"raised access floor"

55 Whitehall was previously a Government occupied office space. This iconic building has undergone a complete re-design. There was existing steel encapsulated raised access flooring throughout. Rather than remove or replace the raised floor, it was retained. Hugo18 was specified here to use as an overlay solution to the raised access floor. It offers a non-combustible, high performance substrate for a range of finishes, in this case - ceramics

60 London Wall is an icon mixed use office & retail building in the dynamic heart of London’s City, with 328,500 sq ft of grade A office accommodation situated over ten stunning floors. It was recently completely renovated and Alliance Bernstein now occupy space within the building. The existing raised access floor was overlaid with Knauf GifaFloor FHB18 making it the ideal substrate to receive a combination of ceramic tiles & micro-screed cement

The renovation project above the theatre in Barnsley, developed by HLM Architects and constructed by Code Building Solutions, successfully integrated the SubFloor Raised Access Floor system to meet the acoustic damping, height increase, and level installation requirements. The system's acoustic feet effectively reduced impact noise, rebound noise, and flanking transmission, creating a productive and comfortable office environment. The inclusion of fibre-reinforced screws and slow-grown Swedish pine ensured the system's compliance with load-bearing requirements. Contractors praised the simplicity and efficiency of the assembly process, reaffirming the system's suitability for architects and contractors in the construction industry. The SubFloor system proved to be a reliable and effective solution for achieving superior acoustic performance and efficiency in office renovations.Products:Wooden Joist 45 x 70 mmSubFloor Screw 300 mmScrew Foot Acoustic 25 Construction:Joist separation c/c 600 mmBuilding height: 112 – 364 mm Data:System weight: 4.50 kg/m²Acoustic damping: Up to 28 dB [rating according to ISO 717-2]Point Load 50 x 50 mm (c/c 600 mm):15.3 kN/m² - Next to screw over joist10.6 kN/m² - Between joists[According to SS-EN 1195:1998] Materials:Pine T0-C24Fibre-reinforced VitamidePolyamide + Thermoplastic Elastomer

Timescales: March 2021 -- Project Size: 800 m2Products: MonoTile - Finished in “Bianco Botticino”The Mills Fabrica, Cottam House, Kings Cross, LondonThe Mills Fabrica is a contemporary co-working space that has been thoughtfully designed to foster collaboration and community among sustainable conscious businesses. A key component of any modern office space is the flooring system, which can have a significant impact on both the aesthetics and functionality of the environment.In order to ensure that the flooring system for The Mills Fabrica was both visually appealing and practical, AFD collaborated closely with our contracting partners. We were able to provide the expertise needed to specify the correct finish design that would be appropriate for the space, taking into account factors such as traffic flow, durability, and maintenance requirements.The chosen flooring system was a Terrazzo raised access system, which was installed alongside matching floor tiles in other areas, as well as wall tiles. The Terrazzo Raised Floor system material is renowned for its durability, low maintenance requirements, and stunning visual appeal.The raised access system offers several advantages over traditional flooring systems. It allows for easy access to the void beneath the flooring, which is particularly useful for buildings that require extensive cabling or piping. It also provides greater flexibility for future modifications to the space, such as the installation of new electrical or data systems.By choosing a Terrazzo raised access system for The Mills Fabrica, we were able to achieve a high-end design finish that seamlessly flows from one area to the next, while still providing the practicality and functionality that is essential for a modern office space. The result is a flooring system that is not only aesthetically pleasing, but also enhances the overall functionality of the environment.

Holland Park Villas has set a new benchmark for quality in the super-prime central London residential development market. Unparalleled interior finishes combined with exceptional landscapes to show what a truly world-class team can deliver.On arrival, an impressive 30 year old Acer Palmatum tree takes centre stage. Granite paving, hornbeam trees, ornamental planting and a water wall further add to this sense of elegance and quality.This level of quality and attention to detail continues to areas not easily seen by the new tenants. Around 13,200 m2 of Soundis High density dry screed panels able to span between joists were installed by our installation partner UK Acoustic Systems as a raised access floor system. Chosen primarily for the ease of maintenance and future extensions of the underfloor network, the system is also an integral part of the underfloor heating system.Not only does this system demonstrate its practical heating properties, but the new apartments will also benefit from the pleasant acoustic characteristics provided from the floor system.

