NBS Source
I'm a manufacturer

"smoke and heat control systems"

6,921 results found

Sort by:

Showing 37-72 of 1361

Sponsored
The Gherkin, London. Smoke Curtains

The Gherkin, London. Smoke Curtains

Coopers Fire Ltd

Coopers solution was to install over 100 SmokeStop smoke curtain barriers. Concealed within the ceiling voids of each of the 39 floors, the SmokeStop smoke curtain barriers were developed to deploy in the event of fire, channelling smoke away from occupant and out of the building. This effective strategy for containing and channelling smoke would ensure that Gherkin’s 41 floors were protected from filling with smoke and provide occupants with a safe means of escape.
Sponsored
From one renewable heating system to another

From one renewable heating system to another

Grant Engineering (UK) Ltd

A Grant Aerona³ air source heat pump has been installed at a home in Wiltshire, replacing the biomass boiler that was previously heating the property. Working together with an underfloor heating system, the Aerona³ heat pump is operating efficiently to deliver warmth and comfort throughout the home.
Sponsored
DAB Pumps Circulation Pumps Used for Stadium Heating and Under Pitch Heating System - San Siro - Milan

DAB Pumps Circulation Pumps Used for Stadium Heating and Under Pitch Heating System - San Siro - Milan

DAB Pumps Ltd

The San Siro playing field was designed to be heated using an under-soil system featuring single-head, in-line electronic pumps. In the wider facility areas, a heating substation was installed, incorporating wet-rotor circulators and in-line electronic pumps for the climate conditioning systems. Additionally, co-generation systems with both single-head and twin-head in-line electronic pumps were implemented for auxiliary plants dedicated to heating energy production.Despite the initial investment in inverter technology for the pumps, the operational optimization results in a lower running cost, showcasing a great example of an energy efficient installation.
Sponsored
Adidas Superstore, Paris - Smoke Curtain Barrier

Adidas Superstore, Paris - Smoke Curtain Barrier

Coopers Fire Ltd

Coopers were commissioned to design and manufacture a bespoke curtain barrier system that, in the event of fire, would guard against smoke penetrating the upper floors of the store. Through regional partner Souchie, Coopers installed a series of Smoke Stop™ vertical smoke curtains above each escalator specifically designed to protect the means of escape for customers, whilst at the same time dramatically reduce the transmission throughout the building of life threatening gases generated by fire.
Sponsored
SIEGENIA launch smart access control systems

SIEGENIA launch smart access control systems

Siegenia-Aubi Ltd

The two access control systems from SIEGENIA for house and apartment entrance doors leave no desires unfulfilled: the keypad and the fingerprint scanner combine elegant design with maximum ease of use and efficient access management for the building. They are therefore an ideal solution for the increasing demand for smart home applications in private housing construction. The two systems are equipped with a comprehensive access log, simple, clear user administration as well as a rechargeable battery-buffered timer. The emphasis is on ease of use – e.g. with a simple touch of the finger on the fingerprint scanner or the standardised equipment with integrated WIFI and Bluetooth technology. This enables both the use of the smartphone as remote control as well as convenient control and administration with the aid of the SIEGENIA Comfort app. 
Sponsored
Aviation Hangar Heating - Boscombe Down

Aviation Hangar Heating - Boscombe Down

Powrmatic Ltd

OverviewA successful installation of 40 x Powrmatic SRP U Tubes at a hangar facility in Boscombe. With the system design by Powrmatic, ABS, a leading HVAC and installation company, was entrusted with this significant installation project. The installation aimed to provide efficient heating performance, reduce energy costs, and improve the overall comfort and functionality of the hangar.Project BackgroundThe Weighbridge Hangar Building 499 at MOD Boscombe Down operated by QinetiQ required a new heating system due to the life-expired existing system. The hangar required a powerful heating system that would operate efficiently during the cold winter months while reducing energy costs. A new Powrmatic SRP U-tube herringbone radiant heating system was produced in line with the design intent of WYG on their tender documents. J & B Hopkins secured the M & E contract and employed the services of ABS Ltd to undertake the installation of the radiant heating system. ABS Ltd, formed in 1978, offers a full range of professional services including the installation and maintenance of both radiant and warm air heating systems to both commercial and industrial properties throughout the UK.SolutionThe MOD hangar facility, situated on an exposed location, at Boscombe Down required a robust heating solution to withstand the cold winter months. 40 Powrmatic SRP radiant U Tube PVU50 Hi/Low heaters each rated at 50kW on a herringbone system layout with ducted fresh air onto each burner to comply with fire safety standards were installed by ABS Ltd. To maximize efficiency, the heaters mounted at an impressive height of 23 meters in line with Powrmatic’s design drawings were arranged in 8 lines of 5, with 3 heaters connected to one fan and 2 heaters connected to another fan. The heating system incorporated Powrmatic MC200 controllers and black bulb sensors for precise temperature control across the hangar.ResultThe final stage of the installation was completed by J & B Hopkins, arranging for the necessary gas and electrical distribution services to the radiant heaters and discharge fans. The 40 Powrmatic SRP radiant U Tubes installed by ABS Ltd effectively heated the facility, providing a comfortable and conducive environment for the workforce during the winter season. Additionally, the new heating system reduced energy costs and eliminated the need for multiple exhausts on the rooftop hence retaining the aesthetic design principles of the hangar. The commissioning was successfully carried out when all services were completed, providing a satisfied client with a capable heating installation within the hangar, for the exposed site location.
Sponsored
The Moonstone Project - Eco-Friendly Heating in the Cotswolds

