"single ply roofing"

Bilco UK's CS-50TB Roof Access Hatch provides the perfect solution for roof-top access at Blair Castle, Scotland. The Category A listed building is said to have been constructed in 1269 and has been extensively added to over the years. Maintaining such a historic monument is a massive task. The Atholl Estate employ an army of staff to ensure this iconic property is preserved for future generations. One of the many problems in looking after such a building is the fact that it was not designed with ease of access to the roof in mind.

The Protec System was used to waterproof the domed green roof areas of this striking, sustainable house development which was featured on Chanel 4’s Grand Designs. With an ambitious vision and a tight budget, Robert and Milla Gaukroger set about transforming a dated 1980’s house overlooking Lake Windermere into a state-of-the-art, eco-conscious home. Since the house lay in beautiful hillside surroundings, in order to blend into this setting, the domed roofs of the house were to be covered with a wildflower meadow mix to provide a green roof construction.The SolutionThe Protec System was chosen as a waterproofing membrane for the roofs as it is ideally suited for green roof applications. Lightweight, flexible and highly durable, the system can easily accommodate structural expansion movements and is tough enough to resist root penetration. The Protec system was applied to over 350m2 of domed roof to provide a long-lasting waterproofing membrane.The key reasons why Eastleigh chose Protec are the same reasons that has seen it become one of the fastest growing cold-applied liquid roofing systems in both the new build and refurbishment markets. Combined with the timber cladding to the verticals of the building, the finished aesthetics of the development blended seamlessly with the surrounding areas.A warm roof build-up that can be made waterproof at multiple stages:For larger projects the Protec system can be made temporarily waterproof at two stages prior to the application of the full waterproofing system. The first stage is upon installation of the sealed, aluminium-faced vapour barrier.The second phase follows the reinforcing of the foil-faced insulation board joints with Protec resin and taping mat. This enables a much more controlled approach to the installation with a greatly reduced chance of rain causing disruption and damage during the works.Highly flexible membrane:Regardless of the size of the roof, Protec forms a homegenous membrane, without a single joint or seam and without the need for any expansion joints.RapidCure technology for quick installation:The application of Protec as a liquid, through to the curing process where a solid, tough membrane that can be walked over, takes only 30 – 60 minutes. This enables large sections of the roof to be fully completed in a short space of time.Installing the Roofing SystemsThe Protec System provided waterproofing to all flat roof areas as well as the extensive parapet wall sections. The roof areas were made up of two designs: the Protec Warm Roof System (approx 7,500m2) and Protec applied to concrete as part of an inverted roof design (approx 1,000m2).The roof installation was carried out with a planned, phased approach that was synchronised to the wider construction schedule. For the warm roof areas, the first stage was to fill the troughs of the structural metal roof deck with acoustic insulation infills that will dampen external noise within the leisure centre. Next, the crowns of the deck were primed ready to receive the self-adhesive vapour barrier.The use of a high-performance aluminium vapour barrier not only eliminates the risk of condensation within the roof, but also provides temporary waterproofing protection, which is extremely useful on larger works such as this.The Polyroof RES Insulation boards, which comprised of a two layer system totalling 170mm to achieve a U-Value of 0.14 W/m2K, were bonded using high-performance PU adhesive to the vapour barrier. Following the wind uplift calculations it was determined that mechanical fixings were not required for this application – making for an extremely rapid installation. As you can probably imagine, fixing through 170mm of insulation into the crowns of the metal deck can be a tricky and time-consuming task.A key advantage of using a tongue and groove insulation system is that the finished surface of the roof is smooth and level without any unsightly board steps that can also lead to standing water issues. The insulation board joints were sealed using Protec resin with Polymat Taping Mat 450 which, in addition to providing additional strength to the joints, also creates a temporarily waterproof layer.For the inverted roof sections, Protec was applied directly to the primed concrete/screed surface. The membrane was inspected by Polyroof Technical Services, signed off and then covered with inverted roof components. An interesting fact when using Protec in inverted roof situations is its incredible durability performance – as tested by the BBA, Protec “can provide an effective barrier to the transmission of liquid water and water vapour for the design life of the roof in which it is incorporated”.Monitoring and CompletionThroughout the duration of the contract, Polyroof Technical Services carried out regular site visits that were reported back to Interserve as part of Polyroof’s free-of-charge contract monitoring service. This enabled the client to keep up-to-date with the progress of the roof installation in detail and also provided peace of mind that the original specification was being closely followed and implemented.Polyroof worked closely with the Roofline Group during the installation, enabling the challenges were identified and solved in an efficient and coordinated manner – saving the client time and money.