Technical representatives from F. Ball have provided flooring with a cost-effective alternative to completely removing and replacing a weakened screed as part of a flooring refurbishment at the Aberystwyth Arts Centre, part of Aberystwyth University. Upon removing old floorcoverings, flooring contractors were faced with an extremely rough screed with weak patches, possibly the result of poor installation or curing techniques, environmental factors or age, that was unsuitable for the application of subfloor preparation products and the installation of floorcoverings. Some weak sections were mechanically removed, leaving about 75mm thickness to be made up. A structural engineer confirmed that the concrete bases were, otherwise, structurally sound. New P5 chipboard was affixed to the wood subfloors with screws and glued at the joins. It is often necessary to completely remove and replace a weakened screed. However, F. Ball technical representatives called upon to conduct a site assessment were able to recommend a less costly and time-consuming solution to make the surface suitable to receive floorcoverings, including quickly raising the level of floors where sections had been mechanically prepared. Firstly, any remaining weak spots in the base would need to be removed by mechanical means along with any surface contaminants to create a clean, sound micro-textured finish. Any dust and debris should also be swept away. Moisture tests indicated subfloor relative humidity (RH) levels in the concrete subfloors were as high as 78%, meaning a moisture management solution would be required. Contractors therefore applied a single coat of Stopgap F77 solvent-free epoxy waterproof surface membrane over the entire area to obtain a continuous barrier against subfloor moisture. Flooring contractors then used Stopgap 600 Base deep section levelling compound to raise the level of floors where weak patches of screed had been removed.  It was also recommended that the chipboard over the raised access floors was checked to ensure that the surface was clean, secure and undamaged before applying a minimum thickness of 0.2mm of Stopgap Fill and Prime over the entire area.  The whole subfloor area was then capped with a layer of Stopgap 1200 Pro high performance levelling compound to create a perfectly smooth base for the receipt of new floorcoverings. The final phase of the refurbishment was to install Nora rubber sheet floorcoverings using Styccobond F48 PLUS. 

 Case StudyWAGWORKS, FULHAM, LONDON Architect: Simpson StudioConstruction Company: Fileturn LimitedProject Installation Dates: 2022Flooring Systems Installed: Bolidtop 525 Deco with textureless anti-slip (54720)Colour:  S 4030-G50Y with flake 2/52-3 Stratum were specified to install a hygienic, safe, easy to clean, scratch resistant floor to the first of this brand new up market chain of doggy day care centres in Fulham. Stratum provided the trendy space with an attractive floor to match the other natural materials and colours in the scheme. The resin needed to be installed over a metal panel raised access floor in the main circulation areas. Challenge-      The resin needed to be installed over a metal panel raised access floor in the main circulation areas.-      To select a colour and finish that would sit alongside and compliment a range of different materials chosen for the interior spaces.-      To carefully programme in the work and co-ordinate with the other trades on the project.-      To provide a floor soft enough for doggy paws, yet hardwearing and anti-slip whilst maintaining ease of cleaning.-      To arrange for products to be delivered to a busy street in London with only front access  Solution-      Bolidtop 525 Deco was selected with flake system and textureless anti-slip coating in a shade of green with black flakes. -      Cement boards were laid on top of steel raised access floor.-      To work closely with Fileturn Limited to ensure timing of delivery and programme goes to plan.   Benefits/Installation-      The Stratum system is the most visible floor finish in the main space. It covers a well used pathway, providing a soft flexible floor, with a smooth slip resistant finish.Result-      A perfect floor for heavy footfall (and pawfall) that is easy to clean and ties in beautifully with the modern, natural scheme.

New Purpose Built Premises For Acticare. This new build site offers Acticare facilities three times larger than they enjoyed before. 2596m2 of offices, workshops, product display and ancillary areas in the Hereford Enterprise Zone. Bathgate Flooring were pleased to be a part of this project. The Project – Raised Access Hereford Raised Access Flooring for this Hereford project included supply and install of 687m² of Flooring. This building features Raised Access Flooring Panels supplied and installed by Bathgate Flooring Ltd Contracts Division. These panels are manufactured in our own facility in Hereford under the brand of Permaflor.

Sustainability was a key consideration when British Sugar decided to create a new headquarters to replace its old, tired office.Once the designs were finalised, our floor fitting teams installed RMG600 raised access flooring across the ground floor, first floor and top floor of the building, totalling an area of 4,800m2, utilising our PSA MOB PF2 PS/SPU Medium Grade RMG600 panels.Around the central atrium, we fitted our innovative Attiro architectural finish over the steel-encapsulated RMG600 access flooring system. Attiro is an innovative overlay engineered timber flooring solution that is designed to enable quick and easy access to a raised flooring void at any point in that floor.

The building features nearly 2,000 m2 of bespoke gravity lay raised floor panels. These are manufactured by Bathgate Flooring in our UK manufacturing facility. They supplied panels with a real maple lacquered finish. The complete development sees 4 floors of fully accessible maple finished raised floors manufactured to the PSA MOB PF2 PS/SPU British Standard Bathgate Flooring under the Permaflor brand. The complete installation included a full aluminum entrance mat bought and installed by Paragon Mat–Works and the complete raised floor was installed to an extremely high standard by SJ Durman Flooring.

