NBS Source
I'm a manufacturer

"window film"

901 results found

Sort by:

Showing 73-108 of 308

Sponsored
Trinity Primary Academy

Trinity Primary Academy

TRC Windows

TRC was appointed as principal contractor by Barker Associates in May 2019, to carry out specialist sash window restoration works.Trinity Primary Academy is a primary school located in Bounds Green Road, Wood Green, London. It was built in 1899 by Mitchell and Butler and consists of yellow brick and red brick dressings, tiled roofs, irregular fenestrations, and sash windows that give away its Queen Anne Revival style. It's currently categorised as a Grade II Listed building with Historic England, and is part of the Academies Enterprise Trust.Nature of the worksAs the building was Grade II listed, timber window repairs had to be sympathetic and complementary to the historic nature of the property. Many of the existing timber sash windows were inoperable due to the build-up of decorative coatings, timber degradation, and defective and broken sash window ironmongery, as well as opening mechanisms. The requirement was for the windows to be fully refurbished, repaired and operational as originally intended, but also modified to meet health and safety requirements.Phase one of the refurbishment of 200 sash and timber casement windows commenced on the area needing most attention: the west elevation of the building. Following the success of phase one, the client team extended TRC’s appointment to continue around the remainder of the building, systematically completing all other windows, door and roof light refurbishments.This overall refurbishment project included:Stripping back the existing paint from the historic sash windows and repairing any decayed timber.Repairing glazing as and where necessary.Improving the thermal and acoustic containment by installing draughtproofing.Repainting windows and installing ironmongery.Undertaking brick and stone repairs to the building’s exterior.This project also required our specialist attention on some specific areas of traditional glazing. This aspect of the project required the repair and refurbishment of all four oriel bay windows and the oriel bay glazed roofs. Completion included the supply and fixing of new safety glazing and hardwood timber roof rafters, along with the repair and refurbishment of the two existing openable roof lights. The supply and fixing of new code 4 lead flashing, with lead wedges, was also carried out and fully pointed with the correct cement mortar at the wall abutment.Additional detailed work throughout the project included the following:Removal of all existing fitted window blinds for refixing upon completion of works.Removal and repair of existing window ironmongery, including original mechanical winding gear, solid bar opening mechanisms, locking fasteners, slide bar restrictors, cable restrictors, handles and stays.Careful removal and repair of all internal fixed-glazed hopper units, casements and pivot openings.Removal and replacement of all cracked and broken glazing, and replacement of the existing Georgian wired-glazing, with 6mm safety glass or 4mm polished plate glass to areas up to 1.2m height from floor level. Where privacy was required, white opaque glass with thickness in accordance with above was used.Removal and replacement of all loose and defective glazing putties, and removal of all flaking, loose and built-up paint coatings.Exposure of all timber rot and decay ready for repair with Repair Care Systems products, followed by sanding and priming ready for decoration.Vertical sliding sashes repaired, refurbished and rehung on new sash cords and weights, and adjusted as needed. Sashes were routed to accept new brush pile weather stripping. New parting beads and staff beads were serviced with brush pile weather stripping where appropriate.Final internal and external decoration was carried out using Dulux or Leyland trade paints, allowing for one undercoat and one gloss finish.
Sponsored
Redfern House

Redfern House

Crittall Windows Ltd

A prestigious refurbishment contract in Manchester illustrates the appeal of Crittall Steel windows across different sectors. The Redfern building dates from 1936 when it was built for the Co-Operative Wholesale Society. Contractor Russells has upgraded the 60,000sq ft, six storey, brick-clad building originally designed by WA Johnson and JW Cropper and described as being in the Dutch brick modernism style. Crittall W20 windows were specified to replace the original steel fenestration, the new windows boasting frames even more slender than what had been, installed originally, thereby allowing more daylight to enter the offices and new retail units.
Sponsored
Bolsover Model Village

Bolsover Model Village

TRC Windows

The Grade II listed village of New Bolsover, near Chesterfield, was built in 1891 to house local workers. Terraced houses and community buildings were constructed around a central communal square. In 2015, supported by Heritage Lottery funding, Bolsover District Council initiated a project to upgrade all 194 two and three-bedroom homes. We were commissioned to manufacture and install 504 heritage casement windows and 691 heritage box sash windows, with architects Halsall Lloyd Partnership stipulating that they must closely match the original. All the windows are softwood with hardwood sills; and include approximately 12,000 individual Slimlite double glazed panels.
Sponsored
Ultimate Rose - Robinson Home

Ultimate Rose - Robinson Home

Roseview Windows

Located in Surrey, this detached Victorian property needed its top floor timber windows replaced due to rotting. Maintaining the windows was proving costly for the homeowners but they needed a solution that would still look authentic next to their ground floor timber sash windows. After researching their options, the homeowners came across Roseview’s traditional timber alternative sash windows. The possibility of maintenance-free sash windows that are indistinguishable from the original box sashes, but while providing modern thermal efficiency and enhanced security, made Ultimate Rose the obvious choice. Using modern technology, Ultimate Rose is completely seamless with traditional joinery style mechanical joints and the slimmest 35mm mid rail on the market. When installed adjacent to the homeowner’s original windows it was almost impossible to see a difference. The home was finished with a single vertical astragal bar to match the home’s existing sightlines and allow for maximum natural light. Additionally, run through horns and a wood grain texture was added for a fully authentic finish. The result is truly indistinguishable, and the homeowners now have traditional and modern performing sash windows that will last for years to come. The owners are now planning to replace the timber windows on the ground floor with Ultimate Rose as well.
Sponsored
Royal Academy of Arts