Liquasil Ultra PU is a BBA approved flat roof waterproofing membrane. Cold-applied, the system comprises an embedment coat, into which a chopped strand reinforcement mat is laid to provide exceptional strength. The mat dissolves and allows for hand-moulding around difficult details. Once cured, the Liquasil PU UV coat is applied to provide additional strength, durability & protection. The completed system comes with the unique Latent Defects Insurance Guarantee, which provides cover for Professional Design. Specify with 100% confidence. Made in the UK.

This project had incredibly restricted access, where the client wanted a green roof on an existing bitumen rooftop overlooked by hotel rooms. The M-Trays® had to be transported on a trolley through the hotel kitchens. They were winched onto the roof itself using a genie lift and slotted into position in a matter of hours. Trying to construct a roll-out green roof was impossible, given the restricted access. Installation was fast and effective, taking only a day and giving an instant green roof. M-Tray® dramatically improved the view from the rooms and improved the guests’ experience.

Museum of London - Visionary RoofSynopsisThe Museum of London opened in 1976 on the historic London Wall and is a few minutes’ walk from St Paul’s Cathedral. A visionary approach to roofing had been adopted on a building that, will not only green as much of the exposed roofs as possible, but also provide a strong research aspect for future green roof projects. As with many buildings, the original roofs needed to be upgraded or replaced, at the same time as being brought up to date using environmental and sustainable solutions.Through the recommendation of waterproofing and green roof manufacturer Bauder Ltd, the Museum invited Dusty Gedge, one of the UK’s leading independent green roof consultants, to work directly with them to design 3500m² of varying habitats that encompassed the museum’s sustainable vision. and help in the provision of environments that would attract a range of wildlife, as well as being able to help the city adapt to climate change.Bauder Building BoardProject:Visionary roof, Muesum of LondonLocation:LondonProject type:RefurbishmentRoof size:9512m²Specifier:Museum of LondonRoofing contractor:Russell Trew LtdThe specificationAn independent consultant had previously carried out an energy model on the Museum of London buildings. When the museum inputted the green roof specification, it showed a potential energy saving of 10% per year, as well as a reduction on the future replacement costs of the heating and cooling plant. Some of the green roofs were funded through Drain London, a partnership project led by the Greater London Authority and funded by Defra. The project aims to better understand surface water flood risk across London, with a view to promote interventions (such as green roofs) to reduce surface water flooding. The museum has used the Bauder green roof system and worked closely with Dan Costen of Bauder and the roofing contractor Russell Trew Ltd, to deliver the various green roof spaces.These include:The refurbishment of the lower garden in the central courtyard with hard landscapingThe installation of Bauder’s new wildflower blanket to the upper garden in the central courtyard (funded through Drain London)Plug planting the roofs of the recently completed garden and terrace rooms that provide high quality corporate hire (matching the colour scheme chosen for the rotunda garden refurbishment and integrated with the new rainwater harvesting system funded by Renaissance London)An integrated sustainable urban drainage system (SuDS)Plug planting in other individual small roof areas including outside the boardroom and committee roomsTwo different planting schemes on an area of the main museum roof where the Drain London Project aims to carry out water attenuation researchThe resultRetrofitting green roofs will help to realise the Mayor of London’s ambition, to increase green cover in central London by 5% by 2030. The Museum of London is one of the largest retrofit green roof projects in the City and is certainly to be commended for allowing its roofs to be used for research purposes. Not only will it provide a benchmark for best practice, but it also demonstrates that retrofitting green roofs onto existing buildings is both environmentally and economically viable and is the way forward in helping London adapt to climate change.System installedBauderflex Green 1 BauderPLANT E 42A torch applied SBS elastomeric bitumen capping sheet. This product features chemically treated bitumen to deliver superior root resistance which has been tested and approved by the FLL2 BauderTEC Sprint DUOA self-adhesive elastomeric bitumen underlayer with DUO lap technology. This product has a glass fleece reinforcement feature for stability and strength.3 BauderPIR FA-TEFlatboard insulation boards containing rigid polyisocyanurate (PIR).4 BauderTEC KSD FBSA self-adhesive SBS elastomeric bitumen air & vapour control layer, with a mica finish.XF 301 Sedum System1 BauderGREEN XF 301Sedum vegetation blanket instantly providing at least 90% coverage on an extensive green roof. Integrated water retention and filter layer.2 BauderGREEN AL 4040mm high perforated edge/drainage trim frames and retains the Bauder XF 301 sedum system.3 BauderGREEN SDFMulti-functional drainage and filtration layer which prevents the roots of sedum plants from becoming waterlogged.4 BauderPLANT ETorch-on root-resistant capping sheet green.AdvocacyGavin McCourt MRICS, Project Manager for The Museum of London said:“In producing the business case for installing green roofs, reference was made to the extensive published documents on the benefits of green roofs. In this case as the museum building had already been energy modelled by outside consultants, it was decided to input the green roof specification into the model. The results showed a potential energy saving of 10% per year, as well as a reduction in future replacement costs for heating and cooling plant. These factors, combined with the longer life cycle replacement of green roofs compared with normal felt roofing systems, enabled me to produce a robust business case for green roofs. With increasing energy prices the economic benefits of installing green roofs can only become more viable”Dusty Gedge added:“One of the major issues that London faces is flash floods during the summer, when sudden rainfall levels overwhelm the current drainage network. With the support of Drain London we will be researching the rainwater run-off for different green roofs. This will help us validate the kind of roofs and depth of substrates that will negate the costly effects that the sudden rainfall has on the infrastructure of the City.”

