"smoke heat exhaust and ventilation systems"

application area: commercial gas heatinguse type: condensing gas boilersproject scope: line commercial freestanding chimney for condensing operationadded value: corrosion-resistant, air-tight and waterproof finishBackgroundThe combustion gases from the school's boiler room are exhausted through a freestanding 28-metre brick chimney. The structure was not suitable for the wet operation of condensing boilers. FuranFlex-25 Black was the chosen lining material.The new boiler plant required a 500mm diameter flue liner but the chimney could not accommodate a rigid liner this size. A FuranFlex25 Black liner was therefore specified as it expands into the rectangular flue shape when inflated with steam.Statement of workFuranFlex25 comes as a folded and soft tube. Inflating with steam irreversably hardens the liner fixing it in place. Within a few hours of steaming the liner was ready for connecting to the boilers. The appropriate adaptors/terminals were fitted making the chimney ready for operation.

The San Siro playing field was designed to be heated using an under-soil system featuring single-head, in-line electronic pumps. In the wider facility areas, a heating substation was installed, incorporating wet-rotor circulators and in-line electronic pumps for the climate conditioning systems. Additionally, co-generation systems with both single-head and twin-head in-line electronic pumps were implemented for auxiliary plants dedicated to heating energy production.Despite the initial investment in inverter technology for the pumps, the operational optimization results in a lower running cost, showcasing a great example of an energy efficient installation.

As the leading manufacturer of fire and smoke curtains, Coopers were appointed to develop a smoke curtain system to provide an unintrusive method capable of controlling smoke migrating from the lower floors. It was also necessary to protect the un-insulated glazing installed above the atrium’s reception area with an approved fire curtain barrier system approved to provide a one hour insulating zone. Coopers manufactured, installed and commissioned two SmokeStop smoke curtains developed to control smoke generated in the event of fire and effectively channel it away from occupants during evacuation.

Coopers solution was to install over 100 SmokeStop smoke curtain barriers. Concealed within the ceiling voids of each of the 39 floors, the SmokeStop smoke curtain barriers were developed to deploy in the event of fire, channelling smoke away from occupant and out of the building. This effective strategy for containing and channelling smoke would ensure that Gherkin’s 41 floors were protected from filling with smoke and provide occupants with a safe means of escape.

application area: commercial ventilationuse type: offices, choir roomsproject scope: reline with minimal access to ductadded value: 25-year guarantee on air-tight and one-piece linerBackgroundThe 12 existing chimney flues had to be lined to be made suitable for ventilation to serve the newly refurbished building. From each room the flues were lined with VentilFlex-25 Green up to the attic level and out the top of the chimney. The team had to carry out a precision job in a confined space with minimal access to the duct.Statement of workVentilFlex-25 Green was chosen for this project because of its versatility and its long life span. The liner is light and comes as a soft and folded tube, which makes it easy to transport and to lower into the ventilation duct. Once in position, the liner is inflated and heated up, gradually assuming and maximising the internal dimensions of the existing ventilation duct. The resulting one-piece liner is corrosion resistant, completely air-tight and it carries a comprehensive 25-year guarantee.

The revolutionary, award-winning underfloor heating system Schlüter-BEKOTEC-THERM was the natural choice for one of the UK’s greenest self-build projects.

Coopers were commissioned to design and manufacture a bespoke curtain barrier system that, in the event of fire, would guard against smoke penetrating the upper floors of the store. Through regional partner Souchie, Coopers installed a series of Smoke Stop™ vertical smoke curtains above each escalator specifically designed to protect the means of escape for customers, whilst at the same time dramatically reduce the transmission throughout the building of life threatening gases generated by fire.

A new ferry terminal on Brodick Bay, created as a tourism and community gateway to the Scottish Isle of Arran, has been fitted from stem to stern with door and window systems supplied by GEZE.Maritime design and modern comfortThe ship-shaped terminal, designed by the renowned architectural firm Norr of Glasgow, is part of a £30 million investment which aims to update the harbour, get it ready for 21st century travel, and improve passenger comfort.Natural ventilation thanks to automated windowsThe generously sized lounge with its double height and large wall of windows on the western façade offers visitors a breathtaking view of Brodick Bay. The large windows, which are automatically opened and closed by 30 GEZE Slimchain chain drives, give the reception area at the main entrance to the building a bright and spacious feel. The uniquely slim and understated look of the Slimchain window drives integrates perfectly into the unique façade design of the Brodick ferry terminal.The Slimchain window drives were installed not only on the large windows in the lounge, but rather throughout the entire two-storey building – with the exception of the upper ventilation openings: Powerchain chain drives are used there. These especially powerful window drives were chosen to operate the larger windows, since they allow for large opening widths – which is important for quickly venting smoke in case of a fire.The window drives are connected to a GEZE MBZ 300 SHEV control panel for smoke and heat extraction drives, which is integrated into the building management system of the terminal. This makes it possible to easily control and monitor the complex natural ventilation system.Ventilation, smoke and heat extraction, and emergency exit protectionThe windows in the staircases are also equipped with Slimchain chain drives. If needed, the window systems also allow for natural smoke and heat extraction: In case of smoke and heat, the smoke extraction solutions open the windows and control fresh air openings, so that lifesaving escape routes remain smoke-free and safe to use in case of an emergency. In addition, GEZE OL Line manual fanlight openers provide supplementary natural ventilation.Door systems for accessible fire protection doorsBeneath the glazed western elevation are two automatic swing doors to either side. These are powered by GEZE Slimdrive EMD-F door systems, just like another door on the side façade of the building. The electro-mechanical swing door drives for single leaf fire and smoke protection doors are extremely versatile: They provide power assisted opening and can be initiated using the operating button with constant opening and closing speed. Integrated obstacle detection also identifies potential obstacles and stops the opening or closing process if needed. By doing so, Slimdrive EMD-F drives also ensure easy and safe access for people with mobility issues.Understated design and high access convenienceFrom the main entrance, a glazed corridor leads to a bi-parting sliding door powered by a GEZE Slimdrive SL NTsliding door system, which leads into the foyer of the main reception area. The Slimdrive door drive fulfils two key stipulations here at once: It is suitable for interior and exterior doors with high levels of footfall, and ideally suited for glass façades with high design standards – such as the Brodick ferry terminal – due to its low operator height of just 7 cm.

