NBS Source
List your products

cemex

98 results found

Sort by:

Showing 1-36 of 53

CEMEX Pavebase - Technical Datasheet

CEMEX UK

STREETPAVE PaveBase silo, bulk and 25kg bag bedding materials are designed to comply with the requirements of BS 7533 pavements constructed with clay, natural stone or concrete pavers

CEMEX UK -Product Guide

CEMEX UK

With over 100 years experience and over 60,000 employees in more than 50 countries, CEMEX is one of the world’s leading suppliers of building materials. In the UK, we are a leading supplier of ready-mixed concrete, mortar, screed, aggregates, asphalt and cement. We have a significant share of the roof tile and concrete block markets, and we are the leading supplier of concrete sleepers to the rail industry. We also offer surfacing solutions.

CEMEX Pavegrip - Technical Datasheet

CEMEX UK

STREETPAVE PaveGrip is a high-performance priming and bonding mortar specially designed for natural stone and pre-cast concrete paving units, for use in bonded/rigid construction in commercial and public area projects.

Sustainable solutions from CEMEX Concrete Products

CEMEX UK

Our range of Concrete Block Permeable Paving (CBPP) has been designed to allow rainwater falling on the surface to pass through the subgrade or drainage system below in a controlled manner, all our permeable paving can be used in conjunction with a Sustainable Urban Drainage System (SUDS) to reduce flooding and protect our environment. When packaging our products the majority of our ReadyPave ® range use 100% recycled banding. Our objective is for all sites to use banding that is 100% recycled

Marine Aggregate Solutions

CEMEX UK

Aggregates from the seabed satisfy a significant and expanding proportion of the UKs requirement for these most fundamental of construction materials. Over 20% of the nations demand for sand and gravel is now met by marine aggregates and CEMEX UK Marine Limited is one of the countrys leading exponents of sourcing and supplying these materials

Mortar Colour Guide

CEMEX UK

Cemex produces a full range of factory-produced colour Mortar products, ensuring that whatever the aesthetic requirements of your project, Cemex has a Mortar product tailored to suit

Multistore - Agricultural Concrete

CEMEX UK

Readymix Multistore is a high strength durable and load bearing concrete for use on internal concrete floors for general and specific storage requirements. With a good structural design and the use of Readymix Multistore a hygienic cleanable storage facility can be created providing a barrier between ground water and the stored material. This is essential in meeting current legislation and quality assurance scheme

Permaflow - Permeable by Design

CEMEX UK

With paved surfaces all around us, the new Permaflow range addresses the building and construction industry need for a permeable concrete product that can be used in large areas of surfacing and minimises water run-off. Surface water management, including the laying of Permaflow, can help prevent possible flash flooding and pollution of the water table, rivers and streams. Research has indicated that extreme summer rainfall may become more frequent in the UK, highlighting a continued growing need for Sustainable Urban Drainage Systems (SUDS) to be an integral part of any development. Permaflow has been designed to have a network of interconnecting voids which allow water to free-flow through the product to the level of the water table.

Permatite - Integral Waterproof Concrete

CEMEX UK

CEMEX Permatite is a type B integral waterproofingsystem manufactured by CEMEX utilising Fosroc's state of the art waterproofing technology. The product is manufactured in closely controlled, quality assured Ready-Mix plants and is readily available from all of our 240 locations.

Permaflow Technical Datasheet

CEMEX UK

Permaflow is a pervious concrete mixture, carefully designed to have a network of interconnecting voids which allow the movement of water, providing the optimal solution for surface and storm water management.

Readymix Flooring

CEMEX UK

Readymix Flooring is available for two specific flooring standards – Readymix Flooring (U) for unreinforced floors and Readymix Flooring (R) for reinforced steel flooring applications

Promptis - Rapid Hardening Concrete

CEMEX UK

In an ever more demanding and extremely competitive environment, with tight deadlines and even tighter margins, speed and efficiency which save time are critical. Promptis, from CEMEX, is a new rapid hardening concrete solution that can help save valuable hours.