Russell Roof Tiles worked closely with the roofing contractor to supply tiles for a rural exemption scheme.

Russell Roof Tiles su.pplied 200,000 Highland roof tiles in Cottage Red for a reroof project

London GRP Roofing Ltd, specialists in fibreglass flat roofs and terraces, recently completed a Degaflex roofing installation using our high-performance system and gave their professional opinion.Stephen Knuckey, the Director of London GRP Roofing Ltd. posted on LinkedIn photos of their project along with a comment of ‘our "Degaflex overlay. Safe to say I am extremely pleased with the finish on this. Being a felt overlay and turning out this smooth, I’ll be looking forward to applying it directly to an OSB deck.’

The Royal Blackburn Hospital, located in Lancashire, England, was dubbed a “ticking time bomb” that could “collapse without warning” due to the failure of its existing reinforced autoclaved aerated concrete (RAAC) roof. This issue was part of a larger nationwide crisis, with 34 NHS buildings, including Blackpool Hospital, and thousands more schools, offices and more at risk of collapse due to the deterioration of RAAC structures. The estimated cost of repairs for these buildings loomed at over £1 billion. In the face of this urgent and challenging situation, The Royal Blackburn Hospital sought a solution to ensure the safety and integrity of its infrastructure.The Royal Blackburn Hospital's existing RAAC roof had reached a critical state of disrepair. The risk of a catastrophic collapse was real and imminent, posing a serious threat to patients, staff, and the hospital's ability to provide essential medical services. The financial burden of repairing or replacing such a roof was substantial, and the hospital needed an innovative, cost-effective, and expedient solution.The hospital administration and engineering team explored various alternatives to address the RAAC roof crisis. After careful evaluation, they opted for Britmet's Tactray 90 Structural Liner System as the best solution to mitigate the risk of a roof collapse. Tactray 90 offered the necessary structural reinforcement while ensuring long-term durability and stability. The installation could be completed with minimal disruption to hospital operations, a critical consideration given the hospital's 24/7 operation.Project Outcomes:Implementing Britmet's Tactray 90 Structural Liner System at The Royal Blackburn Hospital resulted in several significant benefits. The hospital's roof regained its structural integrity, mitigating the risk of collapse. The hospital saved a substantial amount by opting for the Tactray 90 system as it provided a weatherproof roof covering to minimise the impact of construction so that the hospital could resume full medical services quickly, ensuring continuity of patient care. Conclusion: The Royal Blackburn Hospital's adoption of Britmet's Tactray 90 Structural Liner System offered an innovative solution to a critical structural problem caused by the failure of the existing RAAC roof. This case study demonstrates that even in challenging situations involving aged infrastructure, cost-effective and efficient alternatives exist to safeguard structural integrity, ensure safety, and enable the continued provision of vital healthcare services. The success of this project serves as a model for other NHS facilities grappling with similar RAAC-related challenges, providing hope for the resolution of the wider national crisis.

