"fibre reinforcement for concrete"
2,568 results found
Relevance
Showing 37-72 of 88
Cembrit Fibre Cement Slate Ridge
Swisspearl
Fibre Cement Slate Ridge Brochure
Sustainable Resilience for Reinforced Concrete Structures (Parking Structures / Multi-Storey Car Parks)
C-Probe Systems
A PDF, which includes case studies, casting a spotlight on corrosion management for parking structures. Many ageing parking structures are not properly serviced and maintained, causing disruption and closure. C-Probe Systems can offer low carbon, smart products that create a Corrosion Management System (CMS) for the protection and service life tracking for both multi-level and underground
parking with buildings above, helping to extend their service life and increasing durability.
The PDF looks closely at the use of LoCem® +chase® which is a low carbon cement alternative (AACM), that also acts as an ICCP anode for reinforced concrete structures.
Reinforcing Bar Couplers
Leviat
For many years the use of mechanical couplers to join reinforcing bars has been regarded as a means of reducing the use of long bars. Engineers and contractors now recognise the benefits of using couplers to accelerate the speed of construction, increase productivity and simplify design details.
The Ancon range of reinforcing bar couplers is the most comprehensive available and includes tapered threaded, parallel threaded and mechanically bolted couplers.
MOY Reinforced Bitumen Waterproofing Brochure
MOY
MOY Reinforced Bitumen Waterproofing Brochure
Jordahl Punching Shear Reinforcement JDA
J & P Building Systems
JORDAHL® Punching Shear Reinforcement - JDA comprises of double-headed reinforcement anchors that are factory-welded to carrier rails. Installed into the concrete from above, the units are positioned in floor slabs and foundation slabs to distribute punching shear loads above column or pile locations.
Typically supplied in two to five stud configurations, JDA units replace the need for drop beams or closely spaced traditional link reinforcement. This reduces cost and reinforcement congestion. ETA-13/0136
Licata Repair 250 N
Licata Building Systems Ltd
Thixotropic, structural, fibre-reinforced polymer-modified cement mortar, certified in accordance with the UNI EN 1504-2 standard and classified R3 in accordance with the UNI EN 1504-3 standard, with controlled hygrometric shrinkage, specifically designed for restoration, protection and skim coating of concrete for applications at a thickness of between 5 and 30 mm.
MP541 - POLY ENCLOSED GLASS FIBRE ROLL
Mayplas
MP541 - Poly Enclosed Glass Fibre Roll technical data sheet
Masonry Reinforcement and Windposts
Leviat
Large panels of masonry or panels with openings can often be difficult to justify structurally. The traditional solutions have been to either increase the thickness of the wall or introduce an additional masonry pier.
Ancon AMR Bed Joint
Reinforcement and Ancon
Windposts are designed to provide
additional lateral support for panels
of masonry. Windposts can be
installed into either the inner leaf of
blockwork or into the cavity leaving
the blockwork undisturbed. Ancon
AMR is a fabricated and flattened
stainless steel or carbon steel
reinforcement which locates in the
bed joint to strengthen a wall.
Parapet Posts are used as vertical
support for brickwork in parapet
panels.
Cembrit Patina, Rough - fibre cement rainscreen cladding
Swisspearl
Both Cembrit Patina & Cembrit Patina Rough 'A' fire rated rainscreen facade panels exhibit the natural characteristics of fibre cement. The boards have the appearance of concrete but with the unique textural delicacy of fibre cement.
Each board is unique and their visual appearance is bought to life as the weather and lighting conditions change offering the facade an unparalleled,
dynamic visual appeal. Cembrit Patina boards are available in two natural
finishes; textured and sanded surface (Cembrit Patina) and a new velvety and structured surface (Cembrit Patina Rough).
Technical Information Schock Isokorb T for reinforced concrete structures
Schöck Ltd
Load-bearing thermal insulation element for the effective
reduction of thermal bridges in cantilevered structural
elements such as balconies, access balconies and parapets.
Bauder 110g Reinforcement Fleece
Bauder Ltd
Polyester reinforcement fleece used in conjunction with Bauder LiquiTEC products to provide strength and allow elasticity of the membranes without splitting.
Reinforcement in the Bauder LiquiTEC Roof, Detail and Balcony Systems. It is suitable for use in cold roof, warm roof, and inverted applications.
Armaload Bearing Pad - DLW66 & DLW66XP
Armatherm, a Brand of Armadillo Noise & Vibration Limited
Armaload DLW66 Load Bearing Pads are used extensively in standard construction applications, precast and prestressed concrete bridges, buildings and structural steel bearing applications, as well as machinery, equipment foundation, railway tie pads and shock and vibration isolation.