Supaflo TS-20 - High Quality Thin Screed for Bonded & Unbonded Applications

CEMEX UK

Supaflo TS-20 is a thin section screed based on an anhydrite binder. It is formulated to provide a strong and durable, thin topping to solid internal substrates such as, in situ concrete slabs, beam and block sub floors and precast concrete planks. When tested for in situ crushing resistance to BS8204:1:2003 Supaflo TS-20 achieved Category A. Supaflo TS-20 can be installed to a minimum thickness of 20mm which improves drying times compared to traditional screeds and enables the finished flooring to be installed sooner. Supaflo TS-20 is ideally suited to projects where available height and or permitted loading are extremely restricted. For example, a situation that might previously have used smoothing compounds to provide a

Stockfloor - Agricultural Concrete

CEMEX UK

Readymix Stockfloor is a durable, hard wearing concrete designed to satisfy the standards of hygiene in livestock housing including the Food Safety Act and Quality Assurance schemes and makes selection of the appropriate product simple, yet effective

Viapave - Polymer Modified Thin Surface Asphalt System

CEMEX UK

Want to create Britain's toughest road? then look no further! VIAPAVE® utilises a high performance polymer modified bitumen to provide outstanding durability in even the most highly challenging applications. Designed to keep Britain's drivers safe, VIAPAVE® has a highly skid resistant surface and also reduces spray in wet conditions.

Screed Solutions

CEMEX UK

Cemex Sand Cement screeds are branded as Readyscreed and include Readyscreed Original, Reinforced and Early Strength. Other permutations can be designed to suite specific applications such as SBR. All Readyscreed products are available in several strengths. With cement contents equal to volumetrically proportioned mixes 1:3, 1:4 and 1:5 (eg 1 part cement to 4 parts sand). Sand Cement screeds supplied by CEMEX are Factory Produced and Quality Controlled, they and delivered to site ready to use and retarded for one working day. All constituents comply with the current British and European Standards, thus, providing our customers with a Quality Assured product over and above that available from site mixing which often contain constituents of varying amount and quality and are mixed in a

Porofoam - Foamed Concrete

CEMEX UK

Porofoam is a range of low density foam concretes designed specifically for voidfill, stabilisation and other lightweight applications.

Readymix Foundation

CEMEX UK

Readymix Foundation is a versatile, economical and durable concrete that is designed specifically for use in foundations and groundwork for house, garage and conservatory applications. Other uses include foundations for outbuildings and supporting structures such as retaining walls |and terraces

Supaflo HTC - High Thermal Conductivity Flowing Screed

CEMEX UK

Supaflo HTC is a self compacting flowing screed based on an anhydrite binder. It is specifically intended for use with underfloor heating systems and is formulated to provide a floor with higher thermal conductivity when compared to traditional cement, sand screed and regular flowing screed. Supaflo HTC is for use with both warm water and electric underfloor heating systems that use conventional heating sources and renewable technologies. A screed with higher thermal conductivity will heat up and cool down more rapidly providing greater system control and improve comfort levels.

Viaflow

CEMEX UK

Viaflow is a porous asphalt available for use in Base, Binder Course and Surface Course pavement layers. It may be used as part of a designed SUDS (Sustainable Urban Drainage System) which are designed to dissipate surface water through the material to a suitable drainage system. Viaflow is most commonly used in conjunction with a free draining sub-base, and carefully selected geotextiles,geogrids and/or geomembranes

Supaflo Summit - Flowing Screed for High Rise Applications

CEMEX UK

Supaflo SUMMIT is a self compacting flowing screed based on an anhydrite binder. It is specifically formulated to provide a strong and durable levelling screed for high rise applications for example where there is a requirement to pump the screed above 10 floors. It is important that the correct pump and hoses are used for each project; very high level applications, greater than 30 floors may require specialist equipment and or the services of an experienced high level pumping contractor.

Thermoform - Insulated Concrete Forms

CEMEX UK

TIMS (Thermally Insulated Modular System) is a next-generation version of building with Insulated Concrete Forms. With the growing need for more houses in the UK it is important that developers & contractors are able to rely on a building method which allows them to gain scale & improve the overall quality of their built stock, without being exposed to the pressures of the ongoing supply chain and labour shortfalls. CEMEX in collaboration with UNiBLOCK offer Thermoform, a sustainable construction solution which is designed to be installed faster than traditional building routes & at a significantly lower labour cost

Supaflo Timbre - Flowing Screed for Acoustic & Non-Acoustic Flooring Systems

CEMEX UK

Supaflo TimBRE is a self compacting flowing screed based on an anhydrite binder. It is manufactured in a quality assured process using specialist binder and selected aggregate. It is specifically intended for use in acoustic and non acoustic flooring systems which use timber joists as their primary supporting structure. Supaflo TimBRE can be used with either warm water or electric underfloor heating systems in both commercial and residential developments. Its use will help to improve the acoustic performance of the floor to meet or exceed the requirements set out in Part E of the building regulations. Supaflo TimBRE will also improve the environmental, fire resistance and durability characteristic and provide timber supported floor that feels like concrete.