The Moonstone Project - Eco-Friendly Heating in the Cotswolds

Schlüter-Systems Ltd

The revolutionary, award-winning underfloor heating system Schlüter-BEKOTEC-THERM was the natural choice for one of the UK’s greenest self-build projects.
Sponsored
Places for People update their heating with the Quantum High Heat Retention Storage Heater

Places for People update their heating with the Quantum High Heat Retention Storage Heater

Glen Dimplex Heating and Ventilation

With outdated electric storage heating in all 72 flats, Places for People knew that heating system upgrades would reduce bills and improve comfort for residents. TMS Electrical Contractors Ltd, based in Rudgwick, Horsham, was instructed to specify the most suitable replacement – and Dimplex Quantum was the obvious choice.
Sponsored
NIBE Ground Source Heat Pump Installation for a livestock auctioneering house

NIBE Ground Source Heat Pump Installation for a livestock auctioneering house

NIBE Energy Systems Ltd

Hexham and Northern Mart is an auction house in Hexham (25 miles west of Newcastle), specialising in the sale of livestock and cattle to farmers across the North East of England. The business decided it was time to replace its old gas-fired heating system with a more sustainable alternative – one that would not only reduce energy consumption and running costs, but also earn additional income through the Renewable Heat Incentive (RHI). Minimising impact on day-to-day operations during the transition was another key consideration. Managing director Robert Addison tasked renewable energy specialist and NIBE Pro Installer Calibrate Energy Engineering with finding the right solution to meet the heating and hot water demands of the 112,050sq ft building.The SolutionThe team at Calibrate specified, designed and installed a 300 kW renewable heating system made up of five 60 kW NIBE F1345 ground source heat pump (GSHP) units. They paired this with a 50 kW solar PV array, fitted to the roof of the main pen area, which partially powers the NIBE GSHP system. The in-ground heat collectors required for the GSHP were laid in the fields around the buildings, with the controls units sited in a prefabricated plant room to the rear of the premises. The installation took just three months from start to finish, and during this time it was business as usual for Hexham and Northern Marts.ResultsDocked together in a cascade for greater output capacity, the five NIBE F1345 GSHP units now meet 95% of Hexham and Northern Marts’ 394,000 kW/h annual heating and hot water demand. Meanwhile, the 50 kW solar PV array generates enough free electricity to offset a significant 50% of the power needed to run the GSHP system. Hexham & Northern Marts is set to make a 236% return on investment – reaping an estimated £862,000 in energy savings and commercial RHI payments over the next two decades.Customer Testimonial“We couldn’t be happier with our new renewable heat and power sources. As well as delivering instant reductions in energy usage and subsequent savings on heating bills, the NIBE GSHP solution is providing us with a steady stream of income for the next two decades, thanks to the RHI. The power produced by the solar PV panels is an added bonus, and makes running the heat pump system even more cost-effective.“As a result, we’re expecting to see returns of more than double our original investment over the next 20 years – which is absolutely invaluable from a business point of view. Not only this, but we’ve got an efficient, reliable renewables setup that’s fit for the future, and will continue to deliver ongoing savings for years to come.”Robert Addison, managing director, Hexham & Northern Marts
Sponsored
White Rhino House Heating - Whipsnade Zoo

