NBS Source
I'm a manufacturer

"tanking"

761 results found

Sort by:

Showing 37-51 of 51

Sponsored
Creamery production facility uses FasTop

Creamery production facility uses FasTop

Sherwin-Williams

Wensleydale Cheese has been made in Wensleydale, Yorkshire since 1150 when monks settles and lived at monestary at Forsnear Hawes. Today cheese is till handcrafted with the original recipe at the two Wensleydale Creamery sites using milk from local cows.Wensleydale Creamery required floor finishes throughout production floors which would be hygienic and very durable to provide a long term solution. Excellent chemical resistance was required against regular spillages from dairy produce such as whey.Dairy production procedures mean that floors are subjected to heavy duty use and impact from fork lift trucks and storage equipment.SystemThe system chose was FasTop TG69 polyurethane floor screed which has been applied throughout the two creamery sites. The system provides a completely seamless finish which is ant-slip even in wet conditions and which can be cleaned to the exacting conditions required in a modern food factory.Coved skirting has been formed around perimeters of all production and storage areas to create a 'tanked' finish which can be cleaned with hot water processes such as steam cleaning. The product has been tested and certified by Campden BRI as a non-taint product and is certified by HACCP as a food grade material.
Sponsored
Commercial to Residential Basement Conversion

Commercial to Residential Basement Conversion

Delta Membrane Systems Ltd

Commercial to residential, it may be last orders for some of our great British pubs, for other’s its discovering exciting ways of transforming commercial structures into luxury residential dwellings.  The growing trend of converting old inns offers new homes a unique history whilst being packed with character and features.Delta Registered Installers, Advance Property Preservation Ltd were engaged to assist on a troublesome vaulted basement to a property, based in central London which had already been converted into high living accommodation.Just off the basement area were two large vaults around 12m long. Made from brick barrel construction, this below ground space had previously used for storing kegs of ale!One of these vaults had previously been converted into a spa area with jacuzzi and steam room, the other was used as a storage area. The owners had previously had the storeroom tanked with a Type A, render system, however this approach repeatedly failed, allowing for substantial water ingress which was causing damage to items stored in this area.With Structural Waterproofing one of the major contributors to project failure lies with the design. When hiring contractors, ensure the design, procurement of materials and installation is undertaken by one specialist will naturally reduce these known and associated risks. A specialist contractor will always be able to offer quality assurances.
Sponsored
Ellis Guilford School

Ellis Guilford School

KWC DVS Limited

Ellis Guilford has over 1,300 hard-working and enthusiastic students studying under their roof. The school promotes a supportive and engaging environment where pupils can express their individuality, ambition, and drive. The school was looking for a washroom revamp that would keep with the school’s core values. Inspired Washrooms, a Nottingham-based fit-out company, designed a set of vibrant, contemporary, and practical washrooms with a range of specified KWC DVS products. The full range of products provided are as follows: • 4 x SOLX2400 Washtroughs with four wash places • 8 x DRYX600 Hands-in dryer Our Miranit range is durable and stylish. Our High Speed “Hands-in” hand dryer is suitable for wall mounting and made of an antibacterial ABS plastic, ideal for educational environments where a pupil’s hygiene and safety are paramount. Silver in colour, the dryer is modern in design, with an impressive drying time of 7-10 seconds, which is beneficial in areas of frequent use. The product is easy to clean and maintain thanks to an auto shutdown after 25 seconds feature and a separate water tank. Chris Kightley, Managing Director of Inspired Washrooms, commented, “We work with KWC DVS on a recurrent basis and can always count on them to provide us with quality products. A trusted partner, we’ve worked on many projects together. Their Miranit composite range and their Hands-in dryer were perfect for the colourful and functional washroom refurbishment the school was after.”
Sponsored
JACKOBOARD® Knutsford Swimming Pool Project

JACKOBOARD® Knutsford Swimming Pool Project

BEWI UK (JACKOBOARD®)