Royal Academy of Arts

TRC Windows

TRC was recommended by Julian Harrap Architects, thanks to our successful work at Cliveden House.The two-and-a-half-year project involved a thorough refurbishment of 150 sash windows, including sash window repairs, draughtproofing, and provision of ironmongery. We also applied high-performance secondary glazing to a further 52 windows.We also supplied and installed two large, uniquely designed roof lights to a challenging design specification. Due to the value of the artwork and its sensitivity to light, these needed to conform to exacting standards of security of spectral data.MAIN CONTRACTOR- JOHN SISK & SONSLIGHTING CONSULTANT - ARUP ARCHITECTUREARCHITECT - SIR DAVID CHIPPERFIELD - JULIAN HARRAPPROJECT VALUE - £1.2M
Sponsored
Douay Martyrs Catholic School

Douay Martyrs Catholic School

TRC Windows

TRC been appointed by Morgan Sindall Construction to design, supply and install double glazed, factory finished heritage casement windows to match the already existing windows at the school.Douay Martyrs Catholic School is another of many UK schools to benefit from the Government financed window replacement scheme.The listed school in Uxbridge, Greater London, has had 105 high spec Heritage Casement Windows installed as part of the Department of Educations bid to refresh and revitalize schools across the UK.We were tasked to design, supply and install the heritage windows whilst making sure to maintain the heritage look and feel of the already existing windows throughout the building.We have a huge amount of experience and expertise in restoring and breathing new life into schools, hospitals and other significant public buildings, with Douay Martyrs Catholic School being one of six school projects that TRC has completed since the ease of 2021’s COVID restrictions.Heritage Casement windows are one of the most popular window styles in the UK. They’re easy to use and allow for optimum airflow for great temperature control. The challenge is that listed buildings are required by law to maintain the original look as much as possible.The windows installed had to comply with the following specification requirements:16mm Slim light Krypton filled Heritage sealed units of Ug=1.5w/m²K24mm Solid BarGlazed using Heritage PuttySapele Hardwood
Sponsored
The Gateway Student Accommodation

The Gateway Student Accommodation

Epwin Window Systems

Nearly 600 PVC-U tilt-turn windows in the Profile 22 system were chosen for The Gateway, a £22million student accommodation in Lincoln. The tilt-turn windows were fabricated by Profile 22’s Approved Window Contractor, Polar Windows, using the fully chamfered system, foiled with smooth finish RAL 7016 Anthracite grey as a special order to colour match the aluminium design scheme. The work was carried out in line with strict deadlines, and the project was completed in good time ready for the beginning of the academic year.
Sponsored
Roscoe Building, Manchester University

Roscoe Building, Manchester University

TRC Windows

Built in 1964, the Roscoe Building is the hub of the Faculty of Science at Manchester University. Designed by Cruickshank and Seward, it was named after 1860s Professor of Chemistry, Henry Roscoe. In 2009 we supplied the replacement windows for a refurbishment project undertaken by architects Farrell & Clark. The original windows were of German origin and advanced for their time: center pivot windows, to maximize light in the laboratories. To keep a consistent look we supplied the same style of windows but aluminium clad on the external face for ease of maintenance; and double glazed for energy efficiency.
Sponsored
Clement EB20 steel doors and windows look spectacular in this country home.

Clement EB20 steel doors and windows look spectacular in this country home.

Clement Windows Group

A catastrophic fire meant the original property at this site was uninhabitable and beyond repair. Planning permission was granted for a new house to be built, of a similar size, but different proportions. The new home has been exquisitely designed to be in keeping with the natural surrounding landscape and the traditional building that was there previously.Clement was delighted to be chosen to manufacture bespoke steel windows and doors for all elevations of the property. The EB20 range with multi point locking was specified. Offering elegant slim frames, a high level of thermal efficiency and when combined with multi point locking, it meets the enhanced security standard - PAS24.Attention to detail was crucial on this project, not least because of all the different leaded light designs on the steel doors and windows. In total 38 windows and 14 sets of steel doors were manufactured, all power coated RAL 7016 Anthracite Grey (matt). Beautiful Eaton and Kensington handles were chosen to complement the fenestration which were all painted to match the frames. Jon James, Contracts Manager at Vale Southern said:“The new steel windows and doors are a major feature of this stunning property; in line with the rest of the building they are of a very high standard. Clement have stuck to the various time scales and have helped us with any issues that have arisen after. We have worked together on a few projects now and have been pleased with their service.”
Sponsored
The Didsbury Centre

