NBS Source
List your products

newton waterproofing systems

13,240 results found

Sort by:

Showing 1-36 of 1960

Newton 104 Crystalline Waterproofing Of Concrete

Newton Waterproofing Systems

Newton 104 is applied to the surface of concrete to provide in-depth protection against the movement of moisture through the capillaries and hairline cracks within the concrete. It consists of Portland cement, specially treated quartz sand and a compound of active chemicals. Newton 104 is supplied in powdered form and is either sprinkled onto fresh concrete or is mixed with water as a carrier and brush applied as a slurry for application to fully cured or older concrete or vertical surfaces.

Newton Complete Guide To Waterproofing 2018

Newton Waterproofing Systems

The Newton complete guide to waterproofing includes solutions for new and existing structures. It is comprehensive, includes case studies, product information, the British Standard requirements, grades and types of waterproofing, combination systems, as well as technical help and advice.

Newton 308 Stopaq Service Duct Waterproofing

Newton Waterproofing Systems

Newton 308 Stopaq is a single component highly flexible compound used for the sealing of conduit and pipes through service duct sleeves. The product is incredibly effective at sealing around numerous services within the sleeve, even where significant water ingress exists. The unique compound never cures, remaining permanently flexible, allowing for new services to be simply pushed through the existing repair and resealed.

Newton 107F Cementitious Flexible Waterproofing Membrane

Newton Waterproofing Systems

Newton 107F is a two-component, cementitious, polymer-rich coating for the waterproofing and protection of concrete and masonry. Capable of withstanding heads of water pressure to 10 bar, both positively and negatively. Newton 107F is ideally suited to the waterproofing of reservoirs, tunnels, water tanks, basements, podium decks, at roofs, balconies and terraces, and is especially capable where the structure has both masonry and concrete elements where differential movement is expected.

Newton 110 WATstop Cement Waterproofing and Surface Repair

Newton Waterproofing Systems

Newton 110 WATstop is a three-component, fibre-reinforced cement/epoxy product that, when mixed, produces a workable mortar suitable for surface repair and surface smoothing. With the addition of up to 40% water, a paint/slurry-like consistency can be achieved that is suitable for numerous applications including the damp proofing of walls and slabs and the waterproofing of concrete structures, as well as being a primer for a number of Newton System 100 Liquid Waterproofing products.

Newton 109-LM Flexible Rubber Waterproofing Membrane

Newton Waterproofing Systems

Newton 109-LM is a flexible, single-component, cold-applied, seamless rubber waterproofing membrane with a number of uses for the external waterproofing of basements, foundation walls, decks, and flat roofs. Newton 109-LM is also adept as a detailing membrane for the termination and jointing of other Newton waterproofing products, and with its very high adhesive properties it is the perfect primer for adhesion of butyl products to concrete and mortar. Applied by brush, roller or airless spray machine, Newton 109-LM can be applied in cool and damp conditions and without a primer.

Newton PAC-500 System Overview

Newton Waterproofing Systems

The Newton PAC-500 System is combined 'Type C' (BS 8102:2009) cavity drain waterproofing and ground gas mitigation system, developed by Newton Waterproofing Systems and Prestige Air Ltd. The addition of the PAC Positive Air Curtain to the System 500 waterproofing provides protection against water, gasses and hydrocarbon vapours from the ground within a single internally applied system. This system provides basement waterproofing across all environmental grades (Grade 1-3) in accordance with BS 8102:2009, as well as a ground has mitigation system that is integrity tested with tracer gas to confirm viability.

Newton 108 HydroBond-LM Sprayable Rubber Waterproofing Membrane

Newton Waterproofing Systems

Newton 108 HydroBond-LM is a cold spray-applied, seamless, rubber waterproofing membrane for the external waterproofing of basements and foundation walls. Normally specified as part of our HydroBondTM System in conjunction with Newton 403 HydroBond, the membrane can also be used on its own, terminating to raft or strip foundations. 108 HydroBond-LM is very quick to apply, at up to 1000m2 per day, and is not subject to the delays normally associated with liquid membranes as it can be applied in cooler and damper conditions and in most cases without a primer.

NEWTON 103-S High Performance Liquid Waterproofing Membrane

Newton Waterproofing Systems

Newton 103-S is a two component, thixotropic, cementitious modified polymer waterproofing membrane with high adhesion, designed for the internal and external waterproofing of concrete and steel elements of water-retaining and water-resisting structures such as reservoirs, water tanks, below ground structures, podium decks and parking areas.

Newton 106 Highly advanced single component liquid waterproofing

Newton Waterproofing Systems

Newton 106 FlexProof is a highly advanced, single component, waterproofing compound for the waterproofing of joints that is supplied in two variants: Newton 106 FlexProof-X1 is a highly viscous, thixotropic paste that is suitable for the waterproofing of construction and vertical movement joints, whilst Newton 106 FlexProof-NV has a lower viscosity and so is pourable and better suited where the application is to horizontal movement joints. Both variants form an elastomeric polymer that is rainproof in minutes and capable of handling severe building movements and deformations.

Newton 603

Newton Waterproofing Systems

Newton 603 is a high quality flooring membrane suitable for use above new and existing floors. The 3mm studs allow for pressure equalisation of dampness within the floor below allowing for dissipation at room perimeter and subsequent drying of the floor.

Newton Basedrain

Newton Waterproofing Systems

Newton Basedrain is the drainage system used most commonly within the Newton System 500 waterproofing system. It compromises a range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Sump System or safe drainage

Newton 410 Geodrain

Newton Waterproofing Systems

Newton 410 GeoDrain is a two-core drainage sheet consisting of a non-woven, geotextile filter layer, thermally welded to a water impermeable HDPE (High Density Polyethylene) drainage membrane.

