"underfloor heating"

Our team at Helmsman manufactured, delivered, and installed a variety of our Heated Lockers. There were 35 three-compartment Laminate Lockers to accommodate 105 people, as well as installing 28 Z Lockers to accommodate 56 people.The lockers were manufactured with wet specifications which means that the Laminate lockers are manufactured for an environment where there is humidity, which can also withstand rust. The lockers are manufactured with an aluminium and stainless-steel body and laminate doors.The specifications of the three-compartment lockers and Z lockers were to be 1775mm high, 298mm wide, and 450mm deep. Along with the lockers, the lockers were all installed with seat stands. The measurement of the seat stand was 300mm wide and 450 deep, the stands were powder coated in colour ‘Black’, to match the body of the lockers. Whereas the seating was in our standard slats of Ash Hardwood.The body of the Heated Lockers was powder coated in ‘Black’. The laminate doors were in the vibrant colour of ‘Ballerina’. The heated lockers were finished with Lowe & Fletcher Nimbus in ‘Black’ which is a great choice as it secures personal belongings, along with many benefits such as having a collection of user modes such as public, private, or technician mode.

A project to install a communal heating system at low rise flats and maisonettes at Bretton House and Sanders Way, in the London Borough of Islington, is using bespoke metal pipe boxings to conceal external pipework.The more efficient heating system was installed as part of Islington Council’s ongoing cyclical repair programme, which assesses all properties on a 7 to 10 year cycle to establish where improvements need to be planned & implemented.The Pendock casings are manufactured from 2mm thick corrosion resistant aluminium and incorporate a brown PPC finish to integrate with the brickwork and provide a consistent finish to the project. The use of aluminium not only improves weather resistance, but also adds tough protection to the external pipework.

After moving from busy Stockport in readiness for retirement, accountant Susan and husband Philip, a Manchester University academic, replaced the oil-based heating system at Willow Cottage with a Daikin Altherma high temperature heat pump. 

application area: commercial gas heatinguse type: condensing gas boilersproject scope: line commercial freestanding chimney for condensing operationadded value: corrosion-resistant, air-tight and waterproof finishBackgroundThe combustion gases from the school's boiler room are exhausted through a freestanding 28-metre brick chimney. The structure was not suitable for the wet operation of condensing boilers. FuranFlex-25 Black was the chosen lining material.The new boiler plant required a 500mm diameter flue liner but the chimney could not accommodate a rigid liner this size. A FuranFlex25 Black liner was therefore specified as it expands into the rectangular flue shape when inflated with steam.Statement of workFuranFlex25 comes as a folded and soft tube. Inflating with steam irreversably hardens the liner fixing it in place. Within a few hours of steaming the liner was ready for connecting to the boilers. The appropriate adaptors/terminals were fitted making the chimney ready for operation.

Resilient 250 was installed as a Soft Floor Covering and bonded to the top of the concrete base. The acoustic underlay achieves the Approved Document E UK Building Regulations (The Resistance to the Passage of Sound) performance standards for Floor Type 1.Resilient 250 was bonded to the concrete base with the Sonixx SX900 adhesive in the living areas of 255 apartments. An 8mm PU foam underlay (Super 8) was loose laid over Resilient 250 and a Cavalier carpet stretch fitted on top.In the bathroom areas the Forbo Surestep Laguna vinyl was installed directly onto the Resilient 250 using F46 (Pressure Sensitive Acrylic Adhesive) from F. Ball and Co Ltd.Resilient 250 is a 2.5mm thick, high performing acoustic underlay manufactured using sponge rubber. It achieves an acoustic performance of 19 dB (ΔLw), significantly reducing the transmission of impact sound. It is a versatile underlay and can be used below various floor coverings including carpet, wood, laminate, luxury vinyl tiles, vinyl and ceramic / porcelain / natural stone tiles.The installers had nothing but positive feedback, on how quick and easy the underlay was to work with. At only 24 kg (43 lb) per roll, it is easy to distribute around site. The underlay therefore facilitated a simple, quick, clean and cost-effective installation.Features of Resilient 250:Extremely installer friendly; quick and simple to work with and easy to distribute around site.Ideal for use in Private Homes, Hospitality, Retail, Healthcare, Multi-Family Housing, Apartments and Hotels, Commercial developments, Care Homes, Schools and Education Projects.With a Thermal Resistance of 0.23 Togs, RS250 is excellent for use with underfloor heating systems.As it is manufactured from sponge rubber, it does not mark the walls unlike alternative rubber crumb underlays.Durable - provides long-lasting performance and will not deteriorate or collapse over time.Hygenic - naturally anti-microbial, anti-allergy and resistant to decay with low VOCs.