The Didsbury Centre

Velfac Windows

Sector: Built-to-rent accommodation (mix of affordable and commercial rental)Client: Populo LivingArchitect: dRMMMain contractor: Bugler Developments Specified for:Good cost / quality ratioSustainable window frame constructionFaçade-specific performanceExcellent design supportThe Didsbury, in London’s East Ham, is a high quality ‘Built-to-Rent’ development offering an equal mix of affordable and market rent apartments. Designed by Stirling Prize-winning architects dRMM for Newham’s housing company Populo Living, and built by main contractor Bugler, The Didsbury comprises 148 apartments in two six-storey new-build blocks which sit south of the former East Ham Town Hall Annexe, which is being refurbished. Smart interior design is matched by a highly distinctive exterior featuring brick and gold clad facades. VELFAC 200 windows, patio doors and entrance doors are installed in every apartment to provide both a quality finish and impressive low energy and low maintenance performance. Windows, doors and Juliette balconiesEvery apartment features a combination of VELFAC windows and patio doors (leading to a balcony or terrace) and inward opening, tilt/turn VELFAC IN glazed doors. These are used to create Juliette balconies, with balcony fittings integrated within the VELFAC frame to simplify subsequent railing installation. As every apartment features a range of interior materials, inner VELFAC timber frames are painted white to create a neutral and low maintenance finish ideal for rented apartments. External aluminium frames are finished in a dark grey polyester-powder coating to complement to both the brick walls and gold cladding. VELFAC also supplied head pressings to match the window sills, thereby ensuring a neat and consistent finish at both top and bottom. Our ‘go to’ composite glazing brandHaving successfully used VELFAC products on earlier projects dRMM was happy to specify the system for The Didsbury: ‘VELFAC has become our ‘go to’ brand when specifying composite glazing,’ says Findlay McFarlane, Architect at dRMM. ‘The system offers a good cost to quality ratio, and the frame design results in low embodied carbon, primarily due to the percentage of recycled aluminium used. This was important for Populo Living’s sustainability targets, and for dRMM as we champion climate-conscious architecture and the use of natural wood, which again is a feature of the VELFAC frame.’ Main contractor Bugler Developments was also happy with the specification: ‘We knew from the outset that we would be using the VELFAC system, and as we had used it before we knew it would meet our client’s requirements,’ comments Thomas Bugler, Head of Marketing. First discussed in 2015, The Didsbury has been a long and complex build. VELFAC, however, is one of the few suppliers to remain with the project from start to finish, thanks to the quality of the system and the expertise provided at every stage build. ‘We liaised with VELFAC right from the start of the project, through the detailed design stage, procurement and eventually to installation on site, with amendments and updates included along the way when necessary,’ says Thomas. ‘The project’s sustainability and affordability targets became more challenging due to this long planning phase,’ adds Findlay, ‘but the VELFAC system continued to meet the specification as it evolved.’ Technical support above and beyondWhile The Didsbury’s minimalist exterior may look sleek and simple, specification was in fact very complex, comments Findlay, and required expert input from the VELFAC team: ‘The stepped façade and variety of façade-specific performance targets meant that not all floors had an identical specification,’ he explains. ‘In addition, while VELFAC double glazing met all low energy targets, we needed to fit acoustic trickle vents into road-facing windows and ensure lower floors and balconies had windows with Secured by Design accreditation.’ Issues regarding weathering within the gold cladding also needed attention, comments Thomas: ‘This required some on site consultation with the VELFAC team, and updated detailing to ensure the end result was compliant and of the right quality - we are very pleased with the finish, and the windows and doors work well within the overall development.’ In fact, VELFAC support made a significant contribution to the success of the whole project says Findlay: ‘We worked closely with VELFAC on detailed drawings for the windows and doors, and were impressed with the level of support provided – more than that typically provided by a supplier, and another reason why we like to use the VELFAC system when we can. The thoroughness of the detailing meant there were fewer surprises when it came to installation, helping us keep on schedule during the final build and installation phase.’
Sponsored
Profile 22’s Optima windows and doors selected for care home and assisted living apartments

Profile 22’s Optima windows and doors selected for care home and assisted living apartments

Epwin Window Systems

Over 300 Optima casement windows and 60 doors from Profile 22 were used in a new 85-bed care home and 45 assisted living apartments in Sutton Coldfield. Background The Sutton Rose development in Boldmere, Sutton Coldfield is a new build 85-bed care home with 45 assisted living apartments. The developer is renowned for delivering exceptional quality projects, which means suppliers have to meet exacting standards and quality specifications. The window and door contract were awarded to Sutton Designs in Kingstanding, Birmingham, with manufacturing undertaken by Profile 22’s Approved Commercial Manufacturer, Central Window Systems in West Bromwich. The two companies had worked on previous care projects, which meant that as well as being able to demonstrate their ability to meet the tender requirements for this project they also brought a proven track record. The window specification The window and door system specified for the project was award-winning Optima from Profile 22, a fully-integrated 70mm system which offers a step-change in advanced window design. The high-specification system comes with an impressive set of credentials and design flexibility to meet all commercial project requirements. In this project, all windows were fitted with open-out restrictors for the safety or the residents and all window and doors needed to comply with fire and smoke escape protection measures. Optima offers market-leading structural strength and high-security features and casement windows are PAS24:2016 approved as standard which was important to meet the project specification. The windows and doors were manufactured in Anthracite Grey on White to match other developments in building contractor’s portfolio and create a sleek, modern aluminium aesthetic. A carefully managed installation process Sutton Designs is an experienced new build and commercial window installation company and has worked with Central Window Systems for over three years. The two companies worked in close partnership to ensure all windows and doors were manufactured and installed to the required timescales. The project was completed during the Covid-19 pandemic, which meant appropriate health and safety considerations also needed to be taken into account. An impressive new elder care development The completed project will provide modern and well-equipped homes for the residents. Jon Gregory, Owner of Sutton Design concluded: “The quality of Optima from Profile 22 and the commercial expertise of Central Window Systems were fundamental to the project’s success. This is a very impressive development and we were delighted to have been part of its construction.” For more information on the Profile 22 range, please visit www.profile22.co.uk or call 0808 101 4143.
Sponsored
35 Old Queen Street

