NBS Source
I'm a manufacturer

"roof forms"

5,443 results found

Sort by:

Showing 1-36 of 339

Sponsored
Rhenofol CG and green roofing forms a key part of the roof design at Barking Riverside

Rhenofol CG and green roofing forms a key part of the roof design at Barking Riverside

SIG Design & Technology

Green roofing forms a key part of roof design as part of a model for sustainable living in 21st century London. Barking Riverside is a joint venture project between Bellway Homes and the Homes & Community Agency. It is an element of the Mayor of London’s plan to build 10,800 new homes, retail, transport links and new town facilities in the Barking region of East London.
Sponsored
Spectraplan forms roof terrace at Sandbanks Court in Poole

Spectraplan forms roof terrace at Sandbanks Court in Poole

SIG Design & Technology

A green roof system was selected for this project as the client required a roof that would complement and accommodate the step in levels to follow timber decking lines to the 55m² roof terrace areas. IKO Single Ply’s Spectraplan SM120 light grey single ply waterproofing system was overlaid to the existing roof and newly built sun rooms, ready to receive a green roof system.
Sponsored
Spectraplan forms part of a stunning brown roof at Plummerswood

Spectraplan forms part of a stunning brown roof at Plummerswood

SIG Design & Technology

A stunning new ‘brown roof’ is the crowning glory for a private dwelling overlooking the River Tweed. The project has been designed to last 100 years and takes into account the requirements of future generations of the family. For the main flat roof area, Spectraplan TPE was chosen for it's green credentials and a brown roof system was laid on top .
Sponsored
Asbestos Roof & Cladding Refurbishment Coating

Asbestos Roof & Cladding Refurbishment Coating

Liquasil Ltd

The finish to the asbestos roof and asbestos cladding on this property was faded and the roof leaked in several places, along with the gutter. Liquasil's silicone roof coating, Asbestoseal, was chosen to seal the roof and dramatically improve the aesthetic appearance using specially made RAL colours to the match the original finishes. The asbestos cement gutter was also lined with the Liquasil liquid gutter liner to form a permanent, bonded solution.
Sponsored
Curved Trussed Rafter Roof Over Supermarket

Curved Trussed Rafter Roof Over Supermarket

MiTek Industries Ltd

Donaldson Timber Engineering Ltd designed and supplied these impressive curved top chord trussed rafters, to form the contoured roof of a Tesco Express store in Dunfermline. With six locations across the UK, Donaldson Timber Engineering use MiTek's engineering software and connector products to design and manufacture their roofs and floors throughout the UK
Sponsored
A blue roof for a green city

A blue roof for a green city

RENOLIT Cramlington Ltd

Blue-green roof solution on a London dwellingCHALLENGE8a Belmont Street comprises two unique semi-detached dwellings, which have been constructed in Chalk Farm, London by a private developer Maygrove Projects in collaboration with Martin Evans Architects. The total roof area covers only 55.03m² but features an unusual roof design; it is divided into five sections comprising two glazed roofs and three blue roof areas. For this warm roof construction, an alternative durable waterproofing was sought, suitable for blue roof application. SOLUTION Approved Roofing Contractor Gribben Solar Roofing provided an alternative blue roof solution to the original design proposed by the project architects, fully complying with their needs. Together with partner and single ply manufacturer RENOLIT they proposed a waterproofing solution for the blue roof in the form of a fully bonded RENOLIT ALKORPLAN L35A77 membrane, to be combined with the RENOLIT ALKORPLAN Green roof system. So, actually, a blue-green roof!
Sponsored
School Roof Receives Much Needed Fire Protection and Waterproofing

School Roof Receives Much Needed Fire Protection and Waterproofing

IKO PLC

Walker Primary School was opened in 1953 as a one-form entry primary school with seven classes. Over the years, due to its popularity, it has grown and new buildings have been added. Due to the structural design of the building, the roof trusses once exposed meant that the roof changed from one roof to several individual roofs with their own drainage and design issues which meant that each roof had to give its own tapered scheme for each area, which in some cases had to work in tandem with the abutting roof it was next to.
Sponsored
One Chamberlain Square, Birmingham

One Chamberlain Square, Birmingham

Alumasc Roofing

Creating Paradise: Alumasc Delivers for the Complete Building Envelope for One Chamberlain Square Paradise Project One Chamberlain Square is the lead project in a wider vision to create Paradise in Birmingham—the most important development the city has seen in a generation. With the help of Alumasc offering solutions for the entire building envelope, One Chamberlain Square is set to be a vibrant mixed use development that will not only be the new home of professional services firm PwC, but will endeavour to maintain a balance between busy urban hub and the natural world. To do this, Alumasc provided a range of products and services encompassing the entire building envelope, specified by Weedon Architects. This included a Blackdown Extensive Brown Roof, applied over Hydrotech Hot Melt Waterproofing, alongside Harmer Roof Outlets and bespoke solutions from Roof-Pro, for building D: an eight-story commercial building over a podium car park. Inside, bespoke blinds by Levolux, also an Alumasc company, were installed. “This is an extremely high-profile development, which demanded trusted, standard setting products,” said Owen Doherty, Director at Weedon Architects and Project Architect for the venture. “All systems decided on were chosen on quality, durability and enhanced design life compared to competition.” ON THE ROOF OF PARADISEBlackdown’s Extensive Brown Roof is a green roof in the making. Covering approximately 4000m2 of roof space for this project, One Chamberlain’s ‘brown’ roof is installed without plant life and will naturally seed from plant material that either blows in from the local environment or that is introduced by birds. In this way, it literally replaces the green space that has been taken up by the construction of the building it lies on, encouraging biodiversity by providing and strengthening habitats for wildlife local to the area, with truly local plant life. Typically, the substrate is mounded to offer habitat variation, therefore the depth of the brown roof can vary be between 92-170mm and have a saturated weight of approximately 113-213kg per square metre, depending on the depths of the substrate. Beneath this, Hydrotech MM6125 roofing, a hot melt rubber bitumen membrane, delivers sound structural waterproofing. The bitumen is heated and combined with a polyester reinforcement and protection sheet to form a weatherproof layer that has a 100% bond to prepared concrete surfaces. With no product failures in over 50 years, Hydrotech Hot Melt roofing is guaranteed for waterproofing integrity for the lifetime of the structure. Working in tandem with each other, the Blackdown Extensive Brown Roof helps to extend and reinforce the life and guarantee of the waterproofing, offering a protective layer of natural insulation. Giving his seal of approval, Owen said: “I only specify Alumasc hot melt at the moment and have done for many years. All products and systems chosen here have had zero product failures and I have never had any issues with technical specifications on previous high-profile buildings.”PROVIDING EFFICIENT DRAINAGEGiven the huge expanse of roof space involved this project, effective flat roof drainage was essential. Harmer AV high capacity aluminium roof outlets were installed for this purpose. Suitable for all regular flat roofing applications with continuous membranes, these outlets are lightweight, durable, non-corrodible and have been proven to drain 40% more roof area than conventional gravity outlets, therefore further ensuring the long life and service of other flat roof systems. Aiding project completion, Roof-Pro support systems were also tailored bespoke to meet the roof structure requirements. Free-standing support and access solutions were devised that would allow work to be carried out safely, efficiently and without causing damage to any of the roofing systems being installed. A WORD FROM THE CONTRACTORChristian Bradley of Briggs Amasco, who installed the roofing, commented: “One Chamberlain Square and the surrounding podium waterproofing form part of the largest construction programme in Birmingham. We are extremely proud to be working on this landmark project. “The products and systems installed all have long legacies of successful projects behind them, and there are no better guarantees than real results. They also offer excellent value for a competitive cost. These are just a few of the reasons why we love working on Alumasc projects. Alumasc offer a single source for all solutions, bespoke design detailing and the technical support is always on-hand when you need it.” Completed in autumn 2019, One Chamberlain Square forms an integral part of a masterplan redevelopment that will transform part of Birmingham City Centre.
Sponsored
Shallow 3° glass roof rooflight at Cartwright Gardens