Another example of the BBA Approved asbestos roof coating system, Asbestsoeal from Liquasil Ltd. The asbestos cement roof was first cleaned using a closed box pressure washer. All waste was filtered and disposed of by a licensed asbestos disposal contractor. Metal fixings were treated with Liquasil SWT Corrosion Primer and then sealed, along with small cracks and holes, with Non-Sag Sealer before the roof was coated with Asbestoseal 20. The project included GRP rooflight replacement and new ridge detail and flashings.

This asbestos cement roof in Norwich was soiled with moss and lichen covering the surface and had leaks in several places. Liquasil's BBA Approved Asbestoseal 20 asbestos roof coating was specified to extend the life of the roof and provide an aesthetically pleasing finish. The Contractor, ID Asbestos Ltd, carried out the works safely and efficiently.After being steam cleaned, the metal fixings were treated with our SWT Corrosion Primer and all fixings and cracks were sealer with Non-Sag Sealer. The whole roof was then coated with Asbestoseal 20 to provide a sleek new finish to the old asbestos sheets.Liquasil's Latent Defects Insurance Guarantee was provided upon completion.

This Awkward Passivhaus design barrel roof made airtight with ease with Spray applied Airtight vapour control membrane Passive Purple

- Location: The Roof Gardens, Apartments, Manchester - Developer: DeTrafford Estates Group - Challenge: The previous intumescent varnish on external timber panelling on walls and decking broke down after just 12 months. - Solution: Remove existing coating, apply Zeroflame Treatment - Result: Original beauty of the decking and timber paneling on the walls is resorted, the timber is compliant with building regs and the property owner is happy.

Green roofing forms a key part of roof design as part of a model for sustainable living in 21st century London. Barking Riverside is a joint venture project between Bellway Homes and the Homes & Community Agency. It is an element of the Mayor of London’s plan to build 10,800 new homes, retail, transport links and new town facilities in the Barking region of East London.

Using materials, shades and textures that work in harmony with rural surroundings is always an important consideration for designers and planners. In Hertfordshire an ancient barn has recently been converted to provide additional accommodation for the nearby house.The new roof of the C16th barn was constructed with Cadisch Welltec perforated profiled aluminium panels over a waterproof membrane. Visible roof lights on such an ancient barn were not permitted but some light is able to penetrate through unobtrusive roof lights which are entirely covered by the perforated Welltec. The outline of the windows can just be made out in the photograph.The corrugated effect of the Welltec already lent a rustic charm to the roof and the owners needed a coating for the aluminium that would both protect the roof and also give the appearance of an old building.Taking inspiration from natural elements, EvolutionTM powder coatings allow architects and designers to achieve the look they need, together with using the most appropriate materials for the job and satisfying planning requirements on a local level.  The panels and ridge cappings totalling over 200 square metres, were pre-treated in a chrome-free system and powder coated in EvolutionTM ‘Peat fire’ at Powdertech’s Corby plant, before being delivered to site for installation. Peat fire is an earthy shade, instantly giving an aged look to the roof. It is a shade that one might expect on a weathered ‘tin roof’ – but in this case the metal stands the Evolution™ system.”  BenefitsA wide range of effects to reflect the patinas that occur naturally on metalsExcellent visual and tactile detailHigh performance weather resistanceGood edge coverageAll powders are Qualicoat 1Leaves no residue or stainTwenty-five year guarantee.

The finish to the asbestos roof and asbestos cladding on this property was faded and the roof leaked in several places, along with the gutter. Liquasil's silicone roof coating, Asbestoseal, was chosen to seal the roof and dramatically improve the aesthetic appearance using specially made RAL colours to the match the original finishes. The asbestos cement gutter was also lined with the Liquasil liquid gutter liner to form a permanent, bonded solution.

Failing factory finishes and cut edge corrosion were present across the entire roof and Liquasil's Metalseal metal roof coating system was specified as the most appropriate solution. The roof was cleaned and all failing finishes and rust was removed as far as reasonably practicable. The roof was then coated. In this case, two colours were employed. Liquasil is the only company able to produce silicone coatings in any RAL colour.

This was the first asbestos roof coating project undertaken with Liquasil products, back in 2013. The roof was heavily soiled and was cleaned using a DOFF steam cleaning machine, delivering 150°c steam to completely kill moss and lichen spores. The metal fixings were treated with Liquasil's corrosion primer and sealed with Non-Sag Sealer before the whole roof was coated with Asbestoseal, the only BBA Approved asbestos roof coating.