This amazing swimming pool refurbishment project in Knutsford, Cheshire was undertaken by Abstract Pools Ltd. Tiles from Designworks and more than 100 JACKOBOARD® construction boards were used.Manufactured with an extruded polystyrene (XPS) foam core and a special coating on both sides, JACKOBOARD® construction boards form an ideal base for tiling. The surfaces of the JACKOBOARD® system provide an extremely strong bond and can be used on virtually any substrate. The boards are waterproof, thermally insulating, truly lightweight and very strong. This combination of characteristics makes them ideal for pool hall work. The result of this refurbishment is absolutely stunning and the owners of the property are delighted unsurprisingly.The owner was abroad while the renovation was carried out. The pool was situated in the basement of the house and had been left empty for a few years. The contractor was tasked with refurbishing the pool hall and bringing it back to life. They stripped everything back to the existing substrate, and then rendered and screeded the pool itself, the jacuzzi and the pool surrounds.A new steam room was added, using JACKOBOARD®. All of the pool hall walls were lined with JACKOBOARD®, ready to receive tiles. All tiles on this project were supplied by Designworks Tiles, the specialists in tiles and mosaics for swimming pools and spas. The tiles used on the project were Ezarri Lisa Black Mosaic for the pool tank, District Grey 1200x600x10mm for the pool hall walls, District Dark Grey for the pool coping tiles and District silver 600x600x10mm for the pool floor surround
Sponsored
SOLUTIONS | Cairns Regional Council Vertical Expansion Stormflow Joints Replacement Project

SOLUTIONS | Cairns Regional Council Vertical Expansion Stormflow Joints Replacement Project

Five Star Products

Date of Project: September 2017Project Owner: Cairns Regional CouncilProject Contractor: Waterstop Solutions Pty, LtdProject Engineer: Cairns Regional Council Market/Environment WastewaterSubstrate: ConcreteSize of Project: 12 x 2m joint replacementTHE CHALLENGEThe joints on a municipal wastewater treatment tank had degenerated to the point where repairing and resealing were necessary. Cairns Regional Council required a product with a fast cure time and rapid compressive strength gains.Five Star® SolutionFive Star Structural Concrete® V/O was selected due to its rapid set and high early strength gains; it reaches 2,500 psi (17.2 MPa) within three hours. This rapid strength gain allowed for the repaired joints to be resealed with minimum turnaround time in preparation for the installation of a joint sealant system.ABOUT FIVE STAR STRUCTURAL CONCRETE® V/OThis is a high-strength, rapid-setting, one-component, permanent concrete repair material for vertical and overhead structural repairs.It produces a repair that is dimensionally stable, develops an integral bond to existing concrete, and restores structural integrity within hours of placement.Provides increased corrosion protection to steel-reinforced structures with migrating corrosion inhibitor technology and very low chloride ion permeability. Moisture-sensitive coatings can be applied in 8 to 24 hours.Can be troweled vertically or overheadOne product for thin and thick placementExcellent freeze/thaw resistanceOutstanding corrosion resistance for protection and rehabilitation
Sponsored
New Brabantia headquarters has a sustainable eye-catcher with living green walls

New Brabantia headquarters has a sustainable eye-catcher with living green walls

Mobilane

The new headquarters of interior design brand Brabantia in Valkenswaard was recently completed. Several green living walls have been installed in the office, contributing to the company’s sustainable image. The entire office was built according to the BREEAM standard, designed by Gert Jan Kruijning of AA Architects. The vertical greenery in the building was installed by Ten Brinke Interieurbeplanting.Sustainable DesignBrabantia’s new head office was built climate-neutral according to BREEAM standards. The building’s skeleton is made entirely of wood. The green walls in the office bring in the more natural look and also provide many benefits such as oxygen production and an improved indoor climate.Thomas Deenen, Commercial Director Brabantia Benelux & DACH: ‘Implementing vertical greenery in the design was an idea of the architect, following Brabantia’s requirements. The requirements were; lots of green, sustainable, pleasant atmosphere and a natural transition from outside to inside. The green living walls are a real eye-catcher, a real image-defining part of the interior. The vertical green looks very nice, gives a warm and natural feeling and a fresh smell’.Innovative and sustainable green wall systemThe green walls were installed by Mobilane dealer Ten brinke Interieurbeplanting using the LivePanel Indoor system. LivePanel Indoor is an innovative and sustainable system in the field of vertical greenery. It is suitable for installation against new and existing walls. It is possible to water the green walls manually, automatically or by means of a tank. For the walls at Brabantia, automatic watering was the option chosen.A century of quality and designBrabantia started out in 1919 as Van Elderen & Co in Aalst, producing milk churns, jugs, sieves and funnels. Over the years, Brabantia has grown into a global interior design brand, known for its smart and stylish household products.Client: BrabantiaArchitect: AA ArchitectenConstruction period: 2022Installation: Mobicare
Sponsored
Oval Village, London