White Rhino House Heating - Whipsnade Zoo

Powrmatic Ltd

Zoo Animal Enclosure Heating SolutionIn partnership with HEVAC Services Ltd of Kings Langley, Powrmatic was approached to develop a heating solution for the White Rhino’s House at Whipsnade Zoo, which saw the installation of an overhead gas-fired (LPG) continuous radiant heating system, as the previous electric heating system inside their indoor habitat was not efficient enough and heat was escaping through the timber structureProject BackgroundThe White Rhino house at Whipsnade Zoo is the home to a herd (also known as a “crash”) of seven southern white rhinos, Sizzle being the only male – the six females are; Mikumi, Bertha, Tuli, Jaseera, Fahari, and Nandi. Sizzle and Tuli are the parents of the latest baby rhino Nandi born in August 2021.The heating inside their indoor habitat at Whipsnade was not efficient enough. Localised electric heaters were spread around the large space to create coverage, but the heat was escaping through the timber structure. It was decided to upgrade the structure by foam insulation to the internals of the asbestos roof and to provide a new continuous gas-fired overhead radiant heating system providing blanket heat coverage to the complete floor area of the house.  Project SolutionHEVAC Services Ltd of Kings Langley, Hertfordshire, who undertake servicing of HVAC equipment at Whipsnade Zoo on behalf of Pareto FM for the end client ZSL (Zoological Society of London), approached Powrmatic to develop a heating solution for the rhino’s house. The brief was to provide an overhead gas-fired (LPG) radiant heating system to blanket cover the complete floor area of the rhino house, but also design it so that it could be zone controlled, should one of the herd have a need to be in an area of a higher or lower temperature.The LPG propane tanks for the heating system needed to be sunk into the earth at the edge of the rhino house to avoid having to remove any trees, thus maintaining the conservation ethos of ZSL. For a structure such as the rhino house, being the size of a large sports hall, a Powrmatic SRP-PCV+ continuous gas-fired radiant tube system comprising; 4 x 73kW burners was the proposed solution, arranged in 4 temperature zones, with the new MC400/C controller and just the one flue discharge to atmosphere.Project ResultThe installation of the new PCV+ continuous overhead radiant heating system was skilfully undertaken by HEVAC Services Ltd, with the contract programme being driven by the daily habits of the rhino herd! Whether they wanted to be in their house or out on the field. Thus, the logistics of undertaking the heating installation were unique compared to working in a standard commercial/industrial environment.The White Rhinos now have a refurbished home and a heating system that delivers radiant heat in exactly the same way that we (and the rhinos) receive energy in the form of heat from the sun. Radiant heating systems efficiently radiate infrared radiation, which is the transfer of energy in waveform from a hot surface to a relatively cooler surface without heating the medium between. Thus, the rhinos can bask under the radiant heat, whether indoors or outside under the sun.The ZSL Whipsnade Zoo White Rhino Enclosure now benefits from a highly energy-efficient Powrmatic SRP-PCV+ system, listed on the Carbon Trust Energy Technology List (ETL), endorsing the Seasonal Space Heating Energy Efficiency of; 92.1%, and thus delivering low; energy usage, fuel bills and carbon emissions minimising their impact on the environment.
Sponsored
Lampwick Quay, Manchester

Lampwick Quay, Manchester

Senior Architectural Systems Ltd

Developer Manchester Life is transforming the residential market in the city of Manchester and Senior Architectural Systems is proud to have partnered with them to create a number of apartment schemes including Cotton Field Wharf, Weavers Quay and New Little Mill. Lampwick Quay is the fourth and most recent project to have been undertaken by Senior as part of this successful repeat business relationship.Located in Manchester’s thriving new community in Ancoats, the new Lampwick Quay development comprises 213 apartments across three blocks of five, six and ten-storeys, with ground floor retail units and communal facilities including a gym and residents club room. A mix of Senior’s aluminium windows, commercial doors and curtain wall solutions have been used extensively throughout the development and installed by supply chain partner Aire Valley Architectural Aluminium for main contractor John Sisk & Son Ltd.To help reduce heat loss and energy costs, Senior’s low U value and Part L compliant PURe® aluminium casement windows have been installed to each of the apartments to create a comfortable living space. The stylish window system also provides the perfect frame for the development’s views of Manchester’s New Islington Marina.Energy-efficiency has also been addressed in the communal, retail and ground floor areas through the use of Senior’s thermally-enhanced SF52 aluminium curtain wall system which maximises the controlled use of use of natural light.To meet the scheme’s stringent safety and security requirements, Senior’s robust SPW501 aluminium commercial doors were installed to the main entrance and exit points. The SPW501 commercial door system is ideally suited to high pedestrian use and meets the requirements of Secured By Design. Key elements of the fenestration package have also been designed to work as part of the scheme’s overall passive fire protection strategy, with the use of Senior’s SPW600 automatic opening ventilation (AOV) aluminium windows in the communal areas and stairwells. Although visually similar to Senior’s popular SPW600 system, these AOV windows are fitted with a smart actuator which allows for quick and automatic ventilation in the event of a fire, helping to remove smoke from the air.The development’s low pitch sawtooth roof design pays homage the area’s industrial heritage, with the slim aluminium frames of the fenestration package further complementing the main façade of zinc cladding, brick and coloured panels. Initially designed by CallisonRTKL, the Lampwick Quay development was delivered by jmarchitects.
Sponsored
Ability Project factory extension

Ability Project factory extension

Glen Dimplex Heating and Ventilation

Working closely with Dimplex’s in-house heating design team, Ability Projects developed a unique centralised control solution, incorporating Dimplex air source heat pump and solar PV technology.
Sponsored
Mall of the South

Mall of the South

SE Controls

Atria natural smoke ventilation in accordance with EN12101-2 for a retail premises.
Sponsored
Grant Uflex underfloor heating system installed in barn conversion

Grant Uflex underfloor heating system installed in barn conversion

Grant Engineering (UK) Ltd

A Uflex underfloor heating system consisting of fifteen zones has been installed as part of a barn conversion project in Thirsk, North Yorkshire. Here, we talk to Oliver Carter Plumbing and Heating, the G1 installer who completed the installation, to discover how they found working with the new Uflex underfloor heating range from Grant.
Sponsored
Renewable heating system helps family reduce their energy costs

Renewable heating system helps family reduce their energy costs

Grant Engineering (UK) Ltd

A family home in Wiltshire has made the move from a gas central heating system to a renewable solution featuring an Aerona³ air source heat pump, a solar thermal system and QR hot water cylinder all supplied by Grant UK, helping the household to reduce their dependency on fossil fuel and lower their energy bills.
Sponsored
Air Rotation Warehouse Heating - Derbyshire