The Ascent Aluminium Roof Access Steps were specified to meet the clients requirement to create a safe access route up & over the “saw-tooth” roof for maintenance personnel. In this instance the Ascent steps were specified for use with an adjacent MSA Latchways climb-latch fall protection system. If collective protection is required handrails can be supplied to one or both sides of the steps. The Ascent Aluminium steps were specified for this project by Eurosafe Solutions Ltd a specialist fall protection company who also installed steps. The Ascent Aluminium walkway steps are tested for use on the aluminium standing seam roof and are secured back to the roof sheet using a proprietary support clamp. The Ascent aluminium walkway is designed in accordance with BS EN 516:2006 Prefabricated accessories for roofing, BS 4592, Industrial Type Flooring and stair treads, BS EN ISO 14122-3 Stairs, stepladders and Guardrail, BS 7976-2:2002+A1:2013 Pendulum slip resistance. And is manufactured under ISO 9001 and CE 1090 factory production control procedures, creating a walkway that is CE / UKCA compliant.The walkway steps can be configured with a handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty) and can be supplied with an optional toe-board if required. The system can achieve these loadings without the need for additional bracing, allowing the walkway to be placed against the area to be accessed. UKCA / CE marked. Designed & Tested in accordance with BS EN 516:2006 Class 1 Type C. Designed & Tested in accordance with BS EN ISO 14122-3:2016 where a handrail is fitted. Designed & Tested in accordance with BS 4592-0:2006+A1:2012 for loadbearing and BS 7976-2:2002+A1:2013 for anti-slip. With or without handrail.Standardized modular system roof walkway system. Can be supplied with a range of fixing kits to suit different roof profiles.

This complicated asbestos roof structure was heavily soiled and leaking in numerous places. Asbestoseal was specified because it is the only BBA Approved asbestos roof coating on the market. The roof was cleaned using 150°c steam, which kills all moss and lichen spores on contact, leaving a perfectly clean substrate for coating. The success of any coating comes from its preparation and Liquasil teaches all of it approved installers various cleaning methods. The roof was coated and is now leak free with a much extended life expectancy.

A roof at teh Jaguar Land Rover premises in Watford was in poor condition and suffering from cut edge corrosion. All of the loose and flaking factory finish was removed using 4000psi pressure washers and the rusted end and mid-laps were ground back to remove the rust. The cut edge corrosion was treated with Liquasil's corrosion primer and the entire roof was coated using the BBA Approved Metalseal.

A stable conversion project needed an authentic clay roof finish.

A flat roof in the state of Tyrol was used to rigorously test a new non-combustible inverted roof insulation solution for the UK market.

The original factory finish to the metal roof of this property was failing, with the coating delaminating badly due to UV damage. The gutterless eaves construction meant that both the roofs and cladding had to be coated. Metalseal was specified because it is available in any RAL colour., In this case, Juniper Green was required. The original finish was removed with 4000psi pressure washers , before corrosion was treated with Liquasil's corrosion primer before Metalseal 20 was applied.

After first cleaning the roof and attending to rusted areas with Liquasil’s corrosion primer, it was the coated with Metalseal 20 from Liquasil, using airless spray equipment. The specification for this roof was for a special RAL colour. Only Liquasil can make silicone coatings in any RAL colour, so Metalseal 20 was specified for the project. This roof was completed in Forest Green.

A large retirement village at Parkland Place in Bedfordshire required slate appearance roofs.

Russell Roof Tiles supplied tiles to 3 social housing sites in Derby.

Russell Roof Tiles supplied Bute tiles in Burnt Orange for a residential housing project in Hampshire.

As described by the Woodland Trust, Glen Finglas is a great expanse of ancient woodland, lochs and open heathland, sitting at the heart of Loch Lomond and The Trossachs National Park and home to one of the best examples of upland wood pasture in Scotland.The newly constructed Gateway Building was designed to blend in with the surrounding woodlands and featured a circular timber-clad exterior with a spiralling, curved roof. The Woodland Trust approached RTA Building Limited, a Polyroof Approved Contractor, to provide a guaranteed waterproofing solution that would complement the aesthetics of the building.After comprehensive discussions and careful evaluation, we recommended the Polyroof 185 Warm Roof System for this unique project. This system stood out due to its exceptional BBA 30-year durability rating, impressive life-cycle costing performance, and an insurance-backed guarantee that offered the client peace of mind.The implementation process involved the meticulous installation of the Polyroof membrane, which flawlessly covered the flat roof areas while seamlessly following the curved perimeters and intricate spiral design. To ensure a fully waterproof edge detail that complemented the building’s contours, we installed a bespoke GRP capping. This robust combination provided Woodland Trust with a reliable and long-lasting roofing solution.Through our collaboration with Woodland Trust, we successfully implemented the Polyroof 185 Warm Roof System, delivering a durable, and cost-effective roofing solution. Our system’s exceptional durability rating, long-term life-cycle costing performance, and insurance-backed guarantee provided Woodland Trust with the confidence that they had chosen a roofing solution that would stand the test of time. With Polyroof, Woodland Trust achieved a seamless, reliable, and environmentally conscious roofing solution for their unique project.