Teesside-based logistics firm AV Dawson has built a new 130,000m3 warehouse specifically to store £15m-worth steel coils for a nearby international car manufacturer. With the steel at risk of ‘sweating’ and rusting in high humidity levels exceeding 65%, the company was tasked with ensuring a very specific climate for the warehouse (without which the steel would be rendered unusable), while also maintaining low energy costs.The SolutionHoward Tribick, director at local renewable energy specialist and NIBE Pro Installer HT Energy, specified, designed and fitted ten NIBE F1345 ground source heat pumps (GSHPs). Given the site is built on top of an active water table (the River Tees), Howard and the team were able to make the most of the surroundings as a natural energy source. The heat pumps collect heat from 70 bore holes, each 150m deep – a total of 10,500m of active bore hole depth. Each 60kW GSHP is paired with its own ventilating unit and 500L NIBE UKV buffer tank – producing a total output of 600kW. Solar panels on the roof provide an additional 220kW to help meet the warehouse’s electricity needs.ResultsWith the ten GSHPs now fully operational, the results have been even better than expected – with a seasonal performance factor (SPF) of 3.65 and average humidity levels of just 47%. Interconnected with 3km of header pipes, the GSHPs are spaced equidistantly along one side of the 264m-long building. The units are set up as separate systems, so they can work independently of each other or together as required. This provides an added level of security for the customer, ensuring the system can cope at all times and the steel is kept at optimum conditions.Customer Testimonial“This system made perfect commercial sense for us. While the initial outlay was greater than some of the other alternatives, GSHPs provided the most cost-effective solution by far in the long term. In fact, compared to natural gas, we will be making an impressive energy saving of 1.58 million kW/h each year. Our projected payback period is just ten years and we’re also benefiting from Renewable Heat Incentive (RHI) payments for each unit of renewable energy we’re generating.”Gary Dawson, managing director, AV Dawson

With state-of-the art facilities and interior design features throughout, it is little wonder that AccorHotels UK wanted to create a warm, welcoming and unforgettable first impression as guests entered their £90 million hotel. Whilst researching options, Joey’s team came across Dimplex’s Opti-myst® effect, which uses unique, state-of-the-art, patented technology to create the world’s most realistic electric flame effect – a highly convincing illusion of ‘flames’ and ‘smoke’.

Nestled in the vibrant heart of London, Sancroft is an office building that stands tall, a commanding structure that spans over 10 floors with 2 levels of basement with a GIA of circa 429,000sqft. When the building’s architects, Buckley Gray Yeoman Ltd, were tasked with providing intensive ventilation in the building, they turned to Price Engineered Solutions for advice. Price Engineered Solutions, renowned for their leadership in supplying heating and ventilation components for key projects across the UK. They recommended the architects to work with DUCO for the installation of intensive ventilation. A Breath of Fresh Air: Continuous louvre walls with value for moneyTo ensure the Sancroft building is ventilated naturally and continuously it was decided to install the sturdy, robust aluminium louvre-wall system, DucoWall Screening 70 & 75.John Biss, Contracts Manager from Price Engineering Ltd, explains: “The selection of the DucoWall Screening 70/75 was purly down to our recommendations and budget constraints. DUCO's louvre-wall system emerged as the ideal choice in terms of cost-effectivness.” Innovative design and aesthetic appearanceWhat sets this project apart is its innovative design, which distinguishes it from the neighbouring structures.John Biss continues: “This project is truly unique due to its innovative design. For instance, we had to incorporate bracketry to support a wire trelis that over time, will host climbing plants. . The sleek appearance of the DucoWall Screening adds to the uniqueness of the building”.Super-quick assembly and high airflowThe Z-shaped louvre blades of the DucoWall Screening are clicked directly onto the support section thanks to a direct clip system, ensuring super-quick assembly. The very large span and high airflow of the louvre wall ensures high ventilation values and thus an optimal indoor climate for all office workers present.John Biss : « With Duco’s patented ‘Direct Clip’ system, the louvre blades are clicked onto the support section directly, ensuring fast installation. In a world where everything has to be delivered very quickly and the next job is waiting in line, this is a very welcome asset!”Fine collaboration and postive feedbackThe collaboration between other parties, such as Britplas, leading commercial glazing specialist in the UK, and the engineers and contractors was very great. We had open communications between all parties involved which led to yet another project going off without a hitch”. Our client expressed profound satisfied, not only with the DucoWall Screening louvre wall but also with our adapt management of the design and installation process all while minimizing disruptoin to other trades” As John Biss aptly concludes,” We’ve delivered a project that exceeds expectations, offering a breath of fresh air in every sense” Architect: Buckley Gray Yeoman LtdBuilding contractor: Price Engineered SolutionsCommercial glazing specialist: Britplas     