VIEGA MEGAPRESS – THE IDEAL FIT FOR FESTOOL HQAward-winning international power tools manufacturer, Festool has invested £10 million into its new headquarters based in Bury St. Edmonds. As part of the construction, Viega’s Megapress press connection technology has been utilised for the building’s new state-of-the-art heating system, allowing for an efficient and effective installation.Festool has relocated its 55 office-based employees to the new site in Suffolk Business Park, in Bury St. Edmonds. The large, modern facility includes meeting rooms, cafés and office space with a separate warehouse and demonstration facility. It was important for the company that its new headquarters represented a modern and sustainable design and could be a facility where the company can continue to expand and develop.The headquarters has a complex range of HVAC systems, including a hybrid air conditioning system, underfloor heating and domestic services. Viega’s carbon steel press fitting system, Megapress was an ideal solution to create the pipework connections, offering a fast and effective alternative to traditional methods such as welding.David Aldous, Mechanical Project Manager at Ceetech, the contractor for the project, commented: “We selected Megapress as it ticked all the boxes. It provided a secure press connection without the need for welding and allowed our team to undertake the work efficiently and effectively. This project had to be completed to a tight deadline, so it was essential to make strategic time gains throughout the installation period.“We were also able to make valuable time-savings because with the Megapress system, there is no need to prepare the pipe surface or clean it after as with welding, threading or grooving. From a health and safety perspective – it also removes the element of hot works.”A highly effective pressing method, Megapress connections can be made in just seven seconds – helping to achieve a 60% reduction in installation time. After cutting the pipe to the required length, contractors need only deburr the cut surface, slide the press fitting into place and press the connection.The simplicity of the press fitting process also ensures that a uniform seal is created on each connection throughout the project; particularly important on large-scale developments where there is set to be thousands of joints across a single site. Once the fitting has been pressed, it forms a strong and secure connection.David concluded: “The Megapress system is excellent, I’ll certainly select Viega again for future projects. It was a clean installation and the end-client was pleased with the high quality of work."

Daikin Altherma low temperature monobloc heat pumps provide heating or cooling and domestic hot water for three homes newly built by award-winning housebuilder Distinctive Developments in a former farmyard near Huntingdon, Cambridgeshire.

A 35 sq.m end-terrace house in Gloucester is a showcase for greener heating. Preparing for a new tenant, landlord and heating specialist Craig Vernon replaced the 1990s all-electric space heating and hot water systems with a modern, greener solution.

Project BackgroundHoe Bridge School is an independent co-educational pre-prep and prep school in Woking, Surrey. The sports hall had been heated by an old radiant system supplied some 35 years ago. The old system was past economical repair so the school decided to invest in a brand new radiant heating system. Contractor, ABS Ltd had over the years maintained the facility, so the school looked to them for advice on replacement equipment. Powrmatic were approached by ABS Ltd and undertook a thorough survey of the sports hall, with a view of replacing the old system with a new Powrmatic SRP – PCV continuous radiant tube system.Project SolutionAlthough the concept of the new heating system is very similar to the old one, there are sound reasons for the like-for-like type replacement. Radiant heating in sports halls is well established as it provides an environment of uniform heat coverage without stuffiness where sports activities can be performed in complete comfort.The new Powrmatic SRP – PCV continuous radiant tube system comprised two radiant branches, each 22m long, down the length of the hall, each branch containing 2 x PCV 23kW burners, all feeding to a vacuum fan to extract the products of combustion. This arrangement virtually mimicked the original layout to reduce the installation time and costs.Project ResultGas fired continuous radiant tube heating is a proven type product being the most appropriate solution for the challenge presented by sports halls, maintaining comfort levels whilst minimising fuel usage and carbon emissions.The SRP-PCV system combusts fuel at the point of use and has the capability of modulating down to 60% of high fire whilst maintaining efficiency but reducing fuel consumption. The Powrmatic SRP-PCV system is designed and manufactured in accordance with BS EN 17175:2019 for Multi-Burner Systems and incorporates a patented burner metering device.The Powrmatic SRP-PCV & PCV+ systems have been validated following review against government approved high performing energy efficiency criteria, with a Seasonal Space Heating Energy Efficiency (SSHEE) of greater than 90%, thus allowing inclusion onto the ETL (Carbon Trust, Energy Technology List). This high efficiency reduces energy usage, operational costs and carbon emissions.