Readymix Paving

CEMEX UK

Readymix Paving is a strong and durable concrete that’s perfect for use in outdoor paved areas such as driveways, paths, patios, and pavements. Containing specially formulated admixtures it has been designed to withstand freeze-thaw damage in winter conditions. A high quality concrete, it can be finished in a variety of ways to offer a textured or smooth surface. Readymix Paving can also be laid to slopes and drainage falls.

Supaflo - Technical Datasheet

CEMEX UK

Cemex Supaflo is a self-compacting pumpable screed based on a calcium sulfate binder. Supaflo has been developed over many years and is at the forefront of screed technology. It provides significant beenfits over traditional cementitious screeds to the extent that in some European countries over 50% of all screeds used are of this type. The advantages over traditional floor screed include speed of application - leading to a redution in labour cost and increased site/logistical efficiency, attainable accuracy of placement and finishing, reduction in thickness and elimination or substantial reduction of movement joints and elimination of curling and lifting at slab/bay joints and edges.

Microtech - High Performance Concrete

CEMEX UK

When you are placing conrete in harsh conditions where aggressive chemicals or high levels of abrasion are present then you need a high performance concrete that can provide the highest levels of durability and technical performance. Cemex Microtech is a range of advanced concretes, carefully formulated with microsilica and the latest admixture technology to produce high high performance concretes with exceptional levels of durability in the harshest of environments.

Supaflo TS-15 - Ultra Thin Screed for Bonded & Unbonded Applications

CEMEX UK

Supaflo TS-15 is a thin section screed based on an anhydrite binder. It is formulated to provide a strong and durable, ultra-thin topping to solid internal substrates such as, in situ concrete slabs, beam and block sub floors and precast concrete planks. When tested for in situ crushing resistance to BS8204:1:2003 Supaflo TS-15 achieved Category A. Supaflo TS-15 can be installed to a minimum thickness of 15mm which improves drying times compared to traditional screeds and enables the finished flooring to be installed sooner.

Dry Silo Mortar

CEMEX UK

CEMEX Dry Silo Mortar is made up of precisely weighed materials to produce the best quality mortar. Prepared in purpose built production units, the mortar has a guaranteed strength content and controlled air content. The system also accurately monitors the addition and mixing of pigments, for consistent colour throughout the mix. Masonry mortars are manufactured to the requirements of BS EN 998-2 and are registered under the CE marking scheme. Mixes can be supplied in a full range of strength classes and colours to meet precise requirements. Since all products comply with relevant British and European standards, with CEMEX Dry Silo Mortar you get total quality from the outset.

Advanced Decking - Fibre Reinforced Concrete for Composite Metal Decking

CEMEX UK

In an increasingly competitive environment and with tighter margins, speed and efficiency are key facets for achieving successful projects, in conjunction with providing a solution to satisfy the highest demands of the client. Cemex, in conjunction with Propex have developed Advanced Decking a fibre reinforced concrete for use on composite metal decking systems, eliminating the need for steel mesh. This delivers a significant reduction in reinforcement costs as well as faster and easier placement.

Insularis - Comfort by Design

CEMEX UK

Novel concrete technologies combined with a unique product development approach that offers solutions that improve thermal insulation and acoustic performance of concrete. A solution based on a construction system that consists of 100% ready-mix concrete designed to improve the energy efficiency of buildings: thermal insulation properties superior to conventional concrete and effective in the reduction of thermal bridges.

Supaflo Range

CEMEX UK

CEMEX Readymix produce an extensive range of high quality, ready to use screed products, covering a wide variety of applications including traditional and flowing methods. All of our products are designed with the final surface finish in mind and are tailored to meet the specific needs of our customers.

Showing 1-36 of 53

Feedback