Shallow 3° glass roof rooflight at Cartwright Gardens

Lamilux Rooflights Ltd

LAMILUX designed and installed a shallow pitched glass roof for the central courtyard atrium of the student accommodation halls. The 60 equal glass panels formed the 7m X 29m rooflight featuring a sound reduction index of 38dB with double layered heat protection glass. Why LAMILUX were chosen ? LAMILUX could install with a surface inclination of just 3° ? The architect wanted to achieve a class 2 roof for safety of maintenance personnel whilst maintaining a low pitch
Sponsored
Contempory Look Zinc Effect Roof

Contempory Look Zinc Effect Roof

Polyroof Products Ltd

The proprietors of this domestic property in Harrogate added a large extension with a total roof area of 150m2. The client wanted the new roof sections to complement the slate work and aesthetics of the original building whilst adding a contemporary and stylish look to the extension.Originally considering a zinc sheeted roofing system, the client explored alternative materials that could achieve the same visual impact but at lower cost. After discussions with Cure Roofing Ltd, a Polyroof simulated metal finish was proposed as a roofing solution that would meet all the client’s requirements.Not only do Polyroof’s range of liquids offer cost savings over traditional metals, but they are also lighter in weight, totally seamless and can be pigmented to any RAL colour. Having no scrap value, the client also had the added peace of mind that the roof would not be a target for theft.A timber warm roof was constructed which incorporated 120mm PIR insulation to achieve a U-Value of 0.18 W/m2K in compliance with building regulations. An OSB3 TG4 deck was fitted above the insulation and Polyroof pre-formed GRP standing seam trims were fixed at 600mm centres into the deck. Next, the first coat of the Protec waterproofing system was applied over the whole roof area and encapsulating the standing seam trims. The roof was finished with a second coat of Protec pigmented to RAL 7016 providing an anthracite grey colour to the whole roof, accurately simulating the appearance of zinc roof sheets.The workmanship by Polyroof approved contractor Cure Roofing was second to none and the quality of the finish left the client delighted with their new roof. With BBA approval, top-rated fire performance and Polyroof’s trusted 20 Year Accredited System Guarantee, the client has total peace of mind that their new extension could not be better protected for decades to come.
Sponsored
Towers School & Sixth Form College

Towers School & Sixth Form College

Trovex

Trovex contributed to the success of Towers School and Sixth Form College by transforming the washroom facilities in a very short time frame.
Sponsored
Luxury access to the roof terrace by LAMILUX roof access hatch

Luxury access to the roof terrace by LAMILUX roof access hatch

Lamilux Rooflights Ltd

In densely populated urban areas of the cities, where the number of floors in housing is sometimes limited and private gardens are rare, a rooftop terrace or patio is becoming a popular design choice. However, many residential buildings with rooftop gardens don’t see much daylight and careful consideration is required to determine an access point to the roof terrace. For such rooftop projects, a new dimension of roof access is offered by the LAMILUX Flat Roof Access Hatch Comfort range, designed to give a generous daylight intake in attic apartments alongside convenient access to the roof terrace creating an air of grace and beauty both internally and externally. The LAMILUX Flat Roof Access Hatch Comfort range now introduces its fourth product into the family, giving more choice and flexibility when creating a luxurious living space with an exclusive ambience. Featuring unrestricted use as a natural ventilation device and convenient access to the roof terrace, the indoor climate also benefits from the high energy efficiency of the range thanks to the thermally broken frame and excellent air tightness values.The existing Solo and Duo Flat Roof Access Hatch products from LAMILUX open laterally by moving one or two panels horizontally to create direct access to step onto the roof terrace, whilst the space-saving hinged opening Swing variant swiftly opens its one meter by 3000 or 3500 mm long aperture to 84 degrees in just 25 seconds. The fourth, and newest addition to the Access Hatch Comfort repertoire the Square, makes it possible, for the first time, to also use spiral and platform staircases underneath. Until now, access to the roof was limited to straight stairways due to the elongated rectangular shape of the roof access hatch range. The Square only takes 45 seconds for the concealed hydraulic drives to silently open the 4m² glass element of the skylight by 70 degrees. As with the Swing, the new variant does not require any additional space on the roof terrace than its own size in closed form, even when open, thanks to its swing mechanism.   Visually, the aluminium border frame throughout the product family, attracts attention as an architectural highlight. The aluminum profiles and the reveal surface can be coated in all RAL colours offering further choice and exclusivity. Since the glass panes and frame feature a flush edge detail both internally and externally, and all variants are designed with an inclined surface, the range boasts not only a visually appealing seamless design, but also ensures that rainwater can run-off easily without leaving any dirty edges or water ponding. Safety is standard in the Flat Roof Access Hatch Comfort product family with fall-resistant glazing which can be walked on to a limited extent for cleaning purposes. As an additional safety feature, a light barrier is installed as standard which prevents the closing of the access hatch as soon as it detects something in the entrance area. In terms of energy, the new roof access hatch continues the tradition of all LAMILUX skylights: The overall system, which is free of thermal bridges and isothermally balanced and the option of special glazing meets modern demands for sustainability, energy efficiency and climate protection which ultimately save heating costs and minimizes condensation. All four products in this family have one further thing in common: They are delivered completely pre-assembled to the construction site, lifted onto the roof by a crane provided by the customer and then installed swiftly and easily. This minimizes the risk of errors and saves valuable time – both for the contractor and for the apartment user who ultimately gains access to the roof terrace. 
Sponsored
Aberdeen Railway Station, Scotland