A four-bedroom farmhouse built on an exclusive development on the border of Wiltshire and Berkshire, has had a Grant renewable heating system installed including an Aerona³ air source heat pump, hot water cylinder and heat emitters. This property completes the development of four sustainably built homes, all of which have Grant heat pumps fulfilling their heating and hot water requirements.

Four Grant Aerona³ air source heat pumps have been installed at Caerphilly Council Tir Y Berth Depot, providing renewable heating to a number of offices. The installation of Grant heat pumps was part of a wider redevelopment programme which has transformed the space to maximise its potential while also reducing carbon emissions.

Setting the benchmark for UK Waste Authorities, North London Heat and Power are creating one of the most advanced Energy Recovery Facilities (ERF’s) in the world. The new EcoPark will turn non-recyclable rubbish into heat and electricity. Operating under strict regulations, the new site will become one of the cleanest and safest ERF’s in the world.Setting the benchmark for UK Waste Authorities, North London Heat and Power are creating one of the most advanced Energy Recovery Facilities (ERF’s) in the world. The new EcoPark will turn non-recyclable rubbish into heat and electricity. Operating under strict regulations, the new site will become one of the cleanest and safest ERF’s in the world.

A high-performance levelling compound and adhesives from F. Ball and Co. Ltd. have been chosen to install floorcoverings in the Middle East and Africa’s principal healthcare and research centre for the treatment of burns and trauma, the Ahl Masr Hospital in New Cairo, Egypt.Flooring contractors from Cairo-based Tradelink installed floorcoverings throughout the newly built hospital, including in inpatient rooms, intensive care units, nurse stations, blood donation areas, emergency department, administration centre and corridors, a total area of over 5,500m2.Tradelink began by undertaking moisture tests to ensure that the building’s subfloors were dry enough to receive floorcoverings. Surfaces were then primed using Stopgap P131 general-purpose primer to promote the application characteristics of subsequently applied subfloor preparation products.Stopgap Red Bag was then applied throughout to create a perfectly smooth base for floorcoverings to be installed. The water-mix, self-smoothing underlayment is designed for areas that are subject to light wheeled traffic and can be used over normal underfloor heating installations.Styccobond F44 solvent-free acrylic emulsion adhesive was used to install Gerflor Taralay Impression Compact safety flooring throughout the hospital, with the exception of operating theatres and X-ray rooms. Styccobond F44 provides a high bond strength, strong initial tack along with a long open time and is protected against biodegradation.Gerflor Mipolam Elegance EL5 conductive flooring was installed using Styccobond F57 in the operating theatres and X-ray rooms. Carbon fibres in the adhesive mean that when set it will conduct electricity, so when used to install conductive/anti-static floorcoverings, it stops the build-up of electrical charges that can affect sensitive electronic equipment. The solvent-free adhesive also offers strong initial tack and a high bond strength.Finally, Tradelink used Styccobond F60 contact adhesive to install skirting and capping and coving, as well as anti-bacterial PVC wall-guards, throughout the hospital.

SGB Contractors have used UltraTile adhesives and grouts to install 250sqm of tiles at Slim Chickens’ brand new restaurant.BackgroundThe much-loved fast-casual food chain, Slim Chickens, have opened their latest restaurant at Bristol Cribbs Causeway shopping centre – the heart of Bristol shopping.The ChallengeTime was of the essence for SGB Contractors, who had just two weeks to install 250sqm of tiles at Slim Chickens’ brand new restaurant. It was imperative that the materials used adhered to the strict restaurant branding to be in keeping with the iconic interior design that Slim Chickens customers love.The SolutionUltraTile has a long and successful history of providing trusted and proven tile adhesives and grouts to the hospitality sector. For this exciting location, SGB Contractors used ProFlex SP and ProSS Flex adhesives and ProGrout Flexible grout to install and joint the chosen tiles.ProFlex SP rapid set flexible tile adhesive is classified as S1 in accordance with EN 12004 and boasts a high level of deformation for greater tolerance to movement. The S1 properties of ProFlex SP makes it the perfect choice for timber floors, swimming pools and underfloor heating systems.Specially formulated with enhanced adhesion and flexibility, ProSS Flex is a polymer modified adhesive suitable for use with most common substrates and tiles.Completing the project, SGB Contractors used ProGrout Flexible in Charcoal to grout the tiles. Designed for areas where movement or vibration is likely. ProGrout Flexible is suitable for joint widths up to 20mm and is washed down easily with minimal effort.Available in 12 beautiful tones, ProGrout Flexible is mould resistant, boasts a 30-60 minute pot life and will hard set in just 12 hours. What’s more, ProGrout Flexible has been developed using ColourShield Technology – a process which involves the addition of a specialist additive for lasting colour protection.ResultsThanks to the expertise of SGB Contractors and the reliability and durability of UltraTile materials, this project completed on time and the residents of Bristol are now able to enjoy their chicken wings in a beautifully decorated restaurant.