DLW66 Load Bearing Pads are made from masticated elastomer which is fully cured and fibre reinforced.
Reinforcing Large Format Stack-Bonded Masonry - Ancon AMR Masonry Reinforcement
Leviat
Where large format masonry units are stacked one above the other, the lack of bonding between them will greatly reduce the overall flexural strength of the panel and the ability of the wall to spread vertical loads.
Ancon AMR Masonry Reinforcement, located in the bed joints, will increase the panel’s flexural strength and improve the capacity to resist lateral loads and spread vertical loads.
Masonry reinforcement ladder rack 30w60
Tec-Ties Ltd
Masonry reinforcement ladder rack 30w60
Westerland - Fibre Cement Slate
Swisspearl
Fibre cement slate; Westerland slate has an appearance very close to that of natural slate. Its attractive riven surface and natural dress edges make it an ideal solution for situations where a traditional appearance is important. It is manufactured to the highest European standards and is lightweight, pre-holed, suitable for all types of projects, easy to handle and install, durable and an economic alternative to natural roofing materials.
Shearfix Punching Shear Reinforcement
Leviat
Used within a slab to provide additional reinforcement around columns, Ancon Shearfix is the ideal solution to the design and construction problems associated with punching shear. The system consists of double-headed studs welded to flat rails, positioned around the column head or base.
RonaBond Concrete Cover 150
Ronacrete Ltd
RonaBond Concrete Cover 150 is a coating designed to improve equivalent concrete cover to reinforcement. A 4mm layer provides 150mm equivalent concrete cover providing corrosion protection to steel reinforcement thus extending the life of the concrete. RonaBond Concrete Cover 150 is supplied as a pre packed material comprising liquid and powder. It is mixed to form a slurry which is applied by brush or roller at a thickness of approximately 0.5mm per coat on a vertical surface. The cured coating can be left as the finished surface or overcoated with a pigmented anti-carbonation coating such as RonaBond Crack Bridging Anti-Carbonation Coating WB or RonaBond Anti-Carbonation Coating WB.
RonaBond Concrete Repair Mortar
Ronacrete Ltd
RonaBond Concrete Repair Mortar is a prepacked, ready to use mortar for concrete repair and is used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces. RonaBond Concrete Repair Mortar is used to repair and replace concrete damaged as a result of spalling through reinforcement corrosion, freeze/thaw cycling, impact or other damage.
Brochure - C Deck cement fibre decking
Wallbarn Ltd
C Deck cement fibre decking board brochure - part of a full non-combustible Class A decking system
Licata Repair 400 C
Licata Building Systems Ltd
Repair 400 C is a single-component, pre-mixed, controlled shrinkage cement mortar with aca stable and pliable, super-fluid, self-compacting texture, made with high resistance hydraulic binders, selected aggregates, special additives and HP fibres, for the reconstruction or cross-section increase of reinforced concrete structures, for in-ground fixing of re-bars, anchor rod sand fixing castings.
CB Coupler Box and CS Coupler Strip Reinforcement Continuity Systems
Leviat
Ancon CB Coupler Boxes simplify the continuity of reinforcement at concrete construction joints. They allow engineers to design slab-to-wall connections without the traditional restrictions on bar length and bar diameter of re-bend/pull-out continuity systems and help contractors to eliminate manual bar straightening on site.
Weber Concrete Repair and Protection
Saint-Gobain Weber
Reinforced concrete can be a highly durable
structural material requiring little or no
maintenance. However, it is now recognised that
without correct design, mixing, placement and
curing, the durability of reinforced concrete may
be impaired. The repair of concrete structures
has long been a key activity in the construction
industry and Weber products have been
specified as a solution for over 50 years.
Now the causes of concrete decay are
better understood, it is clear that if more care
had been taken at the time of construction by
following good practice and using better quality
materials then far fewer repairs would be
necessary now.
Licata Fibre Glass Mesh
Licata Building Systems Ltd
Licata Mesh 160 (certified according to ETAG 004) and 200, alkali resistant fibre glass mesh, meets the maximum safety
requirements about crack-resistance and resistance to shock.
POLYDAN Reinforced Bituminous Membranes
Danosa UK Ltd
Commonly known as roofing felt, our range of POLYDAN® systems are specially formulated polymer
modified reinforced bitumen roofing sheets. POLYDAN® membranes are comprised of 3 key components:
a polymer modified bitumen compound, a reinforcement layer, and a variety of upper and lower surface
finishes. As well as traditional gas-torch applied membranes, our POLYDAN® systems include a range of
thermo-adhesive underlays to ensure a Safe2Torch specification.