35 Old Queen Street

TRC Windows

TRC Windows were awarded the contract by Oakdean Construction, for the supply, design and installation of fully glazed and factory finished Timber Sash Easy Clean windows for this £100m plus prestigious renovation and convertion into super-luxury apartments, due to their many years of experience and expertise in supplying Heritage replacement windows for large scale historic and Grade II listed buildings restoration projects.
Sponsored
Lisgar Terrace,  Grade II Listed, Window Replacement Scheme, Fulham.

Lisgar Terrace, Grade II Listed, Window Replacement Scheme, Fulham.

Arden Windows Ltd

The buildings at Lisgar Terrace in Fulham are one of many Samuel Lewis Housing Trust Estates in the London area, each comprising of a solid brick structure characterised by large chimney stacks and high cornices.Samuel Lewis was a Victorian philanthropist who earned his fortune through finance and money-lending. On his death in 1901 he left an endowment of £670,000 to set up a charitable trust to provide housing for the poor; a high sum at the time and one that equates to around £30 million in today’s values.E Harry Davis an original trustee of the Estates and brother-in-law to Samuel Lewis, became chairman of the Board of Trustees in 1916 following the successful development of the first three estates in Islington, Chelsea and Camberwell. Davis continued the legacy of Samuel Lewis; using the endowment wisely in the development and management of rented properties so that the Trust became one of the largest providers of accommodation in the Southeast of England.The blocks at Lisgar Terrace were built in 1927 and are a fine example of Victorian architecture, although the timber sliding sash windows which were nearly 100yrs old were in need of replacement.Durkan where appointed by Southern Housing Group to undertake a £30m refurbishment of the estate a number of years ago. Arden worked with the architect to design a bespoke solution for the windows that met the aesthetic, thermal, and security requirements of the project. Samples were manufactured and approved by the client and conservation officer and Arden supplied the windows to the first four phases, which were installed by others.In late 2019 having proven the product quality & manufacturing capability throughout the supply of products to the first phases, Arden tendered for and were subsequently appointed by main contractor Durkan to undertake the full sub-contract supply and installation of windows and a number of doors to Phase 5 of the window replacement works.Work commenced on site in March 2020 and despite the challenges of programme revisions, supply chain disruption and site closures due to the Pandemic; the project was completed on time and within budget.
Sponsored
Drake's London

Drake's London

Crittall Windows Ltd

Haberdasher Street is the appropriately-named location for the new headquarters of Drake’s London, a firm that since the late 1970s has specialised in the design and manufacture of men’s ties. The choice of Crittall Corporate W20 windows was not a difficult one – given that the main section of the building dates from the 1930s it was a natural decision to choose steel windows as these would have been installed originally. The functions within the building include workshops where people handmake ties, requiring a lot of natural light.
Sponsored
Groundbreaking Modernist house updated with new Clement metal windows

Groundbreaking Modernist house updated with new Clement metal windows

Clement Windows Group

This stunning Grade II* Surrey property was built in 1932 by renowned architects Connell, Ward and Lucas and is a rare example of the Modernist Movement in architecture.Described at the time as ‘more like an invention by Picasso than a house’ the building was revolutionary for its time and divided opinion. Built using reinforced concrete with a flat roof it is designed to prioritise light and space.The windows are key to the original concept which is based on the movement of the sun – in the morning the breakfast room gets the early sun and the living room benefits from the light in the late afternoon.Windows from the Clement EB20 range were manufactured and polyester powder coated in a matt Pastel Blue. The Clement EB20  double and single doors include Clement’s multi-point locking door system which can achieve PAS4:2016 in accordance with approved Document Q. 
Sponsored
Stunning warehouse conversion benefits from Clement W40 metal windows

Stunning warehouse conversion benefits from Clement W40 metal windows

Clement Windows Group

Clement have replaced hundreds of industrial style steel windows at the newly restored Maple Building in Kentish Town, North West London. Dating back to the 1890s. Acquired recently by The Linton Group who have turned the old converted warehouse into five floors of luxury apartments and penthouses. Interior architects, Gordon-Duff & Linton insisted upon a high specification throughout, focusing on strong acoustic and design performance. Clement W40 steel windows were the perfect choice, complementing the cosy, well-lit interiors that are a feature of the building, as well as offering superb quality and an impeccable match to the original fenestration.
Sponsored
Profile 22 Optima Flush Casement Windows specified for high quality housing development