ngineer puts greener heating solution to the test for comfort and economy 

A Dimplex air source heat pump forms part of the award-winning energy credentials at a ‘Superhome’ designed to showcase the energy savings that can be made using grants and relatively low-cost improvements.

application area: commercial heatinguse type: industrial condensing boilersproject scope: preserve rectangular flue shape and maintain lined diameteradded value: quick and efficient installation with minimal downtime and disruption to the building structureBackgroundTwo new high efficiency condensing boilers fitted into the basement of a nine-story office block (Dublin Civic Offices, Ireland) using two separate brick lined chimneys that rose through the nine floors and exited on the rooftop.The brick chimneys posed a problem as the chambers measered 300mm x 450mm no standard 350mm flue liner would fit. Due to the pliability of Furnflex, the liner was able to take up an oval shape in the chamber giving it the full 350mm required. This building is an extremely busy high-profile office block therefore minimum disruption to day to day business was required.Statement of workFollowing an onsite survey, Furanflex was deemed the ideal solution to line both chimneys. The installations were carried out over two weekends, one for each chimney, with no disruption to the office operations. The project completed on time and within budget.

A barn conversion in Brecon has had a renewable heating system installed, featuring an Aerona³ air source heat pump and a QR hot water cylinder, a system which was designed by Grant UK and installed by a G1 Installer.

Hull homeowner Ben Andrew is watching his home energy bills carefully to measure the benefits of switching from an all-gas heating and hot water system to a combination of gas boiler and air source heat pump.

A Grant Aerona³ air source heat pump has been installed at a cottage in Fife, transforming the home’s heating from an oil-fired system to a renewable alternative. The homeowners are now enjoying a warm home while also lowering their carbon footprint.

Highly skilled flooring contractors, Ransome Flooring Limited, have used Level IT Smooth floor leveller to install LVT flooring at a ground floor apartment in Bristol.BackgroundWith over 20 years’ experience and a reputation built on perfection, reliability and recommendation, Ransome Flooring Limited’s extensive nationwide flooring portfolio put them in perfect place to install 68sqm of LVT flooring at a ground floor apartment in Bristol.The ChallengeDue to the design of the apartment, a seamless transition between the various living areas was crucial. The products used also needed to provide a first time, rapid and silky smooth finish to minimise disruption and prevent any dangerous trip hazards for the homeowner.The SolutionAfter securing the project, Ransome Flooring Limited sought professional advice from UltraFloor’s team of product experts. After visiting site, and carrying out moisture testing, UltraFloor recommended the use of Prime IT Multi-surface Primer and Level IT Smooth – expert subfloor preparation materials that would meet the clients’ requirements perfectly.Formulated to promote adhesion to all UltraFloor smoothing underlayments, Prime IT Multi-surface Primer reduces pinholing, minimising the risk of costly failures. With a coverage rate of 200m² at 3:1 dilution, Prime IT multi-surface Primer is a must-have product for all flooring installation projects.Prime IT Multi-surface Primer was applied to the substrate, and once both coats of primer had fully dried, Level IT Smooth was applied.Pump or trowel applied from 2mm to 30mm, Level IT Smooth has an extremely smooth finish, essential for installing LVT, and boasts a superior flow – perfect for larger flooring projects.With a coverage rate of approximately 5.5sqm at 3mm, Level IT Smooth is suitable for underfloor heating systems, has a working time of 20-30 minutes and can receive foot traffic after just 2-3 hours – allowing you to move on to the next part of your project quickly.The superior performance of Level IT Smooth is just one reason why this much-loved smoothing underlayment is being used on a daily basis up and down the country.The ResultsThanks to the expertise of Ransome Flooring Limited and UltraFloor’s superb subfloor preparation materials, the homeowner was soon able to enjoy their luxurious new flooring.