Discover the transformative impact of innovative ventilation and sun control systems tailored for commercial spaces. In the bustling landscape of Spitalfields Market, the quest for optimal indoor climate management led to a collaboration with DUCO for their groundbreaking continuous louvre wall system and architectural sun protection system.Efficiency redefined for dynamic environmentsThe installation of DucoWall Classic 45 HP continuous louvre walls at Spitalfields Market highlights the significance of intensive ventilation. Engineered to offer unparalleled efficiency, this system excels in facilitating substantial airflow while minimising resistance. It's a solution that ingeniously maximises air movement within confined spaces, ensuring a fresh and invigorating environment.Explore our continuous louvre wallsPromoting healthier indoor air qualityIn crowded commercial settings like Spitalfields Market, maintaining a healthy indoor climate becomes paramount. Tom Revitt, UK & I Sales Manager at DUCO, underscores the critical role of ventilation in such spaces:“The DucoWall Classic W 45HP continuous louvre wall stands out not only for its exceptional airflow but also for its sleek and aesthetically pleasing design. It's a seamless integration of form and function, specifically tailored for ventilation to large plant areas that demand both efficiency and visual appeal.”Revolutionising intensive ventilation with DucoGrille Classic F 45 HPAs a pioneering system tailored for intensive ventilation, the DucoGrille Classic F 45 HP marks a significant stride in optimal air movement solutions. Its design, specifically engineered for spaces demanding high airflow rates, ensures an unparalleled level of performance.Tony Colborn, Director Conttego building façade solution provider:"At Spitalfields market, the DucoGrille Classic F 45 HP is installed above glazed window lines for extraction of contaminated air and odours at food vendors. With an exceptionally low resistance factor, this system redefines efficiency by maximising airflow while minimizing energy consumption. Its installation at Spitalfields Market demonstrates its capability to create a controlled, refreshing indoor environment by efficiently purging stale air and introducing fresh air, essential for occupant comfort and well-being.”Discover our intensive ventilation gamutSymbiosis between shielding and sun protectionDucoSun Ellips emerges as an ideal solution to screen off areas, as is the case at Spitalfields Market. Tony Colborn continues: “At Spitalfields, this system is used as privacy screening to screen the park at the side of the building looking directly into the windows of the offices above the retail areas.” The integration of DucoSun Ellips underscores not just technological advancement but a meticulous balance between functionality and architectural finesse, that shields unwanted glances from outside while harmonising with the building's design ethos. But the product has a third asset. For it also ensures that large areas of glass are protected from direct sunlight, ensuring a pleasant indoor climate for everyone."Explore our architectural solar shading gamutTransforming commercial spaces with ventilation excellenceIn a landscape where ventilation and sun control solutions are paramount for comfort and well-being, DUCO's innovative products emerge as game-changers. The integration of these advanced ventilation and sun control systems at Spitalfields market underscores their ability to redefine the standards of indoor climate control, promising a refreshing, invigorating experience for both occupants and visitors alike.A testimonial of excellent functional and aesthetic valuesThe project proceeded seamlessly, culminating in the Main Contractor's satisfaction with the final outcomes. Overall, this project stands as an exemplary reference, showcasing functional and aesthetic excellence.

A Uflex underfloor heating system consisting of fifteen zones has been installed as part of a barn conversion project in Thirsk, North Yorkshire. Here, we talk to Oliver Carter Plumbing and Heating, the G1 installer who completed the installation, to discover how they found working with the new Uflex underfloor heating range from Grant.

A family home in Wiltshire has made the move from a gas central heating system to a renewable solution featuring an Aerona³ air source heat pump, a solar thermal system and QR hot water cylinder all supplied by Grant UK, helping the household to reduce their dependency on fossil fuel and lower their energy bills.

Hull homeowner Ben Andrew is watching his home energy bills carefully to measure the benefits of switching from an all-gas heating and hot water system to a combination of gas boiler and air source heat pump.

South Lanarkshire College (SLC) in Scotland has opened a new, ‘zero-energy’ teaching block on its East Kilbride campus. Specifically designed with first-rate environmental credentials in mind, it boasts a whole host of efficiency-enhancing measures – including highly insulated floors, walls and roofs, triple-glazed windows, low-energy lighting and electrics, rainwater harvesting and solar PV panels on the roof. The college approached NIBE Pro Installer Anderson Floor Warming and Renewables in search of a system that would meet the heating requirements of the eight-classroom block in the most sustainable, cost-effective and reliable way possible.The SolutionSLC already has a range of NIBE products in its on-site renewables training centre, which students use for practical sessions, so a heat pump from NIBE was the natural choice to heat the new block. Mike Anderson, director at Anderson Floor Warming and Renewables, specified, designed and fitted a NIBE F1345 40kW ground source heat pump (GSHP) system to complement the building’s water-based underfloor heating, which operates at similarly low flow temperatures.ResultsNow up and running, the NIBE system is so efficient that it has been awarded a rating of A+++ in line with energy labelling criteria under the ErP Directive. SLC’s new teaching block has become the first building in the UK to achieve a BREEAM sustainability rating of ‘Outstanding’, with the facility excelling in all 10 assessment categories – from energy, waste and water to health and wellbeing.Customer Testimonials“We pride ourselves on our forward-thinking approach to sustainability at SLC, and we couldn’t be happier that our new teaching block has been deemed ‘Outstanding’ by BREEAM assessors. The NIBE heat pump system and the solar PV panels combined generate enough renewable energy to meet the block’s entire heating and power needs, making it a ‘zero-energy’ building. It really is a huge asset to the whole college – not only from a resource point of view, but also as a real-life example of sustainability in action. As well as being a valuable learning space for our construction and energy students, it’s a place for us to bring local businesses and community groups, and showcase the benefits of low-carbon, low-resource buildings first-hand.”Stewart McKillop, principal at South Lanarkshire College

Hexham and Northern Mart is an auction house in Hexham (25 miles west of Newcastle), specialising in the sale of livestock and cattle to farmers across the North East of England. The business decided it was time to replace its old gas-fired heating system with a more sustainable alternative – one that would not only reduce energy consumption and running costs, but also earn additional income through the Renewable Heat Incentive (RHI). Minimising impact on day-to-day operations during the transition was another key consideration. Managing director Robert Addison tasked renewable energy specialist and NIBE Pro Installer Calibrate Energy Engineering with finding the right solution to meet the heating and hot water demands of the 112,050sq ft building.The SolutionThe team at Calibrate specified, designed and installed a 300 kW renewable heating system made up of five 60 kW NIBE F1345 ground source heat pump (GSHP) units. They paired this with a 50 kW solar PV array, fitted to the roof of the main pen area, which partially powers the NIBE GSHP system. The in-ground heat collectors required for the GSHP were laid in the fields around the buildings, with the controls units sited in a prefabricated plant room to the rear of the premises. The installation took just three months from start to finish, and during this time it was business as usual for Hexham and Northern Marts.ResultsDocked together in a cascade for greater output capacity, the five NIBE F1345 GSHP units now meet 95% of Hexham and Northern Marts’ 394,000 kW/h annual heating and hot water demand. Meanwhile, the 50 kW solar PV array generates enough free electricity to offset a significant 50% of the power needed to run the GSHP system. Hexham & Northern Marts is set to make a 236% return on investment – reaping an estimated £862,000 in energy savings and commercial RHI payments over the next two decades.Customer Testimonial“We couldn’t be happier with our new renewable heat and power sources. As well as delivering instant reductions in energy usage and subsequent savings on heating bills, the NIBE GSHP solution is providing us with a steady stream of income for the next two decades, thanks to the RHI. The power produced by the solar PV panels is an added bonus, and makes running the heat pump system even more cost-effective.“As a result, we’re expecting to see returns of more than double our original investment over the next 20 years – which is absolutely invaluable from a business point of view. Not only this, but we’ve got an efficient, reliable renewables setup that’s fit for the future, and will continue to deliver ongoing savings for years to come.”Robert Addison, managing director, Hexham & Northern Marts