Aberdeen Railway Station, Scotland

Sika Limited

Aberdeen Railway Station is the UK’s busiest station north of Edinburgh and Glasgow and is listed is listed as ‘Category A’ by Historic Environment Scotland. The station building has a glazed canopy roof, which needed a full upgrade. This included replacement of the glazed roof area and waterproofing of the gutters around the perimeter of the canopy and of the plinth that connects the gutters to the glazed roof, forming the base for all maintenance walkways.The project had to be carried out without interruption to rail services or disruption to passengers, while adhering to strict health and safety requirements.Components:Sika Liquid Plastics Sikalastic®-825 -625.Metal Primer.S-Vap 5000 SA.Sika® Primer 600.
Sponsored
177 Bothwell Street, Glasgow

177 Bothwell Street, Glasgow

Alumasc Roofing

Scotland’s Largest Single Office Building with Rooftop Running Track and 360 Panorama.A Sustainable and Futureproof Roof, Harnessing the Power of the OutdoorsBothwell Street in Glasgow is now home to an exceptionally progressive office space – making way fora new chapter in the rich history of the area. If there are any doubts about what Grade A office spacereally means, then think touchless entry, bike storerooms, lux changing facilities, an 8,000 sq. ft roofterrace, a 150-metre rooftop running track, 4 activity zones/terrace spaces and panoramic views.The project complements the sustainable regeneration programme along the Clyde Waterfront also,home to the new financial Northern European hub, firmly cementing the business district at the heart ofmodern Glasgow.GOALSThe architects at Sheppard Robson have made sure sustainability and lifecycle credentials remaincentral to the design specification. Occupants’ wellbeing has been carefully considered with a stunningpanoramic rooftop and 150m running track and general outdoor employee wellness facilities.A roofing solution was required to support the lifecycle of the building along with an excellentproduct reputation for this distinguished office space. Given the quality, longevity and environmentalconsiderations required from the roofing design, the insulation properties and warranty performancewere extremely important from the outset.CHALLENGESOur Technical department assisted the architectural and construction teams to resolve numerouscomplex design elements across the varied roof zones including running track, ballast walkways, greenzones, and pedestal zones, to determine the best roofing solution.Installation of the Davit Arm System for a building of this scale was especially important so personnel canbe safely suspended whilst working at height. This presented us with a unique challenge in providing aworkable solution that aligned with the sequence of works, whilst facilitating future routine inspection ofits base plates, and maintaining waterproof integrity without compression.Careful planning and detailing were required around roof penetrations to minimise aesthetical impact,and roof equipment was safely installed above the roof assembly.SOLUTIONThe construction comprises a composite concrete slab receiving our Hot Melt Hydrotech Waterproofing System. Offering a true lifecycle – Hydrotech high performance waterproofing, through its’ unique characteristics and installation process, now forms part of the building fabric. The result offers complete watertightness for the lifetime of the building.The building is also insulated to a high u-value target offering exceptional thermal performance and achieving a high kPa rating. This was essential to receive loadings from all components including overlying finishes, roof equipment and the end use for the building occupants.Key fire performance standards were achieved throughout including the lift overrun and lower roof terrace areas where the preferred solution was switched to our Derbigum sustainable warm roof system to maintain project performance targets.LIFECYCLE MANAGEMENTDesigned with BREEAM credentials and an EPC rating coming in at below 10 the careful focus on lifecycleconsiderations and the choice of materials throughout the building envelope is exemplary.Hydrotech hot melt is a high-performance solution containing 30% recycled content and zero productfailures in over 50 years, offering lifetime peace of mind, designed for the service life of the roof.PROJECT DATACompletion: Autumn 2022Building Type: Commercial OfficeProduct Application: Hydrotech & Derbigum waterproofing systemsCertification: BBA Approved, European Technical Approval & FM Global Class 1Architect: Sheppard RobsonMain Contractor: HFD Group
Sponsored
Riverside Studios arts and media centre - glass roof

Riverside Studios arts and media centre - glass roof

Lamilux Rooflights Ltd

LAMILUX designed, supplied and installed both the supporting steelwork and atrium glazing to illuminate the central zone of the venue with natural daylight. Structural calculations were generated to ensure that the steelwork, which was assembled from five sections, could withhold the weight of the high spec glazing used. 76 fixed panes, walkable for maintenance and weighing 65kg per m², create the 20m x 9m wide unusual curved glass roof with wall abutment detail. 3 anchor points, which forms part of the rooflight system, were installed so that maintenance personnel are able to fix their safety harnesses onto the anchor points.
Sponsored
Sliding-Over Fixed Rooflight Maximises Light In Mansard Roof Extension

