"breather membrane"
435 results found
Relevance
Showing 37-56 of 56
Intelligent Membranes Company Brochure 2023
Intelligent Membranes
Intelligent Membranes Company Brochure 2023
Novia 1200 Gauge Polythene Vapour Control Layer
Novia Ltd
Novia 1200 VCL is a high specification, blown polythene material, suitable for use as a vapour control layer within the walls of frame constructions, or where control of the passage of water vapour is required.
This product also performs the additional function of an air-leakage barrier, to prevent losses due to unwanted convection flows. We advise the use of Novia butyl and metallised BOPP tapes to ensure a complete barrier integrity throughout the entire life of the product. Novia 1200 VCL should be used in combination with Novia breather membranes to provide an air-tight and vapour resistant system.
Novia 1200 VCL is fully CPR compliant and is CE Approved to EN 13984:2013.
Intelligent Membranes Airtight Fleece Tape COSHH Sheet
Intelligent Membranes
Intelligent Membranes Airtight Fleece Tape COSHH Sheet
Intelligent Membranes Airtight Fleece Tape Install Guide
Intelligent Membranes
Intelligent Membranes Airtight Fleece Tape Install Guide
Vent3 Breather Datasheet
Cromar Building Products
Datasheet
Windstopper Extreme; Fire reisistant /sheathing/partition board
Swisspearl
A2-s1-d0 fire rated sheathing board; Cembrit Windstopper Extreme is a vapour permeable cement based building board, which can accept insulation being placed against the board on the warm side of the building, whilst acting as a fire break against any blaze in the ventilation cavity behind the rainscreen.
Cembrit Windstopper Extreme has been tested to BS EN 1364-1:2015 (BS 476-22:1987).
As part of a non-load bearing vertical building element it will provide 120/120 minutes of fire resistance when exposed to fire from one side and can be exposed the external conditions for up to 12 months with no breather membrane required.
Novia 500 Gauge Polythene Vapour Control Layer
Novia Ltd
Novia 500 Gauge VCL is a blown polythene material suitable for use as a vapour control layer within the walls of frame constructions, or where control of the passage of water vapour is required.Novia 500 Gauge VCL is fully CPR compliant and is CE Approved to EN 13984:2013.
This product also performs the additional function of an air-leakage barrier, to prevent losses due to unwanted convection flows. We advise the use of Novia double sided butyl and metallised BOPP tape to ensure a complete barrier integrity throughout the entire life of the product. Novia 500 Gauge VCL should be used in combination with Novia breather membranes to provide an air-tight and vapour resistant system.
Visqueen CM8 Membrane
Visqueen
Wall Cavity Drain Membrane
Visqueen CM20 Membrane
Visqueen
Floor cavity drain membrane
2D Drawings
Intelligent Membranes
The Range of Intelligent Membranes on different substrates
Intelligent Membranes Airtight Fleece Tape Technical Data Sheet
Intelligent Membranes
Intelligent Membranes Airtight Fleece Tape Technical Data Sheet
BBA Certificate 21/5951 - Effisus Ecofacade Envelope FR
EFFISUS
Third Party Certification of Effisus Ecofacade Envelope FR: Effisus Breather FR externally + Effisus Vapour FR internally
BBA certification 21/5951 attest the quality of the solution for UK region climate.
We would like to highlight is that was assessed not only the membranes but all the ancillary items (tapes, adhesives, sealants, primers, etc.) required for a complete installation that meet the requirements on a façade project. This is such important aspect!
Currently there any other solution Class A1 membrane or Class A2 complete system with BBA certificate.
Passivhaus Certification
Intelligent Membranes
Passivhaus Certification of Passive Purple liquid Airtight vapour control membrane.
0.03ach
Stucanet 80 E-BM (Stainless steel) Product Data Sheet
Bekaert
Bekaert Stucanet® 80 E-BM is
a purpose designed plaster and
render carrier manufactured from
a stainless steel welded wire mesh
into which a moisture absorbent
sheet of chip paper is interwoven.