Duco responds to the requirement to create a healthy as well as (acoustically) comfortable indoor climate by using self-regulating window ventilators in the form of DucoFit 50 ‘SR’, DucoMax ‘SR’ and GlasMax ‘SR’. “DucoFit 50 ‘SR’ lends itself perfectly for use on the lower floors of the tower blocks whereas DucoMax ‘SR’ and GlasMax ‘SR’ window ventilators are eminently suitable at heights between 20 and 40 metres.

2021 sees Rolls Royce unveil Testbed 80, the world’s largest & smartest indoor aerospace testbed, as part of a £90million investment. It has been a hard year for the aerospace industry, with production slowing, and cuts in jobs, however this ground breaking facility shows Rolls Royce’s confidence in the future of aerospace for decades to come.HAG Ltd. have proudly worked alongside Buckingham Group to assist in this ground breaking facility that will not only test propulsion systems of the future, but also secure jobs in Derby, UK for many years to come.HAG Ltd. were tasked with designing & manufacturing a roller shutter for this distinctive & state of the art facility, to enable Rolls Royce to test the largest, smartest and most powerful engines in the world by MDS Aero Support Corporation of Ottawa, Canada.HAG Ltd. designed, manufactured and installed 2 Armourguard F1 insulated roller shutters that were 7.5m by 15m. The F1 model is a high quality insulated security shutters delivering the highest level of security and offering thermal protection. A composite of foam filled sections is encased in a flat double skinned interlocking galvanised steel lath.The project:£90million project3 years of construction7,000 square metres, the same size as a Premier league football groundHouses the world’s largest exhaust pipeContains 3,218 tonnes of steelAnd 27,000 metres3 of concreteEquipped with a 40,000 litre fuel tankCapable of testing engines on Sustainable Aviation FuelThe most capable & complex testbed ever designed & builtWarren East, Chief Executive, Rolls-Royce, said: “Testbed 80 is the largest facility of its type in the world. However, it is not only big, it is also smart and features the most advanced testing technology we have ever used. As the new global hub of our testing capability, it will support the next stage of our UltraFan programme as we begin ground testing the first demonstrator in 2022. This incredible piece of infrastructure is a very visible sign of our commitment to this site and secures the future of Derby as the home of large engine development, continuing a history that began in the late 1960s with the RB211.”HAG Ltd. are proud to be part of this monumental development in the aviation industry.

Protecting detection systems is vital to fire safety with only a functioning smoke alarm able to protect you in an emergency.Landlord regulations and Government policesLandlords have responsibilities to keep tenants safe in their properties by providing functioning life safety equipment.Regulations introduced in 2015 require private sector landlords to ensure they ‘have at least one smoke alarm installed on every storey of their properties’ as a legal requirement.There is also a proposed change to this regulation, coming into effect later this year, which will mean social housing is also included, making it mandatory that all rented accommodation must have working smoke alarms fitted. It will also be compulsory for landlords to repair or replace any faulty alarms as soon as they are made aware of defects.Fines up to £5000To protect their tenant, it is the landlord’s responsibility to ensure detectors are fitted and working at the start of every new tenancy agreement. Failure to comply with The Smoke and Carbon Monoxide Alarm Regulations introduced in 2015 can result in a hefty fine of up to £5000.One exasperated landlord wrote online that in one of his properties “Two of the detector heads have been tampered with, presumably so that the tenants can smoke in their rooms”. Consequently, this had been causing false fire alarms and it is up to the landlord to repair or replace the alarm.In some extreme cases, landlords have discovered that smoke alarms have been removed all together from properties, due to disturbances when cooking, smoking, etc. It is then up to the landlord to replace the alarm, and so it is advisable to invest in measures to prevent the alarms removal; some recommendations have been made in government legislations such as BS 5839-6:2019.Ultimately, landlords should feel obligated to ensure regular testing of smoke alarms and the replacement of batteries in their properties to reduce the risk of void insurance or a remedial notice. Simply testing smoke alarms can also help to prevent any danger to tenants and damage to properties should a fire occur.BS 5839-6:2019The latest recommendations in BS 5839-6:2019 are primarily concerned with saving lives and reducing injuries caused by fire, but also covers reducing property damage, which can be extremely costly to landlords in the case of fires.The guidance in BS 5839-6:2019 suggests that in environments such as HMOs, where multiple occupants can be disturbed by false alarms, landlords could alter their smoke alarms systems to have delays before the signal is sent to all tenants for the occupier to investigate the cause. This can help to reduce complacency during false fire alarms or the temptation to dangerously compromise smoke alarms.The recommendation also states that landlords should seek alternative smoke alarms that can alert to intervention or disablement of the alarm in the event of tenants continually tampering.Tenants’ responsibilityAlthough it is the landlords legal duty to provide working smoke alarms in all properties, tenants must not tamper with smoke alarm, remove them, cover them up or in any other way damage or prevent them from operating in their intended manner. Failure to comply with this could result in the tenant facing a substantial fine, or termination of their tenancy agreement.It falls to the tenants to take their own safety into consideration and should contact landlords if there are any issues with smoke alarms, such as false fire alarms, so their landlord can test and replace the batteries, or alarms themselves if necessary. Preventing alarms from effectively detecting fires can result in fatal incidents and also fines for misconduct falling to the tenants.One student at Edinburgh University covered the smoke alarm in his room with bubble wrap whilst living in student accommodation. Preventing the smoke detector from working effectively proved a dangerous mistake when a fire started in his room and he had to be pulled to safety after being found struggling to escape the flames while the building was being evacuated. As a consequence for this reckless behaviour, he was fined and ordered to pay £1000 in compensation after being arrested and pleading guilty.Steel Web Stoppers®  Safety Technology International is a specialist manufacturer of a range of fire, safety and security products; their wire cages help to prevent tampering with essential life safety equipment, such as smoke alarms.STI’s Steel Web Stoppers®  are designed to protect against vandalism, misuse and damage to smoke and fire detectors. Constructed from plastic coated, heavy-duty galvanised steel rod, the Steel Web Stoppers can withstand the severest of abuse from vandalism or accidental damage. It also prevents tampering with the alarm, without hindering legitimate use, therefore still allowing the landlord to service the device and replace batteries when appropriate.