Sliding-Over Fixed Rooflight Maximises Light In Mansard Roof Extension

Glazing Vision Ltd

After a particularly contentious and protracted planning process, this semi-detached, red-bricked house, part of a group of five properties that form Regent’s Mews in affluent London NW8, finally boasts an impressive third storey extension as a result of the erection of a mansard roof.The new dormer windows to its front aspect lend this 1980’s property a delightfully modern aesthetic, whilst the provision of a green roof to the rear aspect underlines its eco-credentials. The installation of Glazing Vision’s elegant sliding-over fixed rooflight above the stairwell, together with 4 additional fixed rooflights, has maximised the light streaming into this new living space, and also provided an all-important source of ventilation.Initial proposals to convert this house from two to three floors were rejected way back in 2001 by the local Planning Department on the grounds of it being “visually intrusive, overbearing massing not part of the existing architectural language and overlooking neighbours”. These same considerations faced Robinson Leigh Architects, whose track record of successful planning application had led to their appointment in 2013 by a client keen to find a solution to the planning impasse.There were a number of challenges for the architects, as they sought to design a scheme that would prove more successful through planning. The house is situated in St John’s Wood Conservation area, where restrictions on the character and appearance of all buildings are strictly applied. Normally any roof extension in this area would not be permitted and the house, indeed the entire mews, had been identified as an “unlisted building of merit”. Consequently the planners insisted that all new work to the house “must match existing original work in terms of choice of materials, method of construction and finished appearance in order to maintain the cohesion of the mews.The variety of roof forms in the mews, however, presented an opportunity for the architects to put forward their proposal of a flat-topped mansard roof as “a modern interpretation of the surrounding architectural precedent” said Leigh. Critically, the new mansard roof would also not add height above the general roof level of the neighbouring properties in Regent’s Mews, and thus would not be visually intrusive. The design of the three new dormer windows at the front of the house did depart from that of the dormer windows on the other mews houses though – they were square in contrast to the prevalent curved headed windows. However, given that they were really only visible from within the actual mews, the planners considered this alteration in form to be acceptable. Furthermore, the recessed glazing of the dormer windows ensured that the privacy of the occupants using the living spaces would not be compromised.The choice of materials also had to conform to the surrounding properties: the dormer windows were lead-clad, and the roof was tiled in Welsh slate, which softens its appearance and reduces the “apparent bulk of the structure.Another complication for Robinson Leigh related to the impact upon the large villas of Langford Place to the rear of the property. Vehement objections from these residents, who were concerned that the roof extension would shatter the illusion that they are set in extensive grounds led the architects to revise their proposal: the pitch of the northwest slope of the mansard roof was adjusted to a 70 degree angle in order to reduce its prominence in the views from these villas, particularly from 5 Langford Place. A second flat roof, which adjoined the house was removed, and Robinson Leigh extended the mansard roof to the parapet. This then gave the client more internal space, eliminated any overlooking issues, and created a more homogenous and symmetrical design.The architects cleverly designed both the main roof level of the mansard to be landscaped with indigenous flora in order to respect the planners’ preference for ecological biodiversity in the area as well as to attenuate water run-off.In conjunction with these structural requirements imposed on Robinson Leigh’s design of the mansard roof, unlocking natural daylight in the “dark zones” in the interior of the new storey was a key priority. Mindful of the rejection of the glazed roof proposal from 2001, which the planners had deemed to be too intrusive on the neighbours and at odds with the surrounding architecture, the architects sought to reduce the amount glazed by 50%, whilst simultaneously addressing the problem of reduced levels of natural daylight resulting from the recessed dormer windows.Robinson Leigh’s solution was to propose a more sympathetic glazing arrangement to the flat-top of the mansard roof, comprising four large fixed rooflights and a sliding over fixed rooflight from Glazing Vision, that would achieve the high specification they desired. These rooflights, pointed upwards to the sky, would maximise the amount of daylight entering the extension and bouncing off the hardwood timber, which had been used extensively, as Leigh points out, to “draw together several disparate elements of the interior design, such as the sliding walls, pocket doors and floor-to-ceiling shelving and cupboards”.Glazing Vision’s sliding over fixed rooflight was to inhabit the space immediately above the stairwell, which had also been lined in timber to subtly link the top floor with the ground floor and to help draw the eye upwards. Timber frames had also been used on the windows. As with the other four rooflights, Glazing Vision’s sliding over fixed rooflight needed to be made to a bespoke size – the architects required it to be the exact size of the stairwell, or indeed over-sized, so that the frames were not visible from below. Precision-engineered at the Glazing Vision factory in Norfolk, the special sliding over fixed rooflight was supplied in two sections, with an overall span of 2400mm and a width of 2240mm. The minimalist internal framework, finished in pure white rather than the standard grey, ensured that there were unfettered, sky-only views from the inside, thereby enhancing the impression of space and loft. Through the clear glazing of the Glazing Vision rooflight natural daylight absolutely flooded the stairwell, permeating also down to the lower floors.Given the stringent planning controls on the appearance of the mansard roof and the concerns of the vociferous neighbours, Glazing Vision’s sliding over fixed rooflight offered another invaluable benefit to Robinson Leigh. The footprint of the unit on the roof remained fixed, both open and close. This meant that there was no bulky additional furniture required, whilst the minimalist exterior framework was finished in slate grey to blend harmoniously with the Welsh slate roof tiles.No less important was the need for natural ventilation in the mansard roof extension. The architects were keen to create a venturi effect in the central core of the house and stairwell by channeling the airflow through the opening of the rooflight. The Glazing Vision rooflight, specified by Robinson Leigh to slide side-to-side rather than up and down, is electronically controlled at the touch of a button from inside the house, retracting the sliding section over the fixed section of glazing. Once the sliding section is fully retracted, there is a 50% clear opening in the rooflight, out towards the sky, thus providing superior air quality within the top floor, as well as intensifying the amount of natural daylight. An essential security feature of the Glazing Vision sliding-over fixed rooflight is that it is supplied with a manual override as standard.The design, approval and erection of the mansard roof extension took three years but Robinson Leigh have succeeded in updating a tired-looking 1980’s mews house with a new, sophisticated, modern exterior, that quietly complements the surrounding properties. The new third storey has exceeded the client’s needs for additional living space, and the clever use of rooflights has ensured the interior is light, bright and inviting.
Sponsored
Form follows function