A family home in Wiltshire has made the move from a gas central heating system to a renewable solution featuring an Aerona³ air source heat pump, a solar thermal system and QR hot water cylinder all supplied by Grant UK, helping the household to reduce their dependency on fossil fuel and lower their energy bills.

Based in Newbury, Berkshire, Howard Porter founded Polgate Ltd some 35 years ago. Formerly a Chartered Surveyor, he saw the opportunity to start his own company and has never looked back, developing mainly new build residential and commercial properties within around 25 miles of Newbury. Here we speak to Howard to gain his point of view on the Grant Aerona³ heat pump.

Britannia Metalwork worked with building contractors Gilbert-Ash and Architects Hawkins/Brown in designing, fabricating, and fitting bespoke decorative floor grilles to replace the damaged originals in the Orangery at the City of London Freeman’s School.It was a project that we were thrilled to be commissioned for and work that we are extremely proud of - the grilles were manufactured, delivered and fitted within the project timeframe, despite pressures of the ongoing global pandemic of 2021.The 168-year-old City of London Freemen's School is set in 57 acres of Ashtead Park in the heart of Surrey. The masterplan scheme included the renovation works to the Grade II listed Main House (including an energy centre), and some new buildings including junior school, dining hall and assembly hall as well as landscaping and car park works. The total cost of the project was £15 and won a place as a Finalist in the 2022 Conservation & Regeneration Constructing Excellence SECBE Awards.Britannia was commissioned to design and make a total of 33 bespoke cast iron grilles, with bare metal finish, to be placed within the marbled floor of the historic and beautiful Orangery. The focus of the work was to complement the heritage of the iconic building while ensuring good ventilation to allow the building to become a flexible and useful large space for school events.Frequently referred to as Cathedral, Ecclesiastical or Victorian decorative floor grilles and as seen here, often placed over channels holding heating pipes, they provide a practical and decorative heating vent. Originally designed for churches they are increasingly popular in private houses, greenhouses, and commercial building developments. Our grilles can be ordered in cast iron or cast aluminium and finished in a wide variety of options. We also work in association with Gunning Heating, making decorative cast iron grilles that fit seamlessly into their underfloor trench heater units.  See our website for a full list of our grille designs or contact us to discuss your bespoke requirements.

On the recommendation of Terry Baker Electrical Ltd, a member of the Chamber and also part of the Dimplex Quantum installer network, the Chamber selected Dimplex’s unique Quantum off-peak electric heating system to deliver improved efficiency, lower running costs and improve comfort at the headquarters.

