton HydroBond 109-LM TDS
Newton Waterproofing Systems
HydroBond109-LM is a flexible, single-component, cold-applied, seamless rubber waterproofing membrane with a number of uses for the external waterproofing of basements, foundation walls, decks, and flat roofs. HydroBond 109-LM is also adept
as a detailing membrane for the termination and jointing of other Newton waterproofing products, and with its very high adhesive properties it is the perfect primer for adhesion of butyl products to concrete and mortar.
Applied by brush, roller or airless spray machine, HydroBond 109-LM can be applied in cool and damp conditions and without a primer.
DAB E.Box
Newton Waterproofing Systems
Sewage Pump Control Panel
Newton Titan-Pro Pump System TDS
Newton Waterproofing Systems
The Titan-Pro packaged sump system is designed specifically to be used with Newton System 500.The adjustable neck allows for the sump to be installed at a fixed height relative to the slab.
Newton FlexProof 106 TDS
Newton Waterproofing Systems
Highly advanced single component liquid waterproofing material, which forms an elastomeric polymer membrane that is rainproof in minutes and capable of handling severe building movements and deformations.
The FlexProof 106 System is composed of two variants of the product, plus ancillaries:
X1 – A thixotropic variant that is applied as a paste and so is suitable as a surface sealant over joints.
NV – A lower viscosity variant that can be poured and is typically used within movement joints.
FlexProof 106 Primer (Product code: 916) – Improves adhesion to porous surfaces.
FoamStop (Product codes: FS1 to FS8) – Foam backing rod for movement joints.
The animation to the right shows the correct application of FlexProof 106-X1 to a concrete construction joint.
Oldroyd Xtf TDS
Newton Waterproofing Systems
Fire Resistant Tunnel Waterproofing Membrane
HydroBond SA TDS
Newton Waterproofing Systems
Type A Self-Adhesive Waterproofing Membrane
Newton Titan Operating Manual
Newton Waterproofing Systems
Compact Pumping Systems
Newton Titan-S TDS
Newton Waterproofing Systems
Surface Water Pumping System
Newton Trojan pro TDS
Newton Waterproofing Systems
Foul & Surface Water Pumping System
Newton HydroBond 314 Bentonite Granules
Newton Waterproofing Systems
HydroBond 314 Bentonite Granules is a naturally occurring sodium bentonite granules used for detailing to the Newton HydroBondTM System, specifically where HydroBond 403 Plus terminates to otherwise difficult to detail building elements, such as piled walls, support piles, pile caps, and protrusions through the membrane.
HydroTank 308 Stopaq
Newton Waterproofing Systems
Newton 308 Stopaq is a single component highly flexible compound used for the sealing of conduit and pipes through service duct sleeves. The product is incredibly effective at sealing around numerous services within the sleeve, even where
significant water ingress exists.
The unique compound never cures, remaining permanently flexible, allowing for new services to be simply pushed through the existing repair and resealed.
Showing 1-36 of 183