Air Rotation Warehouse Heating - Derbyshire

Powrmatic Ltd

OverviewIn partnership with Tidyco, Powrmatic was selected to supply an energy-efficient air rotation heating system for a 5,100m2 warehouse storage facility in Derbyshire using a Powrmatic TEx41 Air Rotation Heater measuring over 20ft tall.Project BackgroundTidyco was approached by a customer who is involved with manufacturing, transport and additional services in the aerospace industry amongst others. After recent success, their customer needed to expand their footprint and managed this by moving into a newly built warehouse situated in Derbyshire.SolutionAs this was a brand-new commercial building, there was no heating provision and just the original lighting installed by the builder, which was not fit for purpose. Tidyco was tasked with installing an efficient and effective means of heating solution for the 5,100m2 (55,000 sq ft) vast space along with a modern lighting system. In order to heat and illuminate this space, which occupied a space of more than seven and a half football pitches, some heavy-duty kit was required.ResultFor the heating aspect, Tidyco engineers installed an internal Powrmatic TEx 41 air rotation heater, manufactured in the UK. With an output of 350 kW, the unit measured in at over six metres (20 ft) tall. This particular TEx model was gas-powered and has the superior capacity to provide complete climate control for a 55,000 sq ft with a single TEx Air Rotation Heater.
Sponsored
Hybrid heating system provides constant comfort at cost-saving lower temperature

Hybrid heating system provides constant comfort at cost-saving lower temperature

Daikin Ltd

Hull homeowner Ben Andrew is watching his home energy bills carefully to measure the benefits of switching from an all-gas heating and hot water system to a combination of gas boiler and air source heat pump.
Sponsored
B2P Canary Wharf Office - Smoke & Natural Ventilation

B2P Canary Wharf Office - Smoke & Natural Ventilation

Powrmatic Ltd

OverviewThe BP2 office building was constructed on reclaimed land at the eastern gateway to the Canary Wharf estate and comprises 14 stories above ground, plus three basement levels. The building’s design places a strong emphasis on energy-efficient performance, so this was an important criterion in the selection of ventilators.OverviewThe BP2 office building was constructed on reclaimed land at the eastern gateway to the Canary Wharf estate and comprises 14 stories above ground, plus three basement levels. The building’s design places strong emphasis on energy efficient performance, so this was an important criterion in the selection of ventilators.Project BackgroundAir Design Systems Ltd provided a full design and build package for the client. This included installation of local control panels and electrical wiring, as well as micro-switches to allow a positive signal that each ventilator is fully open prior to the pressurisation system starting up. Air Design Systems Ltd also supplied and installed numerous continuous louvres to the plant wells that rise through the building and terminate at roof level.Project SolutionPowrmatic supplied a large office building ventilation solution with a combination of single and double flap Skyvent ventilators to provide natural and smoke ventilation at the BP2 building in Canary Wharf, East London. Each of the 13 BS-EN 12101 ventilators was installed by Air Design Systems Ltdonto existing upstands with insulated lids and bodies and polyester powdered coated to RAL 9007 matt.Project ResultSkyvent ventilators are designed for both smoke and natural ventilation and are available in single and twin flap versions to suit the needs of each project. They can be installed on upstands, roof sheeting and into glazing systems. They feature very low air leakage when closed, and are weatherproof when closed, as tested to BS Parts 1 & 2. Insulated options can achieve U-values as low as 0.17W/m2/K.Skyvent ventilators are available with optional aluminium (single skin and insulated), polycarbonate or glazed lids in polyester powder paint finishes to any standard BS or RAL colour. A full range of accessories is available including bird guards, security guards and insect mesh.
Sponsored
Waterproofing an Air Traffic Control Tower, Scotland

Waterproofing an Air Traffic Control Tower, Scotland

Newton Waterproofing Systems

Heavy rainfall on the Orkney Islands meant that the basement room of Kirkwall Air Traffic Control Tower suffered from frequent flooding, with water levels reaching 1.2m at their highest point. Newton Waterproofing and Specialist Contractor Wise Basement Systems were called in to remove the existing water and then waterproof the structure to protect it from future flooding, all in just one week.Kirkwall airport is located on the main island of the Orkneys, 10-miles off the North coast of Scotland. Presented with a logistically challenging location and a tight project timescale of just 1 week, Newton had no hesitation in recommending the expertise of Wise Basement Systems as the specialist contractor to Building Surveyor Pick Everard.Getting involved at the very start of the project, Wise were immediately able to design, advise on and install a system to remedy the 2 inches of water in the existing basement of the Air Traffic Control tower.Cavity Drain Waterproofing, or ‘Type C’ waterproofing as it is defined by BS 8102:2009 is often the most effective means of achieving a completely dry ‘Grade 3’ environment in an existing structure below ground. It was therefore no surprise that Wise Basement Systems designed a Newton CDM System for this existing basement area.To begin, Wise installed 120m2 of Newton 508 on the walls and 80m2 of the recycled Newton 520 eco to the floor, above the closed-cell Fibran XPS 500-C insulation. The drainage membranes were supplemented with a perimeter channel of Newton Basedrain, directed to a Titan-Pro sump chamber containing two NP400 Pumps to remove the water.Finally, to ensure that the system will continue to work in all eventualities, even in a complete power outage, Wise installed a backup system with dual Northstar batteries and a Victron Power Inverter.Even with a project located 10 miles from the mainland, and 1 week to waterproof a basement with only a 600mm wide access hatch, Wise Basement Systems delivered a completely dry space for the client that was also compliant with BS 8102:2009 and backed by their guarantee.
Sponsored
Glazed AOV Smoke Vent - London