Form follows function

GEZE UK Limited

‘Form follows function’ – this maybe a basic tenet of modern architecture but when it comes to designing entrances, aesthetics are inevitably a determining factor. They must contribute to the design concept, blend with other building materials, flow effectively into interiors and above all make an impact. But behind every grand entrance, is a myriad of decisions based on function: the purpose of the building itself, expected footfall, user requirements, accessibility, ventilation, heat loss, safety and security.Match that with thousands of products on the market, all with subtle differences, and it can make identifying the right solution a complex process. It’s said that people do business with people and that good relationships open doors; that’s certainly true of the specification process. Specifiers and architects build a relationship where trust is garnered through advice, guidance and sometimes compromise to identify the best solution for a project.Design and Specification of DoorsEarly liaison is helpful – consideration needs be given to the product type and application from the outset. Design based on assumption will only result in major reworking at a later stage which is never desirable for architect or client. When appraised of an architect’s ‘wish list’, I advise on the best possible options and try to drill down to a level of detail they may not have considered. For example, with a retail project, consideration will be given to maximising frontage for window display, levels of anticipated footfall and funnelling of traffic across the threshold and around the retail floor plan. In most cases, an automatic sliding door system would be an appropriate choice, and although this may seem an obvious selection, this is where we need to need to look further at its intended application and operation. A sliding door operation is usually triggered by movement sensors with side sensors for safety but if baskets or displays are put too near to where the doors open, they may cause them to operate ineffectively. Doors may be better installed with pocket screens – glass panels that the automatic doors slide in to – which are protective and also use available space without any hindrance. Automatic Doors in the Healthcare SectorPocket screens are also an essential safety feature in a hospital environment as they minimise the risk of serious injury occurring by reducing the possibility of contact with the moving door leaves and eliminating potential entrapment zones.Within healthcare, there is a range of specific needs that maybe required – reduced contact mechanisms, hermetically sealed doors for laboratories, different levels of security access and safety requirements for particular groups of patients, classed as ‘vulnerable traffic’.BS EN 16005 European Standard for Safety in the Use of Automatic DoorsAll automatic door suppliers are required to provide solutions in accordance with BS EN 16005 European Standard for safety in the use of automatic doors for pedestrian use. Under BS EN16005, automatic doors are classed as machines, so within the design users must be protected from risk of injury. Sometimes, a design aesthetic must give way to practicalities. For example, the desire to see an automatic swing door put in place where leaf size has to battle environmental factors may result in ‘sail effect’ where the wind speed makes the operator less effective so users become frustrated by the slowness of the door opening or in extreme conditions, or not opening at all. Where there is such an obvious conflict, I would prefer to provide alternative design solutions for a system that will consistently operate in the conditions in which it is installed. When it comes to specifying requirements for heritage and listed buildings, the partnership between specifier and architect really comes into its own. Products can be adapted to provide a tailor-made solution that can be accommodated into the premises without altering form or structure. Take for example, our work at Blenheim Palace in which sliding doors were incorporated for improved accessibility while maintaining the original large timber doors. These clearly could not be automated or removed so a secondary glazed entrance was created behind the original.Automatic Doors for LobbiesLobbies can enhance a building’s sustainability, but performing a vital function, doesn’t mean they have to be boring. Circular or elliptical automatic entrances look visually stunning and maximise space. A recent installation at No 1 New Oxford Street, London, saw a Moderne building enhanced by an entrance that followed the curves of the building’s original design.Whatever the project, exacting standards must be met and checks and balances put in place. The relationship between a specifier and architect is fundamental – form and function should never ‘stop at the door’. It must be considered and applied to create a grand entrance.
Sponsored
Grand Designs: Green Roof Project

Grand Designs: Green Roof Project

Polyroof Products Ltd

The Protec System was used to waterproof the domed green roof areas of this striking, sustainable house development which was featured on Chanel 4’s Grand Designs. With an ambitious vision and a tight budget, Robert and Milla Gaukroger set about transforming a dated 1980’s house overlooking Lake Windermere into a state-of-the-art, eco-conscious home. Since the house lay in beautiful hillside surroundings, in order to blend into this setting, the domed roofs of the house were to be covered with a wildflower meadow mix to provide a green roof construction.The SolutionThe Protec System was chosen as a waterproofing membrane for the roofs as it is ideally suited for green roof applications. Lightweight, flexible and highly durable, the system can easily accommodate structural expansion movements and is tough enough to resist root penetration. The Protec system was applied to over 350m2 of domed roof to provide a long-lasting waterproofing membrane.The key reasons why Eastleigh chose Protec are the same reasons that has seen it become one of the fastest growing cold-applied liquid roofing systems in both the new build and refurbishment markets. Combined with the timber cladding to the verticals of the building, the finished aesthetics of the development blended seamlessly with the surrounding areas.A warm roof build-up that can be made waterproof at multiple stages:For larger projects the Protec system can be made temporarily waterproof at two stages prior to the application of the full waterproofing system. The first stage is upon installation of the sealed, aluminium-faced vapour barrier.The second phase follows the reinforcing of the foil-faced insulation board joints with Protec resin and taping mat. This enables a much more controlled approach to the installation with a greatly reduced chance of rain causing disruption and damage during the works.Highly flexible membrane:Regardless of the size of the roof, Protec forms a homegenous membrane, without a single joint or seam and without the need for any expansion joints.RapidCure technology for quick installation:The application of Protec as a liquid, through to the curing process where a solid, tough membrane that can be walked over, takes only 30 – 60 minutes. This enables large sections of the roof to be fully completed in a short space of time.Installing the Roofing SystemsThe Protec System provided waterproofing to all flat roof areas as well as the extensive parapet wall sections. The roof areas were made up of two designs: the Protec Warm Roof System (approx 7,500m2) and Protec applied to concrete as part of an inverted roof design (approx 1,000m2).The roof installation was carried out with a planned, phased approach that was synchronised to the wider construction schedule. For the warm roof areas, the first stage was to fill the troughs of the structural metal roof deck with acoustic insulation infills that will dampen external noise within the leisure centre. Next, the crowns of the deck were primed ready to receive the self-adhesive vapour barrier.The use of a high-performance aluminium vapour barrier not only eliminates the risk of condensation within the roof, but also provides temporary waterproofing protection, which is extremely useful on larger works such as this.The Polyroof RES Insulation boards, which comprised of a two layer system totalling 170mm to achieve a U-Value of 0.14 W/m2K, were bonded using high-performance PU adhesive to the vapour barrier. Following the wind uplift calculations it was determined that mechanical fixings were not required for this application – making for an extremely rapid installation. As you can probably imagine, fixing through 170mm of insulation into the crowns of the metal deck can be a tricky and time-consuming task.A key advantage of using a tongue and groove insulation system is that the finished surface of the roof is smooth and level without any unsightly board steps that can also lead to standing water issues. The insulation board joints were sealed using Protec resin with Polymat Taping Mat 450 which, in addition to providing additional strength to the joints, also creates a temporarily waterproof layer.For the inverted roof sections, Protec was applied directly to the primed concrete/screed surface. The membrane was inspected by Polyroof Technical Services, signed off and then covered with inverted roof components. An interesting fact when using Protec in inverted roof situations is its incredible durability performance – as tested by the BBA, Protec “can provide an effective barrier to the transmission of liquid water and water vapour for the design life of the roof in which it is incorporated”.Monitoring and CompletionThroughout the duration of the contract, Polyroof Technical Services carried out regular site visits that were reported back to Interserve as part of Polyroof’s free-of-charge contract monitoring service. This enabled the client to keep up-to-date with the progress of the roof installation in detail and also provided peace of mind that the original specification was being closely followed and implemented.Polyroof worked closely with the Roofline Group during the installation, enabling the challenges were identified and solved in an efficient and coordinated manner – saving the client time and money.
Sponsored
In Plane Roof Windows Create Natural Flow Of Daylight In Minimalist Haven