Profile 22 Optima Flush Casement Windows specified for high quality housing development

Epwin Window Systems

Over 500 Profile 22 Optima Flush Casement Windows were installed in a private housing development in Whalley Range, Manchester. Housing developer Laurus Homes, a profit-for-purpose housing developer that’s part of Trafford Housing Trust, secured planning permission to build 13 four bedroom houses and 16 two bedroom apartments in Whalley Range near Manchester. The main contractor for the project was Lane End Group, the market leader in the construction and housing sector in the North West. The contract for the windows and doors in the development was awarded to Profile 22 Approved Contractor Kingfisher Windows
Sponsored
Grade II listed school sensitively upgraded with new Clement Brooking steel windows

Grade II listed school sensitively upgraded with new Clement Brooking steel windows

Clement Windows Group

Trent is a village and civil parish in northwest Dorset, in the beautiful Yeo Valley. The Trent Conservation Area was designated in February 1970. Many of its structures are listed due to their historical and architectural significance, including Medieval and Tudor buildings.  From 1835 to 1875, Reverend Turner and his wife occupied the village rectory. Together, they built a great number of the buildings that are still in the village today, including the Alms Houses. In 1862, the Turners constructed the National School which was to be for girls and infants. Throughout the years, the National School has seen many changes, including the introduction of boys and the expansion of the buildings. Unsurprisingly, the original metal windows at the school were not fit for purpose and the time came to replace them. This required sensitivity, as it was imperative the new windows looked similar to the originals. The Clement Brooking range was specified because the slim, strong frames could replicate the wonderful shaped heads of the existing windows and they could be fixed directly to stone. The 16mm krypton filled units offer the much-improved thermal performance required and, like all Clement windows, the frames could be fitted with restrictors, essential for safety.Ros Baker, the Deputy Headteacher said: “We are so pleased with the finished result! The transformation the windows have made to our school and local area is fantastic. Many local residents have also commented positively on the ‘new look’ windows. They have been sympathetically upgraded, in keeping with the original school building, and have had a positive impact on our school environment. Furthermore, there was no impact on the staff or the children during the refurbishment.”
Sponsored
Ventrolla | Sandhurst Royal Military Academy | Grade II Listed Sash Window Renovation

Ventrolla | Sandhurst Royal Military Academy | Grade II Listed Sash Window Renovation

Ventrolla Sash Window Specialists

450 sash windows restored and double glazing installed by ventrolla at royal academyKEY FEATURES: COMMERCIAL, GRADE II LISTED, SASH WINDOWS, EDUCATION, RENOVATION, DOUBLE GLAZING, VENTROLLA PERIMETER SEALING SYSTEM, VICTORIAN.After the existing windows, dating back to 1862, were given their marching orders due to their poor condition, the timber renovation specialists were drafted in to upgrade the ageing sashes.As part of a £7.5 million refurbishment across two years, the Grade II listed building, used by the Army Medical Directorate, presented 450 sash windows in dire need of  complete renovation and upgrade due to many years of exposure to the elements.The majority of sashes were one and a half metres tall with larger ground floor windows reaching two and half metres.The deteriorated condition of both the sashes and frames meant the building was very draughty with many of the windows being rotten and inoperable.To remedy these problems the rotten timber was routed out of the original box frames, and replaced with Ventrolla’s patented epoxy resin VR90. Preserving the original sash windows was just as important as improving the energy efficiency of the building.Following this process, the unique Ventrolla Perimeter Sealing System (VPSS) was installed to combat draughts and reduce external noise. The sash cords were then replaced, pulleys serviced and sashes correctly balanced to ensure the smooth and safe operation of the windows. Andy Meachen, Project Manager of the Military Academy, said:“The service that Ventrolla provided was excellent and we were very pleased with the final result. We have really benefited from the renovation work as the building is noticeably warmer, there are no more draughts and the windows now open easily.”“We were very concerned about maintaining the aesthetics of the building and being sympathetic to its heritage, Ventrolla managed this beautifully.”“Due to their professionalism and craftsmanship, we have also asked them to start work on our Old College renovation project too.”The Royal Military Academy, Sandhurst was founded in 1947 and offers military, practical and academic training.With over 30 years experience, Ventrolla offers a tailored range of period window solutions. Their unique service includes draught-proofing with the Ventrolla Perimeter Sealing System (VPSS) and fitting replacement double-glazed sashes that incorporate the patented Sash Removal System (SRS) for easy painting and future maintenance.They also offer complete new timber windows, secondary glazing solutions and a wide range of window hardware. Ventrolla has its head office in Harrogate, North Yorkshire and regional offices located throughout the UK and Ireland.
Sponsored
Steel windows chosen for stunning private residence in West Sussex