Glazed AOV Smoke Vent - London

Surespan

Product:140° degree opening glazed smoke ventilation up to 3m x 1.2m. Here installed and commissioned in a newly upgraded prestigious London address. CE Marked and Certified to EN 12101-2. The AOV features concealed actuators along with a double-glazed top. 1.5 W/m²K Double Glazed Lid Custom made to any size up to 3m x 1.9m
Sponsored
Gunnebo delivers Infection Control Access Solutions to Samsung

Gunnebo delivers Infection Control Access Solutions to Samsung

Gunnebo Entrance Control

Gunnebo has delivered its new infection control and occupancy management systems to Samsung offices across the Nordics, as demand grows for safe working conditions when employees return to work after the Covid pandemic.
Sponsored
A PRACTICAL GUIDE TO ACCESS CONTROL EQUIPMENT FOR EDUCATION CAMPUS’S - Automatic Systems - International

A PRACTICAL GUIDE TO ACCESS CONTROL EQUIPMENT FOR EDUCATION CAMPUS’S - Automatic Systems - International

Automatic Systems UK & Ireland

As a specialist in the automation of access control, Automatic Systems is well aware of the issues faced, especially in the light of recent events, and can offer tailored solutions that not only meet student and staff security needs but also the health and wellbeing of all.
Sponsored
7 things you need to know about Coxdome Firejet JetCox SHEV Unit Smoke Vent

7 things you need to know about Coxdome Firejet JetCox SHEV Unit Smoke Vent

Trade Access Panels

AOV or Automatic Opening Vent systems control the airflow of smoke in a fire. According to EN12102-2 it is a statutory requirement to have an AOV unit on a new construction. Since 2006, Europe has required that the AOVs meet with the standards set forth in DIN EN12102-2. As a result, many companies have made their versions of AOVs. Majority of these options only go as far as barely meeting the before stated regulations. However, the Coxdome Firejet SHEV exceeds the expectations and requirements of a standard AOV.
Sponsored
Department of Environmental Affairs

Department of Environmental Affairs

SE Controls

Natural smoke and environmental ventilation as part of an energy efficient building strategy.
Sponsored
Only a functioning smoke alarm can protect you

Only a functioning smoke alarm can protect you

Safety Technology International Ltd

Protecting detection systems is vital to fire safety with only a functioning smoke alarm able to protect you in an emergency.Landlord regulations and Government policesLandlords have responsibilities to keep tenants safe in their properties by providing functioning life safety equipment.Regulations introduced in 2015 require private sector landlords to ensure they ‘have at least one smoke alarm installed on every storey of their properties’ as a legal requirement.There is also a proposed change to this regulation, coming into effect later this year, which will mean social housing is also included, making it mandatory that all rented accommodation must have working smoke alarms fitted. It will also be compulsory for landlords to repair or replace any faulty alarms as soon as they are made aware of defects.Fines up to £5000To protect their tenant, it is the landlord’s responsibility to ensure detectors are fitted and working at the start of every new tenancy agreement. Failure to comply with The Smoke and Carbon Monoxide Alarm Regulations introduced in 2015 can result in a hefty fine of up to £5000.One exasperated landlord wrote online that in one of his properties “Two of the detector heads have been tampered with, presumably so that the tenants can smoke in their rooms”. Consequently, this had been causing false fire alarms and it is up to the landlord to repair or replace the alarm.In some extreme cases, landlords have discovered that smoke alarms have been removed all together from properties, due to disturbances when cooking, smoking, etc. It is then up to the landlord to replace the alarm, and so it is advisable to invest in measures to prevent the alarms removal; some recommendations have been made in government legislations such as BS 5839-6:2019.Ultimately, landlords should feel obligated to ensure regular testing of smoke alarms and the replacement of batteries in their properties to reduce the risk of void insurance or a remedial notice. Simply testing smoke alarms can also help to prevent any danger to tenants and damage to properties should a fire occur.BS 5839-6:2019The latest recommendations in BS 5839-6:2019 are primarily concerned with saving lives and reducing injuries caused by fire, but also covers reducing property damage, which can be extremely costly to landlords in the case of fires.The guidance in BS 5839-6:2019 suggests that in environments such as HMOs, where multiple occupants can be disturbed by false alarms, landlords could alter their smoke alarms systems to have delays before the signal is sent to all tenants for the occupier to investigate the cause. This can help to reduce complacency during false fire alarms or the temptation to dangerously compromise smoke alarms.The recommendation also states that landlords should seek alternative smoke alarms that can alert to intervention or disablement of the alarm in the event of tenants continually tampering.Tenants’ responsibilityAlthough it is the landlords legal duty to provide working smoke alarms in all properties, tenants must not tamper with smoke alarm, remove them, cover them up or in any other way damage or prevent them from operating in their intended manner. Failure to comply with this could result in the tenant facing a substantial fine, or termination of their tenancy agreement.It falls to the tenants to take their own safety into consideration and should contact landlords if there are any issues with smoke alarms, such as false fire alarms, so their landlord can test and replace the batteries, or alarms themselves if necessary. Preventing alarms from effectively detecting fires can result in fatal incidents and also fines for misconduct falling to the tenants.One student at Edinburgh University covered the smoke alarm in his room with bubble wrap whilst living in student accommodation. Preventing the smoke detector from working effectively proved a dangerous mistake when a fire started in his room and he had to be pulled to safety after being found struggling to escape the flames while the building was being evacuated. As a consequence for this reckless behaviour, he was fined and ordered to pay £1000 in compensation after being arrested and pleading guilty.Steel Web Stoppers®  Safety Technology International is a specialist manufacturer of a range of fire, safety and security products; their wire cages help to prevent tampering with essential life safety equipment, such as smoke alarms.STI’s Steel Web Stoppers®  are designed to protect against vandalism, misuse and damage to smoke and fire detectors. Constructed from plastic coated, heavy-duty galvanised steel rod, the Steel Web Stoppers can withstand the severest of abuse from vandalism or accidental damage. It also prevents tampering with the alarm, without hindering legitimate use, therefore still allowing the landlord to service the device and replace batteries when appropriate.
Sponsored
A Quantum improvement