Built-In Flexibility26,000 sq. m. of Kingspan RMG600 Simploc raised access flooring.The key to creating a successful co-working environment is to build-in flexibility. To help futureproof Two Southbank Place, 26,000 sq. m. of Kingspan RMG600 Simploc raised access flooring was installed.

Stopgap subfloor preparation products from F. Ball and Styccobond F44 acrylic adhesive have been used to create a laboratory-standard flooring finish at a new facility for international laboratories operator Tentamus Group, at Pride Park in Derbyshire.Flooring contractors used Stopgap Fill and Prime and Stopgap 1200 Pro levelling compound to prepare 1500m² of metal raised access panels over two floors before installing vinyl sheet safety flooring throughout. Once the primer had cured, Stopgap 1200 Pro levelling compound was applied to create a perfectly smooth base for the installation of floorcoverings. Contractors then used Styccobond F44 acrylic adhesive to install Polyflor Polysafe Standard PUR heavy-duty vinyl safety flooring. Finally, Quantum PVC capping and coving was installed at the junctions between the floorcoverings and walls to produce a neat finish and allow for easy cleaning. 

A Raised Floor System was nominated for this project in order to ensure full access to cables / services within the flooring. This provides greatest flexibility for the long term function of any commercial building. The stunning design was created by Sheppard Robson Architects who won a design competition in 2005 to create this building. The site was developed by Linkcity with their sister company Bouygues UK as the Main Contractor. Bathgate Flooring was appointed to manufacture, supply and install over 10,000m2 of PSA steel encapsulated panels to create the raised floor system over 7 floors.

Howe Green has supplied around 400 bespoke access covers to the £150 million National Automotive Innovation Centre (NAIC) being built on the University of Warwick campus. The floor access covers were required to provide safe and easy access to building services concealed under the raised flooring. The bespoke 7500 Series Medium Duty Stainless Steel covers were specified by award-winning architects Cullinan Studio. A reduced depth was required to enable the access covers to be infilled with the same flooring used elsewhere in the raised floor system - calcium sulphate floor panels, with the stone pre-bonded

Architect Hawkins\Brown specified Howe Green 7500 Series Medium Duty Stainless Steel Floor Access Covers for one of the office spaces within BT Sport located at Here East, the new digital quarter for East London. The covers were required to address the challenge of easily and safely accessing drainage junctions located beneath a raised floor system in the corridors of the building. The 7500 Series were specified with stainless steel Z profiles to provide additional support to the access cover within the raised floor. The access covers were initially covered with plywood and then infilled with a vinyl flooring finish.

Bloomberg’s European Headquarters opened with excitement in October 2017. The marquee building in the heart of London provides new office space for Bloomberg’s 4000 London based employees. We installed over 37,000m2 of Kingspan raised access flooring and 34,000m2 of Kingspan Attiro real wood engineered floor. The combined systems allow quick and easy access to the steel encapsulated floor panels and the underfloor void whilst delivering 98.5% score against the BREEAM sustainability assessment method.

Kingspan RMG600 Raised Access Floor panels are being utilised across multiple state-of-the-art teaching and learning facilities including specialist laboratory spaces.The flooring solution provides the facility management team with a great deal of flexibility – rapid access to the void, enabling reconfiguration, fault-finding or simply maintaining the many metres of cables and pipework that are required to service such a leading-edge education building.

Havas Media Group is a global network of entertainment, media and communications agencies, that has recently opened its new ‘HKX’ village in Pancras Square, London to unite twenty-four of its UK operations in a stunning new European headquarters. Given the nature of the fast-moving office environment at Havas, the combination of 14,000m2 raised access floors and 3,000m2 of Attiro magnetic engineered timber (supplied by Fieldmans, one of Kingspan’s supply and install partners) allows for the easy reconfiguration of office layouts and furniture, as well as providing instant access to the underfloor void.

Two Kingspan raised access floor systems were used, over a 25,000 sq. m. area, which helped the building achieve LEED Gold. A PSA medium grade RMG system was used in office spaces and PSA heavy grade FDEB_H system was installed in server rooms.

Cableplan supplied and installed over 20,000 sq. m. of Kingspan raised access floor solutions.This 35,000m2 office facility incorporates 14,000 sq. m. of RMG Simploc (screw down) and 6,350 sq. m. of RHG Simploc (screw down).

A BREEAM Excellent development with a Wired Score Platinum Certification, the Ewart has exemplary sustainable and technology features throughout, including Kingspan PSA grade raised access floors.Working with our certified installation specialists in Northern Ireland, Drew Wylie Building Services, we supplied circa 25,000 sq m of Kingspan RMG600 & FDEB_H systems, both tested in accordance with the PSA specification.