Steel windows chosen for stunning private residence in West Sussex

Clement Windows Group

Clement EB24 steel windows, doors and screens were the ideal choice of fenestration when it came to this jaw-dropping project in Arundel. The combination of T bars, slim, dark frames and satin chrome accessories create just the right look.Achieving such an exceptional appearance did not mean that performance had to be compromised. The 24mm insulated glass units are not only argon filled, but also include a Silverstar E glass coating. Chosen for its thermal insulation layers which lower both the thermal loss of the glass and energy consumption while allowing high light transmission.Our client explained the project and her experience of Clement Windows:“When we finally made our decision to modify and extend our 16th century, Grade II building, we knew that we had a challenge on our hands. We owed it to the history and unique position of the existing premises to choose first class materials and workmanship.Our brief to the architect was that we really needed to maximise natural light as my husband has sight issues. The building faces north, north east so this was going to be really tricky. The windows were going to be big!The search for the best then began and luckily some clients of ours recommended Clement Windows. We visited the showroom, liked what we saw and began the design and surveying process. The quality of the steel, the finish and the fit were head and shoulders above anything else that we had looked at. We wanted an unfussy, minimalist profile inside and out. Simple lines and workmanship one could trust. Clement ticked all the boxes.A few months later the team showed up to fit the glass. We did have certain logistical issues relating to access but these were overcome with good planning. At the end of two weeks, we had a home! The installation of the glass transformed a building site into an incredible, light-filled architectural space that then became the most stunning home we could ever have dreamed of living in.”
Sponsored
Clement steel windows come in all shapes and sizes!

Clement steel windows come in all shapes and sizes!

Clement Windows Group

This project involved the demolition of an existing two storey extension to the original house which was built around 1840 in the Barnsbury Conservation Area in Islington in North London. The interior layout was unsuitable and the owners wanted to bring more natural light and views of the garden into the space. Clement provided the stunning EB24 steel windows and doors which provide a sharp contrast to the oak boarding and make the extension look as if it is floating, enabling excellent views across the garden and surrounding area.
Sponsored
HOWGATE CLOSE

HOWGATE CLOSE

Velfac Windows

With average daily energy bills of only 24p, the cottages at Howgate Close have earned a reputation as possibly the UK’s most energy-efficient homes*. Built by farmer Dr Chris Parsons, the row of nine, single storey cottages exploits a range of passive solar design principles** - including a southerly orientation, a high thermal mass and a earth-bonding (external walls partially covered in soil) - to create homes which are exceptionally energy efficient and comfortable to live in. The homes are also truly affordable as no artificial heat source is required to deliver a stable internal temperature averaging 21-23 degrees Centigrade. The cottages instead use a mix of passive heat sources, created by people and appliances, and solar gain generated through VELFAC triple glazed aluminium / timber windows. As a result, the energy consumption of a two bedroom cottage is 94% less than the average UK household. The architecture of Howgate Close is based on designs created by sustainability housing experts Hockerton Housing Project** ( https://www.hockertonhousingproject.org.uk/) with performance further enhanced by Dr Jerry Harrall (https://drharrall.com) a consultant in the design and adaptation of fossil-fuel-free buildings. ‘Describing Howgate Close as a development of eco-homes is to understate its performance,’ states Dr Harrall. ‘In fact all nine properties operate beyond zero-carbon, and instrumental to the success of Howgate Close is the installation of VELFAC composite triple glazing, specified for its excellent thermal performance.’ A key feature of every cottage is a large, white framed VELFAC composite window screen installed on south facing facades. The screens combine fixed units and a sliding patio door, and with dimensions of up to 3m x 5m occupy almost the entire wall. ‘The VELFAC windows play a crucial role in achieving a SAP rating for each cottage of around 143, potentially the highest group of SAP rating’s in the country and a significant improvement of the average rating of 63,’ says Dr Harrall. ‘VELFAC triple glazing has a U-value of 0.8W/m2K which reduces the rate of heat loss while bringing more natural light into each home, thereby reducing the need for artificial light,’ says Dr Harrall. ‘Across the development, the windows are actually net gatherers of heat, and contribute to an annual energy surplus which we estimate will be enough to power another similar dwelling.’ Unwanted solar gain is minimised by the exceptional insulation afforded by the triple glazed units, enhanced by low emissivity coatings applied to inner glass panes. Ventilation is primarily mechanical but supported by trickle vents within the window frames, and by cross ventilation using additional, smaller VELFAC windows installed in the rear facade. ‘Triple glazing also delivers excellent acoustic insulation,’ adds Dr Harrall, ‘which is important, as the cottages are located within actively cultivated farmland, and are near a busy road and wind turbines.’ Howgate Close is now a model development for affordable, ultra-low energy homes and is also the focus of a two year research and monitoring project, co-run by Dr Harrall and Professor Anton Ianakiev, Professor in Sustainable Energy Systems at Nottingham Trent University (NTU). ‘I have also co-authored an academic paper on Howgate Close,’ adds Dr Harrall, ‘which aims to show that it is possible to design, construct and live in buildings without resort to fossil fuels.’—ends— * Analysis by Elmhurst Energy, the UK’s largest independent provider of energy assessment, retrofit and property professional training, software and accreditation. * * Principles advanced by Professors Brenda and Robert Vale, architects of the Hockerton Housing Project, the design of which inspired Howgate Close.
Sponsored
Charisma Rose - Lincolnshire Arches