A Quantum improvement

Glen Dimplex Heating and Ventilation

With a housing stock that dates from the 1900s to present day, Vale of Aylesbury Housing Trust provides affordable housing for more than 17,000 people living and working in Aylesbury and the surrounding villages of the Vale. After a successful, no risk, no obligation trial, it was clear that the Dimplex Quantum off-peak heater was a fitting choice for the Trust’s varying housing stock - delivering controllable heat on demand.
Sponsored
NIBE Ground Source Heat Pump installed for training college

NIBE Ground Source Heat Pump installed for training college

NIBE Energy Systems Ltd

South Lanarkshire College (SLC) in Scotland has opened a new, ‘zero-energy’ teaching block on its East Kilbride campus. Specifically designed with first-rate environmental credentials in mind, it boasts a whole host of efficiency-enhancing measures – including highly insulated floors, walls and roofs, triple-glazed windows, low-energy lighting and electrics, rainwater harvesting and solar PV panels on the roof. The college approached NIBE Pro Installer Anderson Floor Warming and Renewables in search of a system that would meet the heating requirements of the eight-classroom block in the most sustainable, cost-effective and reliable way possible.The SolutionSLC already has a range of NIBE products in its on-site renewables training centre, which students use for practical sessions, so a heat pump from NIBE was the natural choice to heat the new block. Mike Anderson, director at Anderson Floor Warming and Renewables, specified, designed and fitted a NIBE F1345 40kW ground source heat pump (GSHP) system to complement the building’s water-based underfloor heating, which operates at similarly low flow temperatures.ResultsNow up and running, the NIBE system is so efficient that it has been awarded a rating of A+++ in line with energy labelling criteria under the ErP Directive. SLC’s new teaching block has become the first building in the UK to achieve a BREEAM sustainability rating of ‘Outstanding’, with the facility excelling in all 10 assessment categories – from energy, waste and water to health and wellbeing.Customer Testimonials“We pride ourselves on our forward-thinking approach to sustainability at SLC, and we couldn’t be happier that our new teaching block has been deemed ‘Outstanding’ by BREEAM assessors. The NIBE heat pump system and the solar PV panels combined generate enough renewable energy to meet the block’s entire heating and power needs, making it a ‘zero-energy’ building. It really is a huge asset to the whole college – not only from a resource point of view, but also as a real-life example of sustainability in action. As well as being a valuable learning space for our construction and energy students, it’s a place for us to bring local businesses and community groups, and showcase the benefits of low-carbon, low-resource buildings first-hand.”Stewart McKillop, principal at South Lanarkshire College
Sponsored
Lusail Multipurpose Hall

Lusail Multipurpose Hall

SE Controls

Facade automation for replacement air intake and smoke extraction in accordance with EN 12101-2
Sponsored
Manufacturing Facility Heating- Manchester