Holland Park Villas has set a new benchmark for quality in the super-prime central London residential development market. Unparalleled interior finishes combined with exceptional landscapes to show what a truly world-class team can deliver.On arrival, an impressive 30 year old Acer Palmatum tree takes centre stage. Granite paving, hornbeam trees, ornamental planting and a water wall further add to this sense of elegance and quality.This level of quality and attention to detail continues to areas not easily seen by the new tenants. Around 13,200 m2 of Soundis High density dry screed panels able to span between joists were installed by our installation partner UK Acoustic Systems as a raised access floor system. Chosen primarily for the ease of maintenance and future extensions of the underfloor network, the system is also an integral part of the underfloor heating system.Not only does this system demonstrate its practical heating properties, but the new apartments will also benefit from the pleasant acoustic characteristics provided from the floor system.

OverviewPowrmatic was selected to supply a manufacturing facility heating system in a new 60,000sq.ft building in Manchester which was expertly installed by our trusted and long-standing engineers at Swiftheat Gas Services Limited. Four LX60 heaters, one LX90, and eight CECx4500 destratification fans were installed into the facility.Project BackgroundSystem 3 Limited, a leading manufacturer of high-specification insulating glazing sealed units and toughened-laminated glass, was expanding production into new premises. They needed a reliable and efficient heating solution for their newly refurbished premises. Swiftheat was recommended by Powrmatic, a family-run business with a reputation for providing commercial heating solutions and industrial heating installation.SolutionSwiftheat Gas Services Ltd provided a complete installation of the heating system for System 3’s new premises. The installation consisted of 5 ErP-compliant suspended LX60 and LX90 warm air gas heaters and eight CECx destratification fans to assist with air circulation. The building size was 60,000sq.ft, and the entire project required an 88.9mm stainless steel gas line.ResultSwiftheat Gas Services Ltd provided a complete installation of the heating system for System 3’s new premises. The installation consisted of 5 ErP-compliant suspended LX60 and LX90 warm air gas heaters and eight CECx destratification fans to assist with air circulation. The building size was 60,000sq.ft, and the entire project required an 88.9mm stainless steel gas line.

Background to the projectSouthway Housing Trust is a South Manchester based housing association managing 6,000 local homes.Southway has pledged to be zero-carbon by 2038 and has identified switching its homes from gas to electric heating as crucial to achieving this target.In 2022, a survey of Southway’s residents found that 88% were keen to reduce their impact on climate change, and Southway’s commitment to reducing carbon is in line with Manchester City Council’s net-zero ambitions.The Arrowfield Low Carbon Living Project represents an early and ambitious retrofit of a south Manchester neighbourhood that will reduce the estate’s carbon footprint by as much as 50%.Southway is replacing 396 of Arrowfield’s inefficient gas boilers in-line with long term government plans to electrify heat and will also improve the fabric of homes to make them more energy efficient.The scale of the project, part funded by the European Regional Development Fund (ERDF), has made it one of the UK’s biggest home retrofit schemes.NIBE products used:NIBE F2040 Air Source Heat PumpKey stats:112 NIBE F2040 Air Source Heat Pumps installedContributes to project to remove 370 tonnes per annum of CO2 in ArrowfieldInstalled by Rothwell Plumbing GroupPart of a project to retrofit 199 homes with air source heat pumpsThe solution to the projectArrowfield Low Carbon Living is a flagship scheme in Manchester, retrofitting 199 homes and 197 apartments with air source heat pumps. NIBE was chosen as one of two heat pump providers to bring low carbon, sustainable heating to residents living in the Arrowfield estate. NIBE’s high quality, reliable heat pump systems provide optimum savings and automatically adapt to each home’s output requirements.Rothwell Plumbing Group (RPS) was chosen as the installation partner for the project, with a proven track record for delivering high quality heat pump systems, in both the public and private sectors. RPS are also MCS & Trustmark accredited, with the experience and technical ability to install NIBE systems to the highest of standards.Southway’s aim is for the project to act as a learning process and blueprint for how it can scale up the retrofitting of its entire housing stock over the next 15 years.Ahead of this ambitious project, a community engagement programme enabled greater awareness of heat pumps as a low carbon heating solution, whilst providing the opportunity to listen and respond to resident feedback.The Arrowfield Hub, located in in a repurposed empty house on the estate, became a venue for regular engagement between the residents and the project team, creating an open forum for questions and comments on the proposed scheme.The Hub was also heated by an air source heat pump, allowing residents to witness a live heat pump in operation and experience the warmth of the building.Residents were also able to express their concerns surrounding the project, and these could be addressed accordingly. This regular and open engagement was key to keeping residents informed and more familiar with their soon-to-be new heating systems.The Hub also allowed for the project team to dispel common myths and misconceptions about air source heat pumps and reassure residents that their homes would remain warm throughout the yearThe Results112 NIBE’s F2040 Air Source Heat Pumps have been providing heat and hot water to residents across the estate, adapting to the requirements of each and every home in the estate, whilst providing powerful output even down to outdoor temperatures as low as -20°C.The systems will provide homes across the estate with optimised energy and cost savings, whilst supplying a supply line temperature of up to 58°C regardless of outdoor temperatures.TestimonialMatt Roberts, Strategic Director of Property and Development at Southway Housing, said:"Community engagement for the Arrowfield Low Carbon Living Project was central to the project's aims. Foregrounding the needs of Arrowfield's residents as central to the project’s implementation, helped us to better convey the benefits of low carbon heating and address concerns and suggestions brought forward by homes set to benefit from the retrofit scheme.Air source heat pumps are essential to Southway Housing Trust decarbonising our housing stock and achieving our net-zero goals. Working in partnership with NIBE is part of that process and has contributed to achieving carbon savings of 370 tonnes CO2 per annum on Arrowfield.”About the installerRothwell Plumbing Services Group Ltd, formed in 1997, are a family run business specialising in delivering renewable solutions across the North of England. The company helped to ensure residents in Arrowfield Estate could access maximum energy savings and reduced energy bills.