Oval Village, London

FLOCONTROL LTD

A modern and green Mixed-Use project where people can live, work, shop, and play.  Oval Village is a major regeneration project in the South of London. It will include modern apartments, many new work opportunities, and aim to re-green the area resulting in better biodiversity.The first phase includes the apartment blocks Phoenix Court, Juniper Gardens and The Pinnacle offering modern homes with one-, two- and three-bedroom apartments. Between the buildings, landscaped gardens will offer room for relaxation and some of the buildings also provide access to private roof terraces. Residents will have a magnificent view over the Kia Oval cricket stadium and London’s iconic skyline. The project includes many sustainable initiatives such as attenuation rainwater tanks and recycled rainwater irrigation of green areas. A site-wide district heating network connected to solar panels and a super modern ventilation system shall secure low energy use whilst providing optimal indoor climate control. The space saving FloSet® Compact valve set is installed on each apartment’s FCU to handle heating and cooling duties. The FloSet® Compact was chosen as it is the smallest FCU valve set in the market for pressure independent automatic balancing and flow control. Each FloSet® Compact includes a FlowCon By-Pass Mini with only a 40 mm center distance, a FlowCon Venturi Metering Station, and a FlowCon PICV. The valve set is fitted directly over the FCU drip tray. The valve set offers 5 different operation modes. These include normal operation, back flushing, forward flushing, coil isolation/system flush and full isolation. The FlowCon PICV insert solution provides flexibility in all project stages from selection, setting and commissioning to servicing. All-together a compact and smart solution providing optimal indoor comfort, reduced energy consumption and a better building CO2 footprint.
Sponsored
Erith and East Ham Fire Station

Erith and East Ham Fire Station

Langley Waterproofing Systems Ltd

The purpose: Energy savings of £¼million over 20 years at just two of its sites are predicted to be achieved by London Fire Brigade through effective roof refurbishment using our Roofing Solutions. The brigade identified that the roofs at Erith and East Ham Fire Stations were in need of refurbishment. Numerous intermediate repairs had already been undertaken. An efficient solution was needed to help London Fire Brigade optimise best value in its asset management and reduce its requirement for planned- or unplanned- maintenance.London Fire Brigade therefore turned to Currie & Brown construction management consultants to oversee the design and execution of the refurbishment projects under a contract management framework agreement in place between the two organisations. We was called in to assess the roofs and advise on a course of action. Data driven roof condition reports from surveys were taken across the two premises. We highlighted that the roofs were beyond economical repair and needed new waterproofing and insulation- a U value of 5.00W/m2K was discovered in one roof area, against the Regulatory threshold of 0.35W/m2K and best practice 0.18W/m2K. Our solution: We advised that in the main, overlaying of the existing roof covering with CP-20 Paracoat Cold Polyurea Liquid System (warm roof) application was the most-efficient and cost-effective solution.The over-laying using the CP-20 system satisfies London Fire Brigade’s policy of preference for flame-free, with no roof replacement needed this minimised waste to landfill.Our Approved Contractor CWG Group won the contracts to undertake the upgrading, working to Langley’s detailed individual specifications for each site.At East Ham Fire Station, four main roof areas plus a separate ancillary building were addressed.LangGuard free-standing safety rail was installed around the perimeter of roofs 1 and 4.The final touch for the field roof area was provided with Paracoat Fast SF slip-inhibiting finish to agreed walkway areas.At Erith Fire Station, the refurbishment involved upgrading two roof areas including a rooftop tank room and adjoining canopy of corrugated PVC over the Station building, and a separate stores roof.
Sponsored
Southern Water Otterbourne