Manufacturing Facility Heating- Manchester

Powrmatic Ltd

OverviewPowrmatic was selected to supply a manufacturing facility heating system in a new 60,000sq.ft building in Manchester which was expertly installed by our trusted and long-standing engineers at Swiftheat Gas Services Limited. Four LX60 heaters, one LX90, and eight CECx4500 destratification fans were installed into the facility.Project BackgroundSystem 3 Limited, a leading manufacturer of high-specification insulating glazing sealed units and toughened-laminated glass, was expanding production into new premises. They needed a reliable and efficient heating solution for their newly refurbished premises. Swiftheat was recommended by Powrmatic, a family-run business with a reputation for providing commercial heating solutions and industrial heating installation.SolutionSwiftheat Gas Services Ltd provided a complete installation of the heating system for System 3’s new premises. The installation consisted of 5 ErP-compliant suspended LX60 and LX90 warm air gas heaters and eight CECx destratification fans to assist with air circulation. The building size was 60,000sq.ft, and the entire project required an 88.9mm stainless steel gas line.ResultSwiftheat Gas Services Ltd provided a complete installation of the heating system for System 3’s new premises. The installation consisted of 5 ErP-compliant suspended LX60 and LX90 warm air gas heaters and eight CECx destratification fans to assist with air circulation. The building size was 60,000sq.ft, and the entire project required an 88.9mm stainless steel gas line.
Sponsored
Soundis Raised Floor System & Underfloor Heating Boards at Holland Park, Kensington, London

Soundis Raised Floor System & Underfloor Heating Boards at Holland Park, Kensington, London

Soundis

Holland Park Villas has set a new benchmark for quality in the super-prime central London residential development market. Unparalleled interior finishes combined with exceptional landscapes to show what a truly world-class team can deliver.On arrival, an impressive 30 year old Acer Palmatum tree takes centre stage. Granite paving, hornbeam trees, ornamental planting and a water wall further add to this sense of elegance and quality.This level of quality and attention to detail continues to areas not easily seen by the new tenants. Around 13,200 m2 of Soundis High density dry screed panels able to span between joists were installed by our installation partner UK Acoustic Systems as a raised access floor system. Chosen primarily for the ease of maintenance and future extensions of the underfloor network, the system is also an integral part of the underfloor heating system.Not only does this system demonstrate its practical heating properties, but the new apartments will also benefit from the pleasant acoustic characteristics provided from the floor system.
Sponsored
Newton System 500 Controls River Thames

Newton System 500 Controls River Thames

Newton Waterproofing Systems

Newton System 500 provides a complete waterproofing solution for a boathouse situated on the River Thames, installed by Newton Specialist Basement Contractor Stonehouse. Newton Waterproofing Systems were contacted to provide a solution for a delightful boat house on the River Thames.The property originally had a wet dock but this had been back filled and capped with a concrete floor. The client wished to use the ground floor as a bedroom, but during a recent flood the water level had reached 500mm internally.Newton System 500 provided the ideal solution, as it works by redirecting the water, rather than trying to hold water back – which would be impossible under such pressurised conditions. Newton 508 Mesh was chosen for the walls, Newton 520 to the floor with a Newton Basedrain ring around the perimeter. Two Newton Titan Pro pump systems were used, which included a battery back up system.Newton System 500 was installed to this property by Newton Specialist Basement Contractor Stonehouse BasementsRather than holding water pressure back, therefore, it was accepted that the river would penetrate the structure and would be pumped out. The system is designed so that ingressing water is depressurised by the Basedrain and then moved around the Basedrain ring to the two Titan sump chambers. The chambers each had 40mm discharge lines exiting the structure. Both pump systems had non-return valves so if the river rose over the level of the pipe the pumps would still be effective.The full waterproofing system was installed in a little over a week. The major test came when the River Thames rose against the property to a depth of over one metre! The Newton System 500 waterproofing system coped with the water ingress as designed. At the height of the flooding, all three pumps in each sump chamber were operational. The system proved to be fully successful.
Sponsored
NIBE Ground Source Heat Pump Commercial Installation

NIBE Ground Source Heat Pump Commercial Installation

NIBE Energy Systems Ltd

Teesside-based logistics firm AV Dawson has built a new 130,000m3 warehouse specifically to store £15m-worth steel coils for a nearby international car manufacturer. With the steel at risk of ‘sweating’ and rusting in high humidity levels exceeding 65%, the company was tasked with ensuring a very specific climate for the warehouse (without which the steel would be rendered unusable), while also maintaining low energy costs.The SolutionHoward Tribick, director at local renewable energy specialist and NIBE Pro Installer HT Energy, specified, designed and fitted ten NIBE F1345 ground source heat pumps (GSHPs). Given the site is built on top of an active water table (the River Tees), Howard and the team were able to make the most of the surroundings as a natural energy source. The heat pumps collect heat from 70 bore holes, each 150m deep – a total of 10,500m of active bore hole depth. Each 60kW GSHP is paired with its own ventilating unit and 500L NIBE UKV buffer tank – producing a total output of 600kW. Solar panels on the roof provide an additional 220kW to help meet the warehouse’s electricity needs.ResultsWith the ten GSHPs now fully operational, the results have been even better than expected – with a seasonal performance factor (SPF) of 3.65 and average humidity levels of just 47%. Interconnected with 3km of header pipes, the GSHPs are spaced equidistantly along one side of the 264m-long building. The units are set up as separate systems, so they can work independently of each other or together as required. This provides an added level of security for the customer, ensuring the system can cope at all times and the steel is kept at optimum conditions.Customer Testimonial“This system made perfect commercial sense for us. While the initial outlay was greater than some of the other alternatives, GSHPs provided the most cost-effective solution by far in the long term. In fact, compared to natural gas, we will be making an impressive energy saving of 1.58 million kW/h each year. Our projected payback period is just ten years and we’re also benefiting from Renewable Heat Incentive (RHI) payments for each unit of renewable energy we’re generating.”Gary Dawson, managing director, AV Dawson
Sponsored
Retrofit NIBE air source heat pump project for Manchester City Council