In Plane Roof Windows Create Natural Flow Of Daylight In Minimalist Haven

Glazing Vision Ltd

Glazing Vision has helped enhance daylight ina cleverly constructed London home using ourPitchglaze Roof Windows.New build projects in built up areas such as Londoncan be challenging, however Clapton Roadis an example of excellent precision and wonderfullyexecuted construction. Gauld Architecturehave created the perfect modern home usinginsightful architectural detail and two GlazingVision Roof Windows. The drawings called formodern architecture at every corner, from zinccladding to wooden interiors.A single storey doctor’s surgery had previouslybeen converted to a residential building, butunfortunately the home had very little floor area.The property overlooked a private garden behindand suffered from damp as well as a lack ofprivacy from passers-by, and so an upgradewas overdue. Previous planning applications toextend had been refused, and so an alternativeorganisational approach was needed to improveresidential amenity.The proposed works consisted of splitting theaccommodation over three levels, with thebedroom and bathroom a half level belowground, and the kitchen and entrance at streetlevel with the living space a half level above toenable views out over the heads of pedestrians.The split helps to reduce the massing and theasymmetric roof is shaped to minimise impacton the natural light to the neighbour’s windowsand garden behind.Construction commenced on the property, andquickly it was confirmed the boundary brick wallcould be salvaged from the previous structuregiving a familiar and robust public facing edgeand provides a desired sleek finish to the wall.The home also boasts crisp zinc roofing and wallcladding detailing, providing a smooth transitionfrom the exposed bricks to the first storey.The Pitchglaze Roof Windows allowed GauldArchitecture to achieve a seamless junction withthe folded zinc, with the glazing set on the sameplane to give the roof a pleasing continuity.Internally, the glazing is sized so the externalviews are framed only by the lined reveals,with the roof window largely hidden giving asleek finish. The Pitchglaze roof windows wereinstalled by the contractor, an easy installationprocess is guaranteed by following our installvideo or consulting our installation guide. Muchnatural light is captured via the roof windows,positioned strategically to ensure good andeven distribution throughout, while set flushwith the zinc to achieve a surface tension andpleasing solidity to the roof planes. These highqualityelements and considered massing resultin a greatly improved contribution to the street scene.“Glazing Vision helped give guidance on the interface between the roof window and a buildup thatwe were unfamiliar with. Our local Technical Specification Manager was very knowledgeable onintegrating the roof windows into the roof.” – Kevin Gauld, Director, Gauld ArchitectureThe minimalist interior coupled with striking exterior design meet perfectly to ensure a modernand desired look. The Pitchglaze Roof Windows solved a lasting problem with the home and wereresponsible for providing the client with the sought after amount of natural daylight.If you are working on a project which requires rooflights or roof windows get in contact with us on01379 658300 or fill in our contact form.
Sponsored
Orbis OS211 and OS251 for St John Plessington Sixth Form

Orbis OS211 and OS251 for St John Plessington Sixth Form

Delta Balustrades Ltd

Products:OS211 Orbis Glass Infill Top Fix Stainless Steel BalustradeOS251 Orbis Standalone (No Infill) Powder Coated Double Handrail BalustradeContractor: Read ConstructionArchitects: AHR ArchitectsIt was great to work with Read Construction on this new two storey extension to St John Plessington Catholic College. With a total project value of £1.3m, the vision was to create a new state of the art Sixth Form Centre with significant internal renovations prior to the extension to enhance existing spaces.Deltas role in the project consisted of supplying and fitting:68m of our Orbis OS211 Glass infill Balustrade System with Stainless Steel Handrail to the internal atrium and stairs.37m of powder-coated Orbis OS211 Top Fix Glass infill Balustrade Systems to the external retaining wall.27.5m of powder-coated Orbis OS251 no infill balustrade with a double handrails to the external steps and ramps.Aside from balustrading requirements, this education sector project introduced an open plan learning centre, media room, eight new classrooms, and new break out space with a canopy for students. The outcome has exceeded expectations and created an adult-focused learning environment for sixth form students, similar to a university setting, as well as providing more space for the increasing pupil numbers at St John Plessington Sixth Form College.Image credits: Read Construction Holdings Ltd
Sponsored
Posi-Rafters - the ideal solution

Posi-Rafters - the ideal solution

MiTek Industries Ltd

DWB Hull, a licensed MiTek roof truss and Posi-Joist manufacturer, recently supplied specially designed Posi-Rafters to form the roof for a large domestic extension. Bespoke end details were incorporated into the Posi-Rafter design to make installation straightforward and to provide solid bearings on to the steel beams and walls. The build had two steel ridge purlins and a central steel at ceiling level, forming a large vaulted ceiling internally. Posi-Rafters were the ideal choice, with plated end blocks sitting directly on to the steel beams with no need for hangers.
Sponsored
Cedral Thrutone Smooth specified on 'The Garscube'; described as an ‘urban barn’

Cedral Thrutone Smooth specified on 'The Garscube'; described as an ‘urban barn’

Cedral

The Garscube is described as an ‘urban barn’; with a low slung fibre cement slate pitched roof intended to be sympathetic to the character of neighbouring properties. The building sports a single homogenous fibre cement slate skin to form both walls and roof alongside generous window openings.
Sponsored
The Ned Hotel (formely Poultry Hotel)

The Ned Hotel (formely Poultry Hotel)

AATi (Antislip Antiwear Treads International)

Former Midlands Bank building which is Grade I listed, has recently been renovated to provide a 252 bedroom hotel, restaurant with ancillary uses including bar, health and leisure facilities, event spaces, roof top terraces with a bar/restaurant and a swimming pool.
Sponsored
Windermere Jetty - Museum of Boats, Steam and Stories