79 of Howe Green’s 7500 Series aluminium access covers were specified for Eco-Friendly primary school, St Bernadette’s in Antonshill. Council architects required a solution to access essential services housed in raised flooring including the school’s sprinkler network, hot and cold water supplies and electric and data cabling. The covers were installed by A. Andrews and Sons to cover a continuous run of 75 metres of floor space with additional multipart units also fitted onto adjoining legs. The access covers were designed to be in-filled with industrial grade carpet to match the surrounding area.

BackgroundThe Injured Jockey Fund (IJF) Oaksey House rehabilitation centre in Lambourn, Berkshire, was opened in 2009 by the IJF Patron, HRH The Princess Royal. Oaksey House provides specialist rehabilitation treatment for physical and neurological injuries, it has a fully equipped gym which includes a state-of-the-art anti-gravity treadmill. The centre has respite accommodation available for those receiving extended treatment and their carers. Educational courses on fitness and nutrition for the general well-being of young and aspiring jockeys are also on offer.Oaksey House is not only a rehabilitation centre for jockeys, but anyone with physical or neurological injuries. Although the centre was only opened in 2009, it was decided that a refit was required to make improvements to further support the people that pass through its doors. The refit included moving the gym to the first floor and building a hydro pool on the ground floor.The ChallengeRelocating the gym to the first floor was no easy task, primarily because the building structure was composed of a steel tray and concrete base. To accommodate gym activity, the floor build-up would need to be enhanced to prevent noise and vibrations travelling through the building.As a charity, the IJF had limited funds to work with, so flooring specialists, Sport & Fitness Flooring, worked with the architect and an independent consultancy to identify an effective solution within the specified budget. Moreover, the floor had to be designed to meet the needs of four distinct areas: a cardiovascular zone, a running track, main gym area and an entrance lobby.The project was unique because various performance requirements had to be met across the four areas but the floor level needed to be consistent throughout to make it accessible for wheelchair users. Sport & Fitness Flooring consulted CMS Danskin Acoustics – Gym Flooring Division to advise on potential solutions to address this challenge while remaining cost effective.The SolutionCMS Danskin Acoustics worked with Sport & Fitness Flooring to undertake on-site subjective testing to determine the level of sound reduction and vibration control that would be required. The primary objectives were to prevent vibration travelling into the structure of the building thus resulting in potential structural damage or unwanted noise levels on the ground floor below. Samples of different build ups were provided by CMS Danskin Acoustics on site for testing within a day of the initial request.“Throughout the planning stages CMS Danskin Acoustics acted as a ‘springboard’ for our ideas. They were extremely helpful in offering their expertise to find solutions to meeting the performance requirements of the floor,” said Darren Wood, Director of Sport & Fitness Flooring.Sport & Fitness Flooring worked with CMS Danskin Acoustics to identify a way of raising the floor in different areas to meet a consistent 84mm thickness throughout, without having an adverse effect on the acoustic performance of the flooring. CMS Danskin Acoustics developed a bespoke specification for the four key areas, with solutions subsequently presented to the architect and approved for use on the project.The ResultCMS Danskin Acoustics was able to meet the performance, volume, and diversity of product needed to effectively treat the floor at a competitive price and on budget.In the main gym area, a high-performance combination of everroll® Multitile (everroll Multitile 27mm) was bonded to Regupol® 40/80 Acoustic Foam and fitted to Regupol® Vibration 300. In the cardiovascular zone, Multitile (everoll Multitile 27mm) was bonded to Regufoam® 270 acoustic PU foam and fitted to ply which was adhered to Regupol® Vibration 300. The track was treated with BOK Sprint track bonded to a everroll® Impact Pad elastic layer, ply build up and Regupol® Vibration 300. Finally, concrete effect Luxury Vinyl Tiles (LVT) were used to create a purpose-built ramp up to the 84mm floor level from the entrance lobby.On day one of the build schedule, there was a timed delivery of the material. The bespoke order was exactly as specified and allowed installation to begin immediately with no delays. CMS Danskin Acoustics attended Oaksey House to provide expert on-site support and technical guidance on the installation. The project finished a week ahead of schedule, on budget and the flooring met all the performance requirements that were specified. Crucially, a consistent floor level was successfully achieved throughout the gym.“It’s quite common for suppliers to just sell a material and move on, but CMS Danskin Acoustics deliver a first-class expert and professional service from initial technical involvement, to tracking, delivery, installation and sign off. We regularly work with CMS Danskin Acoustics on various bespoke projects and are always confident in the solutions and expertise provided,” concluded Darren.