The chip paper assists with the
wet adhesion and curing of the
mortar and the perforations allow
the mortar to perfectly bond around
the steel wires, resulting in firm
anchoring of the mortar and high
resistance to load and impact.
Stucanet® 80 E-BM has solid flat
wires incorporated to increase the
stiffness of the panel.
Stucanet® 80 E-BM is used
specifically for exterior façade
applications. It has the same
wire structure as Stucanet® 80,
but is protected with a breather
membrane to prevent moisture
penetration whilst still allowing the
wall to breathe naturally.
Stucanet S E-BM (Stainless steel) Product Data Sheet
Bekaert
Bekaert Stucanet® S E-BM is a
purpose designed plaster and
render carrier manufactured from
a stainless steel welded wire mesh
into which a moisture absorbent
sheet of chip paper is interwoven.
The chip paper assists with the
wet adhesion and curing of the
mortar and the perforations allow
the mortar to perfectly bond around
the steel wires, resulting in firm
anchoring of the mortar and high
resistance to load and impact.
Stucanet® S E-BM has two parallel,
round fixing wires.
Stucanet® S E-BM is used
specifically for exterior façade
applications. It has the same
wire structure as Stucanet® S,
but is protected with a breather
membrane to prevent moisture
penetration whilst still allowing the
wall to breathe naturally.
Stucanet S HG-BM (Galvanized) Product Data Sheet
Bekaert
Bekaert Stucanet® S HG-BM is
a purpose designed plaster and
render carrier manufactured from
a heavy galvanized steel welded
wire mesh into which a moisture
absorbent sheet of chip paper is
interwoven.
The chip paper assists with the
wet adhesion and curing of the
mortar and the perforations allow
the mortar to perfectly bond around
the steel wires, resulting in firm
anchoring of the mortar and high
resistance to load and impact.
Stucanet® S HG-BM has two
parallel, round fixing wires.
Stucanet® S HG-BM is used
specifically for exterior facade
applications. It has the same
wire structure as Stucanet® S,
but is protected with a breather
membrane to prevent moisture
penetration whilst still allowing the
wall to breathe naturally.
Stucanet 80 HG-BM (Galvanized) Product Data Sheet
Bekaert
Bekaert Stucanet® 80 HG-BM is
a purpose designed plaster and
render carrier manufactured from
a heavy galvanised steel welded
wire mesh into which a moisture
absorbent sheet of chip paper is
interwoven.
The chip paper assists with the
wet adhesion and curing of the
mortar and the perforations allow
the mortar to perfectly bond around
the steel wires, resulting in firm
anchoring of the mortar and high
resistance to load and impact.
Stucanet® 80 HG-BM has solid flat
wires incorporated to increase the
stiffness of the panel.
Stucanet® 80 HG-BM is used
specifically for exterior façade
applications. It has the same
wire structure as Stucanet® 80,
but is protected with a breather
membrane to prevent moisture
penetration whilst still allowing the
wall to breathe naturally.
Passive Purple External LABC
Intelligent Membranes
External airtight waterproof membrane
Intelligent Protect
Intelligent Membranes
spray applied window and façade membrane. leave on for 18 months externally and 24 months internally.
Goes on
Concrete
Glass
Aluminium
UPVC
Brochure - Protection membranes and geotextile fabrics
Wallbarn Ltd
Semi flexible bitumen based protection boards for tanking and waterproofing membranes. easy to install, can be bonded to compatible membranes. ideal for vertical and horizontal surfaces.
Geotextile fabrics for landscaping, membrane protection, filtration and separation; for use in groundworks, in subterranean drainage and protection installations; as filtration fabrics in water treatment sectors; and as protection layers for waterproofing membranes.
A range of fixings and anchors for sheet membranes including dimpled drainage membranes, geotextiles and insulation boards.
Showing 37-56 of 56