Charisma Rose - Lincolnshire Arches

Roseview Windows

This five-plot new build project in rural Lincolnshire required cream sash windows in order to match the local architecture, including the stone lintels and cills that had been selected. As a high-end development, the windows needed to be high spec and fully accredited.
Sponsored
Landmark Art Deco building in Malta fitted with new Clement steel windows

Landmark Art Deco building in Malta fitted with new Clement steel windows

Clement Windows Group

The Brewhouse, formerly known as Farsons Brewery was one of the first and finest examples of concrete-reinforced Art Deco buildings on the island of Malta. The building was founded and designed by Lewis V Farrugia and William Binnie and originally opened 73 years ago in June 1950.Now a Grade II listed building The Brewhouse has been part of a €86 million redevelopment project, reimagined by world-renowned London based ritchie*studio. Covering over 7,000 sq m of industrial space, the building now includes a unique mix of office, food and beverage, retail, visitor experience, and events space over seven floors.In a building of such historical and architectural significance the new windows not only had to look as close to the originals as possible, but also meet stringent requirements for thermal efficiency, as the building was designed to meet the strictest of environmental codes. Clement was thrilled that over one hundred white Clement EB24 steel framed windows were specified, featuring T bars and multi point locking.Robert Abela, the Prime Minister of Malta, was among around 400 people who attended the inauguration ceremony of Trident Park and The Brewhouse, one of the most iconic regeneration projects in Maltese history.ritchie*studio director, Ian Ritchie said: “Clement Windows provided the perfect steel window profile and workmanship solution to help restore this beautiful and iconic Maltese industrial Art Deco building."
Sponsored
Profile 22 Optima Chamfered Windows used in a social housing development in Telford

Profile 22 Optima Chamfered Windows used in a social housing development in Telford

Epwin Window Systems

Nuplace are a quality lettings company, owned by Telford & Wrekin Council. It secured planning permission to build 39 new homes on a site in Telford. The window specification was for a White chamfered profile that could achieve an overall U value of 1.4 W/m2K. SBD accreditation was a requirement AND PAS24. The site’s location near a busy road meant acoustic glazing was required on some elevations. Trickle vents were required on some windows, including those with acoustic glazing requirements, which meant non-standard acoustic trickle vents were required.
Sponsored
Profile 22 Flush Tilt and Turn windows have been used in the construction of flats for University of Derby students.

Profile 22 Flush Tilt and Turn windows have been used in the construction of flats for University of Derby students.

Epwin Window Systems

The developer of the new build flats was Jensco Holdings Ltd and the main contractor was Clegg Construction. The design, manufacture and installation of the windows on the project was undertaken by Profile 22 Approved Window Contractor Kingfisher Windows. As a member of the Approved Window Contractors Scheme, Kingfisher has demonstrated a wealth of experience in the management of large contract supply and installation and working proactively towards on-time and on-budget completion. The company’s track record was one of the factors that saw Kingfisher secure the window contract for Agard Court through competitive tender.
Sponsored
53 Fleet Street

53 Fleet Street

TRC Windows

Fleet Street in the City of London has long been known as the historic home of the British press. Number 53 is a Victorian terrace, with a striking front tiled facade. Thornsett Group, working with architects Capital Architecture, has recently converted the property into five luxury residences, plus ground floor retail space. We were appointed to design, supply and install 26 traditional box sash windows for the main elevation, with an acoustic performance of 45 dB Rw. For the rear of the property we provided 24 inward-opening timber tilt and turn windows, plus lift and slide patio doors.
Sponsored
Over two hundred new steel windows manufactured for Grade II listed Town Hall

Over two hundred new steel windows manufactured for Grade II listed Town Hall

Clement Windows Group

The early 20th century saw the development of a distinct architectural movement often termed ‘Stripped Classicism’. Running in tandem with the Modernist Movement of the Bauhaus School, the movement strove for bold massings, severe angles and a stylised reduction of classical elements. This style was frequently chosen by governments when designing official buildings.Perhaps the best known example of this type of architecture in the UK is the Grade II Listed Waltham Forest Town Hall, the headquarters of the London Borough of Waltham Forest Town Council. Designed by architect Philip Hepworth, construction of the building began in 1938 but was interrupted by the Second World War and so not completed until 1942. In 2019 the council approved an extensive programme of renovation works to the Town Hall which included the replacement of all the original steel windows. Clement W20 steel windows were chosen as the right product for their quality. The new white windows include both top hung and side hung opening casements with complementary fittings in a dark bronze finish.Senior Project Manager at Waltham Forest Town Hall John Cattermole said:“The team at Clement provided a great service in supplying new windows as part of the Town Hall refurbishment. Very specific aesthetic and energy performance criteria needed to be met when it came to the window replacement. The W20 windows supplied by Clement were able to meet all of these requirements.  Despite the project being on site at the height of the pandemic, the windows were delivered to programme which enabled seamless installation. Now the building has been brought back into use really positive feedback has been received from both staff and visitors.”
Sponsored
Minnesota State Capitol selects Accoya windows