Stopgap 1200 Pro levelling compound and F46 pressure sensitive acrylic adhesive have led the way in refurbishing floors at Heythrop Park, near Chipping Norton in Oxfordshire, following its acquisition by Warner Leisure Hotels, as part of a four-year, £40 million renovation.Flooring contractors were commissioned to install a range of floorcoverings throughout the site’s public areas, including in the 300-year-old, Grade II-listed manor house, which is set in a 440-acre country estate, as well as the adjoining hotel complex.The project included work in the reception, two ground-floor theatres, bar, restaurant and lounge areas, as well as connecting staircases and corridors, in the modern part of the hotel.Stopgap 1200 Pro high-performance levelling compound was used to raise subfloor levels so that LVT floorcoverings and inlaid carpet would sit perfectly flush with previously installed ceramic tiles, with areas divided by custom-made CAT brass edging strips. Stopgap Micro Rapid fast-setting, fast-drying floor finishing compound was used to address minor subfloor imperfections.Stopgap 1200 Pro was also used to create a perfectly smooth surface for grey loose-lay Forbo Coral carpet tiles in the entranceway of the reception, where heavy-duty made-to-measure Newhay grid entrance well matting was installed.Behind the reception desk, Plusfloor concrete-effect luxury vinyl tiles were installed with Styccobond F46 pressure sensitive adhesive, which provides a high bond strength that increases as it is trafficked, as well as strong initial tack, meaning that tiles or planks won’t move around while working. The indefinite open time offered by the product negates the risk of late placement, another advantage when there’s complex designs and patterns.Contractors installed bespoke Brintons carpet in a small seating area on one side of the reception and in front of the entrances to the larger of the hotel’s two ground-floor theatres and Late Lounge Bar, as well as on the steps and accessibility ramp leading from the reception to the 120m2 area, using a dual bond system. This involved using Styccobond F3 to create a permanent bond between carpet and underlay, with the Styccobond F40 providing a peelable bond between the underlay and subfloor.In the theatre, where guests can enjoy live music, drama and comedy performances, Stopgap 1200 Pro was used to patch repair existing subfloors, including where stanchions had been removed, before installing custom-made dark black and blue Newhay carpet.Bespoke Newhay carpet was also installed in the Late Lounge Theatre, which was also furnished with an Amtico wood-effect LVT dancefloor adhered with Styccobond F46. Styccobond F46 was used to install Harlequin Standfast high-performance vinyl sheet on both of the theatres’ stages.Amtico Signature basketweave, wood-effect LVTs were installed in the Late Lounge Bar up to seating areas with bespoke Newhay carpet and ceramic tiles around the bar, as well as on the steps leading to the Late Lounge Theatre. A feature was created in the centre of the room with a large area of herringbone wood-effect LVTs and a border of Amtico Signature Cirrus Twilight grey planks.Similarly, in the first floor ‘Pub and Kitchen’, Karndean ‘Van Gogh’ salvaged wood-effect LVTs were installed up to the bar area, where a border was created using Karndean ‘riven slate’ grey ‘Knight Tiles’, and areas with tables and chairs, where Alternative Flooring ‘Anywhere Rope’ natural carpet was installed. The LVTs were installed up to ceramic tiles around the bar and seating areas with bespoke Newhay carpet.Plusfloor wood floorcoverings were installed on the main staircase leading from the reception to the first and second floors, extending onto the first floor landing and lounge area, using Styccobond B95.Where there were steps in the areas being renovated, including the main staircase, Stycco Flex rapid-curing, flexible tube adhesive was used to affix custom-made CAT brass stair nosings.

F. Ball’s Stopgap Fill and Prime thixotropic primer and Stopgap 1200 Pro levelling compound have delivered a fast-track solution for installing floorcoverings in one of the largest small-animal referral hospitals in Europe.Flooring contractors installed vinyl safety flooring and luxury vinyl tiles throughout a total area of 1100m2 at Southfields Veterinary Centre, in Basildon, Essex.Requiring a timesaving solution for working over chipboard as an alternative to overboarding with plywood, the contractors contacted their regional F. Ball technical representative, who advised preparing subfloors with Stopgap Fill and Prime prior to the application of a suitable levelling compound.Stopgap Fill and Prime is a cement-based primer that is designed for use over raised-access panels and flooring grades of plywood, chipboard, MDF and oriented strand board (OSB 3). It has a thixotropic consistency, meaning that it flows freely when stirred but sets to a gel-like consistency on standing, enabling it to fill gaps between panels to prevent imperfections transferring to the finished installation.Stopgap 1200 Pro levelling compound was then applied in all areas to create a perfectly smooth base for floorcoverings. The product is fast-setting and fast-drying and can also be applied over old adhesive residues, in which case there is no need to prime subfloors beforehand.Polyflor vinyl safety flooring was installed in the treatment rooms using Styccobond F44 solvent-free acrylic emulsion adhesive, which is designed to give a strong initial tack, high bond strength and a long open time.In the canteen, Forbo Allura Flex Wood luxury vinyl tiles were adhered using Styccobond F46 pressure sensitive adhesive, which provides instant grab, preventing floorcoverings from sliding as tiles or planks are subsequently placed. The adhesive is designed to minimise the incidence of trowel serrations showing through thin vinyl flooring and potentially affecting the finished appearance of the installation. Styccobond F46 was also used to secure Polyflor vinyl safety flooring in the corridors connecting the treatment rooms.Capping and coving were installed in the corridors using Styccobond F60 contact adhesive. The formation of an instant bond makes it suitable for securing floor and wallcoverings on vertical surfaces.Commenting on the project, Ben Montgomery, head of projects at Veatu Flooring, said: “While we use a lot of F. Ball products and they’re our first choice because of their quality and availability, it’s the first time we’ve used the tech rep service. They came out and provided a tailored specification for the project we were working on, which ended up saving us a lot of time and expense.”Before any floor preparation work was carried out a moisture test was conducted, which determined that subfloor moisture levels were low enough that a moisture management solution was not needed.