Southern Water Otterbourne

Polyroof Products Ltd

Working with Williams Roofing Contractors Ltd of Eastleigh, Hampshire, the winning project involved the refurbishment of a large water treatment plant that imposed stringent environmental and performance requirements.The outstanding workmanship and attention to detail by the Polyroof approved contractor during this large scale installation allowed this project to really stand out from the crowd. The below is a case study for this LRWA award-winning project, highlighting the many challenges and how they were overcome through innovation, workmanship and product choice.The SolutionFollowing a survey of the roof area conducted by Williams Roofing and Polyroof Technical Services, a detailed report was carried out after which a bespoke specification was produced and handed to the client. This document detailed a comprehensive set of recommendations for solving the issues that had arisen due to the aged condition of the roof coverings.The client, satisfied that the solution proposed would provide the lasting peace of mind they were looking for, awarded the contract to Williams Roofing Contractors Ltd to install the Polyroof Protec System.There were many challenges on this project as this was a live ‘Clean Water’ environment site, so all Williams Roofing Contractor staff on the project had to have the EUSR National Water Hygiene Cards and be fully inducted by Southern Water’s high standards. Working within these type of environments brings additional Health & Safety implications as the National Water Hygiene scheme is in place to ensure the protection of public health and promote safe drinking water practices. Further risks had to be considered and covered including the risk of working over open water areas with additional buoyancy aids on site to reduce the risks as described under CDM regulations.Williams Roofing Contractors Ltd had to be especially vigilant providing additional protection to ensure that no potential contamination or spills caused any contaminants to the clean water processes/water courses and environment with additional spill kits on hand. Due to the varying conditions of the roof construction(s)/substrates the preparation had to be thought through thoroughly. Certain roof areas needed to be scarified which would have caused reverberations through the roof/concrete deck. This would have possibly created contaminants by spooling of concrete/debris/dust to within the MF Compound Water Lanes/Tanks.
Sponsored
Floor Refurbishment | Sopro VS 582 Leveller and Mesh | Ciaran McAteer Contractors

Floor Refurbishment | Sopro VS 582 Leveller and Mesh | Ciaran McAteer Contractors

SMET Building Products Ltd

Tricky floor refurb? Our Smet Supported Partner, contractor, Ciaran McAteer uses a practical solution for the professional flooring contractor or tiler.  VS 582 is a self-levelling smoothing screed with excellent mouldability for laying to falls. A flexible, self-levelling, mouldable, rapid-set, cementitious, fibre-reinforced surface filler, with 2-in-1 formulation for simultaneous levelling and creation of falls. Excellent workability and mouldability because you also have the flexibility of adding water.It’s strong, with a compressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls), dries quickly and is pumpableBenefits of Sopro VS 582:3 – 70 mm coat thickness For floors, indoors and outdoors2-in-1 formulation: suitable as self-levelling filler and for laying to fallsCompressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls)Flexural tensile strength after 28 days: approx. 7 N/mm² (as levelling coat laid to falls)Self-levellingOutstanding mouldability when laid to fallsQuick-dryingFlexible, fibre-reinforcedPumpableSuitable for timber flooringSuitable for floor heating systemsLong working life: 30 – 40 minutesWalkable after 2 – 3 hoursNo client is too large or too small, SMET delivers another innovative, showcase flooring solution. Click here at other jobs using our Sopro levellers.SMET is renowned for its comprehensive range of professional CE marked, EPD certified products. The SMET flooring range includes; calcium sulphate-based screed binders, self-smoothing calcium sulphate-based screeds & compounds, cement-based screed binders, self-smoothing cement-based screeds, lightweight flowing screeds, professional tiling materials & tools, tanking and wet-room solutions, barrier coats, primers & bonding agents; for any domestic, commercial, industrial or design-flooring use.Suffice to say, the SMET product portfolio includes a German-made floor solution for any new or repair flooring requirement. Get in touch for your upcoming floor screed or tiling project.
Sponsored
LIDL North Hykeham | SMET Bauprotec Render Spec | Adston Construction