Kelly is a lifestyle writer whose popular blog, My Norfolk Home, covers home decor ideas & renovation inspiration. Kelly selected a Dimplex Grand Noir Opti-MystTM fire. The Grand Noir, is a beautiful electric stove, combining the classic feeling of a wood burning stove with modern electric functionality.

The North Devon Enterprise Centre in county Devon was constructed using sustainable materials and techniques.DUCO also played a role in this with its intensive ventilation techniques.Main contractor ISG has constructed the Enterprise Centre at Devon County Council’s Roundswell Enterpise Park development. The centre has been designed to offer flexible office accommodation for small and medium size businesses that are looking to grow. The building was constructed using sustainable materials and techniques.DUCO also played a role in this with its intensive ventilation techniques.Environmentally sustainable buildingThe Enterprise Centre, which is known as NODE, has still a few office facilities for sale, but most of the facilities were sold already by companies both local and from the county.The design and construction of the building was developed with environmental sustainability in mind, resulting in the achievement of the BREEAM (Building Research Establishment Environmental Assessment Method) Excellent Status.Intensive ventilation for a healthy indoor climateDUCO is proud to be part of this achievement through the installation of its high-end intensive ventilation products in the Enterprise Centre’s building. One thing’s for sure: no compromises were made on ventilation in this project.No fewer than three high-performance DUCO ventilation products can be found in the building. Combined, they provide sufficient intensive ventilation in the entire building.DucoGrille Solid F 30Z window grilles are made of punched solid louvre blades which are very robust and equipped with an insect screen. A reinforced version of this frame profile can acheive burglar-resistance to Class 2.DucoGrille Solid G 30Z is a recesses mounted wall louvre, manufactured from extruded aluminium profiles. The perforated blade profiles act as an insect screen, whereas the Z-shaped blade ensures a robust design.DucoGrille Close 105 blade dampers were installed and fitted with the DucoGrille Solid window grilles. Thanks to the high airflow rate the DucoGrille Close 105 damper is also suitable for adjustable extract. It allows fresh air from the outside enter the Enterprise Centre building through the building envelope ensuring a healthy indoor climate!

A chapel in North Yorkshire has been renovated and converted into a home where two Aerona³ R32 air source heat pumps have been installed to provide the heating and hot water. With the space outside of the property limited, Grant’s compact and slim heat pumps were the perfect solution.

Overview A collaborative project with our long-lasting customers Jet Environmental Systems resulted in the successful installation of three HEM-SLx 525kW heat exchange modules, aimed at providing warehouse heating for a prominent automotive component warehouse in Ellesmere Port. The project involved a bespoke-designed air handling unit (AHU) expertly manufactured by Linton Services Ltd and delivered as a comprehensive turnkey heating solutionBackgroundThe warehouse had a substantial floor area of 39,000m2 and a volume of 760,000m3. The main requirement was to maintain an internal temperature of 16C degrees, even during outdoor temperatures as low as -4C degrees. To ensure efficient heating and uniform distribution throughout the space, a HEM-SL heating solution with a capacity of 525kW and an airflow of 37.5m3/s was needed. The client preferred natural gas as the heating fuel, which Jet Environmental incorporated into their custom-designed air handling unit (AHU) manufactured by Linton Services Ltd in Presteigne.SolutionThe warehouse layout and heating load necessitated the use of three air-handling units. To ensure a reliable and robust heating system, Jet Environmental selected Powrmatic as the heating supplier. Jet Environmental, Linton Services, and Powrmatic have a longstanding relationship and extensive knowledge of each other’s businesses. This familiarity ensures seamless integration of their products and expertise.Each custom-designed HEM unit was manufactured in the UK at Powrmatic’s manufacturing in Ilminster, Somerset. By choosing British-built products, customers can have confidence in the reliability, durability, and adherence to strict industry standards. Each HEMx unit is custom made with a wide range of kW and size configurations and has been adapted to suit the needs of the OEM and AHU industry by the provision of its slot-in casing arrangement.ResultThe collaborative efforts of Jet Environmental Systems, Linton Services, and Powrmatic resulted in the successful implementation of an efficient heating solution for the automotive component warehouse. The customized AHUs, designed by Jet Environmental and manufactured by Linton Services, effectively delivered the required heating capacity to maintain a consistent internal temperature of 16C degrees. Powrmatic’s reliable heating equipment ensured optimal performance and met the client’s expectations.The client was impressed with the comprehensive turnkey solution provided by Jet Environmental Systems. They were particularly satisfied with the partnership between Jet Environmental, Linton Services, and Powrmatic, which demonstrated a deep understanding of their businesses and the ability to deliver a reliable and efficient heating system.Overall, the successful completion of this project showcases the expertise that Powrmatic has in providing effective warehouse heating solutions for industrial applications.