This elegant extension, designed by award-winning practice Chris Dyson Architects, not only significantly increases the footprint of the client’s North London home, but also delivers a uniquely versatile living space for use all year round. The pure scale and the innovative use of glazing for the extension as well as for the new top floor dormer cannot fail to impress, and yet the architectural language reflects the calm, understated style for which Chris Dyson Architects have become acclaimed. Bespoke rooflights, supplied by Glazing Vision, not only flood the ground floor with natural light, but they also help moderate the temperatures throughout the house.The client was seeking to refresh the property by adding an extension to the rear, which would enable the existing ground floor spaces to be connected through a single flowing space, creating a welcoming and flexible environment for hosting their growing family and for entertaining guests.The top floor bedrooms were accessed via a narrow hallway where a small dormer window provided minimal daylight and restricted views of the garden. Creating a living space on this floor where the family could relax and enjoy some downtime was also part of the client’s brief to Chris Dyson Architects.Glazed openings for harmonious integrationThe design for the extension was a solid and robust structure that would integrate harmoniously with the main body of the house and would serve as more than just a “sunroom”. The traditional proportions of the classic orangery have been achieved by Chris Dyson Architects through the use of precast stone columns and five glazed openings, which connect the new internal space with a raised external terrace leading to the rear garden.New internal glazed doors enable the formal dining room and the breakfast room/kitchen to be opened or closed to the main orangery space, providing flexible spatial and acoustic barriers without compromising the natural light entering the entire area.For entertaining and parties the space is ideal, allowing people to freely move between rooms and out onto the garden terrace.Maximising daylight, moderating room temperaturesThe insulated walls and the energy efficient double-glazing of the orangery would serve to keep the space warm in the winter months. In the summer opening the doors would help keep the space comfortable. To further regulate the internal temperature a full width rooflight from Glazing Vision was installed, equipped with sliding elements. Chris Dyson Architects chose Glazing Vision due to the high quality of their products and their ability to create beautiful bespoke solutions.The architects worked closely with Glazing Vision’s specialist CAD designers and technicians to design custom rooflights to meet the exacting requirements of the orangery roof as well as the new glazed dormer.Given the exceptional size of the extension roof, 3320mm x 10900mm, Glazing Vision’s factory precision-engineered a special Dual Sliding Over Fixed Rooflight, comprising 8 sections. The 2 end sections were manufactured to slide over the 6 fixed central sections, traversing in a side-to-side, rather than an up-and-down slope operation.Normally supplied in a RAL7015 slate grey to the exterior and RAL 9010 pure white to the interior, the entire framework of this super-sized Dual Sliding Over Fixed Rooflight was supplied in a bronze finish, which was a key part of the architectural design.With such a complex rooflight, with fixed and sliding sections, a quiet and efficient operation was fundamental to the specification. Electronically controlled at the touch of a button, each of the 2 sliding sections of glazing can be retracted easily, revealing generous openings, and sky-only views. An added safety feature is the manual override should the electronic control system stall.On the top floor the existing narrow hall has been opened up and extended to create a new living space. The bespoke glazed dormer by Glazing Vision provides expansive views across the garden, and an abundance of natural light. A large Bi-parting 1-wall Box Rooflight, measuring 4850mm in the width, was set into the sloping roof. At a total height of 1700mm the rooflight also enhances the feeling of loft in this relaxation area.Supplied in 6 sections, the Glazing Vision Box Rooflight was configured such that the 2 central sections were bi-parting, sliding over 2 adjacent fixed sections. Two additional fixed sections and 2 fixed end panels completed this fully glazed, customised dormer. In order to provide privacy from the neighbouring properties, and conform with Planning Regulations, these end panels were manufactured in satin etched glass.Once the 2 sliding sections are retracted, there is a handsome opening, giving an almost balcony-like effect, and encouraging the user to appreciate the garden vista during the day and to delight in the starry landscape at night. The Glazing Vision Bi-parting 1-wall Box rooflight helps to regulate the temperatures and the air quality throughout this upper floor, allowing copious amounts of fresh air to circulate when it is open. Rain sensors, offered by Glazing Vision as optional extras, were also installed to provide additional security should the weather suddenly turn inclement.Chris Dyson Architects are to be complimented on the sensitive integration of a contemporary orangery in this family home as well as on the bold extension of the top floor. Form and function are in perfect harmony and the Glazing Vision rooflights will ensure that there is an ever-changing canopy to the spaces below!This project was shortlisted for the AJ Specification Awards, in the ‘Doors and Windows’ category.