Windermere Jetty - Museum of Boats, Steam and Stories

Kingspan Insulation

This multi award-winning museum has taken form with a copper clad envelope featuring high quality rainscreen insulation and pitched roof insulation.
Sponsored
Windermere Jetty Museum

Windermere Jetty Museum

Kingspan Insulation

This multi award-winning museum has taken form with a copper clad envelope featuring high quality rainscreen insulation and pitched roof insulation
Sponsored
Britmet Lightweight Roofing: LiteSlate Residential Roof Renovation

Britmet Lightweight Roofing: LiteSlate Residential Roof Renovation

Britmet Lightweight Roofing

This case study focuses on the successful implementation of Britmet's Structural Conversion System, BritFrame, and composite slate tile, Liteslate, installed by ART Contracts LTD in a residential flat roof renovation project near Llangollen. The existing roof had been plagued by ponding and water ingress, necessitating repeated repairs and replacements over 20 years. This case study explores the benefits, challenges, and outcomes of utilizing the Britframe and Liteslate, providing a long-lasting and aesthetically pleasing solution. Residential flat roofs are susceptible to issues such as ponding water, water ingress and yearly inspections, which can lead to recurrent maintenance and repair requirements. This case study showcases the utilisation of Britmet Lightweight Roofing's Britframe Structural Conversion System and Liteslate to overcome these challenges and deliver a durable, low-maintenance roofing solution. Britframe is a versatile and innovative solution designed to convert flat roofs into pitched roofs, providing improved water runoff and a new more aesthetically pleasing finish, and reduced risk of ponding water and improved thermal performance. This can be covered using a variety of different roofing materials, and Liteslate, a lightweight synthetic slate roofing slate, was specified due to its excellent weather resistance, durability, and aesthetically appealing finish. Llangollen is part of the UNESCO World Heritage Site along eleven miles of canal from Gledrid to the Horseshoe Falls and required a durable yet authentic roofing solution.The project involved the renovation of a residential flat roof that had undergone multiple repairs and replacements over 20 years due to ponding and water ingress, and constant maintenance. ART Contracts LTD was tasked with implementing and installing LiteSlate to resolve recurring issues.The Britframe System converted the existing flat roof into a pitched roof, enabling efficient water runoff and preventing ponding, thereby eliminating the risk of water ingress, and reducing the need for yearly inspections and constant maintenance to site, Britmet’s Liteslate offered excellent weather resistance and durability, reducing the need for frequent repairs and replacements while offering an attractive finish replicating the appearance of natural slate. Overall offering the advantages of lightweight construction and ease of installation.Conducting a thorough structural assessment of the existing flat roof to ensure compatibility and feasibility of the Britframe required careful analysis and engineering expertise. Coordinating the installation of the Britframe and Liteslate with existing roof features, such as skylights or ventilation systems, posed challenges in achieving a seamless integration.The implementation of Britframe has effectively addressed the issue of ponding, providing efficient water runoff and preventing water ingress into the residential property. The utilisation of Liteslate offered exceptional durability, weather resistance, and longevity, significantly reducing the need for future repairs and replacements, and thereby providing long-term cost savings. Liteslate also improved the overall aesthetic appeal of the residential property, replicating the natural beauty of slate roofing while offering the advantages of lightweight construction. The integration of the Britmet Lightweight Britframe System and Liteslate successfully addressed the challenges the building was facing. The project resulted in improved water runoff, enhanced durability, a more aesthetically pleasing roofing solution, along with a new 60+ year life expectancy. This case study emphasizes the importance of selecting innovative and reliable roofing systems to overcome recurring roofing issues and deliver long-lasting and visually appealing outcomes.
Sponsored
Architectural Beauty combines Form, Function and Aesthetics

Architectural Beauty combines Form, Function and Aesthetics

Troldtekt A/S

There has always been a relationship between design and the marrying up of form, function and aesthetics. While popularity of materials and styles comes and go over the years, how products look, feel and perform is constant. This interesting interplay is explored in the latest online theme from Troldtekt A/S, the Danish manufacturer of acoustic panels. Comprising expert articles, white papers and interviews, the ‘Architectural Beauty’ theme looks at the concept of architectural beauty and the importance of aesthetics in leading certification schemes for sustainable building. It acknowledges that it is not always possible to harmonise the aesthetic with the practical but that there are some ways in which they can be combined to provide value to a building while enhancing its beauty. Australian artist and designer Jay Dee Dearness sums it up well - “Beauty is the melding of functionality and aesthetics in just the right proportions to achieve the desired result.’ Acoustic product manufacturers, such as Troldtekt, embrace this relationship and are at the forefront of practical, aesthetic and high performance products and design. Troldtekt’s wood wool panelling is a perfect canvas allowing architects and designers to realise their most creative schemes, safe in the knowledge that acoustical performance will not be compromised.Since 1903, Copenhagen has presented annual awards for beautiful buildings, landscaping and urban spaces within the city. The Copenhagen Building Award comprises four categories - new buildings, restoration, refurbishment and urban environments. “We present the awards to honour the architects, engineers and developers behind the projects. Also, we’re keen to support projects and urban spaces that are of particular benefit to the city and its citizens”, comments Camilla van Deurs, City Architect of the City of Copenhagen and chair of the building award jury.Copenhagen’s Grøndalsvængets School (pictured), is one of the winning projects chosen by the Copenhagen Building Awards 2020. The school has undergone thorough renovation and expansion, all designed by JJW Arkitekter. It now has a fully modern learning environment where the original qualities have been preserved – and where the indoor climate is exemplary. Like most schools, it used to be noisy by nature from the exuberance of children. Now, this stunning example of architectural beauty shows how large bright spaces, natural daylight and interesting design works well with aesthetic high performance products. It also shows how wood wool acoustic panels make such designs possible while dampening ambient and reverberated noise which would otherwise be unbearable for users.  Many buildings have unique challenges relating to acoustic issues but all can benefit from acoustic panelling to help contribute towards improving the interior environment. Specified throughout the UK and Europe, the benefits of 100% Troldtekt natural wood wool panels include high sound absorption, high durability, natural breathability, low cost life cycle performance and sustainability. Available in various sizes and in four grades from extreme to coarse, the panels can be left untreated or painted in virtually any RAL colour. Samples, case studies and technical information are easily sourced from www.troldtekt.co.uk (tel 01978 664255). In addition, information on Troldtekt’s Architectural Beauty theme can be found at https://www.troldtekt.com/news/themes/architectural-beauty or https://bit.ly/3jvFmV2
Sponsored
Asbestos Roof Coating & Roof Refurbishment