Zoo Animal Enclosure Heating SolutionIn partnership with HEVAC Services Ltd of Kings Langley, Powrmatic was approached to develop a heating solution for the White Rhino’s House at Whipsnade Zoo, which saw the installation of an overhead gas-fired (LPG) continuous radiant heating system, as the previous electric heating system inside their indoor habitat was not efficient enough and heat was escaping through the timber structureProject BackgroundThe White Rhino house at Whipsnade Zoo is the home to a herd (also known as a “crash”) of seven southern white rhinos, Sizzle being the only male – the six females are; Mikumi, Bertha, Tuli, Jaseera, Fahari, and Nandi. Sizzle and Tuli are the parents of the latest baby rhino Nandi born in August 2021.The heating inside their indoor habitat at Whipsnade was not efficient enough. Localised electric heaters were spread around the large space to create coverage, but the heat was escaping through the timber structure. It was decided to upgrade the structure by foam insulation to the internals of the asbestos roof and to provide a new continuous gas-fired overhead radiant heating system providing blanket heat coverage to the complete floor area of the house.  Project SolutionHEVAC Services Ltd of Kings Langley, Hertfordshire, who undertake servicing of HVAC equipment at Whipsnade Zoo on behalf of Pareto FM for the end client ZSL (Zoological Society of London), approached Powrmatic to develop a heating solution for the rhino’s house. The brief was to provide an overhead gas-fired (LPG) radiant heating system to blanket cover the complete floor area of the rhino house, but also design it so that it could be zone controlled, should one of the herd have a need to be in an area of a higher or lower temperature.The LPG propane tanks for the heating system needed to be sunk into the earth at the edge of the rhino house to avoid having to remove any trees, thus maintaining the conservation ethos of ZSL. For a structure such as the rhino house, being the size of a large sports hall, a Powrmatic SRP-PCV+ continuous gas-fired radiant tube system comprising; 4 x 73kW burners was the proposed solution, arranged in 4 temperature zones, with the new MC400/C controller and just the one flue discharge to atmosphere.Project ResultThe installation of the new PCV+ continuous overhead radiant heating system was skilfully undertaken by HEVAC Services Ltd, with the contract programme being driven by the daily habits of the rhino herd! Whether they wanted to be in their house or out on the field. Thus, the logistics of undertaking the heating installation were unique compared to working in a standard commercial/industrial environment.The White Rhinos now have a refurbished home and a heating system that delivers radiant heat in exactly the same way that we (and the rhinos) receive energy in the form of heat from the sun. Radiant heating systems efficiently radiate infrared radiation, which is the transfer of energy in waveform from a hot surface to a relatively cooler surface without heating the medium between. Thus, the rhinos can bask under the radiant heat, whether indoors or outside under the sun.The ZSL Whipsnade Zoo White Rhino Enclosure now benefits from a highly energy-efficient Powrmatic SRP-PCV+ system, listed on the Carbon Trust Energy Technology List (ETL), endorsing the Seasonal Space Heating Energy Efficiency of; 92.1%, and thus delivering low; energy usage, fuel bills and carbon emissions minimising their impact on the environment.

There are a total of 30 active SmokeStop smoke curtain barriers, 5 vertical FireMaster fire curtains and 2 FireMaster Concertina multi-faceted fire curtains installed within the university building offering protection from fire and smoke. With a large central atrium in the centre of the building, smoke control was a huge necessity on this project and therefore various bespoke engineered solutions were required to help solve the smoke and fire requirements.

Hatfield Place, a luxury country house wedding venue, chose Junckers solid wood flooring fitted with Leveldek underfloor heating system for its newly developed building. The new foyer, ceremony hall and wedding breakfast room overlook the original walled garden, with views of the beautiful parkland to the rear. The redeveloped building is bright and airy with large feature windows and high ceilings. In the foyer, a spacious room with seating for up to 300 guests, Junckers 22mm Oak Variation flooring provides a warm and lively backdrop, adding character with its subtle colour variations and natural grain patterns. In contrast, the ceremony hall and wedding breakfast room were fitted with Junckers’ Oak Harmony plank flooring, a wide board floorboard which gives a more uniform impression required for the formal spaces. Both floor types were pre-finished in Junckers’ popular Ultramatt lacquer, a strong and durable finish with no surface sheen. Delivered pre-finished, the floors are ready to walk on as soon as they have been installed and will withstand years of dancing and dining with the correct maintenance. The floors in all three rooms were installed over Leveldek, Junckers’ fully integrated underfloor heating and levelling system. Working in partnership with Jupiter Heating Systems, the Leveldek system was developed to simplify the specification process to offer a versatile levelling system, underfloor heating and solid hardwood floor from a single point of supply. Underfloor heating is the most efficient way of heating a large, open area. Specifying Leveldek offered Hatfield Place an all-in-one solution whereas traditionally, installation of the heating system, levelling system and the floor itself would have to be separately sourced. The system is efficient and cost effective to run, ideal for use in a large space. For energy efficiency and fast acting warm-up time, the heating pipes are installed directly beneath the floorboards and the panels are insulated and reinforced for outstanding heat output. The system can be used on an uneven substrate as varying heights can be achieved with the stacking cradles. For more than 30 years, Junckers’ wooden floors have been recognised as the only type of solid hardwood flooring on the market stable enough to be guaranteed for use over underfloor heating. Junckers offers a full guarantee for the system, which is recommended for residential and commercial buildings as well as sports and dance. The flooring contractor was PICA Floorings. 