Retrofit NIBE air source heat pump project for Manchester City Council

NIBE Energy Systems Ltd

Background to the projectSouthway Housing Trust is a South Manchester based housing association managing 6,000 local homes.Southway has pledged to be zero-carbon by 2038 and has identified switching its homes from gas to electric heating as crucial to achieving this target.In 2022, a survey of Southway’s residents found that 88% were keen to reduce their impact on climate change, and Southway’s commitment to reducing carbon is in line with Manchester City Council’s net-zero ambitions.The Arrowfield Low Carbon Living Project represents an early and ambitious retrofit of a south Manchester neighbourhood that will reduce the estate’s carbon footprint by as much as 50%.Southway is replacing 396 of Arrowfield’s inefficient gas boilers in-line with long term government plans to electrify heat and will also improve the fabric of homes to make them more energy efficient.The scale of the project, part funded by the European Regional Development Fund (ERDF), has made it one of the UK’s biggest home retrofit schemes.NIBE products used:NIBE F2040 Air Source Heat PumpKey stats:112 NIBE F2040 Air Source Heat Pumps installedContributes to project to remove 370 tonnes per annum of CO2 in ArrowfieldInstalled by Rothwell Plumbing GroupPart of a project to retrofit 199 homes with air source heat pumpsThe solution to the projectArrowfield Low Carbon Living is a flagship scheme in Manchester, retrofitting 199 homes and 197 apartments with air source heat pumps. NIBE was chosen as one of two heat pump providers to bring low carbon, sustainable heating to residents living in the Arrowfield estate. NIBE’s high quality, reliable heat pump systems provide optimum savings and automatically adapt to each home’s output requirements.Rothwell Plumbing Group (RPS) was chosen as the installation partner for the project, with a proven track record for delivering high quality heat pump systems, in both the public and private sectors. RPS are also MCS & Trustmark accredited, with the experience and technical ability to install NIBE systems to the highest of standards.Southway’s aim is for the project to act as a learning process and blueprint for how it can scale up the retrofitting of its entire housing stock over the next 15 years.Ahead of this ambitious project, a community engagement programme enabled greater awareness of heat pumps as a low carbon heating solution, whilst providing the opportunity to listen and respond to resident feedback.The Arrowfield Hub, located in in a repurposed empty house on the estate, became a venue for regular engagement between the residents and the project team, creating an open forum for questions and comments on the proposed scheme.The Hub was also heated by an air source heat pump, allowing residents to witness a live heat pump in operation and experience the warmth of the building.Residents were also able to express their concerns surrounding the project, and these could be addressed accordingly. This regular and open engagement was key to keeping residents informed and more familiar with their soon-to-be new heating systems.The Hub also allowed for the project team to dispel common myths and misconceptions about air source heat pumps and reassure residents that their homes would remain warm throughout the yearThe Results112 NIBE’s F2040 Air Source Heat Pumps have been providing heat and hot water to residents across the estate, adapting to the requirements of each and every home in the estate, whilst providing powerful output even down to outdoor temperatures as low as -20°C.The systems will provide homes across the estate with optimised energy and cost savings, whilst supplying a supply line temperature of up to 58°C regardless of outdoor temperatures.TestimonialMatt Roberts, Strategic Director of Property and Development at Southway Housing, said:"Community engagement for the Arrowfield Low Carbon Living Project was central to the project's aims. Foregrounding the needs of Arrowfield's residents as central to the project’s implementation, helped us to better convey the benefits of low carbon heating and address concerns and suggestions brought forward by homes set to benefit from the retrofit scheme.Air source heat pumps are essential to Southway Housing Trust decarbonising our housing stock and achieving our net-zero goals. Working in partnership with NIBE is part of that process and has contributed to achieving carbon savings of 370 tonnes CO2 per annum on Arrowfield.”About the installerRothwell Plumbing Services Group Ltd, formed in 1997, are a family run business specialising in delivering renewable solutions across the North of England. The company helped to ensure residents in Arrowfield Estate could access maximum energy savings and reduced energy bills.
Sponsored
Kai Tak Cruise Terminal

Kai Tak Cruise Terminal

SE Controls

Façade automation for failsafe natural smoke ventilation in a prestigious infrastructure project.
Sponsored
Swansea University - Bay Campus

Swansea University - Bay Campus

SE Controls

Residential smoke ventilation via window automation, in accordance with EN 12101-2
Sponsored
Aerona³ heat pumps take heating to a new level

Aerona³ heat pumps take heating to a new level

Grant Engineering (UK) Ltd

A chapel in North Yorkshire has been renovated and converted into a home where two Aerona³ R32 air source heat pumps have been installed to provide the heating and hot water. With the space outside of the property limited, Grant’s compact and slim heat pumps were the perfect solution.

Showing 37-72 of 1361

Feedback