Background to the projectSouthway Housing Trust is a South Manchester based housing association managing 6,000 local homes.Southway has pledged to be zero-carbon by 2038 and has identified switching its homes from gas to electric heating as crucial to achieving this target.In 2022, a survey of Southway’s residents found that 88% were keen to reduce their impact on climate change, and Southway’s commitment to reducing carbon is in line with Manchester City Council’s net-zero ambitions.The Arrowfield Low Carbon Living Project represents an early and ambitious retrofit of a south Manchester neighbourhood that will reduce the estate’s carbon footprint by as much as 50%.Southway is replacing 396 of Arrowfield’s inefficient gas boilers in-line with long term government plans to electrify heat and will also improve the fabric of homes to make them more energy efficient.The scale of the project, part funded by the European Regional Development Fund (ERDF), has made it one of the UK’s biggest home retrofit schemes.NIBE products used:NIBE F2040 Air Source Heat PumpKey stats:112 NIBE F2040 Air Source Heat Pumps installedContributes to project to remove 370 tonnes per annum of CO2 in ArrowfieldInstalled by Rothwell Plumbing GroupPart of a project to retrofit 199 homes with air source heat pumpsThe solution to the projectArrowfield Low Carbon Living is a flagship scheme in Manchester, retrofitting 199 homes and 197 apartments with air source heat pumps. NIBE was chosen as one of two heat pump providers to bring low carbon, sustainable heating to residents living in the Arrowfield estate. NIBE’s high quality, reliable heat pump systems provide optimum savings and automatically adapt to each home’s output requirements.Rothwell Plumbing Group (RPS) was chosen as the installation partner for the project, with a proven track record for delivering high quality heat pump systems, in both the public and private sectors. RPS are also MCS & Trustmark accredited, with the experience and technical ability to install NIBE systems to the highest of standards.Southway’s aim is for the project to act as a learning process and blueprint for how it can scale up the retrofitting of its entire housing stock over the next 15 years.Ahead of this ambitious project, a community engagement programme enabled greater awareness of heat pumps as a low carbon heating solution, whilst providing the opportunity to listen and respond to resident feedback.The Arrowfield Hub, located in in a repurposed empty house on the estate, became a venue for regular engagement between the residents and the project team, creating an open forum for questions and comments on the proposed scheme.The Hub was also heated by an air source heat pump, allowing residents to witness a live heat pump in operation and experience the warmth of the building.Residents were also able to express their concerns surrounding the project, and these could be addressed accordingly. This regular and open engagement was key to keeping residents informed and more familiar with their soon-to-be new heating systems.The Hub also allowed for the project team to dispel common myths and misconceptions about air source heat pumps and reassure residents that their homes would remain warm throughout the yearThe Results112 NIBE’s F2040 Air Source Heat Pumps have been providing heat and hot water to residents across the estate, adapting to the requirements of each and every home in the estate, whilst providing powerful output even down to outdoor temperatures as low as -20°C.The systems will provide homes across the estate with optimised energy and cost savings, whilst supplying a supply line temperature of up to 58°C regardless of outdoor temperatures.TestimonialMatt Roberts, Strategic Director of Property and Development at Southway Housing, said:"Community engagement for the Arrowfield Low Carbon Living Project was central to the project's aims. Foregrounding the needs of Arrowfield's residents as central to the project’s implementation, helped us to better convey the benefits of low carbon heating and address concerns and suggestions brought forward by homes set to benefit from the retrofit scheme.Air source heat pumps are essential to Southway Housing Trust decarbonising our housing stock and achieving our net-zero goals. Working in partnership with NIBE is part of that process and has contributed to achieving carbon savings of 370 tonnes CO2 per annum on Arrowfield.”About the installerRothwell Plumbing Services Group Ltd, formed in 1997, are a family run business specialising in delivering renewable solutions across the North of England. The company helped to ensure residents in Arrowfield Estate could access maximum energy savings and reduced energy bills.

Mark Lewis’s newly self-built two-bedroom cottage for his retired parents has a low temperature heat pump at the centre of an eco-friendly lifestyle design for maximum comfort, economy and efficiency.

Hexham and Northern Mart is an auction house in Hexham (25 miles west of Newcastle), specialising in the sale of livestock and cattle to farmers across the North East of England. The business decided it was time to replace its old gas-fired heating system with a more sustainable alternative – one that would not only reduce energy consumption and running costs, but also earn additional income through the Renewable Heat Incentive (RHI). Minimising impact on day-to-day operations during the transition was another key consideration. Managing director Robert Addison tasked renewable energy specialist and NIBE Pro Installer Calibrate Energy Engineering with finding the right solution to meet the heating and hot water demands of the 112,050sq ft building.The SolutionThe team at Calibrate specified, designed and installed a 300 kW renewable heating system made up of five 60 kW NIBE F1345 ground source heat pump (GSHP) units. They paired this with a 50 kW solar PV array, fitted to the roof of the main pen area, which partially powers the NIBE GSHP system. The in-ground heat collectors required for the GSHP were laid in the fields around the buildings, with the controls units sited in a prefabricated plant room to the rear of the premises. The installation took just three months from start to finish, and during this time it was business as usual for Hexham and Northern Marts.ResultsDocked together in a cascade for greater output capacity, the five NIBE F1345 GSHP units now meet 95% of Hexham and Northern Marts’ 394,000 kW/h annual heating and hot water demand. Meanwhile, the 50 kW solar PV array generates enough free electricity to offset a significant 50% of the power needed to run the GSHP system. Hexham & Northern Marts is set to make a 236% return on investment – reaping an estimated £862,000 in energy savings and commercial RHI payments over the next two decades.Customer Testimonial“We couldn’t be happier with our new renewable heat and power sources. As well as delivering instant reductions in energy usage and subsequent savings on heating bills, the NIBE GSHP solution is providing us with a steady stream of income for the next two decades, thanks to the RHI. The power produced by the solar PV panels is an added bonus, and makes running the heat pump system even more cost-effective.“As a result, we’re expecting to see returns of more than double our original investment over the next 20 years – which is absolutely invaluable from a business point of view. Not only this, but we’ve got an efficient, reliable renewables setup that’s fit for the future, and will continue to deliver ongoing savings for years to come.”Robert Addison, managing director, Hexham & Northern Marts