Project BackgroundThe Harrow Club in London W10 has been creating positive futures for marginalised young people in West London since it was formed in 1883 as The Harrow Mission Church. Through general youth clubs and specialist interventions, they aim to empower young people to complete their education, avoid anti-social behaviour and become positive contributors to society. They work with up to 500 young people each week across 6 clubs, helping them to recognise their full potential.The Harrow Club with high ceilings, period windows, and exposed beams has a large sports hall which is a preserved reminder of the Club’s heritage, plus a smaller dance studio, both of which were heated by an old continuous gas-fired radiant tube system that had ‘life-expired’.Project SolutionBuilding Services Engineering Consultants, SS and A of Great Portland Street were commissioned by the Harrow Club to explore options for the replacement of the old radiant heating system. They called on the expertise of Powrmatic to review possibilities and offer a solution.The installation of the new systems was expertly undertaken by Industrial Commercial Environments Ltd of East Sussex. Radiant heating is the most suitable form of heat for both sports halls and dance studios as the lower air temperature for the same comfort level is approx. 5ºC lower than with a warm air system, thus producing a beneficial environment for the activities. A new Powrmatic SRP-PCV+ continuous gas-fired radiant tube system was the proposed solution. This enabled the installation to follow the route of the existing thus minimising costs and disruption during the works.Project ResultThe new Powrmatic SRP-PCV+ continuous radiant heating systems in the two halls have provided the Harrow Club with energy-efficient heating for the next two to three decades. These systems deliver the comfortable environment crucial for the well-being of the young people that the club nurtures in their quest to improve their futures.The Harrow Club now benefits from the energy-efficient Powrmatic SRP-PCV+ systems, listed on the Carbon Trust Energy Technology List (ETL), reducing their fuel bills, carbon emissions and thus their impact on the environment.

OverviewPowrmatic was selected to supply a frost protection warehouse heating solution for a massive 81,000m² building at Plot 2 at the Midland Logistic Park installed by Phase Mechanical Projects. a combination of 7 TE61 heating units and TE61 Destratifcation units were installed.Project BackgroundThe 81,000m² industrial logistic warehouse required frost protection with design parameters of -5°c external and +5°c internal.SolutionOne of our largest installations to date, 4 x TEG61 air rotation heaters were installed by our trusted partners Phase Mechanical Projects. Each TEG61 heaters boasts an impressive 525kW of heat output and were installed alongside 3 x TE61 destratification units to assist with the air turnover due to the size of the building. The 4 TEG61 heater units selected were designed to move 39m3/s of air around the building per unit, and when combined with 3 TE61 destratification units also at 39m3/s this gave a total air volume of 270m3/s which achieved the required 0.8 air movements per hour from the end client.ResultThe newly styled Powrmatic Air rotation units in our new RAL 7015 colour were installed expertly by Phase Mechanical Projects. The racked logistic warehouse will now benefit from a frost protection system which will protect the internal sprinkler system from freezing in the colder months. Each T.E manufactured at Powrmatic is custom built to specific project requirements.

In the heart of the vibrant student city of Sheffield lies The Gate, a modern student accommodation scheme that houses 455 students. The imposing building is situated along the busy main road bordering Sheffield Hallam University and is equipped with numerous facilities including a gym, rooftop terrace, and a cinema… The complex is truly a diamond among student residences. The installed DucoMax sound attenuating window ventilator makes a major contribution to the healthy indoor climate of the building.About The GateIn the heart of the bustling student city of Sheffield, surrounded by a number of busy roads and right next to Sheffield Hallam University, is the brand-new student accommodation - The Gate.   Numerous facilities contribute to a pleasant living environment for the 455 students who live there, including a gym, a spacious rooftop terrace with breathtaking views, a cinema room, communal kitchens and study areas.A Healthy Indoor ClimateAt The Gate, attention is not only paid to different accommodation levels for the students, but also their long term wellbeing and as part of this a healthy indoor climate is also highly valued. On average we spend 90% of our time indoors. Good ventilation ensures a healthy home and prevents health problems such as dry eyes and throat, headaches while studying, loss of concentration and stress among the students. In addition, good ventilation has been shown to improve learning performance by up to 23%. The Gate opts for a natural ventilation system in which fresh air is supplied through the facade. The DucoMax acoustic window vent not only ensures a plentiful supply of fresh outside air, but also reduces any outside noise from the city below to a maximum (up to 53 dB).Reducing noise nuisanceThe ventilation system supplies fresh air via the DucoMax acoustic window vent in the living and sleeping areas, while in humid rooms polluted air is removed. The central location of The Gate provides easy access to the vibrant city of Sheffield, but unfortunately this can cause a lot of noise nuisance too due to the busy traffic. The DucoMax was developed specifically for buildings with high levels of noise disturbance, to keep the noise out. The integral self-regulating valve also keeps the air flow constant during differing wind pressures. As a result, students are hindered as little as possible by these external factors. The combination of the various facilities with a healthy indoor climate contributes to an optimal learning and living environment for the students.

Powrmatic was selected to supply a large distribution centre with an energy-saving air rotation heating system for ILG's 46,800m³ distribution facility in Gatwick working in partnership with Air Ability who supplied and installed just a single Powrmatic TEx41 air rotation heater.

Our Market Leading SSH Acoustic trickle ventilators were specified for this mix of High rise and town houses for a Major regeneration project for Galliard Homes in Birmingham.The site is located on a major road pathway into the city so having a high performing acoustic ventilator was key in the designOur SSH 5000Ea with an external acoustic model was supplied and provided 42Dnew sound reduction "in the Open Position" These powder coated acoustic trickle ventilators were located in the head of the window frames as they have a height of 40mm and only require an 11mm slot height this avoiding large window head profiles

OverviewIn partnership with Tidyco, Powrmatic was selected to supply an energy-efficient air rotation heating system for a 5,100m2 warehouse storage facility in Derbyshire using a Powrmatic TEx41 Air Rotation Heater measuring over 20ft tall.Project BackgroundTidyco was approached by a customer who is involved with manufacturing, transport and additional services in the aerospace industry amongst others. After recent success, their customer needed to expand their footprint and managed this by moving into a newly built warehouse situated in Derbyshire.SolutionAs this was a brand-new commercial building, there was no heating provision and just the original lighting installed by the builder, which was not fit for purpose. Tidyco was tasked with installing an efficient and effective means of heating solution for the 5,100m2 (55,000 sq ft) vast space along with a modern lighting system. In order to heat and illuminate this space, which occupied a space of more than seven and a half football pitches, some heavy-duty kit was required.ResultFor the heating aspect, Tidyco engineers installed an internal Powrmatic TEx 41 air rotation heater, manufactured in the UK. With an output of 350 kW, the unit measured in at over six metres (20 ft) tall. This particular TEx model was gas-powered and has the superior capacity to provide complete climate control for a 55,000 sq ft with a single TEx Air Rotation Heater.