The roof project in Bermondsey consisted of an accessible green roof for residents on the first floor and a green and brown roof at the next level. Natural Aggregate, 6mm Barley Beach. London

This project involved a brand new Starbucks drive-thru being built in West London where the customer wanted the overlooked rooftop to be green. The customer was able to give the basic dimensions to our team and describe how they wanted the roof laid out. We then calculated the exact quantity of units needed with our inhouse software and gave delivery and installation guidance to the contractor and end client. Wallbarn also supplied the materials for the semi-extensive border including geotextile fleece, drainage board and our specially-developed substrate for a comprehensive green roof solution,

Russell Roof Tiles supplied 26,000 Slate Grey Pennine tiles as part of a £36,000 contract for a total of 13 private homes in Falkirk.

This asbestos roof is being cleaned using a closed box pressure wash, with all waste water being filtered and recovered for re-use. Once cleaned, the roof is coated with the BBA Approved Asbestoseal system which includes: SWT CORROSION PRIMER - fully rust and wet tolerant, the primer is applied to all metal fixing to stop further corrosion. NON-SAG SEALER - is applied to all fixings and small holes and cracks to permanently seal them. ASBESTOSEAL 20 is brush applied to the roof sheets to provide a new finish.

The proprietors of this domestic property in Harrogate added a large extension with a total roof area of 150m2. The client wanted the new roof sections to complement the slate work and aesthetics of the original building whilst adding a contemporary and stylish look to the extension.Originally considering a zinc sheeted roofing system, the client explored alternative materials that could achieve the same visual impact but at lower cost. After discussions with Cure Roofing Ltd, a Polyroof simulated metal finish was proposed as a roofing solution that would meet all the client’s requirements.Not only do Polyroof’s range of liquids offer cost savings over traditional metals, but they are also lighter in weight, totally seamless and can be pigmented to any RAL colour. Having no scrap value, the client also had the added peace of mind that the roof would not be a target for theft.A timber warm roof was constructed which incorporated 120mm PIR insulation to achieve a U-Value of 0.18 W/m2K in compliance with building regulations. An OSB3 TG4 deck was fitted above the insulation and Polyroof pre-formed GRP standing seam trims were fixed at 600mm centres into the deck. Next, the first coat of the Protec waterproofing system was applied over the whole roof area and encapsulating the standing seam trims. The roof was finished with a second coat of Protec pigmented to RAL 7016 providing an anthracite grey colour to the whole roof, accurately simulating the appearance of zinc roof sheets.The workmanship by Polyroof approved contractor Cure Roofing was second to none and the quality of the finish left the client delighted with their new roof. With BBA approval, top-rated fire performance and Polyroof’s trusted 20 Year Accredited System Guarantee, the client has total peace of mind that their new extension could not be better protected for decades to come.

ussell Roof Tiles is supplied our Natural Range Galloway and also the profiled Pennine tile to a total of 128 new build homes in Leicestershire.

The largest SolaGlide retractable glass roof in the UK is the talk of the town! Installed by Breezefree at The Hawk's Nest in London’s Shepherd’s Bush.Working with the team at Birdhouse London, we were presented with the challenge of transforming their outdoor space at The Hawk’s Nest into a flexible all-year space, whatever the weather. Challenges included satisfying the requirements of TfL due to the tube line running immediately above, as well as the venue’s request to have a space to trade in during construction work.The result is a chic hospitality space with a sliding roof that offers options for open airiness or full enclosure from the elements. The roof also offers significant soundproofing, reducing impact on neighbours on their most lively nights. The transformation means that the venue can offer their delicious cocktails, and pizzas that have to be tasted to be believed, underneath an elevated and stylish roof that will help draw diners and revellers for years to come.