LIDL North Hykeham | SMET Bauprotec Render Spec | Adston Construction

SMET Building Products Ltd

Smet Supported Partner, Adston Construction, machine applied the LIDL External Render System onto Poroton blocks consisting of a Base Coat of Bauprotec 850 M – Lightweight Lime Cement Render, Façade System Primer and a Finish Coat of Mineral Finish Coat. The Plinth Render used is Bauprotec SLP – Lightweight Plinth and Tanking Render. Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete: Bauprotec RHS was used.The Internal Render System specification onto Poroton blockwork consists of Single Coat: Bauprotec 850 M, Lightweight Lime Cement Render. A smooth finish is required in the sales area, so either 850M steel trowelled smooth or skim finished. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS used.The LIDL render system, available from SMET:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced, mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.CASEA Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET. SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering Contractors across the UK and ROI. If you need to speak to us - click to contact SMET.All LIDL spec SMET Render System products are available from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.
Sponsored
Rolls Royce - HAG supplies doors for the worlds largest exhaust pipe

Rolls Royce - HAG supplies doors for the worlds largest exhaust pipe

HAG Ltd. - The Door Specialists

2021 sees Rolls Royce unveil Testbed 80, the world’s largest & smartest indoor aerospace testbed, as part of a £90million investment. It has been a hard year for the aerospace industry, with production slowing, and cuts in jobs, however this ground breaking facility shows Rolls Royce’s confidence in the future of aerospace for decades to come.HAG Ltd. have proudly worked alongside Buckingham Group to assist in this ground breaking facility that will not only test propulsion systems of the future, but also secure jobs in Derby, UK for many years to come.HAG Ltd. were tasked with designing & manufacturing a roller shutter for this distinctive & state of the art facility, to enable Rolls Royce to test the largest, smartest and most powerful engines in the world by MDS Aero Support Corporation of Ottawa, Canada.HAG Ltd. designed, manufactured and installed 2 Armourguard F1 insulated roller shutters that were 7.5m by 15m. The F1 model is a high quality insulated security shutters delivering the highest level of security and offering thermal protection. A composite of foam filled sections is encased in a flat double skinned interlocking galvanised steel lath.The project:£90million project3 years of construction7,000 square metres, the same size as a Premier league football groundHouses the world’s largest exhaust pipeContains 3,218 tonnes of steelAnd 27,000 metres3 of concreteEquipped with a 40,000 litre fuel tankCapable of testing engines on Sustainable Aviation FuelThe most capable & complex testbed ever designed & builtWarren East, Chief Executive, Rolls-Royce, said: “Testbed 80 is the largest facility of its type in the world. However, it is not only big, it is also smart and features the most advanced testing technology we have ever used. As the new global hub of our testing capability, it will support the next stage of our UltraFan programme as we begin ground testing the first demonstrator in 2022. This incredible piece of infrastructure is a very visible sign of our commitment to this site and secures the future of Derby as the home of large engine development, continuing a history that began in the late 1960s with the RB211.”HAG Ltd. are proud to be part of this monumental development in the aviation industry.
Sponsored
NIBE Ground Source Heat Pump Commercial Installation