Products from F. Ball have been used to create a hygienic flooring finish as part of a refurbishment at The Doctors Laboratory, in Salford, Manchester.Flooring contractors used Stopgap Fill and Prime 700 Superflex flexible levelling compound to prepare 1500m² of metal raised access panels before installing vinyl sheet floorcoverings and coving. Once the primer had cured, Stopgap 700 Superflex flexible levelling compound was applied to create a perfectly smooth finish for the receipt of floorcoverings. With the subfloor preparation complete, the flooring contractors could install Tarkett IQ Granit Acoustic Vinyl sheet throughout the entire area using Styccobond F46 pressure sensitive acrylic adhesive which possesses a high initial tack, making it ideal for the installing of floorcoverings over larger areas. Finally, the contractors used Styccobond F66 contact adhesive to install PVC coving. 

When adhesive-free flooring was specified for this HQ office refit, the contractor needed an installation method that was compatible with carpet from Desso, LVT from Tarkett and woven vinyl tiles from Bolon. IOBAC Magtabs MT4+ were the ideal solution for installation onto raised metal access flooring.

Sustainability is key for this company. So when an area within their prestigious London office needed to be refurbished, both the architect and client specified adhesive-free flooring.IOBAC MagTabs were used to install ShawContract carpet tiles onto raised metal access flooring.

The University of Central Lancashire has enhanced its state-of-the-art facilities by reclaiming and naturalising rooftop and ground-level spaces utilising Logic’s innovative approach.UCLan Preston Campus is in the heart of the city, and like many inner-city University spaces, it was surrounded by concrete. There is a push to naturalise educational environments with limited access to nature and add it in ways that enhance the usability of the facility. Any design must create more space for students to study, socialise, and generally use the University campus, reclaiming under-utilised areas. The building was created to feel like a student space and provide them with a feeling of ‘ownership’, including design aspects that offered variety, from vibrant social spaces for collaboration to quiet study areas. It was determined that the best use of the outdoor space surrounding this innovative campus was to add planters with raised planter edging and seating on the ground floor and rooftop podium. Using sustainably sourced timber aligns with the eco-friendly ambitions of the campus while creating a natural and warm finish to the heavily urbanised area.  

Client: Meggit Avionics, Fareham Design & Build Contractor: Metpark Specialist Contractor: Thelwell Flooring Main Products Used: Emseal DSM SystemMeggit Avionics produce flight data sensors, systems and displays for all types of civil and military aircraft, including helicopters and unmanned aerial systems (UAS) drones. At the firm’s expanding facilities in Fareham, their success meant that they needed to find a way to provide more parking for the growing number of people working on the site. The solution was provided by Metpark UK, in a complete car park design and build contract, that provided a whole new parking level, raised and built directly above their existing surface car park, which added a further 63 parking spaces. This included a new structural steel frame, with steel access stairs, perimeter crash barriers, and lighting, plus composite steel and concrete decks with waterproof deck surfacing. The structural design used 40mm wide expansion joints brought right through the composite deck to allow the anticipated high joint movement capability required, which was up to +/- 50% (i.e. total 100%). The Emseal DSM system was selected and used to securely seal the exposed expansion joints as it can easily meet and accommodate all these requirements. Emshield DSM is a prefabricated movement joint that is easily installed from above, so other trades can continue uninterrupted below. Additionally it is bonded into position with a structural epoxy adhesive, so there is no potentially damaging drilling required into otherwise sound concrete elements of the new decks.

Client prioritises sustainability with IOBAC MagTabs & new carpet tile kids on the BLOQRead how sustainability was prioritised at Oxford Technology Park, a major new office and research project, by specifiying adhesive-free MagTabs and BLOQ carpet tiles on raised metal access flooring.