Minnesota State Capitol selects Accoya windows

Accoya

A major part of the project was restoring the building’s original wood windows, which had been covered over with aluminum windows 30 years ago. The aging units—242 in total—had suffered from fogging, failing glass, air leakage, & broken balances that rendered them inoperable. Window manufacturer Re-View, were selected to restore the windows. Re-View restored the windows using restoration epoxies and replicated Accoya wood parts. Re-view chose Accoya due to its durability and 50 year guarantee. As forecasted at the start of construction in 2013, the work will be completed in June 2017.
Sponsored
Long cottage - Oxfordshire

Long cottage - Oxfordshire

Rationel Windows

It was the pretty garden and view of the house from the driveway that first drew retired couple Melanie and Phil to what is now their much-loved home of ten years.The property has four bedrooms and two bathrooms and, though it sits within a conservation area, it is not listed. The house was originally three dwellings, each with an entrance door at the front and staircases behind the fireplaces. In the 1970s the houses were converted to a single dwelling and an extension was added at the back to house a single staircase, hall, landing and main bathroom. When the couple bought the house, it had old single glazed windows and doors, some of which were rotten. Since moving in Melanie did their best to persevere with the old glazing because it suited the cottage, but in the end decided to update it earlier this year. The couple wanted a solution that fitted with the character and age of Long Cottage, but also wanted it to feel cosier, warmer and more energy efficient. They decided on triple glazed Rationel windows and doors. They chose Rationel FORMAPLUS alu-clad triple glazed windows and doors in two finishes – cream for the outside and white inside. ‘We liked the fact they were maintenance free, but had the look of wooden units to tie in with the character of the cottage and the surrounding village properties,’ says Phil.While energy efficiency was a key reason for choosing triple glazing, they also wanted to reduce noise as much as possible – Brize Norton airbase is nearby. The couple are especially pleased with the windows in the bedrooms – which now meet industry safety standards for evacuation in case of a fire – and in the sitting room.‘The sitting room is in an end gable next to the road,’ says Melanie, ‘and the new triple-glazed unit has made it so much quieter and cosier than it was before.’
Sponsored
Accoya Windows for private residence in Hamburg

Accoya Windows for private residence in Hamburg

Accoya

Accoya wood has recently been specified by Architekturo Siemonsen for windows at private residence in Hamburg, Germany. Fitted by Reinhard Adling Accoya was chosen for this project because of its stability and durability properties over other woods. Accoya wood is the perfect substrate for windows and doors as its naturally insulating and is so stable that the coatings last longer.
Sponsored
New Clement steel windows preserve the beauty of historic buildings in Birmingham’s former Gun Quarter

New Clement steel windows preserve the beauty of historic buildings in Birmingham’s former Gun Quarter

Clement Windows Group

The Clement Windows Group has manufactured and installed steel windows from its W20 range for the Comet Works in Birmingham’s Princip Street. The original warehouse buildings in the city’s former Gun Quarter have been converted by building re-animator Javelin Block into 20 impressive residential units, including lofts, apartments and mews houses. The Clement W20 range was specified for its ability to provide an almost exact match to the existing metal windows while offering modern advantages such as double glazing and a very long-lasting polyester powder paint coating requiring minimal maintenance.
Sponsored
Over 300 Profile 22 Optima windows were installed in a private housing development in Chipping near Preston in Lancashire.

Over 300 Profile 22 Optima windows were installed in a private housing development in Chipping near Preston in Lancashire.

Epwin Window Systems

Chipping Homes specialises in building high quality, architecturally sensitive homes, which made the choice of contractors critical. This was especially the case for the window contractor – with over 300 windows required, getting the right look and feel for this element of the project was essential. The windows specified for the contract were Optima from Profile 22, the UK’s leading award-winning commercial window system. The fabrication and installation contract was awarded to Profile 22 Approved Contractor Kingfisher Windows, a leading manufacturer and supplier of windows, doors and conservatories.
Sponsored
Timber casement windows

Timber casement windows

Mumford & Wood Ltd

Timber casement windows - renovation projects
Sponsored
30-34 Langham Street

30-34 Langham Street

TRC Windows

This Edwardian office building in a London west end conservation area has undergone a remarkable transformation, re-emerging as luxury apartments. The project, led by architects De Metz Forbes Knight, redesigned and updated the stone-fronted property on the corner of Great Portland Street and Langham Street, which boasts high windows and fine London. We were appointed to design, supply and install 71 heritage casement windows which would reflect the original styling yet provide modern thermal containment. We created the windows using Slimlite double glazed units with larch frames, and also applied EPDM sealant to further contribute to energy efficiency.
Sponsored
Incarnation Secondary Glazing - Brunel House

Incarnation Secondary Glazing - Brunel House

Roseview Windows

Brunel House is a listed building being converted into luxury apartments. Replacing the primary windows was not permitted, so our client needed to look at a different solution to gain the thermal performance required.The windows were large sashes, requiring heavy duty frames with tilt facility, providing simple access to the primary windows for cleaning and maintenance. An unusual and bespoke feature of this project was - at the architect’s request - trickle vents installed in the bottom of the secondary glazing track.The end result is that, without any visible sign of works “Replacing the primary windows was not permitted” being done, tenants would experience comfort levels that match modern day double glazing, even though their windows are over 100 years old.

Showing 73-108 of 308

Feedback