Newton SP750 Cutter

Newton Waterproofing Systems

The Newton SP750 Cutter is a high quality sewage pump, incorporating a tungsten carbide tipped cutting impeller that rotates against a serrated suction cover in order to cut solid waste before pumping, resulting in a much lower risk of blockage than similar sized vortex impeller pumps.

Newton NP750 Pump

Newton Waterproofing Systems

The Newton NP750 is a high performance ground and clean water pump. The NP750 is available as an automatic pump or as a manual pump for use with our pump control systems. The NP750 is available as pump only, or as a key component in our Newton Titan-Pro packaged pump systems.

Newton Pump Controller

Newton Waterproofing Systems

The Newton Pump Controller is designed to be used with matched pairs of Newton NP400, NP400W, NP750 or SP750C Cutter manual pumps and provides a sophisticated, yet simple to install, twin pump control system which offers some of the features of the Newton Control Panel-Pro, but at a much lower cost.

Newton Titan-Pro

Newton Waterproofing Systems

The Titan-Pro packaged sump system is designed specifically to be used with Newton System 500.The adjustable neck allows for the sump to be installed at a fixed height relative to the slab.

Newton 313 WaterPlug

Newton Waterproofing Systems

Fast Setting Polymer Compound to Seal Leaks Newton 313-WP WaterPlug is a fast setting, polymer compound that instantly stops running water or seepage through masonry or concrete substrates.

Newton 314-BG

Newton Waterproofing Systems

Newton 314-BG Bentonite Granules is a naturally occurring sodium bentonite granules used for detailing to the Newton HydroBondTM System, specifically where Newton 403 HydroBond terminates to otherwise difficult to detail building elements, such as piled walls, support piles, pile caps, and protrusions through the membrane.

Newton 408 DeckDrain

Newton Waterproofing Systems

Newton 408 DeckDrain is a double cuspated, deck and flat roof drainage membrane, that incorporates a polypropylene geotextile filter layer, bonded to a water impermeable HDPE (High Density Polyethylene) core. The double cuspated design provides two layers of drainage; allowing for primary drainage through the geotextile filter, as well as secondary drainage between the underside of 408 DeckDrain and the primary waterproofing layer. The lower drainage layer eliminates the risk of trapped water, a problem associated with conventional single cuspated deck drainage membranes.

Newton 807 BKK

Newton Waterproofing Systems

A transparent, colourless wall coating, water and siloxane based, ideal to protect porous walls of various substrates from wind-driven rain. After treatment, the wall is deeply impervious to water ingress and so better protected against frost damage. The treated wall will continue to dry and vapour drive is not effected due to the coating being very vapour permeable.

Newton 701-HB

Newton Waterproofing Systems

High Build Epoxy Floor Coating Two-component solvent free epoxy resin based floor coating developed to provide protective and decorative properties to concrete, steel and other substrates.

Newton 803 Newtonite

Newton Waterproofing Systems

BBA certified damp proof membrane, comprising of high density polyethylene membrane with a rot-proof polythene mesh that is heat-welded during the manufacturing process to the surface of one side. The meshed surface creates a mechanical key to allow the membrane to be plastered, rendered or to receive dot & dab plasterboard.

Newton 806 CWC

Newton Waterproofing Systems

A white thermal coating for cold and poorly insulated surfaces. It contains specific mineral powders which, thanks to their insulating features, warm the surface of the treated wall.

Newton 805 Newlath

Newton Waterproofing Systems

An internally applied, composite damp proof membrane comprising of high-density polypropylene membrane with a rot-proof polythene mesh heatwelded during the manufacturing process to the surface of one side. The meshed surface creates a mechanical key to allow the membrane to be plastered, rendered or to receive dot & dab plasterboard.

Newton 520 eco

Newton Waterproofing Systems

Newton 520 eco is a cavity drain waterproofing membrane made from recycled High Density Polyethylene (HDPE). It is one of the main constituent parts of Newton System 500, our BBA Certified, Type C cavity drain system, used for waterproofing of floors within earthretained structures, that includes drainage channels sited below the membrane for increased drainage capacity. With its 20 mm deep stud profile, Newton 520 eco is used within Newton System 500 as a high drainage capacity floor membrane and is generally specified where it is anticipated that there may be a risk of severe water penetration.

Newton CP Pumps

Newton Waterproofing Systems

The Newton CP250, CP400 and CP750 are a range of high quality clean water pumps. Ideally suited for the removal of ground water from basements and cellars. Sold in manual and automatic versions and can be purchased as pumps only, or as a key component in our packaged pumping systems.

Newton Titan-Pro

Newton Waterproofing Systems

The Titan-Pro Pumping System is designed to be used specifically with our Newton System 500 waterproofing system. It includes features and components for connection with Newton System 500 drainage products. The unique design provides simple connectivity and ease of installation when used with the Newton drainage products; Newton Basedrain and Newton Floordrain, as part of the Newton System 500 waterproo ng system. The sump chamber is designed to have all the inlet and outlet connections to be always at the same height relative to the Newton drainage products.

Newton 315 Polymer Waterbar

Newton Waterproofing Systems

Newton 315 Polymer-Waterbar is a hydrophilic, acrylate polymer waterbar, which swells when activated by moisture. It is characterised by high elasticity and high tensile strength. Newton 315 Polymer-Waterbar can be used to seal the structure against water leaks to both cast-in-place concrete and precast construction joints. ACCREDITATIONS & APPROVALS 10 mm and 5 mm profile variants of Newton 315 Polymer-Waterbar are supported by Kiwa BCAC Certificate BCAC-17-002 and is accepted by the NHBC as a suitable waterbar Type B Waterproofing to Grades 1, 2 & 3 - BS 8102:2009.

Showing 1-36 of 1960

Feedback