Concrete Blocks Brochure
Thomas Armstrong (Concrete Blocks) Ltd
A comprehensive product and technical brochure for all concrete blocks within our range including Ultralite, Insulite, Dense Concrete and Airtec aerated concrete blocks.
Contains solutions for meeting thermal, acoustic and structural regulations as well as detailed guidance for working with our blocks and applying finishes.
ParaFlex G120 Polyester Fleece Reinforcement
Radmat Building Products Ltd
ParaFlex G120 Polyester Fleece Reinforcement Product Data Sheet Feb 2023
Diasen WATstop TDS
Newton Waterproofing Systems
Diasen WATstop is a three-component, fibre-reinforced cement/epoxy product that, when mixed, produces a workable mortar suitable for surface repair and surface smoothing. With the addition of up to 40% water, a paint/slurry-like consistency can be achieved that is suitable for numerous applications including the damp proofing of walls and slabs and the waterproofing of concrete structures, as well as being a primer for a number of Newton System 100 Liquid Waterproofing products.
Concrete Floor Tiles Brochure
LIVING CONCRETE LTD
Living Concrete offers a range of bespoke concrete tiles.
Our BTX Ultra High Performance Concrete floor tiles offer a stylish and contemporary alternative to ceramic or porcelain tiles. They are easy to install and can be used in commercial spaces such as retail units, hospitality venues, offices and showrooms, as well as at the home.
Living Concrete’s tiles are of the highest quality and designed to last. Each piece we produce is treated with a specialist hydrophobic impregnate and surface sealant. This protective layer prolongs the life of the tile while helping to maintain colour and prevent staining from sunlight, water and food.
Topflow horizontal self compacting concrete for lewis deck applications
Tarmac
Tarmac Topflow Horizontal – Lewis® concrete is a free-flowing self-compacting concrete, containing specially selected 10mm aggregates, macro synthetic fibres and shrinkage reducing admixtures to produce a pumpable, self-smoothing, flowing concrete (manufactured to BS:EN 206 and to specific requirements of Lewis® Deck dovetail sheeting).
2083 - Living Concrete Slip Resistance Testing of “ Granite Concrete Tile ”
LIVING CONCRETE LTD
TEST REPORT: HSE Slip Resistance Testing (Laboratory) Performed on a Sample of “ Granite Concrete Tile ”
ParaFlex G165/225 Polyester Fleece Reinforcement
Radmat Building Products Ltd
ParaFlex G165/225 Polyester Fleece Reinforcement Feb 2023
Concrete Wall Panels Brochure
LIVING CONCRETE LTD
Living Concrete’s GRC High Performance Concrete wall panels offer a stylish and contemporary alternative to ceramic, porcelain or stone tiles. They are easy to install and can be used both internally and externally in commercial spaces such as retail units, hospitality venues, offices and showrooms, as well in residential projects.
Living Concrete’s panels are of the highest quality and designed to last. Each piece we produce is treated with a specialist hydrophobic impregnate and surface sealant. This protective layer prolongs the life of the panel while helping to maintain colour and limit staining from sunlight, water and food. Each concrete panel varies in shading and striation so no two are exactly the same, making every arrangement unique.
Verge Reinforcment
ABG
Reinforcement & Seperation
ABG
A guide to the design and selection of ABG Geogrids and Geotextiles.
TOPROC SY (SCRAP YARD) high abrasion and impact resisting concrete
Tarmac
TOPROC SY (SCRAP YARD) is a high abrasion, impact resisting, high performance concrete specifically designed for aggressive environments Toproc SY is a high performance, fibre hybrid, concrete containing both micro synthetic and steel fibres for improved impact resistance and toughness. As with the entire Toproc range of concretes, Toproc SY is a very cohesive concrete with a dense micro structure imparting benefits including high strength, low permeability and increased durability. This makes it suitable for challenging environments like: container handling areas, metal recycling and waste recycling centres and loading bays.
Technical Digest - Concrete & Anti-Carbonation Protection
Keim Mineral Paints Ltd
A major factor in concrete decay is carbonation, caused by Carbon Dioxide (CO2) in the atmosphere reducing the alkalinity of concrete. This in turn results in reinforcing steel becoming susceptible to attack by water and oxygen, causing corrosion of the steel and eventually spalling of the concrete. Sulphates from vehicle exhausts and chlorides from de-icing salts also contribute to concrete degradation.
Showing 37-72 of 88