In May 2018, Australia’s visionary theatre, La Mama, was destroyed by fire. Thanks to the generosity and hard work of The La Mama Community, this iconic theatre has now reopened to the public and UltraScape are delighted to have played a part in its restoration.BackgroundLocated in Victoria, Australia, La Mama Theatre is home to responsive, inclusive and diverse independent theatre making. With a reputation steeped in visionary arts, La Mama Theatre is the number one destination for audiences to discover the next generation of theatre artists.The ChallengeA fire devastatingly destroyed this much-loved theatre in May 2018. The damage was so extensive, La Mama theatre needed to be completely rebuilt. Part of the restoration included an additional structure to the front of the theatre and new paved area.The SolutionThe incredible La Mama community raised over $3,400,000 to help restore the theatre back to its former glory. To grout the Recycled Brick Paving at the theatre, Instarmac International’s Australian partners, and specialist paving distributors, Prolific Stone International, supplied UltraScape flowpoint smooth.Greysea Group, the contractors completing the paving installation, have been using flowpoint since it was first introduced into Australia in 2020.UltraScape flowpoint smooth is a flowable grout which allows for large areas of paving to be grouted quickly. Suitable for joints from 3mm to 50mm and as deep as 200mm, flowpoint smooth has been developed over a number of years to provide a durable finish which will not crack or stain – even in the hot Australian temperatures.With an initial set after just 15 minutes, and a walk on time of one hour, it is unsurprising that flowpoint smooth has become synonymous with fast application, cost-effective and robust jointing.UltraScape flowpoint is available in four varieties – original, eco, smooth and fine – and two colours – Natural Grey and Charcoal. UltraScape have jointing solutions for all designs and tastes.ResultsLa Mama Theatre opened to the public in December 2021 with great applause. The newly refurbished theatre is fully accessible, has a dedicated rehearsal space, new bar, green room and mezzanine floor for their next generation of theatre artists to perform on.

BACKGROUNDTTP has operated from Melbourn Science Park for thirty years, but a new facility was needed to bring people together for collaboration as the business has grown. The new buildings would incorporate state-of-the-art labs, offices and manufacturing spaces, but key to the design were a variety of indoor and outdoor workspaces to stimulate TTP’s people to think differently.BRIEFThe development featured three separate, differently shaped buildings - The Hive, Tech Barn and TheExchange - that presented design challenges such as curved walls and an open plan layout requiringacoustic enclosures. Features such as an exposed roof slab, concrete columns and a raised-access floor system to house mechanical ductwork required special design elements to soften the concrete surfaces.

Over 50 Howe Green 7500 Series access covers were made to order for one of London’s popular tourist attractions - The Cutty Sark, as part of an extensive refurbishment project. The aluminium covers were manufactured with bespoke Z-section supports to provide a safe, reliable route to essential ventilation ducting used to keep air circulating in what is effectively a large void under the historic clipper. The covers were fitted into raised flooring within the new museum facility. The 7500 Series are designed to withstand high levels of pedestrian traffic.

Rush Green Primary School, LondonClient: London Borough of Barking & DagenhamProduct: The Coniston Wall Mounted CanopySize: 16.3m x 2.2mFrame Colour: Hipca WhiteInstallation Date: June 2023Brief Having worked with the London Borough of Barking and Dagenham before on a number of projects, they contacted us again regarding their most recent project at Rush Green Primary School. The school which is located in Dagenham were having works completed which included a single storey extension, internal alterations, and refurbishment. As part of the works, they required a wall mounted canopy in their quad courtyard area to provide shade and shelter all year round.Proposal As requested, we provided an estimate for a Coniston Wall Mounted Canopy with a length of 16.3 metres and a projection of 2.2 metres. Because the Coniston is mounted to a wall, it requires a suitable wall to fix to; the building at Rush Green Primary School was a block construction which was covered with render, which is one of the many ideal wall constructions for the Coniston’s requirements. In the case where a wall may not have a suitable construction for a wall mounted canopy, we can supply the Coniston as a free-standing canopy with rear posts. Alternatively, we also have a number of free standing canopies that are similar in appearance to the Coniston which are the Grange Free Standing Canopy and for those with lower budgets, the Grange Junior Free Standing Canopy.Solution Upon comparing our canopy quotation to two other companies, an order was placed for our Coniston Wall Mounted Canopy in May 2023.At the pre-site stage, there was a number of points to be discussed outside of the usual specifics which were:Foundations: Unless otherwise stated, foundations are included in all our canopy quotations. The flooring in at Rush Green Primary School featured raised decking, so we needed to investigate the area underneath the decking to check it was suitable for our foundations and they were.Access and Obstructions: The quad area features a pond which could have made an obstruction however, it was agreed that the pond would be covered over with strong boards so we could work over it.The canopy was installed at the start of June 2023 as scheduled with no problems along the way.If you have a similar project in mind, contact us today to request a free estimate or discuss a bespoke canopy with us.