Asbestos Roof Coating & Roof Refurbishment

Liquasil Ltd

This is an asbestos cement roof coating and refurbishment project completed by Liquasil Approved Installers, Nadco Ltd. The roof was first cleaned and all cracks, small holes and fixings sealed with Liquasil Non-Sag Sealer, providing a permanent seal. The entire roof surface was then coated with the BBA Approved Asbestsoeal 20 asbestos roof coating system.
Sponsored
Sandwell College

Sandwell College

Ash & Lacy

Visitors approaching the 25,000m2 Sandwell College building are immediately struck by the distinctive waveform roofs, featuring Ash & Lacy Standing Seam roof system in stucco-embossed aluminium. Pre-formed elements contribute to the high precision of concave areas and tight convex eaves. Ash & Lacy Standing Seam was installed as part of double-skin roof construction, including quilt insulation and liner panel, to achieve a U-value of 0.20 W/m2K.
Sponsored
Istanbul Airport

Istanbul Airport

BEMO Project Engineering UK Ltd

Over 420,000m² N65/500 profile was produced on site in what is, to-date, one of the largest aluminium roofs in the world. PVDF coated aluminium was used, and some areas of the roof incorporated continuous roll-formed tapers. Detailed and designed by the BEMO engineering team, complex thermal movement of aluminium panels had to be accommodated around many rooflights and penetrations
Sponsored
SMARTPLY ULTIMA OSB/4 key element in Irish commercial construction project

SMARTPLY ULTIMA OSB/4 key element in Irish commercial construction project

MEDITE SMARTPLY

SMARTPLY ULTIMA OSB/4, manufactured by Irish wood panel producer MEDITE SMARTPLY, has been used to form part of a new specialist product specified for a major roofing project in Kilroot, Ireland.
Sponsored
Protect the building aesthetic with coated hand-formed bricks

Protect the building aesthetic with coated hand-formed bricks

Vandersanden Brick

Over time bricks can discolour and lose their lustre because of the impact of wet weather, air pollution or efflorescence. The result can have a detrimental effect on a building’s visual aesthetic, compromising the architect’s design vision and reducing the value of the property for the owner. Brick manufacturer, Vandersanden is the first company to develop a viable, large scale coating solution to provide superior protection against efflorescence as well as secondary protection against the effects of pollution.Vandersanden’s automated coating formulation makes facing bricks water-repellent and resistant to the effects of air pollution and efflorescence, ensuring façades remain beautiful and untarnished throughout their lifetime. This innovative and environmentally sustainable process which also makes it easier to clean the brick, if dirt or damage does occur, has now been fully rolled out across the entire Vandersanden hand-formed brick range available to UK specifiers.Vandersanden worked with Belgian University, KU Leuven, to develop the solution which treats bricks with a special coating after the firing process. The process penetrates to a depth from 5mm to 15mm whilst retaining the original colour of the brick.The liquids contain no harmful substances or chemicals that can damage the brick or the environment and is automatically applied at Vandersanden’s manufacturing facilities in Belgium and The Netherlands.A coated brick has exactly the same pore structure as a non-coated brick and the number of pores and their size remain the same. However, as the walls of the pores are covered with a water-repellent layer, the water droplets are no longer attracted to the walls and will not be absorbed. As the pores remain open, the bricks also retain their resistance to frost.Applying the coating during the production process, eliminates the need to coat the bricks with an applicator once they have been installed, which is a highly specialised and expensive process. It also reduces the often laborious and costly task of prepping the facade for a coating and the regular maintenance required.“Creating beautiful facades that will stand the test of time remains crucial for Vandersanden,” says Jean-Pierre Wuytack, CEO at Vandersanden. "Thanks to our commitment to innovation in product design and manufacturing, we can ensure a lifetime of colour-safe brick performance for architects and their clients. We are proud of our coated solution which demonstrates how Vandersanden is the natural partner for architects who care passionately about creating the very best, most long-lasting aesthetic for their buildings.”Vandersanden coated bricks come with a 25-year guarantee and the company has worked hard to ensure these bricks can be delivered at the same cost as non-coated bricks.Vandersanden produces a vast array of high-quality bricks in different finishes and colours, ranging from reds and browns, to greys, creams and buffs that will inspire and enable the design and construction of beautiful buildings.To find out more, register for our RIBA approved CPD #2 "How to avoid brick stains and efflorescence" here CPD – Continuing Professional Development | Vandersanden
Sponsored
Rhepanol - copper here in spirit

Rhepanol - copper here in spirit

SIG Design & Technology

When it came to replacing the stolen copper, the council thought long and hard about its options for a facility that was never going to have a 24-hour security presence while respecting visitors’ sensitivities. To meet both demands, the council opted for Rhepanol fk roofing membrane finished with its copper roof paint, which patinated in a matter of weeks to its characteristic green oxidised form.
Sponsored
Honeywell Multi-roof

Honeywell Multi-roof

Liquid Roofing Systems Ltd

Product: FastCoat ProProject: Honeywell Multi-RoofProject Size: 6000m² in: Approx. 3 months
Sponsored
London Olympic Stadium

London Olympic Stadium

Brett Martin Daylight Systems

The Olympic Stadium’s transformation into a multi-use stadium has seen the specification of Marlon CS polycarbonate rooflights. The 44,000m² roof is the largest cantilevered roof worldwide and includes 4,484 polycarbonate sheets. The project was a feat of production and delivery logistics with each sheet cut to size forming 2,756 unique shapes and labelled with a unique placement code to ease installation. With the stadium width 84 metres at its deepest, the transparent roof covers all 54,000 spectator seats protecting fans from the elements as well as ensuring optimum grass growth for pitch perfect conditions.
Sponsored
Waterproofing experts seal leaky basement

Waterproofing experts seal leaky basement

Triton Systems

Waterproofing and damp proofing specialists, Severn Damp & Timber Preservation, installed a range of Triton Systems’ waterproofing materials to deal with water ingress around two skylights, formed within the concrete roof deck over a basement that extended into the garden of a domestic property. 

Showing 1-36 of 339

Feedback