NIBE Ground Source Heat Pump Commercial Installation

NIBE Energy Systems Ltd

Teesside-based logistics firm AV Dawson has built a new 130,000m3 warehouse specifically to store £15m-worth steel coils for a nearby international car manufacturer. With the steel at risk of ‘sweating’ and rusting in high humidity levels exceeding 65%, the company was tasked with ensuring a very specific climate for the warehouse (without which the steel would be rendered unusable), while also maintaining low energy costs.The SolutionHoward Tribick, director at local renewable energy specialist and NIBE Pro Installer HT Energy, specified, designed and fitted ten NIBE F1345 ground source heat pumps (GSHPs). Given the site is built on top of an active water table (the River Tees), Howard and the team were able to make the most of the surroundings as a natural energy source. The heat pumps collect heat from 70 bore holes, each 150m deep – a total of 10,500m of active bore hole depth. Each 60kW GSHP is paired with its own ventilating unit and 500L NIBE UKV buffer tank – producing a total output of 600kW. Solar panels on the roof provide an additional 220kW to help meet the warehouse’s electricity needs.ResultsWith the ten GSHPs now fully operational, the results have been even better than expected – with a seasonal performance factor (SPF) of 3.65 and average humidity levels of just 47%. Interconnected with 3km of header pipes, the GSHPs are spaced equidistantly along one side of the 264m-long building. The units are set up as separate systems, so they can work independently of each other or together as required. This provides an added level of security for the customer, ensuring the system can cope at all times and the steel is kept at optimum conditions.Customer Testimonial“This system made perfect commercial sense for us. While the initial outlay was greater than some of the other alternatives, GSHPs provided the most cost-effective solution by far in the long term. In fact, compared to natural gas, we will be making an impressive energy saving of 1.58 million kW/h each year. Our projected payback period is just ten years and we’re also benefiting from Renewable Heat Incentive (RHI) payments for each unit of renewable energy we’re generating.”Gary Dawson, managing director, AV Dawson
Sponsored
Springfield University Hospital, UK

Springfield University Hospital, UK

Altro

Altro provides durable solution for seclusion room at psychiatric hospitalAltro Zodiac, Altro Aquarius, Altro Whiterock DigicladSpringfield University Hospital is a psychiatric hospital in Tooting, South London and also the headquarters of the South West London and St George’s Mental Health NHS Trust. Springfield University Hospital has been the primary location for mental health services in south west London for over 175 years. The Trust serves 1.1 million people across the London boroughs of Kingston, Merton, Richmond, Sutton and Wandsworth and employ more than 2,000 staff who provide care and treatment to about 20,000 people from south west London and beyond at any given moment.The hospital has a seclusion room with ensuite bathroom facilities for service users. The room was already installed with Altro Zodiac smooth flooring in the room, and Altro Aquarius safety flooring in the bathroom. The Trust added Altro Whiterock Satins and Altro Whiterock Digiclad on the walls to create a fully tanked room with one part joints, making the room resilient and secure. Altro Whiterock was also thermoformed into all the window frame reveals for extra security.The Director of Nursing and Quality commented: “In creating a new seclusion space on the Psychiatric Intensive Care Unit (PICU), we wanted to create a secure but therapeutic environment for our service users. We were able to take advantage of the ability to print a large image across one complete wall. The result is that we have a fantastic soft- focus leaf image with warm autumnal colours, which helps create a sense of calm.”Altro Whiterock Digiclad is created by reproducing a photographic image or vector art onto Altro Whiterock wall sheets, with consistent, photographic quality. Hard-coat technology provides scratch-resistant properties for added surface protection, making Altro Whiterock Digiclad ideal for areas where durability is important. In the seclusion room a calming image of autumn leaves was used to brighten the room and create a visual focal point.Altro Aquarius is a specialist safety flooring developed for use in wet and dry environments, providing optimum slipresistance for shoe and bare foot use for the lifetime of the flooring, and a colour range ideal for creating home from home environments. Combined with Altro Whiterock Satins, it can create an impervious and easy to clean surface from floor to ceiling that meets strict hygiene standards.
Sponsored
Lidl Andover | SMET Bauprotec Render System | B Team Shopfitters

Lidl Andover | SMET Bauprotec Render System | B Team Shopfitters

SMET Building Products Ltd

DescriptionSmet Supported Partner, B Team Shopfitters machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render and as Finish Coat; Mineral Finish Coat K.  As Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render with the addition of Bauprotec SLP for plinths.The Internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET. SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.Related DownloadsTDS CASEA Bauprotec 850 M – Lightweight Lime Cement RenderTDS CASEA Bauprotec RHS – Multi-Purpose RenderTDS CASEA Bauprotec SLP Tanking and Plinth RenderTDS CASEA Mineral Finish Coat – KSMET Render and Plaster Product Selector

Showing 37-51 of 51

Feedback